trinityboringsolutions.com

Carl’s Corner Texas Directional Boring: Eddy Soil, Interstate 35 and Pecan Creek

Quick Answer: Eddy soil is very gravelly clay loam, and it can hold a bore hole while sticking to the reamer. We do directional boring, also called horizontal directional drilling (HDD), for routes crossing Interstate 35 and other Carl’s Corner features. Carl’s Corner is 269 road miles from our Yukon, Oklahoma main office, and Cornelius Road is one local route to plan around. The USDA soil survey maps bedrock within 60 inches across 91 percent of the town, so the drill plan must account for weathered rock.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Carl’s Corner bores at a glance

  • Incorporated city in Hill County, Texas. Population 227 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 269 miles, about 5.2 hours of driving.
  • Ground: Eddy soil is mapped on 66 percent of the area, with bedrock about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 91 percent of the area.
  • Highways inside the boundary: Interstate 35, FM 2959 and Texas State Highway 77. State permit office: TxDOT Waco District.
  • Railroad track inside the boundary: none mapped.
  • Named streams inside the boundary: Pecan Creek.
  • Public water: City of Carl’s Corner, groundwater wells.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who does directional boring near Interstate 35 in Carl’s Corner?

We take directional boring work in Carl’s Corner, Hill County, where Interstate 35 and FM 2959 shape potential utility routes. The Census Bureau Vintage 2024 estimate puts the town’s population at 227. We install water, sewer, gas, electric conduit and fiber along routes such as Cornelius Road or across local roads, with the path and crossings checked for each job.

Our main office is in Yukon, Oklahoma, and Carl’s Corner work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. We have been directional boring since 1982, bringing four decades of practice to the town’s gravelly Eddy soil and weathered bedrock. Our family business started in 1965, and Trinity stays involved from the first call to the bore log.

Ditch Witch JT922 compact directional drill beside the Trinity Boring Solutions truck at NE 24th Street in Oklahoma City
Our Ditch Witch JT922 compact directional drill beside the Trinity truck on a sleeve bore at NE 24th Street in Oklahoma City. Photos on this page are from our jobs in Oklahoma and Texas.

How does Eddy soil affect a bore in Carl’s Corner?

The USDA soil survey maps Eddy soil across 66 percent of Carl’s Corner, with very gravelly clay loam as the leading surface texture. The mapped texture at about 40 inches is bedrock across 91 percent of the area, while silty clay loam is mapped across 7 percent. Average clay content at that depth is 32 percent. The survey maps soil patterns, not conditions from a test boring. Gravelly clay loam can grip the reamer and swell around pipe, so we plan staged reaming and manage drilling fluid to suit the ground.

USDA soil survey, inside the Carl’s Corner city limitsWhat is mapped
Soil series mappedEddy 66 percent, Stephen 15 percent, Austin 10 percent and Sunev 7 percent
Texture at the surfacevery gravelly clay loam 66 percent, silty clay 25 percent and clay loam 7 percent
Texture about 40 inches downbedrock 91 percent and silty clay loam 7 percent
Engineering class about 40 inches downlean clay (CL) 7 percent
Average clay content about 40 inches down32 percent
Bedrock mapped within 60 inches91 percent of the area (0 percent hard rock, 91 percent weathered rock)
Seasonal water table within 60 inches0 percent of the area
Flood prone soils1 percent of the area
High corrosion risk for uncoated steel26 percent of the area

Weathered bedrock is mapped within 60 inches across 91 percent of Carl’s Corner, and the typical mapped depth is 13 inches; hard bedrock is not mapped within that depth. The soil survey maps no seasonal water table within 60 inches, while flood prone soils cover 1 percent. We consider casing and tracer wire for the high steel corrosion risk mapped across 26 percent, while accounting for Eddy soil in Carl’s Corner bore planning. The geologic map names Austin Chalk of Late Cretaceous age. Weathered chalk can slow drilling compared with soil.

How do crews handle bedrock in Carl’s Corner?

With weathered bedrock mapped across much of Carl’s Corner, we match the bit and fluid plan to the ground found along the route. Cornelius Road and Pecan Creek crossings need their own path and access review.

  1. Eddy very gravelly clay loam can stick to a reamer, so we plan staged reaming and fluid suited to the ground along Cornelius Road.
  2. With weathered bedrock mapped near the surface in Carl’s Corner, we allow for slower drilling and use a bit suited to the material encountered.
  3. Before a bore near Blue Sky Drive, we hydrovac pothole each marked utility on the route; surface paint alone does not show its depth.
  4. At Pecan Creek, we track the drill head from the surface, log depth and pitch, and plan the route below the channel.
Rock bit on the drill rod at the front of a Vermeer D24x40 S3 with broken sandstone at the entry of a rock bore in Guthrie, OK
Rock bit on the drill rod with broken sandstone at the entry of a rock bore in Guthrie, Oklahoma.

Could a bore cross Cornelius Road in Carl’s Corner?

Interstate 35 runs 4.9 mapped roadway miles inside Carl’s Corner, with FM 2959 and Texas State Highway 77 also within the town limits. TxDOT right of way along those highways can affect a utility route. Cornelius Road is the longest named local street, with 1.95 miles in town; Linda Road has 1.56 miles and Blue Sky Drive has 1.15 miles. Bluebonnet Lane adds another possible local route. A bore can pass beneath pavement without cutting the surface, subject to the route and approvals.

CrossingTypeMapped extentWho has a say
Interstate 35Interstate4.9 roadway miles insideState highway office
FM 2959State highway2.8 roadway miles insideState highway office
Texas State Highway 77State highway1 roadway miles insideState highway office
Pecan CreekStream0.43 channel miles insideChecked for Corps of Engineers jurisdiction
White Rock CreekStream nearby0.1 miles outsideChecked for Corps of Engineers jurisdiction
Little Hackberry CreekStream nearby0.9 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

No railroad is mapped inside Carl’s Corner or within one mile outside its limits, so no local track crossing appears in the records. Pecan Creek runs 0.43 channel miles in town, and two mapped street crossings of named streams are present. With no lakes or ponds mapped within one mile, we plan Carl’s Corner bores to account for Pecan Creek crossings. A creek route needs a depth plan that stays under the channel, and Pecan Creek is checked for U.S. Army Corps of Engineers jurisdiction during planning.

Who has to sign off on a bore in Hill County near Carl’s Corner?

Interstate 35, FM 2959 and Texas State Highway 77 are state highways, so work in their right of way needs a TxDOT utility permit. The TxDOT Waco District reviews the application. The utility that owns the line files through TxDOT’s online RULIS system; we prepare the bore plan and profile for that owner’s application and work under its permit. We treat Cornelius Road as a city street because Carl’s Corner is incorporated, and plan boring around city ownership. A Pecan Creek crossing is checked for federal jurisdiction during planning, and no railroad crossing is mapped here.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Who owns the lines near the City of Carl’s Corner water system?

The City of Carl’s Corner public water system draws from groundwater wells and has 45 service connections serving 130 people. For an electric conduit route near Cornelius Road, the specific line owner has to be confirmed before we plan the bore. Oncor Electric Delivery Company, Texas-New Mexico Power, HILCO Electric Cooperative, Navarro County Electric Cooperative and Navasota Valley Electric Cooperative report electric service in Hill County; that list does not identify the provider for every address.

Line ownerWhat it isSourceSize
City of Carl’s CornerPublic water systemGroundwater wells45 connections, 130 people served
Oncor Electric Delivery Company, Texas-New Mexico Power, HILCO Electric Cooperative, Navarro County Electric Cooperative and Navasota Valley Electric CooperativeElectric utilities reporting service in Hill CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

American Community Survey 2019 to 2023 five year estimates put Carl’s Corner’s median housing year at 2001. The survey estimates 52 percent of homes were built in 2000 or later and 48 percent from 1960 to 1999, with none before 1960. That mix can mean both new service routes and replacement lines. Before a bore near Bluebonnet Lane, we hydrovac pothole each marked utility on the route; paint shows position, not depth.

Coiled black HDPE conduit fitted with a pulling grip staged on a lawn along a completed bore path
Coiled HDPE conduit fitted with a pulling grip, staged on a lawn along a finished bore path.

Do you cover Carl’s Corner and nearby Hillsboro?

Carl’s Corner is in Hill County, covers 3.14 square miles and sits at an elevation of 817 feet. Carl’s Corner’s ZIP codes are 76670 and 76645, so we verify each bore location rather than relying on ZIP boundaries. Hillsboro is 6.4 miles southwest and is both the nearest larger city and the county seat; Milford is 6.6 miles northeast, Itasca is 7.6 miles northwest, Bynum is 8.5 miles south and Mertens is 9.5 miles east. Our Yukon yard is 269 road miles away, a 5.2 hour drive, so that distance is part of planning mobilization for a Carl’s Corner job.

Places near Carl’s Corner

What would we bore near Linda Road in Carl’s Corner?

  • Highway crossing: A route beneath Interstate 35 uses a bore or tunnel under existing pavement, with TxDOT right of way requirements addressed.
  • Water service: A connection near the City of Carl’s Corner system can require a route from groundwater well service lines toward a property.
  • Fiber route: A conduit bore along Cornelius Road can avoid cutting the street while marked utilities are exposed before drilling near them.
  • Creek crossing: A route beneath Pecan Creek needs channel depth planning and a check for U.S. Army Corps of Engineers jurisdiction.
  • Local road crossing: A bore beneath Linda Road can carry water, sewer or conduit while leaving the road surface uncut.
  • Highway shoulder route: Work along FM 2959 right of way needs the utility owner’s TxDOT permit application and review by the Waco District.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What drives the price of a Carl’s Corner bore near Bluebonnet Lane?

A map pin near Bluebonnet Lane or Pecan Creek matters because the exact route sets which streets, drainage and marked utilities a bore must avoid. For a Carl’s Corner quote, send the address or pin, what is going in the ground, pipe or conduit size and footage. A sketch or plans help us see the route and access.

A short route on open ground with few crossings is simpler to plan than a long bore through Eddy soil and weathered chalk. Price depends on length, pipe or conduit size, ground conditions, utilities to expose, pavement, creek crossings, pits, excavator time and backfill. Interstate 35 right of way can add permit and crossing details, while Pecan Creek needs channel planning. Mobilization also reflects Carl’s Corner’s 269 road miles from Yukon, and high profile or emergency work can add demands.

Questions people ask about boring in Carl’s Corner

Does Trinity take directional boring jobs in Carl’s Corner, Hill County?

Yes. We take jobs in Carl’s Corner and staff them with our own crews or from satellite yards operated by partner drilling contractors we have vetted. You work with Trinity throughout the job, from the first call through the bore log, whether the route is near Cornelius Road or Interstate 35.

What ground should I expect for a bore in Carl’s Corner around Eddy soil?

The USDA soil survey maps Eddy very gravelly clay loam across 66 percent of Carl’s Corner. At about 40 inches, bedrock is mapped across 91 percent and silty clay loam across 7 percent. Those are mapped patterns, not test results from a particular route, so the plan accounts for conditions near the proposed bore.

Is there rock close to the surface for a Carl’s Corner bore?

Weathered bedrock is mapped within five feet across 91 percent of Carl’s Corner, with a typical mapped depth of 13 inches. In Carl’s Corner, hard bedrock is not mapped within that depth; we plan bores with Austin soil conditions in mind. Austin Chalk is the named geologic unit, so a bore may need a slower approach if it encounters weathered chalk.

Who approves a bore under Interstate 35 in Carl’s Corner?

For work in Interstate 35 right of way, the utility owner applies for the TxDOT utility permit through RULIS, and the TxDOT Waco District reviews it. We provide the bore plan and profile for the owner’s filing. The applicable permit sets the approved route and may specify depth.

Can a utility line be bored under Pecan Creek in Carl’s Corner?

A bore can be planned beneath Pecan Creek, which has 0.43 channel miles in Carl’s Corner. The route must be planned below the channel, and the crossing is checked for U.S. Army Corps of Engineers jurisdiction. The mapped stream crossings and site conditions help shape the bore plan.

Who runs Carl’s Corner’s public water system in Hill County, and where is its source?

The City of Carl’s Corner owns the public water system, which uses groundwater wells. Public records list 45 service connections serving 130 people. For a bore near the system, the proposed route and the line owner still need to be confirmed at the specific location.

Can I reach Trinity after hours about an urgent bore near Blue Sky Drive in Carl’s Corner?

Yes. Call (405) 409-7423; a person answers the phone 24 hours a day. If an urgent bore is near Blue Sky Drive, share the location and what line is involved so we can understand the immediate scope.

How early should I call Texas811 for a Carl’s Corner bore along Cornelius Road?

Count back at least 48 hours, excluding Saturdays, Sundays and legal holidays, from the planned start; Texas811 describes that as at least two working days. Request the locate no earlier than 14 days before work. If the start moves more than 14 days past the original notice, make a new request; refresh worn or moved marks through Texas811 before continuing near Cornelius Road.

What affects the price of directional boring near Interstate 35 in Carl’s Corner?

The job details determine the price: length, pipe or conduit size, Eddy soil and weathered bedrock, utilities to expose, pavement, pits and creek crossings all matter. Interstate 35 work can involve right of way permitting, and Pecan Creek adds channel planning. Mobilization also reflects the road distance from the Yukon yard.

Where the Carl’s Corner facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Carl’s Corner

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Carl's Corner, Texas

Type the address of your job in Carl's Corner. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Carl's Corner

Same county: Whitney · Hubbard · Blum · Abbott · Mount Calm · Covington · Malone · Penelope · Aquilla. All counties: Texas county list.