Directional Boring Contractors in Collingsworth County, TX
Trinity Boring Solutions is a directional boring contractor serving Collingsworth County, Texas, installing water, sewer, gas, electric and fiber lines without an open trench in Wellington and Dodson. From the Trinity main office in Yukon, Oklahoma it is about 184 road miles west to Wellington, the county seat. Bores here most often pass under US 83 and State Highway 203 and the Salt Fork Red River. Call (405) 409-7423 any time.
Free Bore Planner
Plan Your Bore in Collingsworth County, Texas
Type the address of your job in Collingsworth County. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
What Should You Know Before Boring in Collingsworth County?
Collingsworth County covers 918 square miles, has about 2,611 residents and sits in the TxDOT Childress District.
| County seat | Wellington |
|---|---|
| Population | 2,611 (2024 Census estimate), down 1.6% since 2020 |
| Land area | 918 square miles |
| Largest cities and towns | Wellington (1,857) and Dodson (93) |
| TxDOT district | TxDOT Childress District |
| 811 center | Texas811 (call 811), two working days of notice |
| Electric utilities | Southwestern Electric Power, Greenbelt Electric Cooperative and Lighthouse Electric Cooperative |
| Interstate and US highways | US 83 |
| State Highways | 203 |
| State loops and spurs | Loop 204 |
| Rivers | Salt Fork Red River |
| Creeks and other streams | Elm Creek, Buck Creek, Wolf Creek, Sand Creek, Dry Salt Creek, Wet Salt Creek, Richardson Creek and Dozier Creek |
| Railroads | No main line track |
| Average precipitation | 24.2 inches a year (1991 to 2020) |
| Road distance from Trinity main office | About 184 miles from Yukon, Oklahoma to Wellington |
| Trinity insurance | General liability of $1,000,000 per occurrence and $4,000,000 aggregate, plus $5,000,000 excess liability |
Sources: Census Bureau (2024 population, 2025 building permits, TIGER/Line roads and water), EIA Form 861 (2025), NOAA 1991 to 2020 precipitation, federal rail network map, TxDOT districts, OpenStreetMap routing. Checked November 2026.
What Does a Bore Have to Cross in Collingsworth County?
A bore in Collingsworth County most often has to cross a highway such as US 83 or State Highway 203 and a stream such as the Salt Fork Red River, Elm Creek or Buck Creek. State Highways 203 also run through the county, along with Loop 204. The Census map names 25 larger streams in Collingsworth County, led by the Salt Fork Red River, Elm Creek, Buck Creek, Wolf Creek, Sand Creek and Dry Salt Creek. The rest are Wet Salt Creek, Richardson Creek, Dozier Creek, Lake Creek, House Log Creek, Willow Creek, Crow Creek, Gyp Creek, Wills Creek, North Elm Creek, Roundup Creek, O M Creek, Big Sandy Creek, Little Buck Creek, Cottonwood Creek, Raven Creek, Jonah Creek, Panther Creek and Indian Creek. There is no main line railroad in Collingsworth County.

What Is the Ground Like for Directional Boring in Collingsworth County?
The ground in Collingsworth County is mixed: according to the federal soil survey, loam is the most common surface soil, sandy layers on about 35 percent and bedrock within five feet on about 27 percent. Tooling and drilling fluid for a bore in Collingsworth County are matched to what potholing finds on the path. May is the wettest month in Collingsworth County at 3.6 inches on average and January the driest at 0.8. Collingsworth County averages 24.2 inches of precipitation a year, so the ground is usually dry at bore depth.
- Most common soils: Miles (17%), Woodward (12%) and Springer (9%).
- Surface texture: most often loam (31%) or loamy fine sand (18%).
- Bedrock within 5 feet: about 27% of the county. Most of it is soft, weathered rock.
- Clay rich layer (35% clay or more) in the top 5 feet: about 9% of the county.
- Sandy layer (70% sand or more) in the top 5 feet: about 35% of the county.
Source: USDA Natural Resources Conservation Service, Soil Survey Geographic Database, Collingsworth County, Texas (survey area TX087, version 25, September 3, 2026), through Web Soil Survey. Percentages are shares of mapped county area.
Who Permits a Bore in Collingsworth County?
The TxDOT Childress District permits bores under state highways in Collingsworth County, the Collingsworth County Commissioners Court handles county roads, and Wellington and Dodson each handle their own streets.
- State highways. US 83, the other numbered state routes and the farm to market roads in Collingsworth County are on the state system. The utility owner files a TxDOT utility permit in RULIS.
- Texas811 locates. Texas811 needs at least two working days of notice before digging (Texas811 FAQ; Texas Utilities Code, Section 251.151).
- Water crossings. A bore under the Salt Fork Red River or Elm Creek is checked for U.S. Army Corps of Engineers jurisdiction while the path is planned.
Statewide rules are on the Directional Boring Texas page, and Trinity supplies the bore plan and profile for the permit package.
Which Electric Utilities Serve Collingsworth County?
Southwestern Electric Power, Greenbelt Electric Cooperative and Lighthouse Electric Cooperative serve Collingsworth County, according to 2025 filings with the U.S. Energy Information Administration. Southwestern Electric Power is an investor owned utility; Greenbelt Electric Cooperative and Lighthouse Electric Cooperative are member owned cooperatives. The owner of the line sets the conduit size, depth and inspection steps, so it is confirmed before a conduit bore in Collingsworth County is planned. More on electric line boring for electric cooperatives.
Is Collingsworth County Growing?
The population of Collingsworth County went from 2,653 in 2020 to 2,611 in 2024, a loss of 1.6 percent. In Collingsworth County the usual job is a replacement line, a rural water or fiber extension, or a road crossing for an existing utility.
Which Cities and Towns in Collingsworth County Does Trinity Serve?
Trinity takes directional boring work in all 2 incorporated places in Collingsworth County and at sites outside city limits, and Wellington is the largest with about 1,857 residents.
| City or town | 2024 population |
|---|---|
| Wellington | 1,857 |
| Dodson | 93 |
Source: U.S. Census Bureau 2024 estimates, counting only the part of each city inside Collingsworth County.
Collingsworth County borders Childress County, Donley County, Gray County, Hall County, Wheeler County, Beckham County, Oklahoma and Harmon County, Oklahoma; every county is on the Directional Boring in All 254 Texas Counties page. The neighboring county seats are Childress (Childress), Clarendon (Donley), Pampa (Gray), Memphis (Hall) and Wheeler (Wheeler).
Which Directional Boring Services Are Available in Collingsworth County?
Every Trinity service is available in Collingsworth County: horizontal directional drilling from 3/4 inch service lines to 48 inch casing, auger boring, hydrovac potholing, trenching and 24 hour emergency response, all listed under Underground Utility and Boring Services.
- Road, highway, railroad, creek and river bore crossings, including US 83, State Highway 203 and the Salt Fork Red River
- Drinkable water line boring and sewer force mains in Wellington or Dodson and on rural water systems
- Underground conduit in Southwestern Electric Power and Greenbelt Electric Cooperative territory, see electric line boring
- Fiber optic boring for ISPs and broadband builders along US 83
- Municipal boring services for cities such as Wellington and Dodson
The free Bore Planner sizes a Collingsworth County job before you call.
Collingsworth County Directional Boring FAQs: What Do Customers Ask?
Does Trinity Boring Solutions work in Wellington, Texas?
Yes. Trinity Boring Solutions takes work in Wellington and Dodson and the rural parts of Collingsworth County. Trinity works in Texas with its own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted.
Who approves a bore under US 83 in Collingsworth County?
The TxDOT Childress District. The utility owner files the permit in the TxDOT RULIS system. County roads go through the Collingsworth County Commissioners Court and city streets through the city.
Is there rock in Collingsworth County?
Yes, in places. The federal soil survey records bedrock within five feet of the surface on about 27 percent of Collingsworth County, most of it soft, weathered rock. Potholing confirms it on the actual bore path.
Can a line be bored under the Salt Fork Red River in Collingsworth County?
Yes. A drill is steered below the bed of the Salt Fork Red River from a pit on each bank and the pipe is pulled back through, so the channel is not opened. Federal jurisdiction over the crossing is checked first.
Is Trinity insured for work in Collingsworth County?
Yes. Trinity Boring Solutions carries general liability of $1,000,000 per occurrence and $4,000,000 aggregate, plus $5,000,000 excess liability. Ask for a certificate with the quote.
How much does directional boring cost in Collingsworth County?
Length and pipe size give us a general range. Depth, the crossings and the ground set the number.
How Do You Get a Bore Quote in Collingsworth County?
Call (405) 409-7423 any time or send the address in Collingsworth County, the utility, the length and what it crosses. Trinity has bored since 1965 and is family owned.