trinityboringsolutions.com

Buffalo Gap Texas Directional Boring: Clairemont Soil, Elm Creek and BNSF Railway

Quick Answer: The City of Buffalo Gap owns the public water system, while AEP Texas North and Taylor Electric Cooperative report electric service in Taylor County, so we confirm the line owner before routing a bore beneath FM 89. Trinity Boring Solutions does directional boring, also called horizontal directional drilling (HDD), in Buffalo Gap and across Texas for routes involving FM 89. Buffalo Gap is 308 road miles from our Yukon, Oklahoma main office, a distance that affects mobilization for work near West Street. The USDA soil survey maps sandy clay loam at about 40 inches below the surface across 37 percent of the town, so we plan reaming and fluid for clay as well as sand.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Buffalo Gap bores at a glance

  • Incorporated city in Taylor County, Texas. Population 633 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 308 miles, about 6.1 hours of driving.
  • Ground: Clairemont soil is mapped on 19 percent of the area, with sandy clay loam about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 15 percent of the area.
  • Highways inside the boundary: FM 89, FM 1235 and FM 613. State permit office: TxDOT Abilene District.
  • Railroad track inside the boundary: BNSF Railway, with 2 mapped street and rail crossings.
  • Named streams inside the boundary: Elm Creek.
  • Public water: City of Buffalo Gap, surface water bought from another system.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who does directional boring in Buffalo Gap near FM 89?

The City of Buffalo Gap owns its public water system, and AEP Texas North and Taylor Electric Cooperative report electric service in Taylor County; confirming the line owner helps set a safe route before work near FM 89. The Census Bureau Vintage 2024 estimate puts Buffalo Gap at 633 people. We install water, sewer, gas, electric conduit and fiber on routes along streets such as Pecan Street or where a crossing needs to pass beneath FM 89.

Our main office is in Yukon, Oklahoma, and Buffalo Gap work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our longest bore ran roughly 4,100 feet with 48 inch pipe beneath the Arkansas River in Tulsa. By comparison, a proposed service bore along Pecan Street is a smaller scope; our work ranges from 3/4 inch service lines to 48 inch casing and from 10 feet to 5,000 feet.

Compact Ditch Witch drill rig boring a new utility line across a front yard on a residential street in Edmond, Oklahoma
Our compact Ditch Witch drill boring a new utility line across a front yard on a residential street in Edmond, Oklahoma. Photos on this page are from our jobs in Oklahoma and Texas.

What kind of ground does Buffalo Gap’s Clairemont soil present?

The USDA soil survey maps Clairemont silty clay loam across 19 percent of Buffalo Gap, with Gageby clay loam, Shep loam and Colorado loam also mapped in town. About 40 inches below the surface, sandy clay loam is mapped under 37 percent of the area, while silty clay loam is mapped under 19 percent. The mapped clay content averages 31 percent at that depth. These are soil survey patterns, not test borings, so the actual route still needs field checks. Clay can stick to a reamer and grip pipe, while sandy material can loosen behind the drill.

USDA soil survey, inside the Buffalo Gap city limitsWhat is mapped
Soil series mappedClairemont 19 percent, Shep 18 percent, Gageby 14 percent, Colorado 13 percent and Knoco 7 percent
Texture at the surfaceloam 31 percent, clay loam 24 percent and silty clay loam 23 percent
Texture about 40 inches downsandy clay loam 37 percent, silty clay loam 19 percent and loam 13 percent
Engineering class about 40 inches downlean clay (CL) 56 percent, clayey sand (SC) 22 percent and fat clay (CH) 8 percent
Average clay content about 40 inches down31 percent
Bedrock mapped within 60 inches15 percent of the area (4 percent hard rock, 11 percent weathered rock)
Seasonal water table within 60 inches0 percent of the area
Flood prone soils50 percent of the area
High corrosion risk for uncoated steel17 percent of the area

Bedrock is mapped within 60 inches across 15 percent of Buffalo Gap, including 11 percent mapped as weathered bedrock and 4 percent as hard bedrock; the typical mapped depth is 19 inches. That calls for checking the route rather than assuming uniform drilling. Seasonal water tables are not mapped within 60 inches, but flood prone soils cover 50 percent of the area, including creek ground near Elm Creek. Across Buffalo Gap, mapped high steel corrosion risk covers 17 percent, so we account for that exposure when planning underground work. The geologic map includes Holocene Alluvium along streams and Early Permian sedimentary rock, so changing material may affect the bit and casing plan.

What does it take to bore Buffalo Gap’s sandy clay loam?

Buffalo Gap’s mapped mix of sandy clay loam and silty clay loam calls for measured fluid and staged reaming. Near Elm Creek, we also plan the bore depth around the channel and the mapped flood prone ground.

  1. Clairemont silty clay loam can cling to the reamer, so we use a thinner fluid mix, add polymer as needed and open the hole in stages.
  2. With sandy clay loam mapped under 37 percent of Buffalo Gap at about 40 inches, we support the bore wall with drilling fluid and have the pipe ready before the final ream.
  3. Where the route approaches mapped bedrock near Elm Creek, we check depth and pitch as the material changes because the drill head can move at a soil to rock contact.
  4. Before drilling near a marked utility along West Street, we hydrovac pothole it to verify depth; the surface locator tracks the head and we log depth and pitch.
Walkover locator at the edge of the wetland on a directional bore at the Cimarron site in Logan County, Oklahoma
Walkover locator at the edge of a wetland on a directional bore in Logan County, Oklahoma.

What is in the way of a new line in Buffalo Gap near West Street?

A Buffalo Gap bore may need to pass beneath FM 89, FM 1235 or FM 613, the state highways mapped inside town. West Street is the longest named street at 1.38 miles, followed closely by Pecan Street at 1.37 miles; Summit Avenue runs 1.04 miles. The town has 19.95 public road centerline miles in all. For a route along these streets, a bore can keep pavement and driveways uncut, with entry and exit pits placed in dirt where the site allows.

CrossingTypeMapped extentWho has a say
FM 89State highway3.4 roadway miles insideState highway office
FM 1235State highway1.1 roadway miles insideState highway office
FM 613State highway0.4 roadway miles insideState highway office
BNSF RailwayRailroad1.85 track miles insideThe railroad
Elm CreekStream2.57 channel miles insideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

BNSF Railway has 1.85 track miles in Buffalo Gap, and two mapped street and rail crossings make track clearance a route issue. Any crossing of its track needs an agreement with the railroad that owns it. Elm Creek runs 2.57 channel miles through town, with three mapped street crossings of named streams. The unnamed drainage adds another mapped water route to consider. No lakes or ponds are mapped within one mile, and a creek crossing is checked for federal waterway jurisdiction during planning.

Whose permission does a Buffalo Gap bore near BNSF Railway need?

FM 89, FM 1235 and FM 613 are state highways, so work in their right of way goes through TxDOT, with the TxDOT Abilene District reviewing the application. The utility owner, not our crew, files in TxDOT’s online RULIS system; we prepare the bore plan and profile for that filing. TxDOT requires boring or tunneling beneath existing highway pavement, with crossings encased and the bore extending beneath all travel lanes on rural highways. Buffalo Gap is incorporated, so its city streets belong to the town. A BNSF Railway crossing needs the railroad owner’s agreement, and an Elm Creek crossing is checked for U.S. Army Corps of Engineers jurisdiction.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

What is already in the ground in Buffalo Gap near the City of Buffalo Gap system?

The City of Buffalo Gap public water system uses purchased surface water and serves 1,502 people through 602 service connections. AEP Texas North and Taylor Electric Cooperative report electric service in Taylor County, but that does not establish which provider serves a specific address. We confirm the line owner before planning an electric conduit bore near West Street or another street, then route around marked utilities.

Line ownerWhat it isSourceSize
City of Buffalo GapPublic water systemSurface water bought from another system602 connections, 1,502 people served
AEP Texas North and Taylor Electric CooperativeElectric utilities reporting service in Taylor CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

For underground planning in Buffalo Gap, we consider the American Community Survey 2019 to 2023 five year estimates placing the median housing year at 1972. For underground work in Buffalo Gap, we consider that 39 percent of homes were built before 1960, 36 percent from 1960 to 1999 and 25 percent in 2000 or later. A replacement route near older homes on Pecan Street may involve existing buried lines, while a new service has its own route. We hydrovac pothole marked utilities on the bore path before drilling near them; paint shows position, not depth.

Large HDPE conduit reels staged on a Rotate A Reel trailer for a fiber and utility installation in Oklahoma
HDPE conduit reels on a reel trailer for a fiber and utility installation in Oklahoma.

How far is Buffalo Gap from Tuscola and Trinity’s Yukon office?

Buffalo Gap is in Taylor County, at an elevation of 1,918 feet, and covers 2.43 square miles. The town’s ZIP code is 79508. Tuscola lies 5.4 miles southeast, Potosi is 9.5 miles northeast, and Lawn is 11.3 miles southeast. Abilene, the county seat and nearest larger city, is 13.1 miles northeast. From our Yukon, Oklahoma main office, the road distance is 308 miles and the drive is 6.1 hours. That distance is part of mobilization planning for a job near FM 89.

Places near Buffalo Gap

Which jobs call for a bore in Buffalo Gap near Summit Avenue?

  • Highway crossing: A route beneath FM 89 can keep existing pavement intact, with the utility owner handling the TxDOT right of way permit.
  • Water service: A new connection near the City of Buffalo Gap system needs a route checked against existing water lines and marked utilities.
  • Fiber conduit: A conduit bore along Summit Avenue can pass beneath the street without cutting the pavement, subject to the route and utility locates.
  • Creek crossing: A proposed Elm Creek crossing needs depth planning around the channel and a check for U.S. Army Corps of Engineers jurisdiction.
  • Rail crossing: A route beneath BNSF Railway track needs the railroad owner’s agreement and crossing conditions addressed in the bore plan.
  • Street replacement: A replacement line near Pecan Street can use hydrovac potholes to locate marked utilities before the drill approaches.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What do you need to quote a Buffalo Gap bore near Litel Street?

A map pin matters near Litel Street because the exact route determines whether the bore approaches a street, Elm Creek or another marked line. Send us the address or pin in Buffalo Gap, what will go underground, the pipe or conduit size and the footage. A sketch or plans help us see the entry and exit points and any crossing near the proposed route.

The price follows the job details. Ground conditions matter: Buffalo Gap’s mapped clay loam and shallow bedrock can change reaming and bit needs. Crossings matter too, including FM 89, BNSF Railway track and Elm Creek. We also account for pipe or conduit size, footage, utilities to expose, pavement or concrete, pits, excavator time and sand backfill. Mobilization reflects the 308 road miles from Yukon, and high profile or emergency work can add planning needs.

Questions people ask about boring in Buffalo Gap

Does Trinity Boring Solutions take jobs in Buffalo Gap and Taylor County, and who staffs them?

Yes, Trinity Boring Solutions takes directional boring work in Buffalo Gap and across Texas. Our own crews and crews from satellite yards run by partner drilling contractors Trinity has personally vetted can staff the work. The customer works with Trinity from the first call through the bore log, including on a route near FM 89.

How old are buried lines near Buffalo Gap’s Pecan Street homes?

The American Community Survey 2019 to 2023 estimates that Buffalo Gap’s median housing year is 1972, with 39 percent of homes built before 1960. Older streets such as Pecan Street may have existing utilities to locate before a replacement bore. We expose marked lines by hydrovac potholing before drilling near them.

Can groundwater or flood prone ground affect bore pits near Buffalo Gap’s Elm Creek?

Flood prone soils are mapped across 50 percent of Buffalo Gap, including ground around Elm Creek, so pit placement and bore depth need attention. Seasonal water tables are not mapped within 60 inches. We plan creek crossings to stay beneath the channel and check for U.S. Army Corps of Engineers jurisdiction.

What ground should I expect in Buffalo Gap’s Clairemont soil?

The USDA soil survey maps Clairemont silty clay loam across 19 percent of Buffalo Gap. At about 40 inches, sandy clay loam is mapped under 37 percent of the area. Clay can stick to the reamer, while sand can loosen behind it, so the route and drilling fluid plan matter.

How much bedrock is mapped within five feet of the surface in Buffalo Gap?

Bedrock is mapped within 60 inches across 15 percent of Buffalo Gap. The mapped area includes 4 percent hard bedrock and 11 percent weathered bedrock, with a typical depth of 19 inches. That does not describe every point along a route, so we check conditions as the bore advances near Elm Creek.

Who approves a Buffalo Gap bore under FM 89?

TxDOT reviews work in the FM 89 right of way through the TxDOT Abilene District. The utility owner submits the application in RULIS, and we provide the bore plan and profile for it. TxDOT requires boring or tunneling beneath existing highway pavement, so an open cut is not the default crossing method.

How much notice does Texas811 need for a Buffalo Gap bore near West Street?

For a bore near West Street, Texas811 needs a locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days ahead. If the start slips more than 14 days past the original notice in Buffalo Gap, we need a new request. In Buffalo Gap, we refresh worn or moved marks before work continues.

How far is Buffalo Gap from Abilene and Trinity’s Yukon office, and does that affect a job?

Abilene is 13.1 miles northeast of Buffalo Gap, while our Yukon, Oklahoma main office is 308 road miles away, a 6.1 hour drive. The Yukon distance affects mobilization planning for work near FM 1235. We can review the proposed route and access before setting the scope.

What affects the cost of directional boring in Buffalo Gap near FM 89?

The route and scope determine the price, including footage, pipe size, mapped clay or bedrock, utilities to expose, pavement, pits and excavator time. A crossing beneath FM 89 or BNSF Railway brings different planning needs than a street route. Mobilization from Yukon also matters for Buffalo Gap, which is 308 road miles from our office.

Where the Buffalo Gap facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Buffalo Gap

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Buffalo Gap, Texas

Type the address of your job in Buffalo Gap. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Buffalo Gap

Same county: Merkel · Trent · Impact. All counties: Texas county list.