Directional Boring Contractors in Hemphill County, TX
Trinity Boring Solutions is a directional boring contractor serving Hemphill County, Texas, installing water, sewer, gas, electric and fiber lines without an open trench in Canadian. From the Trinity main office in Yukon, Oklahoma it is about 189 road miles west to Canadian, the county seat. Most Hemphill County bores go under US 83 and US 60, the Washita River and BNSF Railway track. Call (405) 409-7423 any time.
Free Bore Planner
Plan Your Bore in Hemphill County, Texas
Type the address of your job in Hemphill County. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
What Should You Know Before Boring in Hemphill County?
Hemphill County covers 906 square miles, has about 3,134 residents and sits in the TxDOT Amarillo District.
| County seat | Canadian |
|---|---|
| Population | 3,134 (2024 Census estimate), down 7.4% since 2020 |
| Land area | 906 square miles |
| Largest cities and towns | Canadian (2,169) |
| TxDOT district | TxDOT Amarillo District |
| 811 center | Texas811 (call 811), two working days of notice |
| Electric utilities | Southwestern Public Service, Greenbelt Electric Cooperative and North Plains Electric Cooperative |
| Interstate and US highways | US 83 and US 60 |
| State Highways | 33 |
| Rivers | Washita River, Canadian River and Dry Fork Washita River |
| Creeks and other streams | Red Deer Creek, Gageby Creek, Big Timber Creek, Persimmon Creek, Hackberry Creek, Elk Creek, West Fork Clear Creek and Major Creek |
| Lakes | Huston-Stickley Lake |
| Railroads | BNSF Railway, about 32 main line miles |
| Average precipitation | 23.3 inches a year (1991 to 2020) |
| Road distance from Trinity main office | About 189 miles from Yukon, Oklahoma to Canadian |
| Trinity insurance | General liability of $1,000,000 per occurrence and $4,000,000 aggregate, plus $5,000,000 excess liability |
Sources: Census Bureau (2024 population, 2025 building permits, TIGER/Line roads and water), EIA Form 861 (2025), NOAA 1991 to 2020 precipitation, federal rail network map, TxDOT districts, OpenStreetMap routing. Checked November 2026.
What Does a Bore Have to Cross in Hemphill County?
A bore in Hemphill County most often has to cross a highway such as US 83, US 60 or State Highway 33, a stream such as the Washita River, the Canadian River or Red Deer Creek and BNSF Railway track. State Highways 33 also run through the county. The Census map names 25 larger streams in Hemphill County, led by the Washita River, the Canadian River, Red Deer Creek, Gageby Creek, Big Timber Creek and Persimmon Creek. The rest are Hackberry Creek, Elk Creek, West Fork Clear Creek, Major Creek, Dry Fork Washita River, Clear Creek, Dry Fork Boggy Creek, Threemile Creek, Dry Oasis Creek, Horse Creek, Dads Creek, Oasis Creek, White Creek, Morgan Creek, West Horse Creek, East Prong Big Timber Creek, Dry Creek, Washburn Arroyo and Needmore Creek. Huston-Stickley Lake is the main mapped lake. The federal rail map shows about 32 miles of main line track in Hemphill County, owned by BNSF Railway.

What Is the Ground Like for Directional Boring in Hemphill County?
Sand is the main thing to plan for in Hemphill County: the federal soil survey records sandy layers in the top five feet on about 57 percent of the county, with fine sandy loam the most common surface soil. A bore through sand in Hemphill County is kept full of drilling fluid so the hole stands until pullback. June is the wettest month in Hemphill County at 3.4 inches on average and January the driest at 0.7. Hemphill County averages 23.3 inches of precipitation a year, so the ground is usually dry at bore depth.
- Most common soils: Springer (22%), Dreyfoos (13%) and Mobeetie (8%).
- Surface texture: most often fine sandy loam (25%) or loamy fine sand (23%).
- Bedrock within 5 feet: about 2% of the county. Most of it is hard rock.
- Clay rich layer (35% clay or more) in the top 5 feet: about 1% of the county.
- Sandy layer (70% sand or more) in the top 5 feet: about 57% of the county.
Source: USDA Natural Resources Conservation Service, Soil Survey Geographic Database, Hemphill County, Texas (survey area TX211, version 23, September 3, 2026), through Web Soil Survey. Percentages are shares of mapped county area.
Who Permits a Bore in Hemphill County?
The TxDOT Amarillo District permits bores under state highways in Hemphill County, the Hemphill County Commissioners Court handles county roads, and Canadian handles its own streets.
- State highways. US 83, US 60, the other numbered state routes and the farm to market roads in Hemphill County are on the state system. The utility owner files a TxDOT utility permit in RULIS.
- Texas811 locates. Texas811 needs at least two working days of notice before digging (Texas811 FAQ; Texas Utilities Code, Section 251.151).
- Railroads. A bore under BNSF Railway track in Hemphill County needs a crossing agreement from the railroad that owns it, which sets the casing, depth and flagging.
- Water crossings. A bore under the Washita River, the Canadian River, Red Deer Creek or Huston-Stickley Lake is checked for U.S. Army Corps of Engineers jurisdiction while the path is planned.
Statewide rules are on the Directional Boring Texas page, and Trinity supplies the bore plan and profile for the permit package.
Which Electric Utilities Serve Hemphill County?
Southwestern Public Service, Greenbelt Electric Cooperative and North Plains Electric Cooperative serve Hemphill County, according to 2025 filings with the U.S. Energy Information Administration. Southwestern Public Service is an investor owned utility; Greenbelt Electric Cooperative and North Plains Electric Cooperative are member owned cooperatives. Conduit bored in Hemphill County is built to the standard of whichever of them owns the line. More on electric line boring for electric cooperatives.
Is Hemphill County Growing?
The population of Hemphill County went from 3,384 in 2020 to 3,134 in 2024, a loss of 7.4 percent. In Hemphill County the usual job is a replacement line, a rural water or fiber extension, or a road crossing for an existing utility.
Which Cities and Towns in Hemphill County Does Trinity Serve?
Trinity takes directional boring work in Canadian, the only incorporated place in Hemphill County with about 2,169 residents, and at sites outside the city limits.
| City or town | 2024 population |
|---|---|
| Canadian | 2,169 |
Source: U.S. Census Bureau 2024 estimates, counting only the part of each city inside Hemphill County.
Hemphill County borders Gray County, Lipscomb County, Roberts County, Wheeler County, Ellis County, Oklahoma and Roger Mills County, Oklahoma; every county is on the Directional Boring in All 254 Texas Counties page. The neighboring county seats are Pampa (Gray), Lipscomb (Lipscomb), Miami (Roberts) and Wheeler (Wheeler).
Which Directional Boring Services Are Available in Hemphill County?
Every Trinity service is available in Hemphill County: horizontal directional drilling from 3/4 inch service lines to 48 inch casing, auger boring, hydrovac potholing, trenching and 24 hour emergency response, all listed under Underground Utility and Boring Services.
- Road, highway, railroad, creek and river bore crossings, including US 83, US 60 and the Washita River
- Bores under BNSF Railway track, built to the railroad boring requirements of the owner
- Drinkable water line boring and sewer force mains in Canadian and on rural water systems
- Underground conduit in Southwestern Public Service and Greenbelt Electric Cooperative territory, see electric line boring
- Fiber optic boring for ISPs and broadband builders along US 83
- Municipal boring services for Canadian
The free Bore Planner sizes a Hemphill County job before you call.
Hemphill County Directional Boring FAQs: What Do Customers Ask?
Does Trinity Boring Solutions work in Canadian, Texas?
Yes. Trinity Boring Solutions takes work in Canadian and the rural parts of Hemphill County. Trinity works in Texas with its own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted.
Who approves a bore under US 83 in Hemphill County?
The TxDOT Amarillo District. The utility owner files the permit in the TxDOT RULIS system. County roads go through the Hemphill County Commissioners Court and city streets through the city.
Is there rock in Hemphill County?
Not much. The federal soil survey records bedrock within five feet of the surface on about 2 percent of Hemphill County. Potholing confirms it on the actual bore path.
Can a line be bored under the Washita River in Hemphill County?
Yes. A drill is steered below the bed of the Washita River from a pit on each bank and the pipe is pulled back through, so the channel is not opened. Federal jurisdiction over the crossing is checked first.
Which railroads have track in Hemphill County?
BNSF Railway, with about 32 miles of main line track on the federal rail map. Each requires its own crossing agreement before a bore goes under the rails.
Is Trinity insured for work in Hemphill County?
Yes. Trinity Boring Solutions carries general liability of $1,000,000 per occurrence and $4,000,000 aggregate, plus $5,000,000 excess liability. Ask for a certificate with the quote.
How much does directional boring cost in Hemphill County?
A general range comes from the footage and the pipe size. Depth, the crossings and the ground set the number, and loose sand is a factor on many Hemphill County jobs.
How Do You Get a Bore Quote in Hemphill County?
Call (405) 409-7423 any time or send the address in Hemphill County, the utility, the length and what it crosses. Trinity has bored since 1965 and is family owned.