trinityboringsolutions.com

Iowa Park Texas Directional Boring: Tillman Clay, BNSF Railway And Stevens Creek

Quick Answer: Iowa Park is an incorporated city in Wichita County, where the city owns streets; we take directional boring, also called horizontal directional drilling (HDD), for routes beneath Park Avenue. From our Yukon, Oklahoma main office, Iowa Park is 150 road miles away, and BNSF Railway adds a crossing to consider. Tillman soil and mapped clay at about 40 inches can make cuttings sticky and grip pipe, so we plan staged reaming and a same day pull. Stevens Creek and US 287 also shape route, access and crossing review.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Iowa Park bores at a glance

  • Incorporated city in Wichita County, Texas. Population 6,583 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 150 miles, about 2.9 hours of driving.
  • Ground: Tillman soil is mapped on 23 percent of the area, with clay about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 19 percent of the area.
  • Highways inside the boundary: US 287, US 287 Business, FM 368 and FM 1814. State permit office: TxDOT Wichita Falls District.
  • Railroad track inside the boundary: BNSF Railway, with 7 mapped street and rail crossings.
  • Named streams inside the boundary: Stevens Creek.
  • Public water: City of Iowa Park, surface water bought from another system.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Which contractor handles directional boring near Park Avenue in Iowa Park?

Iowa Park is an incorporated city in Wichita County, and Trinity Boring Solutions takes directional boring work beneath city streets such as Park Avenue, which the city owns. The Census Bureau Vintage 2024 estimate puts the population at 6,583. A bore along Park Avenue or another local route can carry water, sewer, gas, electric conduit or fiber, with the line and crossings setting the installation plan.

Our main office is in Yukon, Oklahoma, and Iowa Park work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Directional boring has been our work since 1982, after our family business began in 1965. Four decades of boring matter on Iowa Park routes where mapped clay can hold a hole and cling to a reamer, so we adapt the drilling plan to the ground.

Ditch Witch directional drill rig with a loaded drill rod rack staged at a commercial jobsite
Our Ditch Witch directional drill with a full rack of drill rod staged at a commercial site. Photos on this page are from our jobs in Oklahoma and Texas.

What kind of ground does Tillman soil mean for Iowa Park bores?

The USDA soil survey maps Tillman soil across 23 percent of Iowa Park, with Winters soil mapped across another 21 percent. Surface textures are mainly loam and clay loam, each mapped across 32 percent of the area. At about 40 inches below the surface, the survey maps clay across 46 percent and sandy clay across 21 percent; average clay content at that depth is 41 percent. These are mapped soil patterns, not test borings, so the route still needs evaluation.

USDA soil survey, inside the Iowa Park city limitsWhat is mapped
Soil series mappedTillman 23 percent, Winters 21 percent, Vernon 9 percent, Bluegrove 9 percent and Deandale 8 percent
Texture at the surfaceloam 32 percent, clay loam 32 percent and silt loam 20 percent
Texture about 40 inches downclay 46 percent, sandy clay 21 percent and bedrock 10 percent
Engineering class about 40 inches downlean clay (CL) 44 percent and fat clay (CH) 32 percent
Average clay content about 40 inches down41 percent
Bedrock mapped within 60 inches19 percent of the area (0 percent hard rock, 19 percent weathered rock)
Seasonal water table within 60 inches0 percent of the area
Flood prone soils6 percent of the area
High corrosion risk for uncoated steel76 percent of the area

The survey maps bedrock within 60 inches across 19 percent of Iowa Park, with a typical mapped depth of 31 inches. Seasonal water tables are not mapped within 60 inches, while flood prone soils cover 6 percent of the area, a consideration near Stevens Creek. High steel corrosion risk is mapped across 76 percent, so the line owner should consider casing and tracer wire materials; HDPE has no steel corrosion issue. The Quaternary Red Silty Clay Disintegration Residuum includes clay and shale, while the Cisuralian Petrolia Formation includes mudstone and sandstone, so a route may change from soil to rock.

How do we drill Iowa Park clay along local routes?

Iowa Park’s mapped clay calls for controlled fluid and staged reaming. We adjust the bore plan to the Tillman soil pattern and the specific route, whether it approaches Park Avenue or Stevens Creek.

  1. Tillman clay: We use thinner drilling fluid with polymer and ream in stages, since sticky cuttings can ball on the reamer and clay can grip pipe.
  2. Heavy clay: With 67 percent of Iowa Park mapped as heavy clay at about 40 inches, we watch fluid returns to limit pressure that could lift pavement.
  3. Creek approaches: Flood prone soils cover 6 percent of the mapped area, so a Stevens Creek crossing needs a depth plan that stays below the channel.
  4. Utility exposure: Before drilling near a marked line on Park Avenue, we hydrovac pothole it; surface marks show position, not depth.
Walkover locator at the edge of the wetland on a directional bore at the Cimarron site in Logan County, Oklahoma
Walkover locator at the edge of a wetland on a directional bore in Logan County, Oklahoma.

What does a bore have to cross in Iowa Park near Stevens Creek?

US 287, US 287 Business, FM 368 and FM 1814 run within Iowa Park, so a route crossing one of them may need state right of way planning. The longest named streets include Park Avenue at 2.52 miles, Bell Road at 2.02 miles and Jackson Avenue at 1.62 miles. Directional boring can place a line beneath pavement without cutting the street surface. A proposed route still needs utility exposure and a plan for pits on each side of the crossing.

CrossingTypeMapped extentWho has a say
US 287US highway5.6 roadway miles insideState highway office
US 287 BusinessUS highway2.5 roadway miles insideState highway office
FM 368State highway2.5 roadway miles insideState highway office
FM 1814State highway0.6 roadway miles insideState highway office
BNSF RailwayRailroad2.68 track miles insideThe railroad
Stevens CreekStream0.53 channel miles insideChecked for Corps of Engineers jurisdiction
North Side CanalStream nearby0.1 miles outsideChecked for Corps of Engineers jurisdiction
West Fork Pond CreekStream nearby0.3 miles outsideChecked for Corps of Engineers jurisdiction
Buffalo CreekStream nearby0.5 miles outsideChecked for Corps of Engineers jurisdiction
Lake Iowa ParkLake or pond203 acres, insideChecked for Corps of Engineers jurisdiction
Gordon LakeLake or pond46 acres, insideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

BNSF Railway has 2.68 track miles inside Iowa Park, and public mapping shows 7 street and rail crossings. Stevens Creek runs 0.53 channel miles through the city, with 1 mapped street crossing of a named stream. Lake Iowa Park and Gordon Lake are also inside the limits. A creek or lake route needs review for possible federal jurisdiction, and the bank or shoreline access affects where entry and exit pits can go.

Do I need a permit for Iowa Park bores near BNSF Railway?

A bore in Iowa Park city streets falls under the city, while US 287, US 287 Business, FM 368 and FM 1814 are state routes where work in the right of way needs a TxDOT utility permit. The TxDOT Wichita Falls District reviews the application, which the utility owner files through RULIS; we prepare the bore plan and profile for that filing. Existing highway pavement is bored or tunneled beneath, and the permit sets applicable cover requirements. A BNSF Railway crossing needs an agreement with the track owner. Stevens Creek and lake crossings are checked for U.S. Army Corps of Engineers jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

What is already in the ground in Wichita County near Iowa Park?

The City of Iowa Park public water system uses purchased surface water and reports 3,181 service connections serving 6,612 people. AEP Texas North and Oncor Electric Delivery Company report electric service in Wichita County, but that does not identify the provider at every Iowa Park address. Before an electric conduit bore, we confirm the line owner for the route and the conduit specifications with that owner.

Line ownerWhat it isSourceSize
City of Iowa ParkPublic water systemSurface water bought from another system3,181 connections, 6,612 people served
AEP Texas North and Oncor Electric Delivery CompanyElectric utilities reporting service in Wichita CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Iowa Park’s median housing year at 1975; 25 percent of homes were built before 1960, 55 percent from 1960 to 1999 and 20 percent in 2000 or later. Those figures describe housing, not the installation date of a buried line, so a replacement bore still needs route checks. We hydrovac pothole each marked utility on the bore path before drilling near it. For a proposed crossing under Jackson Avenue, that means exposing marked lines first because paint shows position, not depth.

Hydrovac truck and boring equipment staged beside an airport taxiway for utility daylighting in Oklahoma City
Our hydrovac truck and boring equipment beside an airport taxiway in Oklahoma City, set up to expose a utility crossing.

Where is Iowa Park in relation to Wichita Falls and our Yukon office?

Iowa Park is in Wichita County, 9.7 miles northwest of Wichita Falls, the county seat and nearest larger city. The city covers 4.27 square miles at an elevation of 1,063 feet, and its ZIP code is 76367. Pleasant Valley is 5.1 miles east; Burkburnett is 10.1 miles northeast; Holliday is 10.3 miles south; and Cashion Community is 11.1 miles northeast. Our Yukon, Oklahoma main office is 150 road miles away, a 2.9 hour drive, which can affect mobilization for work near US 287.

Places near Iowa Park

What kinds of bores come up around Iowa Park and Bell Road?

  • Highway crossing: A bore beneath US 287 keeps the pavement uncut, with right of way planning and entry pits outside the travel lanes.
  • Water service: A connection near Park Avenue can use a bore to avoid opening the street surface along the route.
  • Fiber conduit: A route near Bell Road can place conduit below pavement while leaving the road surface intact.
  • Creek crossing: A Stevens Creek bore needs a route and depth plan that accounts for the channel and creek bank.
  • Rail crossing: A line beneath BNSF Railway needs the track owner’s agreement before the crossing is planned.
  • Water system work: A bore connecting to the City of Iowa Park water system needs the route and existing lines checked before drilling.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

How do I get a quote for Iowa Park work near US 287?

For a quote near US 287 or Park Avenue, send the job address or map pin, what will go underground, the pipe or conduit size and the footage; a sketch or plans help. The route matters in Iowa Park because the mapped clay, nearby utilities and crossings can change the drilling setup. Include a proposed route around any street, track or creek crossing so we can review the full scope.

The job scope sets the price, with ground and crossing work leading the review: Iowa Park’s clay can require staged reaming, while BNSF Railway or Stevens Creek brings added crossing planning. We also consider bore length, pipe or conduit size, marked utilities to expose, pavement, pits, excavator time and sand backfill. A route under US 287 has state right of way requirements, and the 150 road miles from Yukon affect mobilization. High profile or emergency work can also change the job plan.

Questions people ask about boring in Iowa Park

Does Trinity take directional boring work in Iowa Park and Wichita County, and who staffs it?

Yes, Trinity takes directional boring work in Iowa Park and Wichita County. Our Yukon office handles the customer relationship from the first call through the bore log, while our own crews and vetted partner contractor yards support field staffing. A route near Park Avenue is planned around its ground conditions and crossings.

Who owns electric lines in Iowa Park, Wichita County, and who confirms conduit specs?

AEP Texas North and Oncor Electric Delivery Company report electric service in Wichita County, but the provider at a particular Iowa Park address must be confirmed. The line owner can confirm the conduit requirements for that route before we plan a bore near US 287 or another local crossing.

Does Iowa Park control Jackson Avenue, and can a bore avoid cutting the street?

Iowa Park is incorporated, so Jackson Avenue is a city street. Directional boring can install a line beneath the roadway without an open cut through the pavement. The route still needs utility marks and potholing before drilling near existing lines.

How old are homes and buried lines near Bell Road in Iowa Park?

The American Community Survey 2019 to 2023 estimates give Iowa Park a median housing year of 1975, but do not date buried utilities near Bell Road. A replacement bore may follow an older service route or avoid lines that remain in use, so the marked utilities need exposure before drilling.

Does Tillman soil in Iowa Park corrode steel, and what pipe is used?

The USDA soil survey maps high steel corrosion risk across 76 percent of Iowa Park. The line owner selects coatings for steel casing or tracer wire; HDPE does not have the same steel corrosion concern. The right choice depends on the line and the route through Tillman soil.

What ground is under Iowa Park in Tillman soil at about 40 inches?

At about 40 inches below the surface, the USDA soil survey maps clay across 46 percent of Iowa Park and sandy clay across 21 percent. Tillman soil covers 23 percent of the city. These are mapped patterns rather than test results at a specific bore, so the route may need adjustments as drilling conditions are observed.

How early do I need Texas811 marks for a bore by Park Avenue in Iowa Park?

For Park Avenue work, request Texas811 locates at least 48 hours, or two working days, before excavation, excluding Saturdays, Sundays and legal holidays. The request cannot be made more than 14 days before the start. If the start slips more than 14 days past the notice, make a new request; have worn or moved marks refreshed before work continues.

How far is Iowa Park from Yukon, and does Wichita Falls affect mobilization?

Iowa Park is 150 road miles and a 2.9 hour drive from our Yukon, Oklahoma main office. Wichita Falls is 9.7 miles southeast of Iowa Park, but the Yukon distance is the relevant mobilization factor for a local job. The route and equipment needed also affect the work plan.

What affects the cost of directional boring near US 287 in Iowa Park?

The price reflects the job scope, not just footage. Iowa Park’s clay, a US 287 right of way crossing, BNSF Railway or Stevens Creek can add planning or drilling work. Bore length, pipe size, utilities to expose, pavement, pits, excavator time, backfill and mobilization from Yukon also affect the quote.

Where the Iowa Park facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Iowa Park

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Iowa Park, Texas

Type the address of your job in Iowa Park. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Iowa Park

Same county: Electra. All counties: Texas county list.