Dodson Texas Directional Boring: Tipton Soil, FM 338 and Miles Loamy Fine Sand
Quick Answer: Can we put a line beneath FM 338 without cutting the road? Trinity Boring Solutions handles directional boring, also called horizontal directional drilling (HDD), for crossings on FM 338 and other Dodson routes. Dodson is 189 road miles from our Yukon, Oklahoma yard, and that distance affects mobilization for a Main Street job. Tipton fine sandy loam covers 52 percent of the mapped area; its sandy surface can cave behind the bit, so staged reaming helps hold the bore open.
Dodson bores at a glance
- Incorporated city in Collingsworth County, Texas. Population 93 (Census Bureau 2024 estimate).
- Road distance from our Yukon, Oklahoma main office: 189 miles, about 3.9 hours of driving.
- Ground: Tipton soil is mapped on 52 percent of the area, with clay loam about 40 inches down.
- Rock: no bedrock is mapped in the top 60 inches.
- Highways inside the boundary: FM 338 and FM 1642. State permit office: TxDOT Childress District.
- Railroad track inside the boundary: none mapped.
- Public water: City of Dodson, groundwater wells.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Which contractor handles directional boring near Dodson and FM 338?
Can we get your line beneath FM 338 or a Dodson street without opening the surface? Yes, we take directional boring work in Dodson, Collingsworth County, and can install water, sewer, gas, electric conduit or fiber beneath local roads. The Census Bureau Vintage 2024 estimate puts the town at 93 people. The line type and its route determine the bore plan, including where we expose existing utilities.
Our main office is in Yukon, Oklahoma, and Dodson work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our range runs from 3/4 inch service lines to 48 inch casing, with bores from 10 feet to 5,000 feet. That spans a small service bore along Templeton Avenue to a larger casing crossing at FM 338. Our family business began in 1965, and we have done directional boring since 1982; Dodson is 189 road miles from our Yukon main office.

What kind of ground does Dodson Tipton soil put around a bore?
The USDA soil survey maps Tipton soil across 52 percent of Dodson, with Miles soil at 36 percent and Grandfield at 12 percent. Fine sandy loam is the mapped surface texture across 87 percent of the town, and loamy fine sand accounts for 13 percent. At about 40 inches below the surface, clay loam is mapped under 52 percent and sandy clay loam under 47 percent. Tipton, Miles, and Grandfield are mapped soil patterns in Dodson, not test borings, so we verify ground conditions before setting a bore plan. The sandy surface can loosen behind the drill, while the clay loam deeper down can cling to the reamer.
| USDA soil survey, inside the Dodson city limits | What is mapped |
|---|---|
| Soil series mapped | Tipton 52 percent, Miles 36 percent and Grandfield 12 percent |
| Texture at the surface | fine sandy loam 87 percent and loamy fine sand 13 percent |
| Texture about 40 inches down | clay loam 52 percent and sandy clay loam 47 percent |
| Engineering class about 40 inches down | lean clay (CL) 76 percent and clayey sand (SC) 24 percent |
| Average clay content about 40 inches down | 28 percent |
| Bedrock mapped within 60 inches | None mapped |
| Seasonal water table within 60 inches | 0 percent of the area |
| Flood prone soils | 0 percent of the area |
| High corrosion risk for uncoated steel | 0 percent of the area |
USDA mapping shows no bedrock mapped in Dodson’s top five feet; with fine sandy loam at the surface, we do not assume deeper conditions. Seasonal water tables, flood prone soils and high steel corrosion risk are not mapped. Sand sheet deposits of Holocene age and Guadalupian sedimentary deposits of Permian age are mapped here. The sand can cave after the bit passes, so staged reaming helps support the hole; the clay loam can hold an open hole and grip pipe, calling for controlled fluid and a prompt pull.
How do we drill Dodson ground with clay loam below the surface?
Dodson’s fine sandy loam surface and mapped clay loam at about 40 inches call for different handling as the bore advances. We match fluid, reaming and pipe timing to the ground along the route.
- The USDA survey maps fine sandy loam across 87 percent of Dodson, so we use staged reaming to limit the chance of the sandy hole falling in before pipe is ready.
- With clay loam mapped at about 40 inches under 52 percent of town, we adjust drilling fluid and ream in stages to manage sticky cuttings and pipe grip.
- Before the drill approaches marked utilities along Cox Avenue, we hydrovac pothole them; the surface marks show position, not depth.
- As a bore advances beneath FM 338, a walkover locator tracks the drill head and we log its depth and pitch.

Where might a Dodson line pass beneath FM 338?
FM 338 has 1.2 mapped roadway miles inside Dodson, while FM 1642 has 0.7. A bore beneath either state highway keeps the road surface intact and needs a route planned for the highway right of way. Main Street is the longest named street at 0.99 miles within town limits. Templeton Avenue has 0.57 miles, and Cox Avenue has 0.56. Broadway Avenue also has 0.56 miles, giving local service and conduit routes several street options to consider.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| FM 338 | State highway | 1.2 roadway miles inside | State highway office |
| FM 1642 | State highway | 0.7 roadway miles inside | State highway office |
No railroad is mapped inside Dodson or within one mile outside the town limits, and the mapped street and rail crossing inventory shows none. No streams are mapped inside town or within one mile outside it, and no street crossings of named streams are mapped. The town also has no mapped unnamed drainage miles and no lakes or ponds within one mile. That leaves FM 338, FM 1642 and the named streets as the mapped road crossings to assess for a bore.
Who approves a Dodson bore in Collingsworth County?
For a line crossing FM 338 or FM 1642, the cover depth sets the bore profile: electric and communication lines need at least 60 inches below the lowest point of the crossed grade, and water lines need 60 inches. Along highway right of way, the minimums are 48 inches for electric and communication and 36 inches for water; pressurized sewer crossings need 60 inches. The utility owner applies through TxDOT’s online RULIS system, and the TxDOT Childress District reviews it. For an existing highway, TxDOT requires boring or tunneling beneath the road. Dodson’s city streets belong to the town; no railroad or stream crossing is mapped here.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Which utilities serve Dodson through the City of Dodson?
The City of Dodson public water system serves 93 people through 48 service connections and draws water from groundwater wells. For an electric conduit bore along Main Street or another Dodson route, Southwestern Electric Power, Greenbelt Electric Cooperative and Lighthouse Electric Cooperative report service in Collingsworth County. Those records do not establish which company owns a line at a particular address, so we confirm the line owner before setting conduit specifications.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| City of Dodson | Public water system | Groundwater wells | 48 connections, 93 people served |
| Southwestern Electric Power, Greenbelt Electric Cooperative and Lighthouse Electric Cooperative | Electric utilities reporting service in Collingsworth County | EIA Form 861 | Confirm the line owner by address |
A reliable housing age estimate is not published for a place as small as Dodson because the survey sample is too small to rely on. That means a replacement bore on Cox Avenue and a new service along FM 1642 need to be scoped from the actual line and route, not an assumed construction era. Before drilling near marked utilities, we use hydrovac potholing to expose them; paint shows where a line runs, not how deep it sits.

Do you cover Dodson and nearby Childress?
Dodson is an incorporated town in Collingsworth County, with 0.61 square miles of land and an elevation of 1,791 feet. Its ZIP code is 79230. Wellington, the county seat, is 12.6 miles northwest; Childress is 27.2 miles southwest and is the nearest larger city. Quail is 22.9 miles northwest, and Samnorwood is 24.6 miles northwest. From our Yukon, Oklahoma main office, Dodson is 189 road miles away, a 3.9 hour drive, which affects crew mobilization for work on Main Street or FM 338.
Places near Dodson
- Directional boring in Wellington: 12.6 miles northwest
- Directional boring in Quail: 22.9 miles northwest
- Directional boring in Samnorwood: 24.6 miles northwest
- Directional boring in Childress: 27.2 miles southwest
- Directional boring in Estelline: 28.2 miles southwest
What boring work could come up along Dodson Main Street?
- Highway crossing: A bore beneath FM 338 or FM 1642 keeps the roadway uncut, with the route and cover depth set for the state highway.
- Water service: A new connection from the City of Dodson system could run beneath a town street, with the groundwater line exposed before drilling near it.
- Fiber route: A conduit bore along Main Street can carry fiber without opening the street, subject to the marked utilities on its path.
- Sewer line: A replacement route near Templeton Avenue can pass under the street, with pipe size and any pressurized crossing needs included in the plan.
- Electric conduit: A route near Broadway Avenue needs the line owner identified before conduit specifications and the bore path are settled.
- Street service: A connection beneath Cox Avenue can keep pavement intact, with potholing used to check marked lines before the drill approaches.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What drives the price of a Dodson bore near Broadway Avenue?
A map pin matters near Broadway Avenue because the exact route determines whether a bore follows a street or crosses FM 338. Send the address or pin, what will go in the ground, pipe or conduit size and footage. A sketch or plans help us check the route, access and marked utilities before we prepare the scope.
A short service bore in the fine sandy loam near Main Street may be simpler to plan than a route that crosses FM 338 or needs work beneath pavement. Length, pipe size, soil changes, exposed utilities and the number of crossings all affect the job. Pits, excavator time, sand backfill and emergency timing can add work. Dodson’s 189 road miles from Yukon also affects mobilization, while a highway right of way requires a bore profile for the TxDOT permit.
Questions people ask about boring in Dodson
Does Trinity Boring Solutions take directional boring work in Dodson and Collingsworth County, and who staffs it?
Yes. We take directional boring work in Dodson and staff it with our crews or crews from partner drilling contractors we have vetted. For an FM 338 crossing in Dodson, we work with you from first call through bore log, alongside whichever crew is on site. For a route under FM 338, the crew follows the project plan and the permit issued to the utility owner.
As we plan directional boring in Collingsworth County, who runs Dodson’s public water system, and where does its water come from?
The City of Dodson owns and runs the public water system, which uses groundwater wells. In Collingsworth County, Dodson’s public water system serves 93 people through 48 service connections, scale we consider when planning underground work. For a water service bore beneath Main Street, the connection location and marked utilities help set the route and where potholing is needed.
Which electric utilities report service in Dodson and Collingsworth County, and who confirms conduit specifications?
Southwestern Electric Power, Greenbelt Electric Cooperative and Lighthouse Electric Cooperative report electric service in Collingsworth County. Those records do not identify the owner of every line along Cox Avenue. We confirm the line owner for the specific route before settling conduit specifications and planning the bore.
Who controls Dodson streets like Cox Avenue, and can a bore avoid cutting one?
Dodson is incorporated, so its city streets belong to the town. A directional bore beneath Cox Avenue can leave the surface intact, with entry and exit pits placed off the pavement. We first locate and expose marked utilities along the route so the drill path can account for them.
Is housing age data available for Dodson near Templeton Avenue, and what does that mean for replacement bores?
A reliable housing age estimate is not published for Dodson because the survey sample is too small. The age of a home on Templeton Avenue therefore cannot establish when its buried service was installed. We scope a replacement from the actual line location, size and route, and pothole marked utilities before drilling nearby.
What ground will a directional bore meet in Dodson’s Tipton soil?
The USDA soil survey maps Tipton soil across 52 percent of Dodson, with fine sandy loam common at the surface. At about 40 inches, clay loam is mapped under 52 percent of the town. Sandy soil can cave behind the bit, while the deeper clay loam can hold the hole and grip pipe, so reaming and fluid control matter.
How much Texas811 notice should I give for a Dodson bore on Main Street?
For a Main Street excavation, request locates through Texas811 at least two working days ahead, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before work. The ticket has a 20 day life. If the start slips more than 14 days past the original notice, request another ticket; worn or moved marks must be refreshed before work continues.
How far is Dodson from Yukon compared with Childress, and does that affect a bore?
Dodson is 189 road miles from our Yukon, Oklahoma main office, a 3.9 hour drive. Childress is 27.2 miles southwest of Dodson. The Yukon distance affects crew mobilization for a job on FM 1642 or a local street, so the route and work scope are part of planning.
What affects the cost of directional boring beneath FM 338 in Dodson?
The job’s length, pipe or conduit size, soil, utility crossings, pavement, pits and equipment time all affect the scope. A bore beneath FM 338 also needs a route and cover profile for the TxDOT permit, while a short service near Broadway Avenue may involve fewer obstacles. Mobilization from Yukon is another job factor.
Where the Dodson facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Dodson
- U.S. Census Bureau, TIGER/Line 2024: Dodson boundary, roads, rail lines and streams
- U.S. Census Bureau, Vintage 2024 population estimates: Dodson
- U.S. Census Bureau, American Community Survey 2019 to 2023: Dodson housing units and year built
- Macrostrat geologic map compilation: map units under Dodson
- U.S. EPA Safe Drinking Water Information System: public water systems serving Dodson
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Collingsworth County
- U.S. Geological Survey, Elevation Point Query Service: Dodson elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Dodson
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Dodson
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Dodson, Texas
Type the address of your job in Dodson. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Dodson
All counties: Texas county list.
