trinityboringsolutions.com

Comfort Texas Directional Boring: Tarpley Clay, Guadalupe River and Interstate 10

Quick Answer: We do directional boring, also called horizontal directional drilling (HDD), for routes across Interstate 10 and other Comfort crossings. Comfort is 467 road miles from our Yukon, Oklahoma main office, and the Guadalupe River is one local crossing to plan around. Tarpley clay and mapped bedrock can affect drilling and reaming, so the bore plan has to fit the route. We handle lines from 3/4 inch service lines to 48 inch casing.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Comfort bores at a glance

  • Unincorporated community in Kendall County, Texas. Population 2,211 (2020 Census count).
  • Road distance from our Yukon, Oklahoma main office: 467 miles, about 9.5 hours of driving.
  • Ground: Tarpley soil is mapped on 18 percent of the area, with bedrock about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 35 percent of the area.
  • Highways inside the boundary: Interstate 10, US 87, RM 473 and Texas State Highway 27. State permit office: TxDOT San Antonio District.
  • Railroad track inside the boundary: none mapped.
  • Named streams inside the boundary: Guadalupe River and Cypress Creek.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who does directional boring near the Guadalupe River in Comfort?

We take directional boring work in Comfort, an unincorporated community in Kendall County. The Census Bureau counted 2,211 people in 2020; it does not publish yearly estimates for unincorporated places. We install water, sewer, gas, electric conduit and fiber, including routes along 5th Street, High Street or toward a Guadalupe River crossing.

Our main office is in Yukon, Oklahoma, and Comfort work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. We are a family business that started in 1965, and we have done directional boring since 1982. Our range from small service lines to large casing suits routes from 5th Street to Interstate 10.

Compact Ditch Witch drill rig boring a new utility line across a front yard on a residential street in Edmond, Oklahoma
Our compact Ditch Witch drill boring a new utility line across a front yard on a residential street in Edmond, Oklahoma. Photos on this page are from our jobs in Oklahoma and Texas.

What is the ground like to bore in Comfort near Tarpley soil?

The USDA soil survey maps Tarpley clay across 18% of Comfort, with Nuvalde silty clay and Oakalla silty clay loam also common. Silty clay makes up 34% of the mapped surface texture, while clay makes up 20%. At about 40 inches below the surface, the survey maps bedrock across 35% of the area and clay across 26%; these are mapped patterns, not test borings. Sticky clay can build up on a reamer, so staged reaming and a same day pull can help keep the hole workable.

USDA soil survey, inside the Comfort mapped community boundaryWhat is mapped
Soil series mappedTarpley 18 percent, Nuvalde 14 percent, Oakalla 13 percent, Barbarosa 12 percent and Boerne 9 percent
Texture at the surfacesilty clay 34 percent, silty clay loam 25 percent and clay 20 percent
Texture about 40 inches downbedrock 35 percent, clay 26 percent and silty clay loam 13 percent
Engineering class about 40 inches downlean clay (CL) 36 percent, fat clay (CH) 20 percent and clean gravel (GP) 9 percent
Average clay content about 40 inches down31 percent
Bedrock mapped within 60 inches35 percent of the area (22 percent hard rock, 14 percent weathered rock)
Seasonal water table within 60 inches0 percent of the area
Flood prone soils31 percent of the area
High corrosion risk for uncoated steel66 percent of the area

Bedrock is mapped within 40 inches across 35% of Comfort, with typical depth listed as 19 inches; hard bedrock is mapped within 60 inches across 22%. The Glen Rose Formation, of Albian age, includes limestone, dolostone and marl, so the soil to rock contact may affect steering. Seasonal water tables are not mapped within 60 inches, but flood prone soils cover 31% of the area. High steel corrosion risk is mapped across 66%, which makes casing and tracer wire material a line owner decision.

How do crews handle bedrock on a Comfort bore?

Tarpley clay and mapped bedrock call for a bore plan that accounts for changing ground. Along routes near the Guadalupe River, we also plan the path and pits around the crossing.

  1. In Tarpley clay, we use a thinner drilling fluid and polymer, then open the hole in stages so sticky material does not pack onto the reamer.
  2. Where Comfort’s mapped hard bedrock lies along the route, we select rock drilling equipment and allow more time for the change from soil to rock.
  3. Near the Guadalupe River, we plan the bore depth beneath the channel and position pits on land rather than cutting the creek bank.
  4. Along High Street, we track the drill head from the surface and record depth and pitch, while hydrovac potholing exposes marked lines before drilling near them.
Rod box on the Vermeer D24x40 S3 Navigator with the bore path heading toward the trees on a rock bore in Guthrie, OK
Rod box on our Vermeer D24x40 with the bore path heading toward the trees on a rock bore in Guthrie, Oklahoma.

Which roads, tracks or creeks might a Comfort bore cross near Interstate 10?

Interstate 10, US 87, RM 473 and Texas State Highway 27 run inside Comfort’s mapped community boundary. Under existing highway pavement, TxDOT rules call for boring or tunneling rather than open trenching, and rural highway crossings extend beneath all travel lanes. High Street, 5th Street and Pankratz Road are among the longest named local streets. Their routes and nearby pavement affect pit placement and the bore path, especially where a line must pass beneath a road without cutting its surface.

CrossingTypeMapped extentWho has a say
Interstate 10Interstate3.5 roadway miles insideState highway office
US 87US highway2.5 roadway miles insideState highway office
RM 473State highway2 roadway miles insideState highway office
Texas State Highway 27State highway1.5 roadway miles insideState highway office
Guadalupe RiverStream2.64 channel miles insideChecked for Corps of Engineers jurisdiction
Cypress CreekStream1.79 channel miles insideChecked for Corps of Engineers jurisdiction
Flat Rock CreekStream nearby0.2 miles outsideChecked for Corps of Engineers jurisdiction
North CreekStream nearby0.4 miles outsideChecked for Corps of Engineers jurisdiction
Holiday CreekStream nearby0.4 miles outsideChecked for Corps of Engineers jurisdiction
Wilson CreekStream nearby0.5 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

No railroad is mapped inside Comfort or within one mile outside the community boundary, and no street and rail crossings are mapped. The Guadalupe River runs 2.64 channel miles inside the community, while Cypress Creek runs 1.79 channel miles. Seven mapped street crossings of named streams make creek locations relevant to routing. A river or creek crossing is checked for U.S. Army Corps of Engineers jurisdiction during planning.

Who has to sign off on a Comfort bore in Kendall County?

Comfort has no city government, so street approvals belong to Kendall County or the state, depending on the road. A bore under Interstate 10, US 87, RM 473 or Texas State Highway 27 in right of way needs a TxDOT utility permit, reviewed by the TxDOT San Antonio District. The utility owner files in TxDOT’s RULIS system; we prepare the bore plan and profile for that filing. TxDOT cover rules set the depth, including 60 inches for electric and communication lines at crossings, subject to district permit terms. A Guadalupe River crossing is checked for federal jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

What is already in the ground in Kendall County near Comfort?

The water provider for a specific Comfort address has to be confirmed with Kendall County or the local water district before a bore is planned. EPA drinking water records do not tie a system to this community, so the provider cannot be matched from those records. Electric service reported in Kendall County includes City of San Antonio, Bandera Electric Cooperative, Central Texas Electric Cooperative and Pedernales Electric Cooperative. We confirm the line owner for the address before planning an electric conduit route near High Street or Interstate 10.

Line ownerWhat it isSourceSize
City of San Antonio, Bandera Electric Cooperative, Central Texas Electric Cooperative and Pedernales Electric CooperativeElectric utilities reporting service in Kendall CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Comfort’s median housing year at 1992; 26% of homes were built before 1960, while 19% date to 2000 or later. A replacement route along High Street may need to work around older buried lines, while a new service has its own path to clear. Paint shows a marked utility’s position, not its depth, so we use hydrovac potholing to expose marked lines before the drill approaches them.

Yellow polyethylene gas pipe pulled through a directional bore beside a commercial building
Yellow polyethylene gas pipe pulled through a directional bore beside a commercial building.

How far is Comfort from Kerrville and our Yukon office?

Comfort is an unincorporated Kendall County community at an elevation of 1,444 feet, covering 3.47 square miles, with ZIP code 78013. It sits 14.3 miles east of Kerrville and 9.0 miles east of Center Point; Boerne, the county seat, is 16.7 miles southeast. The mapped community has 32.96 public road centerline miles, including High Street and 5th Street. From our Yukon, Oklahoma main office, the route is 467 road miles and a 9.5 hour drive, so distance is part of planning mobilization for a Comfort job.

Places near Comfort

What would we bore near High Street in Comfort?

  • Highway crossing: A route beneath Interstate 10 is bored or tunneled under existing pavement, with the path extending beneath all rural travel lanes.
  • Water service: A service along High Street needs an address specific water provider check and a route clear of marked buried lines.
  • Fiber conduit: A conduit route near 5th Street can be bored beneath pavement, with potholing to verify marked utilities along the path.
  • Creek crossing: A bore beneath Cypress Creek needs a planned channel depth and a check for U.S. Army Corps of Engineers jurisdiction.
  • Road crossing: A line beneath Pankratz Road can pass below the road surface, with entry and exit pits placed off the pavement.
  • Acreage service: A route toward Scout Airport can be sized for the required line and footage, with the access path checked before drilling.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What do you need to quote a bore near 5th Street in Comfort?

For a route near 5th Street, send the address or map pin, what is going in the ground, the pipe or conduit size and the footage; a sketch or plans help. Include the nearest crossing, such as Interstate 10 or Cypress Creek, because it can change access and bore layout. We can discuss the scope by phone at (405) 409-7423.

The job details shape the price: ground conditions such as Tarpley clay and mapped bedrock affect drilling, while creek crossings and pavement near Interstate 10 affect the route and work area. Pipe size, length, exposed utilities, pits, excavator time and sand backfill also matter. Mobilization reflects Comfort’s 467 road miles from Yukon, and high profile or emergency work can add planning demands.

Questions people ask about boring in Comfort

Does Trinity take directional boring work in Comfort and Kendall County, and who staffs it?

Yes. We take work in Comfort and across Texas, with our own crews and vetted partner drilling contractors supporting the work from satellite yards. You work with Trinity from the first call through the bore log, including on a route near Interstate 10 or the Guadalupe River.

Can you bore a line under the Guadalupe River in Comfort?

A bore under the Guadalupe River can be planned around the channel, with depth and entry and exit locations considered for the route. The river has 2.64 channel miles inside Comfort, and its crossing is checked for U.S. Army Corps of Engineers jurisdiction during planning.

Who owns electric lines in Comfort and Kendall County, and who confirms conduit specs?

The line owner for the specific Comfort address needs to be confirmed before we plan an electric conduit bore. Utilities reporting electric service in Kendall County include Bandera Electric Cooperative and Pedernales Electric Cooperative, among others. The confirmed owner can clarify conduit specifications for a route near 5th Street.

Who is in charge of Pankratz Road in Comfort, and does it need to be cut?

Comfort is unincorporated and has no city government, so street authority rests with Kendall County or the state, depending on the road. A bore can pass below Pankratz Road without cutting the pavement. The road owner and route conditions determine the applicable approval.

How old are buried lines near High Street in Comfort, and can they be replaced by bore?

The American Community Survey 2019 to 2023 estimates put Comfort’s median housing year at 1992, with 26% of homes built before 1960. Those figures do not date individual buried lines, so a replacement route near High Street needs utility locating and potholing before drilling near marked lines.

Could groundwater or flood prone ground affect a Comfort bore near the Guadalupe River?

Seasonal water tables are not mapped within 60 inches in Comfort, but flood prone soils cover 31% of the area. A route near the Guadalupe River still needs site specific planning for the channel and work pits. Creek crossings are also checked for federal jurisdiction during planning.

Does Trinity cover Center Point and rural sites outside Comfort?

Yes. We take work across Texas, including routes around Center Point and rural sites beyond Comfort’s mapped community boundary. Center Point is 9.0 miles west of Comfort, and our crews and vetted drilling partners can support work from satellite yards without a local Trinity office.

How much 811 notice is needed for a bore near 5th Street in Comfort?

For a bore near 5th Street, Texas law requires the locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before. If the start slips more than 14 days past the original notice, request a new ticket. Have worn or moved marks refreshed through Texas811 before work continues.

What affects the cost of a directional bore near Interstate 10 in Comfort?

The scope drives the price, not one detail alone. Length, pipe or conduit size, Tarpley clay and bedrock, pavement, utility crossings, pits and equipment time all matter. A route near Interstate 10 may add crossing requirements, while Comfort’s 467 road miles from Yukon affect mobilization.

Where the Comfort facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Comfort

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Comfort, Texas

Type the address of your job in Comfort. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Comfort

Same county: Fair Oaks Ranch. All counties: Texas county list.