trinityboringsolutions.com

Canyon Texas Directional Boring: Olton Soil, Interstate 27 And BNSF Railway

Quick Answer: Canyon is 274 road miles from our Yukon main office, and our own crews and vetted partner crews handle directional boring, also called horizontal directional drilling (HDD), beneath routes such as Interstate 27. We install water, sewer, gas, electric conduit and fiber along Canyon streets like 4th Avenue. Olton soil and clay loam are common here, so sticky ground can cling to the reamer and grip pipe. Tierra Blanca Creek and BNSF Railway also call for careful route planning.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Canyon bores at a glance

  • County seat of Randall County, Texas. Population 16,457 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 274 miles, about 5.1 hours of driving.
  • Ground: Olton soil is mapped on 20 percent of the area, with clay loam about 40 inches down.
  • Rock: no bedrock is mapped in the top 60 inches.
  • Highways inside the boundary: Interstate 27, US 60, US 87, Texas State Highway 217 and FM 2590. State permit office: TxDOT Amarillo District.
  • Railroad track inside the boundary: BNSF Railway, with 6 mapped street and rail crossings.
  • Named streams inside the boundary: Tierra Blanca Creek, Palo Duro Creek and Spring Draw.
  • Public water: Canyon Municipal Water System, surface water bought from another system.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who handles directional boring near BNSF Railway in Canyon?

Trinity Boring Solutions takes directional boring work in Canyon, Randall County, including routes such as 4th Avenue. Canyon is 274 road miles from our Yukon, Oklahoma main office, and our own crews work alongside vetted partner crews. We use the Census Bureau Vintage 2024 population estimate of 16,457 as background when planning underground work in Canyon. Along streets and utility routes, we install water, sewer, gas, electric conduit and fiber.

Our main office is in Yukon, Oklahoma, and Canyon work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our family business began in 1965, and our directional boring experience since 1982 informs how we plan Canyon work. We have had no utility strike in over 25 years, a record we bring to planning around the Canyon Municipal Water System and the electric lines reported in Randall County.

Ditch Witch directional drill rig with a loaded drill rod rack staged at a commercial jobsite
Our Ditch Witch directional drill with a full rack of drill rod staged at a commercial site. Photos on this page are from our jobs in Oklahoma and Texas.

What does the soil survey show about Olton soil in Canyon?

The USDA soil survey maps Olton among Canyon’s leading soil series, covering 20% of the city, and maps an Olton urban land complex across 17%. Surface clay loam accounts for 65% of the mapped area. At about 40 inches below the surface, clay loam is mapped across 61%, and the average clay content is 29%. Heavy clay is mapped across 32% at that depth, compared with sandy ground across 22%. For Canyon locations, we treat mapped soil patterns as planning context, not as a substitute for test borings. Clay can hold the hole open, but it can also stick to the reamer and grip the pipe.

USDA soil survey, inside the Canyon city limitsWhat is mapped
Soil series mappedOlton 20 percent, Estacado 16 percent, Mobeetie 15 percent, Portales 7 percent and Plemons 7 percent
Texture at the surfaceclay loam 65 percent, fine sandy loam 15 percent and loam 11 percent
Texture about 40 inches downclay loam 61 percent, fine sandy loam 15 percent and sandy clay loam 9 percent
Engineering class about 40 inches downlean clay (CL) 71 percent, silty clayey sand (SC SM) 15 percent and clayey sand (SC) 7 percent
Average clay content about 40 inches down29 percent
Bedrock mapped within 60 inchesNone mapped
Seasonal water table within 60 inches0 percent of the area
Flood prone soils9 percent of the area
High corrosion risk for uncoated steel29 percent of the area
Mapped as urban land (disturbed fill)2 percent of the area

Bedrock is not mapped in the top five feet of Canyon, though deeper rock is still possible. The geologic map shows unnamed Pliocene deposits of gravel, sand and silt. A seasonal water table is not mapped, while flood prone soils cover 9% of the city, so Tierra Blanca Creek deserves attention when setting a crossing route. The survey maps high steel corrosion risk across 29% of Canyon. The line owner should weigh casing and tracer wire materials; HDPE does not share that steel corrosion concern.

How do we drill Canyon’s clay loam?

We use horizontal directional drilling (HDD) to install lines beneath Canyon streets and crossings with small entry and exit pits. The local clay loam calls for control of fluid and reaming so the hole stays workable without lifting pavement.

  1. Because clay loam is common around Canyon, we tune drilling fluid and ream in stages to limit sticky buildup on the tooling.
  2. With heavy clay mapped across 32% of the area at about 40 inches, we watch fluid returns so pressure does not lift pavement near 4th Avenue.
  3. The survey maps sandy ground across 22% at about 40 inches, so we plan staged reaming and have the pipe ready before the final pass.
  4. At Tierra Blanca Creek, we plan the bore depth around the channel and check whether the crossing has federal waterway jurisdiction.
Open bore pit in red Oklahoma dirt with white PVC conduit stub ups and an orange safety barrier
An open bore pit in red Oklahoma dirt with PVC conduit stubbed up and a safety barrier around it.

Where does a line have to go under Tierra Blanca Creek in Canyon?

A Canyon bore can run beneath Interstate 27, US 60, US 87, Texas State Highway 217, FM 2590 or FM 3331. The mapped roadway lengths inside city limits include 3.4 miles of Interstate 27, 10.5 miles of US 60 and 8.3 miles of US 87. Named streets also shape the route: 4th Avenue runs 4.29 miles in the city, 2nd Avenue 3.11 miles and Soncy Road 2.56 miles. Boring can keep a route below pavement rather than cutting across those streets.

CrossingTypeMapped extentWho has a say
Interstate 27Interstate3.4 roadway miles insideState highway office
US 60US highway10.5 roadway miles insideState highway office
US 87US highway8.3 roadway miles insideState highway office
Texas State Highway 217State highway4.2 roadway miles insideState highway office
FM 2590State highway2.4 roadway miles insideState highway office
FM 3331State highway0.3 roadway miles insideState highway office
BNSF RailwayRailroad3.86 track miles insideThe railroad
Tierra Blanca CreekStream2.63 channel miles insideChecked for Corps of Engineers jurisdiction
Palo Duro CreekStream2.43 channel miles insideChecked for Corps of Engineers jurisdiction
Spring DrawStream1.54 channel miles insideChecked for Corps of Engineers jurisdiction
Tierra Blauca CreekStream nearby0.2 miles outsideChecked for Corps of Engineers jurisdiction
Hackberry CreekStream nearby0.3 miles outsideChecked for Corps of Engineers jurisdiction
Mc Spadden LakeStream nearby0.3 miles outsideChecked for Corps of Engineers jurisdiction
Dry CreekStream nearby0.7 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

BNSF Railway has 3.86 track miles in Canyon, and public mapping shows 6 street and rail crossings in the city. A track crossing needs an agreement from the railroad that sets its crossing conditions. Tierra Blanca Creek runs 2.63 channel miles inside city limits, and Palo Duro Creek runs 2.43 miles. Mapping also shows 12 street crossings of named streams. A creek route is checked for possible federal waterway jurisdiction during planning.

Who approves a Canyon bore in Randall County?

Canyon city streets are under city authority, while work in the right of way of Interstate 27, US 60, US 87 and the state or farm to market highways needs a TxDOT utility permit. The TxDOT Amarillo District reviews those applications through the online RULIS system, which the utility owner files. We prepare the bore plan and profile for that filing and work under the owner’s permit. TxDOT cover requirements can set the bore depth. For a BNSF Railway crossing, the railroad agreement sets conditions; a Tierra Blanca Creek crossing is checked for Corps jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

What is already in the ground near Canyon Municipal Water System?

Canyon Municipal Water System is locally owned and uses purchased surface water. It serves 15,771 people through 5,883 service connections, so a proposed route near the system needs utility locates and careful exposure before drilling. Southwestern Public Service and Greenbelt Electric Cooperative report electric service in Randall County. We confirm the line owner for the specific address before planning an electric conduit bore, rather than assume one provider covers every Canyon street.

Line ownerWhat it isSourceSize
Canyon Municipal Water SystemPublic water systemSurface water bought from another system5,883 connections, 15,771 people served
Southwestern Public Service and Greenbelt Electric CooperativeElectric utilities reporting service in Randall CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

We use the American Community Survey 2019 to 2023 five year estimate of Canyon’s median housing year, 1983, as background for underground planning. The survey estimates 18% of homes were built before 1960, 52% from 1960 to 1999 and 30% in 2000 or later. A route along 4th Avenue may serve a replacement line or a newer connection, and the age range makes checking for existing utilities important. We use hydrovac potholing to expose marked lines before the drill approaches; paint shows location, not depth.

Large HDPE conduit reels staged on a Rotate A Reel trailer for a fiber and utility installation in Oklahoma
HDPE conduit reels on a reel trailer for a fiber and utility installation in Oklahoma.

Do you cover Timbercreek Canyon and the Canyon area?

We serve Canyon in Randall County, where the city covers 8.08 square miles at an elevation of 3,508 feet. ZIP code 79015 covers the city. Rockwell Place is 3.3 miles north, Timbercreek Canyon is 7.2 miles northeast, and Umbarger is 11.0 miles west. Canyon is the county seat, and Amarillo is 15.2 miles north. From our Yukon, Oklahoma main office, the drive is 274 road miles and about 5.1 hours, which is part of planning crew mobilization for a Canyon job.

Places near Canyon

What would we bore near 2nd Avenue in Canyon?

  • Highway crossing: A bore under Interstate 27 keeps the utility route beneath the highway instead of cutting across its paved travel lanes.
  • Water service: A connection near the Canyon Municipal Water System needs a confirmed route and exposed marked utilities before drilling.
  • Fiber route: Fiber along 4th Avenue can pass beneath pavement and driveways with entry and exit pits set off the traveled surface.
  • Creek crossing: A route under Tierra Blanca Creek needs depth planning around the channel and a jurisdiction check during planning.
  • Rail crossing: A line beneath BNSF Railway needs the railroad’s crossing agreement, with the route planned around its requirements.
  • Street conduit: An electric conduit bore near Soncy Road starts with confirming the line owner serving that specific address.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What should I send for a Canyon quote near Soncy Road?

For Canyon quotes, we need the address or map pin, what is going in the ground, pipe or conduit size, footage; sketches or plans help. A route near Soncy Road can involve pavement, while a route toward Tierra Blanca Creek raises different crossing questions. Those details help us understand the work before we plan it.

A short route with clear access near 2nd Avenue can be simpler to plan than a bore with several crossings. The Olton clay loam, pipe or conduit size, footage and utilities to expose all affect the work. Pavement along Soncy Road, a BNSF Railway crossing or a route under Tierra Blanca Creek adds planning needs. Pits, excavator time, sand backfill and emergency timing also matter. Mobilization reflects Canyon’s 274 road miles from Yukon.

Questions people ask about boring in Canyon

Does Trinity take directional boring jobs in Randall County near Canyon?

Yes, we take directional boring work in Canyon and elsewhere in Randall County. Our own crews work with vetted partner drilling contractors based at satellite yards, while our main office is in Yukon, Oklahoma. For a route such as 4th Avenue, you work with Trinity from the first call through the bore log, whichever crew is on site.

Does Olton soil in Canyon create a steel corrosion concern, and what pipe is used?

The USDA soil survey maps high steel corrosion risk across 29% of Canyon, so the line owner should consider casing and tracer wire materials. Olton soil is among the mapped local series, but the survey is not a test of a particular route. HDPE is not affected by soil corrosion; the line owner selects any coating for steel.

What ground should I expect below Olton soil in Canyon?

The USDA soil survey maps Olton across 20% of Canyon, with clay loam covering 61% of the mapped area at about 40 inches. Average clay content at that depth is 29%, and sandy ground covers 22%. These are area wide mapped patterns, not a prediction for a specific address on Soncy Road.

Will a Canyon bore hit rock near Tierra Blanca Creek?

Bedrock is not mapped in the top five feet of Canyon, but that does not rule out rock deeper down. The geologic map shows unnamed Pliocene deposits described as gravel, sand and silt. A route near Tierra Blanca Creek still needs site specific planning because the mapped unit does not establish the conditions at a particular bore.

Who approves a Canyon bore under Interstate 27, and which TxDOT office reviews it?

For work in Interstate 27 right of way, the line owning utility applies for a TxDOT utility permit through RULIS. The TxDOT Amarillo District reviews it. We prepare the bore plan and profile for the utility owner’s filing and work under its permit. The permit sets the project requirements, including any depth adjustment.

What requirements apply to a Canyon bore under BNSF Railway?

A bore beneath BNSF Railway track in Canyon needs an agreement with the railroad that owns the track. The agreement establishes crossing conditions, including casing, depth and flagging requirements. BNSF Railway has 3.86 track miles inside the city, so the exact crossing location matters when preparing a route.

What bore sizes and lengths can you handle for a job near Soncy Road in Canyon?

For Canyon work, we handle lines from 3/4 inch service lines up to 48 inch casing, with bore lengths from 10 feet to 5,000 feet. A Soncy Road job still depends on access, pavement, soil and what the line must cross. A map pin or sketch helps us understand the route and size before quoting.

How early should I request 811 locates for a Canyon bore near 4th Avenue?

For a bore near 4th Avenue, make the Texas811 request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays; Texas811 describes that as two working days. Do not request it more than 14 days before work. If the start slips over 14 days past the original notice, make a new request. In Canyon, we refresh worn or moved marks through Texas811 before work continues.

What affects the price of a directional bore under Interstate 27 in Canyon?

The route and scope determine the price, including length, line size, soil, utilities to expose, pavement, crossing count, pits and equipment time. An Interstate 27 crossing can involve highway permit planning, while Olton clay loam or a Tierra Blanca Creek crossing affects drilling plans. Mobilization also matters because Canyon is 274 road miles from our Yukon main office.

Where the Canyon facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Canyon

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Canyon, Texas

Type the address of your job in Canyon. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Canyon

Same county: Happy · Bushland. All counties: Texas county list.