trinityboringsolutions.com

Cashion Community Texas Directional Boring: Tipton Loam, FM 1177 and Gilbert Creek

Quick Answer: Tipton loam is common in Cashion Community, and clay loam below the surface can grip a drill; we take directional boring, also called horizontal directional drilling (HDD), beneath FM 1177. The Yukon, Oklahoma main office is 135 road miles from Bailey Road, a distance to include in mobilization planning. Clay rich ground can build up on a reamer, so we plan the hole and pull timing for the soil. Gilbert Creek is just outside the city limits, making a creek route a distinct crossing to review.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Cashion Community bores at a glance

  • Incorporated city in Wichita County, Texas. Population 295 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 135 miles, about 2.7 hours of driving.
  • Ground: Tipton soil is mapped on 47 percent of the area, with clay loam about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 2 percent of the area.
  • Highways inside the boundary: FM 1177 and Texas State Highway 240. State permit office: TxDOT Wichita Falls District.
  • Railroad track inside the boundary: none mapped.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who handles directional boring in Cashion Community near Gilbert Creek?

We take directional boring work in Cashion Community, Wichita County, where the Census Bureau Vintage 2024 estimate puts the population at 295. Along Bailey Road or Cashion Road, our crews can install water, sewer, gas, electric conduit or fiber by bore. The route and line type guide the plan, including how we pass existing services without opening the road surface.

Our main office is in Yukon, Oklahoma, and Cashion Community work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our longest bore is roughly 4,100 feet with 48 inch pipe beneath the Arkansas River in Tulsa. We started as a family business in 1965 and have drilled directionally since 1982; a Cashion Road bore is planned for its own route and ground.

Trinity Boring Solutions Vermeer D24x40 directional drill set up for a bore
Our Vermeer D24x40 directional drill set up for a bore. Photos on this page are from our jobs in Oklahoma and Texas.

What is Cashion Community ground like to bore through Tipton soil?

Tipton soil is the leading mapped series in Cashion Community, covering 47% of the area in the USDA soil survey. The surface is mostly loam, while the survey maps clay loam at about 40 inches across 63% of the area and clay across 22%. Average clay content at that depth is 30%. For Cashion Community boring plans, we treat Tipton and Deandale as mapped soil patterns, not as test borings. For a bore, the clay rich layer can stick to the reamer and grip pipe, so the drilling plan needs to account for the actual ground along the route.

USDA soil survey, inside the Cashion Community city limitsWhat is mapped
Soil series mappedTipton 47 percent, Deandale 21 percent, Frankirk 16 percent, Madge 7 percent and Enterprise 3 percent
Texture at the surfaceloam 70 percent, silt loam 22 percent and very fine sandy loam 3 percent
Texture about 40 inches downclay loam 63 percent, clay 22 percent and sandy clay loam 7 percent
Engineering class about 40 inches downlean clay (CL) 92 percent and silt (ML) 3 percent
Average clay content about 40 inches down30 percent
Bedrock mapped within 60 inches2 percent of the area (0 percent hard rock, 2 percent weathered rock)
Seasonal water table within 60 inches0 percent of the area
Flood prone soils1 percent of the area
High corrosion risk for uncoated steel70 percent of the area

The USDA soil survey maps bedrock within 60 inches in 2% of Cashion Community, so shallow rock is not typical across the mapped area; a specific route still needs assessment. Seasonal water table is not mapped within 60 inches, and flood prone soils cover 1%. High steel corrosion risk is mapped across 70%, which matters for steel casing and tracer wire. The geologic map identifies the Cisuralian age Petrolia Formation, with mudstone and sandstone that can change drilling conditions along a route.

How do crews bore Cashion Community clay loam?

We plan Cashion Community bores for the mapped clay loam and Tipton soil, adjusting fluid and reaming to keep the hole controlled and the pipe moving.

  1. Tipton soil and clay loam can cling to the reamer, so we use a staged approach and plan to pull the line before the opened hole has time to grip it.
  2. Where silt loam appears along a Cashion Community route, we control fluid pressure so soft ground does not wash out or lose steering under pavement.
  3. Before drilling near a marked utility on Bailey Road, we hydrovac pothole it to confirm its depth; surface paint alone does not show how deep it lies.
  4. As a bore advances near FM 1177, we track the drill head from the surface and log depth and pitch to keep the route on plan.
Bore pit with a 6 inch PVC sleeve, traffic cones and blue water line flags at NE 24th Street in Oklahoma City
A bore pit with a 6 inch PVC sleeve, traffic cones and blue water line flags at NE 24th Street in Oklahoma City.

Where might a Cashion Community bore pass under FM 1177?

FM 1177 and Texas State Highway 240 run inside Cashion Community, so a route beneath either highway needs a planned bore rather than an assumed open cut. Bailey Road, Cashion Road and Sandy Road are among the longest named streets in the city. A bore route can pass beneath a street without cutting its surface, with entry and exit pits placed off the pavement where access allows. The route and line depth determine the plan for each crossing.

CrossingTypeMapped extentWho has a say
FM 1177State highway1 roadway miles insideState highway office
Texas State Highway 240State highway0.3 roadway miles insideState highway office
Gilbert CreekStream nearby0.1 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

No railroad is mapped inside Cashion Community or within 1 mile outside its limits, so the mapped streets do not present a rail crossing. Gilbert Creek lies 0.1 miles beyond the city limits; no named stream crosses inside the city, and no street crossing of a named stream is mapped there. Near Gilbert Creek, we find no mapped lakes or ponds within 1 mile to include as surface water crossings. A route toward Gilbert Creek still calls for a channel crossing review.

Who approves a Cashion Community bore in Wichita County?

Cashion Community is incorporated, so its city streets belong to the city; FM 1177 and Texas State Highway 240 are state highways. Work in their right of way needs a TxDOT utility permit, reviewed by the TxDOT Wichita Falls District. The utility owner files through TxDOT’s RULIS system, while we prepare the bore plan and profile for that application. TxDOT rules require highway pavement crossings to be bored or tunneled, and the permit can set depth requirements. A route near Gilbert Creek is also checked for U.S. Army Corps of Engineers jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Who owns utility lines in Cashion Community and Wichita County?

The water provider for a specific Cashion Community address has to be confirmed with the city, Wichita County or the local water district before a bore is planned. AEP Texas North and Oncor Electric Delivery Company report electric service in Wichita County, but that does not establish which company owns a line at a particular address. We confirm the electric line owner before planning a conduit bore along Bailey Road or elsewhere.

Line ownerWhat it isSourceSize
AEP Texas North and Oncor Electric Delivery CompanyElectric utilities reporting service in Wichita CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Cashion Community’s median housing year at 1980; 7% of housing was built before 1960, 83% from 1960 to 1999 and 10% in 2000 or later. That mix can mean a replacement route as well as new service along Cashion Road. Before drilling near a marked utility, we hydrovac pothole it; paint shows position, not depth.

Reel of yellow polyethylene gas pipe on a trailer staged for a directional bore
A reel of yellow polyethylene gas pipe on a trailer, staged for a directional bore.

What places are near Cashion Community and Pleasant Valley?

Cashion Community is in Wichita County, at an elevation of 1,029 feet, and covers 1.9 square miles. Its ZIP code is 76305. Burkburnett is 4.3 miles northwest, Pleasant Valley is 8.6 miles southwest, and Wichita Falls, the county seat, is 9.0 miles south. Those nearby places help locate a job beyond Bailey Road and FM 1177. From the Yukon, Oklahoma main office, the drive is 135 road miles and 2.7 hours, which affects how we plan crew mobilization.

Places near Cashion Community

Which jobs call for a bore along Cashion Road in Cashion Community?

  • Highway crossing: A line beneath FM 1177 or Texas State Highway 240 needs a planned bore through the state highway right of way.
  • Water service: A service route near Bailey Road needs the address provider confirmed before we plan the connection and crossing.
  • Fiber route: A conduit bore along Cashion Road can keep the new line beneath the street surface and away from exposed utilities.
  • Creek crossing: A route toward Gilbert Creek needs channel planning and a check for U.S. Army Corps of Engineers jurisdiction.
  • Utility exposure: For a line beneath Sandy Road, we hydrovac pothole each marked utility on the bore path before drilling near it.
  • Acreage service: A longer service outside the city near Burkburnett can call for added footage and mobilization planning from Yukon.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

How do I get a Cashion Community bore quote near Bailey Road?

For a Cashion Community quote, send the address or map pin, what will go in the ground, the pipe or conduit size and footage; a sketch or plans help. A route on Bailey Road or near FM 1177 helps us see which pavement, utility and access details may shape the plan. Those details let us review the job scope rather than assume a standard route.

The 135 road miles from Yukon and 2.7 hour drive make mobilization part of a Cashion Community job plan. Tipton soil and clay loam can affect drilling and reaming; crossings of FM 1177 may add permit and depth planning. We also consider bore length, line size, utilities to expose, pavement, creek or drainage crossings, pits, excavator time and sand backfill. We may change the scope for high profile or emergency work at FM 1177 crossings as conditions require.

Questions people ask about boring in Cashion Community

Does Trinity Boring Solutions take jobs in Cashion Community, Wichita County, and how are crews assigned?

Yes, we take directional boring work in Cashion Community and across Texas. Our own crews and crews from satellite yards run by partner drilling contractors we have vetted can staff the work. Trinity stays responsible from the first call through the bore log, whether the job is near Bailey Road or FM 1177.

Who owns electric lines in Cashion Community, Wichita County, and who confirms conduit requirements?

AEP Texas North and Oncor Electric Delivery Company report electric service in Wichita County, but the owner of a line at a specific Cashion Community address must be confirmed. We verify the line owner before planning an electric conduit bore, including one along Cashion Road. The owner can confirm the required conduit specifications.

Does the city or county control Sandy Road in Cashion Community, and must it be cut?

Cashion Community is incorporated, so Sandy Road is a city street. A bore can pass beneath it without cutting the pavement; the route needs suitable entry and exit locations and a check for existing utilities. We expose marked lines on the bore path before drilling near them.

How do older homes and buried lines affect a replacement bore on Cashion Road in Cashion Community?

The American Community Survey 2019 to 2023 estimates put the median housing year at 1980, with 7% built before 1960 and 83% from 1960 to 1999. That age mix makes replacement work a consideration for a Cashion Road route. We locate and expose marked utilities before the drill approaches them.

Does Tipton soil in Cashion Community create a steel corrosion concern, and what pipe is used?

The USDA soil survey maps high steel corrosion risk across 70% of Cashion Community, including areas mapped as Tipton soil. The line owner should consider that exposure when selecting steel casing or tracer wire coatings. HDPE does not share the mapped steel corrosion concern, and the line owner selects materials for the installation.

What ground does a bore pass through in Cashion Community Tipton soil?

Tipton is the largest mapped soil series in Cashion Community at 47%. At about 40 inches, the USDA soil survey maps clay loam across 63% of the area and clay across 22%. Those patterns are not test borings, but they signal that clay can cling to the reamer and grip pipe.

Does Trinity cover Burkburnett and rural sites outside Cashion Community?

Yes, we take work in Texas, including places beyond Cashion Community. Burkburnett is 4.3 miles northwest, and rural routes outside the city limits can be reviewed with the same job details as a route near FM 1177. Distance from the Yukon office is part of mobilization planning.

How much notice does Texas811 need for a Cashion Community bore near Bailey Road, and what if marks change?

For a bore near Bailey Road, Texas law requires a locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before work. If our start moves more than 14 days past the original notice, we submit a new request to the TxDOT Wichita Falls District. Refresh marks that wear off or move through Texas811 before work continues.

What affects the cost of directional boring in Cashion Community under FM 1177?

The job scope determines the price, not the highway name alone. For FM 1177, the route, line size and length matter, along with TxDOT permit planning, pavement and utilities to expose. Tipton soil, any drainage crossing, pits and equipment time also affect the work, as can mobilization from the Yukon office.

Where the Cashion Community facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Cashion Community

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Cashion Community, Texas

Type the address of your job in Cashion Community. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Cashion Community

Same county: Electra. All counties: Texas county list.