Burkburnett Texas Directional Boring: Tipton Loam, Gilbert Creek and Interstate 44
Quick Answer: Burkburnett is an incorporated city, so its city streets belong to the city; Trinity Boring Solutions does directional boring, also called horizontal directional drilling (HDD), for routes near the Wichita, Tillman and Jackson Railway. Our Yukon, Oklahoma main office is 131 road miles away, with Interstate 44 among the routes a bore may cross. Tipton soil is mapped across 35 percent of the city, and its loam can give way to clay loam at about 40 inches. That clay can cling to the reamer, so staged reaming and a controlled fluid plan matter on Burkburnett routes.
Burkburnett bores at a glance
- Incorporated city in Wichita County, Texas. Population 11,101 (Census Bureau 2024 estimate).
- Road distance from our Yukon, Oklahoma main office: 131 miles, about 2.5 hours of driving.
- Ground: Tipton soil is mapped on 35 percent of the area, with clay loam about 40 inches down.
- Rock: bedrock is mapped within 60 inches on 6 percent of the area.
- Highways inside the boundary: Interstate 44, US 281, US 277, Texas State Highway 240 and Loop 267. State permit office: TxDOT Wichita Falls District.
- Railroad track inside the boundary: Wichita, Tillman and Jackson Railway, with 11 mapped street and rail crossings.
- Named streams inside the boundary: Gilbert Creek and Wildhorse Creek.
- Public water: City of Burkburnett, surface water bought from another system.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Who bores in Burkburnett by the Wichita, Tillman and Jackson Railway?
Trinity Boring Solutions takes directional boring work in Burkburnett, an incorporated city in Wichita County where city streets belong to the city. With the Census Bureau Vintage 2024 estimate at 11,101, we plan underground work around Burkburnett’s stated population rather than assume demand. Along streets such as Daniels Road or routes near the railway, we install water, sewer, gas, electric conduit and fiber lines by bore to avoid opening the surface.
Our main office is in Yukon, Oklahoma, and Burkburnett work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our longest bore ran roughly 4,100 feet under the Arkansas River in Tulsa, Oklahoma. A typical Burkburnett job is much shorter, such as a service or conduit route near Sheppard Road. We are a family business started in 1965, with directional boring work dating to 1982.

What does the Tipton soil map show beneath Burkburnett?
The USDA soil survey maps Tipton as Burkburnett’s most common soil series, covering 35 percent of the city, with Tipton loam on 31 percent. At about 40 inches below the surface, clay loam is mapped across 42 percent of the area and clay across 16 percent; very fine sandy loam accounts for 14 percent. These mapped textures describe likely ground patterns, not what a test boring will find at a particular address. Clay can hold an open hole but stick to tooling and grip pipe, so the bore plan should allow for staged reaming.
| USDA soil survey, inside the Burkburnett city limits | What is mapped |
|---|---|
| Soil series mapped | Tipton 35 percent, Enterprise 14 percent, Deandale 11 percent, Hardeman 8 percent and Port 8 percent |
| Texture at the surface | loam 49 percent, silt loam 22 percent and very fine sandy loam 14 percent |
| Texture about 40 inches down | clay loam 42 percent, clay 16 percent and very fine sandy loam 14 percent |
| Engineering class about 40 inches down | lean clay (CL) 69 percent, silt (ML) 14 percent and clayey sand (SC) 8 percent |
| Average clay content about 40 inches down | 27 percent |
| Bedrock mapped within 60 inches | 6 percent of the area (0 percent hard rock, 6 percent weathered rock) |
| Seasonal water table within 60 inches | 0 percent of the area |
| Flood prone soils | 11 percent of the area |
| High corrosion risk for uncoated steel | 51 percent of the area |
The USDA soil survey maps bedrock within 60 inches in 6 percent of Burkburnett, with a typical depth of 26 inches where mapped. Dune Sand of Quaternary age and Early Permian sedimentary rock are also mapped, so local changes in material can affect steering and drilling time. Seasonal water table soils are not mapped, while flood prone soils cover 11 percent. High steel corrosion risk is mapped on 51 percent of the area, so the line owner should consider casing and tracer wire materials.
How do we bore through Burkburnett clay loam?
In Burkburnett, the mapped clay loam calls for a controlled fluid plan and staged reaming rather than one aggressive pass. Tipton loam and deeper clay textures can behave differently along the same route.
- Tipton loam covers 31 percent of Burkburnett, so we ream in stages and keep the pull ready before opening more of the hole.
- Clay loam is mapped at about 40 inches across 42 percent of the city; a thinner fluid mix and polymer can limit sticking around the reamer.
- Where the survey maps Dune Sand, the loose material can cave behind the bit, so the bore plan can use staged reaming and wall building fluid.
- At Gilbert Creek, we plan depth to stay below the channel and check for U.S. Army Corps of Engineers jurisdiction during route planning.

What could a bore cross in Burkburnett near Gilbert Creek?
Burkburnett’s mapped road network includes Interstate 44, US 281, US 277 and Texas State Highway 240, so a route can involve state or federal highway right of way. Sheppard Road is the longest named street at 3.04 miles inside the city, followed by 3rd Street at 3.01 miles and Daniels Road at 2.7 miles. Preston Road adds another 2.36 miles of named street. A bore route needs to account for the specific road crossing and its surface limits.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| Interstate 44 | Interstate | 10.2 roadway miles inside | State highway office |
| US 281 | US highway | 10.2 roadway miles inside | State highway office |
| US 277 | US highway | 10.2 roadway miles inside | State highway office |
| Texas State Highway 240 | State highway | 5.9 roadway miles inside | State highway office |
| Loop 267 | State highway | 3.3 roadway miles inside | State highway office |
| FM 369 | State highway | 2 roadway miles inside | State highway office |
| FM 3429 | State highway | 1.1 roadway miles inside | State highway office |
| Spur 383 | State highway | 0.2 roadway miles inside | State highway office |
| Wichita, Tillman and Jackson Railway | Railroad | 4.86 track miles inside | The railroad |
| Gilbert Creek | Stream | 4.5 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Wildhorse Creek | Stream | 0.08 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Branch of Wild Horse Creek | Stream nearby | 0.4 miles outside | Checked for Corps of Engineers jurisdiction |
The Wichita, Tillman and Jackson Railway has 4.86 track miles inside Burkburnett, and 11 street and rail crossings are mapped in the city. A crossing beneath that track needs an agreement with the railroad owner. Gilbert Creek runs 4.5 channel miles inside the limits; Wildhorse Creek adds 0.08 miles. Five street crossings of named streams are mapped, so creek routes need careful depth planning and a check for U.S. Army Corps of Engineers jurisdiction.
Who approves Burkburnett bores beneath Interstate 44?
Interstate 44 is a TxDOT route in Burkburnett, and work in its right of way needs a utility permit reviewed by the TxDOT Wichita Falls District. The utility that owns the line submits the application through TxDOT’s online RULIS system; we prepare the bore plan and profile and work under the owner’s permit. Under existing highway pavement, the installation is by boring or tunneling. A crossing beneath the Wichita, Tillman and Jackson Railway also needs an agreement with the track owner. For Gilbert Creek, planning includes checking whether the crossing is within U.S. Army Corps of Engineers jurisdiction.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Whose utility lines serve Burkburnett in Wichita County?
The City of Burkburnett owns the public water system, which uses purchased surface water and reports 4,697 service connections serving 11,057 people. For electric service in Wichita County, AEP Texas North and Oncor Electric Delivery Company report service to the county. Those reports do not identify the provider at every address, so we confirm the line owner before planning a conduit bore near a Burkburnett water main or electric route.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| City of Burkburnett | Public water system | Surface water bought from another system | 4,697 connections, 11,057 people served |
| AEP Texas North and Oncor Electric Delivery Company | Electric utilities reporting service in Wichita County | EIA Form 861 | Confirm the line owner by address |
American Community Survey 2019 to 2023 five year estimates put Burkburnett’s median housing year at 1974; 26 percent of homes were built before 1960, 53 percent from 1960 to 1999 and 21 percent in 2000 or later. That mix can mean a route on Preston Road serves either replacement work or a newer connection. We hydrovac expose every marked utility on the bore path before drilling near it; paint shows position, not depth. For a crossing under Sheppard Road, that means exposing marked lines before the drill approaches them.

How far is Burkburnett from Pleasant Valley and our Yukon yard?
Burkburnett is in Wichita County, at an elevation of 1,038 feet, and covers 11.36 square miles. ZIP code 76354 covers the city. Cashion Community is 4.3 miles southeast, Pleasant Valley is 9.6 miles south, and Iowa Park is 10.1 miles southwest. Wichita Falls, the county seat and nearest larger city, is 11.9 miles south. Our Yukon, Oklahoma main office is 131 road miles away, a drive of 2.5 hours, so distance can affect mobilization for a Daniels Road bore.
Places near Burkburnett
- Directional boring in Cashion Community: 4.3 miles southeast
- Directional boring in Pleasant Valley: 9.6 miles south
- Directional boring in Iowa Park: 10.1 miles southwest
- Directional boring in Wichita Falls: 11.9 miles south
- Directional boring in Dean: 14.5 miles southeast
What boring work comes up on Burkburnett’s Daniels Road?
- Highway crossing: A bore beneath Interstate 44 can pass below existing pavement, with the route and right of way addressed in the TxDOT permit.
- Water service: A new or replacement connection near the City of Burkburnett water system can be routed beneath a street without cutting its surface.
- Fiber conduit: A conduit route along Daniels Road can be bored past pavement and marked utilities after those lines are exposed.
- Creek crossing: A Gilbert Creek route needs depth planning below the channel and a jurisdiction check during planning.
- Rail crossing: A route beneath the Wichita, Tillman and Jackson Railway needs an agreement with the railroad that owns the track.
- Street crossing: A bore beneath Sheppard Road can leave pavement uncut, with pits placed in dirt on each side of the crossing.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What should I send for a Burkburnett bore near Sheppard Road?
For a Burkburnett quote, start with the address or map pin, such as a point on Sheppard Road. Tell us what will go underground, whether it is water, sewer, gas, electric conduit or fiber, then give the pipe or conduit size and footage. A sketch or plans help show where the route meets Interstate 44, Gilbert Creek or an existing line.
The route details set the price. Ground is one group: Tipton loam and clay loam can change reaming and fluid needs. Crossings are another: Gilbert Creek, the railway, pavement and marked utilities affect the plan and exposure work. Logistics include pit space, excavator time, sand backfill and mobilization from Yukon, 131 road miles away. Pipe size, footage, concrete, high profile work and emergency timing also change the scope for a Burkburnett job.
Questions people ask about boring in Burkburnett
Does Trinity take directional boring jobs in Burkburnett and Wichita County?
Yes. Trinity Boring Solutions takes directional boring work in Burkburnett and across Texas. The work is staffed by our own crews or from satellite yards run by partner drilling contractors we have vetted. You work with Trinity from the first call through the bore log, including on a route near the Wichita, Tillman and Jackson Railway.
Who approves a Burkburnett bore under Interstate 44?
For work in Interstate 44 right of way, the utility owner applies for the TxDOT utility permit through RULIS, and the TxDOT Wichita Falls District reviews it. We provide the bore plan and profile for the owner’s application and work under the permit issued to that utility. The owner, not the drilling contractor, files.
What does a Burkburnett bore under the Wichita, Tillman and Jackson Railway need?
A bore beneath the Wichita, Tillman and Jackson Railway needs an agreement from the railroad that owns the track. For Burkburnett water crossings, we follow the agreement’s casing, depth and flagging conditions before boring. With 4.86 track miles inside Burkburnett, the route and track owner need to be identified before the crossing plan is prepared.
Can a line be bored beneath Gilbert Creek in Burkburnett?
A line can be planned beneath Gilbert Creek, with depth set to pass below the channel. The creek has 4.5 channel miles inside Burkburnett, and its crossing is checked for U.S. Army Corps of Engineers jurisdiction during planning. The route also needs to account for creek bank access and suitable work areas.
Who owns Burkburnett’s public water system, and does it use purchased surface water?
For Burkburnett boring, we account for the public water system owned by the City of Burkburnett, which uses purchased surface water. We use Burkburnett’s 4,697 service connections and 11,057 people served as context when planning underground utility work. For a bore near a water line, the route and the specific line location still need to be confirmed before drilling.
Which electric companies report service in Wichita County near Burkburnett?
AEP Texas North and Oncor Electric Delivery Company report electric service in Wichita County. Those county reports do not establish which company owns a line at a particular Burkburnett address. We confirm the line owner before planning an electric conduit route, then check the owner’s conduit specifications.
What bore sizes and lengths can you handle on Burkburnett’s Preston Road?
For a route near Preston Road, we handle 3/4 inch service lines through 48 inch casing and bore lengths from 10 feet to 5,000 feet. The right equipment and method depend on the route, pipe or conduit size, and ground conditions mapped around Burkburnett.
How much notice does Texas811 need for a Burkburnett bore near Sheppard Road?
For a Sheppard Road bore, place the Texas811 locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before work. For Burkburnett schedules, we submit a new request if the start slips more than 14 days past the original notice. On Burkburnett boring work, we refresh marks through Texas811 if they wear off or move before continuing.
What affects the cost of a Burkburnett directional bore under Interstate 44?
The scope drives the price for an Interstate 44 bore. Length and pipe size matter, as do Tipton soil and clay loam, pavement, utility exposures, and any creek or rail crossing. Pit work, excavator time, backfill and mobilization from the Yukon office also affect the job plan. High profile or emergency timing can add work.
Where the Burkburnett facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Burkburnett
- U.S. Census Bureau, TIGER/Line 2024: Burkburnett boundary, roads, rail lines and streams
- U.S. Census Bureau, Vintage 2024 population estimates: Burkburnett
- U.S. Census Bureau, American Community Survey 2019 to 2023: Burkburnett housing units and year built
- Macrostrat geologic map compilation: map units under Burkburnett
- U.S. EPA Safe Drinking Water Information System: public water systems serving Burkburnett
- U.S. Department of Transportation, North American Rail Network: track owners in Wichita County
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Wichita County
- U.S. Geological Survey, Elevation Point Query Service: Burkburnett elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Burkburnett
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Burkburnett
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Burkburnett, Texas
Type the address of your job in Burkburnett. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Burkburnett
Same county: Electra. All counties: Texas county list.
