Directional Boring Contractors in Jeff Davis County, TX
Trinity Boring Solutions is a directional boring contractor serving Jeff Davis County, Texas, installing water, sewer, gas, electric and fiber lines without an open trench in Fort Davis and Valentine. The Trinity main office in Yukon, Oklahoma is about 599 road miles from Fort Davis, the county seat. The usual crossings in Jeff Davis County are Interstate 10 and US 90, Limpia Creek and Union Pacific track. Call (405) 409-7423 any time.
Free Bore Planner
Plan Your Bore in Jeff Davis County, Texas
Type the address of your job in Jeff Davis County. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
What Should You Know Before Boring in Jeff Davis County?
Jeff Davis County covers 2,265 square miles, has about 1,778 residents and sits in the TxDOT El Paso District.
| County seat | Fort Davis |
|---|---|
| Population | 1,778 (2024 Census estimate), down 11.0% since 2020 |
| Land area | 2,265 square miles |
| Largest cities and towns | Valentine (63) |
| TxDOT district | TxDOT El Paso District |
| 811 center | Texas811 (call 811), two working days of notice |
| Electric utilities | AEP Texas North and Rio Grande Electric Cooperative |
| Interstate and US highways | Interstate 10 and US 90 |
| State Highways | 17, 118 and 166 |
| Creeks and other streams | Limpia Creek, Cienega Creek, Musquiz Creek, Wild Horse Creek, North Fork Alamito Creek, Cherry Creek, Liupia Creek and Barillos Creek |
| Railroads | Union Pacific, about 30 main line miles |
| Average precipitation | 14.2 inches a year (1991 to 2020) |
| Road distance from Trinity main office | About 599 miles from Yukon, Oklahoma to Fort Davis |
| Trinity insurance | General liability of $1,000,000 per occurrence and $4,000,000 aggregate, plus $5,000,000 excess liability |
Sources: Census Bureau (2024 population, 2025 building permits, TIGER/Line roads and water), EIA Form 861 (2025), NOAA 1991 to 2020 precipitation, federal rail network map, TxDOT districts, OpenStreetMap routing. Checked November 2026.
What Does a Bore Have to Cross in Jeff Davis County?
A bore in Jeff Davis County most often has to cross a highway such as Interstate 10, US 90 or State Highway 118, a stream such as Limpia Creek or Cienega Creek and Union Pacific track. State Highways 17, 118 and 166 also run through the county. The Census map names 25 larger streams in Jeff Davis County, led by Limpia Creek, Cienega Creek, Musquiz Creek, Wild Horse Creek, North Fork Alamito Creek and Cherry Creek. The rest are Liupia Creek, Barillos Creek, Van Horn Creek, Tally Slough, South Fork Alamito Creek, Dutchman Creek, Sand Creek, Moore Slough, Kokernot Creek, Olds Creek, Elbow Creek, Horse Thief Creek, Black Creek, Chihuahya Creek, Middle Fork Cienega Creek, Ninemile Draw, North Fork, South Fork Cienega Creek and Chihuahua Creek. The federal rail map shows about 30 miles of main line track in Jeff Davis County, owned by Union Pacific.

What Is the Ground Like for Directional Boring in Jeff Davis County?
Rock is the main thing to plan for in Jeff Davis County: the federal soil survey records bedrock within five feet of the surface on about 45 percent of the county, most of it hard rock. Depth to rock in Jeff Davis County is confirmed by potholing before the rig is set, and rock tooling is loaded when the path cannot avoid it. July is the wettest month in Jeff Davis County at 2.6 inches on average and February the driest at 0.4. Jeff Davis County averages 14.2 inches of precipitation a year, so the ground is usually dry at bore depth.
- Most common soils: Brewster (17%), Musquiz (6%) and Liv (5%).
- Surface texture: most often very gravelly loam (15%) or gravelly clay loam (11%).
- Bedrock within 5 feet: about 45% of the county. Most of it is hard rock. Rock outcrop is mapped on about 13%.
- Caliche within 5 feet: about 4% of the county.
- Clay rich layer (35% clay or more) in the top 5 feet: about 26% of the county.
- Gravelly, cobbly or stony surface soil: about 44% of the county.
Source: USDA Natural Resources Conservation Service, Soil Survey Geographic Database, Jeff Davis County, Texas (survey area TX243, version 27, September 3, 2026), through Web Soil Survey. Percentages are shares of mapped county area.
Who Permits a Bore in Jeff Davis County?
The TxDOT El Paso District permits bores under state highways in Jeff Davis County, the Jeff Davis County Commissioners Court handles county roads, and Valentine handles its own streets.
- State highways. Interstate 10, US 90, the other numbered state routes and the farm to market roads in Jeff Davis County are on the state system. The utility owner files a TxDOT utility permit in RULIS.
- Texas811 locates. Texas811 needs at least two working days of notice before digging (Texas811 FAQ; Texas Utilities Code, Section 251.151).
- Railroads. A bore under Union Pacific track in Jeff Davis County needs a crossing agreement from the railroad that owns it, which sets the casing, depth and flagging.
- Water crossings. A bore under Limpia Creek is checked for U.S. Army Corps of Engineers jurisdiction while the path is planned.
Statewide rules are on the Directional Boring Texas page, and Trinity supplies the bore plan and profile for the permit package.
Which Electric Utilities Serve Jeff Davis County?
AEP Texas North and Rio Grande Electric Cooperative serve Jeff Davis County, according to 2025 filings with the U.S. Energy Information Administration. AEP Texas North is an investor owned utility; Rio Grande Electric Cooperative is a member owned cooperative. Conduit bored in Jeff Davis County is built to the standard of whichever of them owns the line. More on electric line boring for electric cooperatives.
Is Jeff Davis County Growing?
The population of Jeff Davis County went from 1,998 in 2020 to 1,778 in 2024, a loss of 11.0 percent. In Jeff Davis County the usual job is a replacement line, a rural water or fiber extension, or a road crossing for an existing utility.
Which Cities and Towns in Jeff Davis County Does Trinity Serve?
Trinity takes directional boring work in Valentine, the only incorporated place in Jeff Davis County with about 63 residents, and at sites outside the city limits.
| City or town | 2024 population |
|---|---|
| Valentine | 63 |
Source: U.S. Census Bureau 2024 estimates, counting only the part of each city inside Jeff Davis County.
Jeff Davis County borders Brewster County, Culberson County, Hudspeth County, Pecos County, Presidio County and Reeves County; every county is on the Directional Boring in All 254 Texas Counties page. The neighboring county seats are Alpine (Brewster), Van Horn (Culberson), Sierra Blanca (Hudspeth), Fort Stockton (Pecos), Marfa (Presidio) and Pecos (Reeves).
Which Directional Boring Services Are Available in Jeff Davis County?
Every Trinity service is available in Jeff Davis County: horizontal directional drilling from 3/4 inch service lines to 48 inch casing, auger boring, hydrovac potholing, trenching and 24 hour emergency response, all listed under Underground Utility and Boring Services.
- Road, highway, railroad, creek and river bore crossings, including Interstate 10, US 90 and Limpia Creek
- Bores under Union Pacific track, built to the railroad boring requirements of the owner
- Drinkable water line boring and sewer force mains in Valentine and on rural water systems
- Underground conduit in AEP Texas North and Rio Grande Electric Cooperative territory, see electric line boring
- Fiber optic boring for ISPs and broadband builders along Interstate 10
- Municipal boring services for Valentine
The free Bore Planner sizes a Jeff Davis County job before you call.
Jeff Davis County Directional Boring FAQs: What Do Customers Ask?
Does Trinity Boring Solutions work in Fort Davis, Texas?
Yes. Trinity Boring Solutions takes work in Fort Davis and Valentine and the rural parts of Jeff Davis County. Trinity works in Texas with its own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted.
Who approves a bore under Interstate 10 in Jeff Davis County?
The TxDOT El Paso District. The utility owner files the permit in the TxDOT RULIS system. County roads go through the Jeff Davis County Commissioners Court and city streets through the city.
Is there rock in Jeff Davis County?
Yes, in places. The federal soil survey records bedrock within five feet of the surface on about 45 percent of Jeff Davis County, most of it hard rock. Potholing confirms it on the actual bore path.
Can a line be bored under Limpia Creek in Jeff Davis County?
Yes. A drill is steered below the bed of Limpia Creek from a pit on each bank and the pipe is pulled back through, so the channel is not opened. Federal jurisdiction over the crossing is checked first.
Which railroads have track in Jeff Davis County?
Union Pacific, with about 30 miles of main line track on the federal rail map. Each requires its own crossing agreement before a bore goes under the rails.
Is Trinity insured for work in Jeff Davis County?
Yes. Trinity Boring Solutions carries general liability of $1,000,000 per occurrence and $4,000,000 aggregate, plus $5,000,000 excess liability. Ask for a certificate with the quote.
How much does directional boring cost in Jeff Davis County?
A general range comes from the footage and the pipe size. Depth, the crossings and the ground set the number, and rock is a factor on many Jeff Davis County jobs.
How Do You Get a Bore Quote in Jeff Davis County?
Call (405) 409-7423 any time or send the address in Jeff Davis County, the utility, the length and what it crosses. Trinity has bored since 1965 and is family owned.