trinityboringsolutions.com

Glazier Texas Directional Boring: Springer Soil, US 60 and Persimmon Creek

Quick Answer: Water provider records do not identify the supplier for a Glazier address; three electric utilities report service in Hemphill County, so we confirm line ownership before a US 60 bore. We take directional boring, also called horizontal directional drilling (HDD), work in Glazier, Texas, including crossings beneath US 60. Glazier is 170 road miles from our Yukon, Oklahoma main office, and BNSF Railway also crosses the mapped community. Springer soil is mostly fine sandy loam, while sandy ground at about 40 inches can cave behind the bit and calls for staged reaming.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Glazier bores at a glance

  • Unincorporated community in Hemphill County, Texas. Population 60 (2020 Census count).
  • Road distance from our Yukon, Oklahoma main office: 170 miles, about 3.8 hours of driving.
  • Ground: Springer soil is mapped on 86 percent of the area, with fine sandy loam about 40 inches down.
  • Rock: no bedrock is mapped in the top 60 inches.
  • Highways inside the boundary: US 60, Texas State Highway 305 and RM 2758. State permit office: TxDOT Amarillo District.
  • Railroad track inside the boundary: BNSF Railway, with 1 mapped street and rail crossings.
  • Named streams inside the boundary: Persimmon Creek.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who can I call for Glazier directional boring near BNSF Railway?

We take directional boring work in Glazier, an unincorporated community in Hemphill County with a 2020 Census count of 60 people. A bore could carry water, sewer, gas, electric conduit or fiber beneath US 60, Texas State Highway 305 or Lipscomb Street. We plan the route around the lines already in the ground and the railroad corridor, rather than treating an open road shoulder as clear.

Our main office is in Yukon, Oklahoma, and Glazier work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our longest bore ran roughly 4,100 feet with 48 inch pipe under the Arkansas River in Tulsa. Beside that reach, a service bore near Lipscomb Street is a smaller job; our family business started in 1965 and has done directional boring since 1982.

Horizontal directional drill rig set up on an open grass field with support trucks and a vacuum excavation truck
Our horizontal directional drill set up in an open field with the support trucks and the vacuum excavation truck. Photos on this page are from our jobs in Oklahoma and Texas.

How does Glazier Springer soil affect a bore?

The USDA soil survey maps Springer soil across 86 percent of Glazier. Its mapped units include Springer fine sandy loam and Springer loamy fine sand, with fine sandy loam making up 59 percent of the surface texture. At about 40 inches, fine sandy loam accounts for 86 percent of the mapped texture, and the average clay content there is 14 percent. Glazier mapped patterns are planning references, not test borings, so we verify conditions before setting a route under US 60. The sandy share means the hole may loosen behind the bit, so we plan fluid and reaming to keep it open until pipe is ready.

USDA soil survey, inside the Glazier mapped community boundaryWhat is mapped
Soil series mappedSpringer 86 percent, Grandfield 9 percent and Dreyfoos 5 percent
Texture at the surfacefine sandy loam 59 percent, loamy fine sand 36 percent and fine sand 5 percent
Texture about 40 inches downfine sandy loam 86 percent, sandy clay loam 9 percent and fine sand 5 percent
Engineering class about 40 inches downclayey sand (SC) 48 percent, silty clayey sand (SC SM) 38 percent and lean clay (CL) 9 percent
Average clay content about 40 inches down14 percent
Bedrock mapped within 60 inchesNone mapped
Seasonal water table within 60 inches0 percent of the area
Flood prone soils0 percent of the area
High corrosion risk for uncoated steel0 percent of the area

Bedrock is not mapped in the top five feet of Glazier, but the deeper geology is the Ogallala Formation, a Pliocene deposit of sand, silt, clay, gravel and caliche. Seasonal water table and flood prone soils are not mapped, and high steel corrosion risk is not mapped. Those patterns lower concern for wet pits and corrosive soil, but they do not replace checking the actual bore path. Local sand can still cave, so we control fluid and ream in stages.

How do we drill Glazier fine sandy loam?

Glazier’s Springer mapped soils are mostly sandy, so we treat an open hole as temporary and keep the pipe ready. At a US 60 crossing, the bore plan also has to protect the paved route.

  1. Springer loamy fine sand can slough behind the bit, so we use drilling fluid to support the hole and ream in stages before pulling pipe.
  2. At about 40 inches, the USDA survey maps mostly fine sandy loam in Glazier; we track the drill head and record depth and pitch as it advances.
  3. Before a bore near Lipscomb Street, we hydrovac marked utilities because locate paint shows position, not how deep a line sits.
  4. For a Persimmon Creek crossing, we plan the bore below the channel and check during planning whether the crossing falls under Corps jurisdiction.
Bobcat E35 mini excavator lowering a 6 inch PVC sleeve into a bore pit in sandy soil at NE 24th Street in northeast Oklahoma City
Lowering a 6 inch PVC sleeve into a bore pit in sandy soil at NE 24th Street in Oklahoma City.

What does a Glazier bore have to cross near US 60?

US 60 runs 1.2 mapped roadway miles inside Glazier, while Texas State Highway 305 accounts for 0.9 miles and RM 2758 for 0.2 miles. There are no mapped highways within 1.5 miles outside the community boundary. These routes make the crossing location and right of way important to the bore plan. Lipscomb Street is the only named street in the mapped community, with 0.48 miles there; a route along it still needs utility checks before drilling.

CrossingTypeMapped extentWho has a say
US 60US highway1.2 roadway miles insideState highway office
Texas State Highway 305State highway0.9 roadway miles insideState highway office
RM 2758State highway0.2 roadway miles insideState highway office
BNSF RailwayRailroad2.42 track miles insideThe railroad
Persimmon CreekStream1.41 channel miles insideChecked for Corps of Engineers jurisdiction
Clear CreekStream nearby0.6 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

BNSF Railway owns 2.42 track miles inside Glazier on its Panhandle Subdivision, and one street and rail crossing is mapped in the community. A bore near those tracks needs railroad coordination. Persimmon Creek has 1.41 channel miles inside the boundary, with one mapped street crossing of a named stream. Clear Creek is 0.6 miles outside the boundary. Creek conditions can affect depth and planning, while no lakes or ponds are mapped within one mile.

Who approves a Glazier bore in Hemphill County?

Glazier is unincorporated, so it has no city government to approve local streets; county or state responsibility depends on the road. A bore in the right of way of US 60, Texas State Highway 305 or RM 2758 needs a TxDOT utility permit, reviewed by the TxDOT Amarillo District. The utility owner files through TxDOT’s RULIS system, and we prepare the bore plan and profile for its application. On a highway crossing, required cover depends on line type, and the permit may set another depth.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Which utilities serve Glazier in Hemphill County?

For a Glazier bore, we confirm the address’s water provider with the county or local water district before planning the bore. Southwestern Public Service, Greenbelt Electric Cooperative and North Plains Electric Cooperative report electric service in Hemphill County, but that does not establish which company owns a line at a given address. We verify the electric line owner before planning conduit, so a bore beside US 60 is built to the right owner’s requirements.

Line ownerWhat it isSourceSize
Southwestern Public Service, Greenbelt Electric Cooperative and North Plains Electric CooperativeElectric utilities reporting service in Hemphill CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

Housing counts are not published for a place as small as Glazier, so we cannot use a reliable local age profile to assume whether a line is old or new. On the mapped roads, a small community may mean long service runs between properties. June averages 3.4 inches of rain in Hemphill County, while January averages 0.7 inches. Before drilling near the reported electric lines or an address’s water service, we hydrovac marked utilities to see their depth.

Yellow polyethylene gas pipe pulled through a directional bore beside a commercial building
Yellow polyethylene gas pipe pulled through a directional bore beside a commercial building.

Where is Glazier in relation to Perryton?

Glazier is an unincorporated community in Hemphill County, at an elevation of 2,627 feet and covering 1.28 square miles. ZIP code 79014 serves local addresses. Canadian, the county seat, is 9.6 miles southwest; Lipscomb is 14.4 miles north, and Higgins is 15.5 miles northeast. Perryton is 39.4 miles northwest and is the nearest larger city. From our Yukon, Oklahoma main office, Glazier is 170 road miles away, a 3.8 hour drive for crew mobilization.

Places near Glazier

What kinds of bores come up near Glazier Persimmon Creek?

  • Highway crossing: A bore beneath US 60 keeps the paved travel lanes uncut, with the TxDOT permit and cover requirements shaping the route.
  • Water service: A new line near Lipscomb Street needs the address specific water provider confirmed before we choose its connection route.
  • Fiber conduit: A conduit bore along Texas State Highway 305 needs the line owner confirmed and marked utilities exposed before drilling nearby.
  • Creek crossing: A line under Persimmon Creek needs a planned depth below the channel and a jurisdiction check during planning.
  • Rail crossing: Work beneath the BNSF Railway Panhandle Subdivision requires coordination with the railroad that owns the track.
  • Electric conduit: Near RM 2758, we confirm which Hemphill County reporting utility owns the local line before setting conduit specifications.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What do you need to quote a Glazier bore near Lipscomb Street?

A map pin matters in Glazier because a route beside Lipscomb Street may differ from one near US 60 or Persimmon Creek. For a Glazier crossing under BNSF Railway, send us the address or pin, what will go underground, the pipe or conduit size and the footage. A sketch or plans help us see the crossing points and access for the entry and exit pits.

Price follows the actual route. Springer sandy ground and the risk of a hole caving affect drilling and reaming first. The number of utilities to expose matters, as do pavement at US 60, BNSF Railway coordination and a Persimmon Creek crossing. Pit work, excavator time, sand backfill and pipe size also change the scope. Glazier’s 170 road miles from Yukon can affect mobilization, and emergency or high profile work may add planning needs.

Questions people ask about boring in Glazier

Does Trinity take directional boring jobs in Glazier and Hemphill County?

Yes. We take directional boring work in Glazier, with crews of our own and partner drilling contractors Trinity has vetted working from satellite yards. Our main office is in Yukon, Oklahoma, and you deal with Trinity through the bore log, whether the route is near US 60 or Lipscomb Street.

Will a Glazier bore hit rock in the Springer soil?

The USDA soil survey does not map bedrock in Glazier’s top five feet, but that does not rule out deeper rock. The geologic map shows the Pliocene Ogallala Formation, including sand, silt, clay, gravel and caliche. We plan from mapped information, then adjust to conditions encountered along the bore route.

Who approves a Glazier bore under US 60?

For work in the US 60 right of way, the utility owner applies for a TxDOT utility permit through RULIS. The TxDOT Amarillo District reviews it. The utility owner submits the application, while we develop the bore plan and profile. The permit and line type determine the required cover beneath the highway.

What project details do we need to confirm before planning a Glazier bore under BNSF Railway?

A bore under the BNSF Railway track needs an agreement with the railroad owner. Glazier has 2.42 track miles of BNSF Railway on the Panhandle Subdivision, so the crossing route needs railroad coordination. If highway right of way is also involved, TxDOT asks for a copy of the agreement.

Can a line be bored under Persimmon Creek in Glazier?

A bore can be planned under Persimmon Creek, which has 1.41 channel miles inside the Glazier boundary. We plan depth to pass beneath the channel and check during planning whether the crossing is within U.S. Army Corps of Engineers jurisdiction. The actual route and ground conditions guide the plan.

Who owns the electric lines in Glazier, Hemphill County?

Southwestern Public Service, Greenbelt Electric Cooperative and North Plains Electric Cooperative report electric service in Hemphill County, but the owner at a specific Glazier address must be confirmed. Before conduit near US 60 is planned, we verify the line owner and its conduit requirements rather than assuming a countywide provider serves every property.

How much 811 notice does a Glazier bore near Lipscomb Street need?

The Texas811 locate request must be made at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before it. If work slips more than 14 days past the original notice, make a new request. Refresh marks through Texas811 if they move or wear off.

How far is Glazier from Trinity’s Yukon office, and does Perryton change the job?

From our Yukon, Oklahoma main office, Glazier is 170 road miles and a 3.8 hour drive, which shapes our travel planning. Perryton is 39.4 miles northwest of Glazier, but it does not change the bore design. Distance from Yukon can affect crew mobilization, while Springer soil, access and the specific crossing set the field plan.

What route, bore length and site conditions affect the cost of a directional bore under US 60 in Glazier?

The route, pipe or conduit size, footage and Springer soil conditions all matter. A US 60 pavement crossing, exposed utilities, BNSF Railway or Persimmon Creek coordination, pits and sand backfill can add work. Mobilization from Yukon also matters because Glazier is 170 road miles from the main office.

Where the Glazier facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Glazier

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Glazier, Texas

Type the address of your job in Glazier. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Glazier

All counties: Texas county list.