trinityboringsolutions.com

Fort Davis Texas Directional Boring: Musquiz Soil, Chihuahya Creek And Highway 118

Quick Answer: Can a line pass beneath Chihuahya Creek or a road without cutting pavement? Yes, we do directional boring, also called horizontal directional drilling (HDD), for crossings like Texas State Highway 118. Fort Davis is 599 road miles from our Yukon, Oklahoma main office, with Texas State Highway 17 also running through the community. The USDA soil survey maps Musquiz clay loam and very gravelly ground here, so we plan for both sticky clay and loose material around a bore.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Fort Davis bores at a glance

  • County seat of Jeff Davis County, Texas. Population 1,024 (2020 Census count).
  • Road distance from our Yukon, Oklahoma main office: 599 miles, about 11.7 hours of driving.
  • Ground: Musquiz soil is mapped on 27 percent of the area, with very gravelly loam about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 25 percent of the area.
  • Highways inside the boundary: Texas State Highway 118 and Texas State Highway 17. State permit office: TxDOT El Paso District.
  • Railroad track inside the boundary: none mapped.
  • Named streams inside the boundary: Chihuahya Creek, Liupia Creek, Cienega Creek and Chihuahua Creek.
  • Public water: Fort Davis Water Supply Corporation, groundwater wells.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who can I call for boring under Texas State Highway 118 in Fort Davis?

Can a line pass beneath Chihuahya Creek or a road without cutting pavement? Yes. We take directional boring work in Fort Davis, an unincorporated community in Jeff Davis County with a 2020 Census population of 1,024. We install water, sewer, gas, electric conduit and fiber, including service routes along Front Street or crossings near Texas State Highway 118 where an open cut would disrupt the surface.

Our main office is in Yukon, Oklahoma, and Fort Davis work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. For a short service route off State Street, we handle sizes from 3/4 inch service lines up to 48 inch casing and bore lengths from 10 feet to 5,000 feet. Our family business began in 1965, and we have done directional boring since 1982, planning any Texas State Highway 118 crossing around project requirements.

Trinity Boring Solutions branded compact directional drilling unit positioned beside a tree on a red dirt jobsite
Our compact directional drill set up beside a tree on a tight site. Photos on this page are from our jobs in Oklahoma and Texas.

How does Musquiz soil affect boring in Fort Davis?

The USDA soil survey maps Musquiz clay loam, 0 to 3 percent slopes, across 27 percent of Fort Davis. At about 40 inches below the surface, very gravelly loam is mapped under 31 percent of the area, clay under 27 percent, and bedrock under 25 percent. The survey reports average clay content of 28 percent at that depth and only 2 percent sandy area. Musquiz, Boracho, Sanmoss, and Bigetty are mapped soil patterns we use for context, not substitutes for test borings. Clay can cling to the reamer, while gravel can make the drill head wander, so the route and drilling approach matter.

USDA soil survey, inside the Fort Davis mapped community boundaryWhat is mapped
Soil series mappedMusquiz 27 percent, Boracho 16 percent, Sanmoss 15 percent, Bigetty 11 percent and Mainstay 11 percent
Texture at the surfacevery gravelly loam 31 percent, clay loam 27 percent and silt loam 11 percent
Texture about 40 inches downvery gravelly loam 31 percent, clay 27 percent and bedrock 25 percent
Engineering class about 40 inches downlean clay (CL) 38 percent, clayey gravel (GC) 31 percent and clayey sand (SC) 5 percent
Average clay content about 40 inches down28 percent
Bedrock mapped within 60 inches25 percent of the area (14 percent hard rock, 11 percent weathered rock)
Seasonal water table within 60 inches0 percent of the area
Flood prone soils13 percent of the area
High corrosion risk for uncoated steel37 percent of the area

The USDA survey maps bedrock within 60 inches across 25 percent of Fort Davis, including 14 percent hard bedrock and 11 percent weathered bedrock. A mapped typical bedrock depth of 10 inches means a route may meet rock early, though the survey is not a site test. Seasonal water table is not mapped within 60 inches, but flood prone soils cover 13 percent, including ground near Chihuahya Creek. The mapped younger volcanic rocks of the Davis Mountains area are Rupelian and include basalt, rhyolite and trachyte. Steel corrosion risk is mapped across 37 percent, so casing and tracer wire materials need attention.

How is a bore run through very gravelly loam in Fort Davis?

The USDA survey maps very gravelly loam across 31 percent of Fort Davis, alongside Musquiz clay loam. We set the bore path to the site, then adjust the drilling approach as the ground and nearby crossings require.

  1. In Musquiz clay loam, we manage sticky cuttings with thinner drilling fluid and staged reaming, then pull the pipe while the hole is ready.
  2. Where the USDA survey maps very gravelly loam, we use staged reaming to help keep the hole open and have the pipe ready for the final pass.
  3. With bedrock mapped within 60 inches in parts of Fort Davis, we track depth and pitch as the drill moves through soil and rock contacts.
  4. Near Chihuahya Creek, we plan the bore below the channel and check jurisdiction during planning; pits stay on the banks rather than cutting across them.
6 inch PVC sleeve coming out of the bore pit wall in red sandy soil with the Trinity water trailer behind, northeast Oklahoma City
A 6 inch PVC sleeve coming out of the bore pit wall in red sandy soil in northeast Oklahoma City.

What does a bore have to cross near Chihuahya Creek in Fort Davis?

Texas State Highway 118 has 5.7 mapped roadway miles inside the Fort Davis community boundary, and Texas State Highway 17 has 4.4. Texas State Highway 166 runs along or touches the boundary. A bore route may also run beneath Front Street, 1.91 miles in the community, Cemetery Road, 1.75 miles, or State Street, 1.46 miles. We plan the entry and exit pits off the traveled surface and check the route against marked utilities before drilling.

CrossingTypeMapped extentWho has a say
Texas State Highway 118State highway5.7 roadway miles insideState highway office
Texas State Highway 17State highway4.4 roadway miles insideState highway office
Texas State Highway 166Highway nearbyRuns along or touches the city limitsState highway office
Chihuahya CreekStream4.45 channel miles insideChecked for Corps of Engineers jurisdiction
Liupia CreekStream2.05 channel miles insideChecked for Corps of Engineers jurisdiction
Cienega CreekStream1.78 channel miles insideChecked for Corps of Engineers jurisdiction
Chihuahua CreekStream0.89 channel miles insideChecked for Corps of Engineers jurisdiction
Limpia CreekStream nearby0.4 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

Public records map no railroad inside Fort Davis or within one mile outside the community boundary, so no track crossing is shown in that inventory. Chihuahya Creek has 4.45 channel miles inside the community, and public records map 13 street crossings of named streams. Liupia Creek, Cienega Creek and Chihuahua Creek also run through the area. We find no lakes or ponds mapped within one mile in Fort Davis, while Chihuahya Creek crossings still call for site specific planning. A creek route needs depth planning, and its jurisdiction is checked during planning.

Who has to sign off on a bore in Jeff Davis County near Fort Davis?

Fort Davis has no city government, so responsibility for State Street, Cemetery Road and other streets rests with the county or state, depending on the road. Work in the right of way of Texas State Highway 118, Texas State Highway 17 or Texas State Highway 166 needs a TxDOT utility permit. The TxDOT El Paso District reviews it, and the utility owner files through RULIS; we prepare the bore plan and profile and work under that owner’s permit. TxDOT requires boring or tunneling under existing highway pavement. For Chihuahya Creek, we check U.S. Army Corps of Engineers jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Which utilities are near Fort Davis Water Supply Corporation lines?

Fort Davis Water Supply Corporation uses groundwater wells and reports 867 service connections serving 986 people. Its lines may be part of a route near Front Street or Texas State Highway 118, so we identify the line owner before planning a crossing. AEP Texas North and Rio Grande Electric Cooperative report electric service in Jeff Davis County; the specific owner at a Fort Davis address must be confirmed before an electric conduit bore.

Line ownerWhat it isSourceSize
Fort Davis Water Supply CorporationPublic water systemGroundwater wells867 connections, 986 people served
AEP Texas North and Rio Grande Electric CooperativeElectric utilities reporting service in Jeff Davis CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Fort Davis’s median housing year at 2000: 17 percent of housing units were built before 1960, 33 percent from 1960 to 1999, and 50 percent in 2000 or later. Those figures do not date buried lines, so a replacement bore near Cemetery Road still needs utility checks. We hydrovac pothole each marked utility on the path before the drill gets close. For example, a line proposed under Cemetery Road is exposed first because paint shows position, not depth.

Yellow polyethylene gas pipe pulled through a directional bore beside a commercial building
Yellow polyethylene gas pipe pulled through a directional bore beside a commercial building.

How far is Fort Davis from Marfa and the Yukon office?

Fort Davis is in Jeff Davis County, covers 10.8 square miles and sits at an elevation of 4,960 feet. ZIP code 79734 serves the community. Marfa is 20.1 miles southwest, and Alpine is 20.2 miles southeast; Alpine is the nearest larger city. Fort Davis is also the county seat. From our Yukon, Oklahoma main office, the drive is 599 road miles and 11.7 hours, a distance that affects crew mobilization for work near Texas State Highway 118.

Places near Fort Davis

What boring work comes up near State Street in Fort Davis?

  • Highway crossing: A bore beneath Texas State Highway 118 avoids cutting the existing pavement, with entry and exit pits set outside the travel lanes.
  • Water service: A new or replacement line near Fort Davis Water Supply Corporation routes can connect to a property without an open cut across Front Street.
  • Fiber conduit: A conduit run along State Street can pass below the road surface, with marked utilities exposed before drilling near them.
  • Creek crossing: A line under Chihuahya Creek needs a planned depth and a check for U.S. Army Corps of Engineers jurisdiction.
  • Street replacement: A replacement service near Cemetery Road needs potholing where the route meets existing buried lines, since their depth is not shown by paint.
  • Acreage service: A longer route toward Texas State Highway 166 can be planned around gravelly soil, utility crossings and the available work area.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What do you need to quote a bore near Front Street in Fort Davis?

Please send a map pin or address near Front Street first so we can review the proposed boring route. The exact location matters near Front Street and Chihuahya Creek because a change in the route can change the road, utility or creek crossings. Tell us what will go in the ground, its pipe or conduit size and the footage. A sketch or plans help us review the proposed path.

The price depends on the job details. Musquiz clay loam and very gravelly ground affect drilling and reaming; crossings of Texas State Highway 118 or Chihuahya Creek can add planning and exposure work. We also consider line size, bore length, concrete or pavement, pit and excavator needs, sand backfill, and how many utilities must be exposed. Mobilizing from Yukon is a factor at 599 road miles from Fort Davis, as are high profile or emergency conditions.

Questions people ask about boring in Fort Davis

Does Trinity Boring Solutions take jobs in Fort Davis and Jeff Davis County, and who staffs them?

Yes. We take directional boring work in Fort Davis and across Texas, coordinating highway permit questions with the TxDOT El Paso District. The work uses our own crews or crews at satellite yards run by drilling contractors we have personally vetted. Our main office is in Yukon, Oklahoma, and we stay involved from the first call through the bore log, including a route near Texas State Highway 118.

Who owns electric lines in Jeff Davis County near Fort Davis, and who confirms conduit specs?

AEP Texas North and Rio Grande Electric Cooperative report electric service in Jeff Davis County, but that does not identify the provider at every Fort Davis address. We confirm the line owner for the proposed route before planning an electric conduit bore. The owner can confirm the conduit requirements for a crossing near Front Street or Texas State Highway 17.

Who is responsible for State Street in Fort Davis, and can a bore avoid cutting it?

Fort Davis is an unincorporated community with no city government, so street responsibility belongs to the county or state, depending on the road. A directional bore can pass below State Street without an open cut, subject to route conditions and any applicable right of way permit. We check the road authority before the work is planned.

Do older homes near Cemetery Road in Fort Davis mean old buried lines?

Not necessarily. The American Community Survey 2019 to 2023 estimates say 17 percent of Fort Davis housing units were built before 1960, but that does not establish the age or location of buried lines. A replacement bore near Cemetery Road needs marked utilities exposed by hydrovac before drilling close to them.

Can groundwater or flood prone soil affect bore pits near Chihuahya Creek in Fort Davis?

The USDA survey does not map a seasonal water table within 60 inches, but it maps flood prone soils across 13 percent of Fort Davis. Near Chihuahya Creek, we plan the bore depth and pit locations for the channel and check jurisdiction during planning. If a pit encounters water, pumping and a smaller pit may be needed.

Does Musquiz soil in Fort Davis corrode steel, and what pipe should I use?

The USDA survey maps high steel corrosion risk across 37 percent of Fort Davis, while Musquiz clay loam covers 27 percent. For Texas State Highway 17 crossings, we leave steel casing or tracer wire coating choices to the line owner. HDPE is not subject to that soil corrosion concern in Fort Davis, and we consider mapped Musquiz soils during route planning. The best material depends on the line and the route near features such as State Street.

Does Trinity serve Marfa and rural sites outside Fort Davis?

Yes. We take work across Texas, including jobs outside the Fort Davis community boundary. Marfa is 20.1 miles southwest, and Alpine is 20.2 miles southeast, so a project near either place can be discussed along with a Fort Davis route. Send the address or map pin so we can review the specific site.

How much notice does Texas811 need for a Fort Davis bore near Front Street, and what if marks move?

Count back at least two working days from the planned start near Front Street, excluding Saturdays, Sundays and legal holidays. The request must be made no earlier than 14 days before excavation. If the start slips more than 14 days past the original notice, make a new request; worn or moved marks must be refreshed through Texas811 before work continues.

What affects the cost of a Fort Davis bore beneath Texas State Highway 118?

The route, line size and length all matter, as do soil, exposed utilities, pavement, pits and equipment needs. Very gravelly loam and Musquiz clay loam can affect the drilling plan, while a Texas State Highway 118 crossing brings right of way planning. Mobilization also matters because Fort Davis is 599 road miles from our Yukon office.

Where the Fort Davis facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Fort Davis

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Fort Davis, Texas

Type the address of your job in Fort Davis. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Fort Davis

All counties: Texas county list.