trinityboringsolutions.com

Edinburg Texas Directional Boring: Hidalgo Soil, Edinburg Main Canal and Rio Valley Tracks

Quick Answer: Edinburg is an incorporated county seat, so the city owns its city streets; directional boring, or horizontal directional drilling (HDD), can carry lines beneath the Edinburg Main Canal and routes such as US 281. The Yukon, Oklahoma main office is 692 road miles from Closner Boulevard, which affects mobilization. USDA maps show Hidalgo sandy clay loam at the surface and clay loam at about 40 inches, ground that can hold a bore open but may cling to tooling and pipe. We plan the hole and pipe pull for Hidalgo soil conditions.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Edinburg bores at a glance

  • County seat of Hidalgo County, Texas. Population 108,733 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 692 miles, about 13.5 hours of driving.
  • Ground: Hidalgo soil is mapped on 78 percent of the area, with clay loam about 40 inches down.
  • Rock: no bedrock is mapped in the top 60 inches.
  • Highways inside the boundary: Interstate 69C, US 281, US 281 Business, Texas State Highway 107 and FM 2812. State permit office: TxDOT Pharr District.
  • Railroad track inside the boundary: Rio Valley Switching Company, with 20 mapped street and rail crossings.
  • Named streams inside the boundary: Edinburg Main Canal, Mc Allen Mountain Irrigation Canal, Edinburg East Main Canal and Santa Cruz Canal.
  • Public water: City of Edinburg, surface water.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who can I call for directional boring near the Edinburg Main Canal?

The Census Bureau Vintage 2024 estimate puts Edinburg at 108,733 people in Hidalgo County. We install water and sewer lines along streets such as Closner Boulevard, and gas, electric conduit or fiber routes where a service must pass beneath US 281 or the Edinburg Main Canal. The route and line type shape the bore plan for each Edinburg job.

Our main office is in Yukon, Oklahoma, and Edinburg work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Since 1982, four decades of directional boring have taught us to match reaming and pipe pulls to ground such as Hidalgo sandy clay loam, where sticky cuttings can gather on tooling. The family business began in 1965, and Edinburg Main Canal crossings bring their own route and access questions.

Directional drill rig and crew working on a street beside a brick commercial building
Our drill and crew set up on a street beside a brick commercial building. Photos on this page are from our jobs in Oklahoma and Texas.

What is Hidalgo soil like to bore in Edinburg?

The USDA soil survey maps Hidalgo soil across much of Edinburg: Hidalgo series covers 78% of the mapped area. At the surface, sandy clay loam accounts for 69%, while fine sandy loam accounts for 21%. About 40 inches down, clay loam is mapped across 83% of the area, and the average clay content at that depth is 29%. For Edinburg planning, we treat mapped patterns as references, not test borings for directional boring work. For a bore near Closner Boulevard, clay loam can help the hole stay open, but sticky cuttings may collect on the reamer and grip pipe.

USDA soil survey, inside the Edinburg city limitsWhat is mapped
Soil series mappedHidalgo 78 percent, Brennan 7 percent and Raymondville 5 percent
Texture at the surfacesandy clay loam 69 percent, fine sandy loam 21 percent and clay loam 5 percent
Texture about 40 inches downclay loam 83 percent and sandy clay loam 13 percent
Engineering class about 40 inches downlean clay (CL) 86 percent and clayey sand (SC) 11 percent
Average clay content about 40 inches down29 percent
Bedrock mapped within 60 inchesNone mapped
Seasonal water table within 60 inches3 percent of the area
Flood prone soils0 percent of the area
High corrosion risk for uncoated steel9 percent of the area
Mapped as urban land (disturbed fill)1 percent of the area

The Edinburg soil survey maps no bedrock in the top five feet, though deeper rock is still possible. A seasonal water table is mapped within 60 inches across 3% of the area, so pits near Edinburg Main Canal may need pumping. Flood prone soils are not mapped in the city. High steel corrosion risk covers 9% of the mapped area, a concern for steel casing or tracer wire that the line owner should consider. The geologic map shows Pleistocene Lissie Formation and Chibanian Alluvium, including clay, silt and sand, so conditions can vary along a route.

How do crews bore Edinburg clay loam without cutting streets?

Edinburg’s clay loam at about 40 inches calls for a controlled hole and a pipe pull planned around sticky cuttings. At a Closner Boulevard route, we track the drill head and keep the work pits off the pavement.

  1. In Edinburg clay loam, we adjust drilling fluid and ream in stages so sticky cuttings do not build up on the tooling.
  2. Where the Hidalgo soil is sandy clay loam, we prepare the pipe before the final ream and keep the pull coordinated with the open hole.
  3. Near the 3% of Edinburg mapped area with a seasonal water table within 60 inches, we keep pits small and pump standing water as needed.
  4. Along Edinburg streets such as Closner Boulevard, we hydrovac expose each marked utility on the bore path before the drill approaches it.
Reel of 4 inch HDPE conduit on the exit side of a 385 foot directional bore under creeks and wetland in Guthrie, Oklahoma
A reel of 4 inch HDPE conduit on the exit side of a 385 foot bore under creeks and wetland in Guthrie, Oklahoma.

What does a bore have to cross in Edinburg near Rio Valley Switching Company?

Interstate 69C, US 281 and US 281 Business run through Edinburg, along with Texas State Highway 107 and several farm to market roads. Closner Boulevard is the longest named street in the city, followed by University Drive and McColl Road. Jackson Road and Monte Cristo Road are other route options. A bore beneath existing highway pavement avoids cutting through the travel surface, while the specific highway and street location determines the route and permit path.

CrossingTypeMapped extentWho has a say
Interstate 69CInterstate22.1 roadway miles insideState highway office
US 281US highway29.1 roadway miles insideState highway office
US 281 BusinessUS highway15.3 roadway miles insideState highway office
Texas State Highway 107State highway13.6 roadway miles insideState highway office
FM 2812State highway1.6 roadway miles insideState highway office
Texas State Highway 336State highway1.5 roadway miles insideState highway office
FM 2061State highway3 roadway miles insideState highway office
FM 490State highway1 roadway miles insideState highway office
FM 1925State highway0.5 roadway miles insideState highway office
Rio Valley Switching CompanyRailroad7.46 track miles insideThe railroad
Edinburg Main CanalStream11.93 channel miles insideChecked for Corps of Engineers jurisdiction
Mc Allen Mountain Irrigation CanalStream1.35 channel miles insideChecked for Corps of Engineers jurisdiction
Edinburg East Main CanalStream1.16 channel miles insideChecked for Corps of Engineers jurisdiction
Santa Cruz CanalStream1.13 channel miles insideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

Rio Valley Switching Company has 7.46 track miles in Edinburg, and public records map 20 street and rail crossings. A rail bore needs an agreement with the track owner before work proceeds. The Edinburg Main Canal has 11.93 channel miles in the city; Edinburg East Main Canal and Santa Cruz Canal are also mapped. Public records show 39 street crossings of named streams, so canal and drainage routes need to be checked during planning. Lake Jones is inside the city.

Who approves an Edinburg bore near Hidalgo County roads?

Edinburg is incorporated, so its city streets belong to the city; the named highways follow a separate state process. For work in the right of way of Interstate 69C, US 281 or a state highway, the line owner files the utility application in TxDOT’s RULIS system. We prepare the bore plan and profile for that filing, and the TxDOT Pharr District reviews it. TxDOT rules set minimum cover depths by line type, with the permit able to require a different depth. A crossing under Rio Valley Switching Company track also needs that railroad’s agreement. Canal crossings are checked for U.S. Army Corps of Engineers jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

What is already in the ground near the City of Edinburg water system?

The City of Edinburg public water system uses surface water and lists 30,350 service connections serving 85,224 people. Before a bore near Closner Boulevard, we use hydrovac potholing to expose marked lines on the path; paint shows position, not depth. AEP Texas Central, Oncor Electric Delivery Company and Magic Valley Electric Cooperative report electric service in Hidalgo County. We confirm the line owner for the specific location before planning an electric conduit bore.

Line ownerWhat it isSourceSize
City of EdinburgPublic water systemSurface water30,350 connections, 85,224 people served
AEP Texas Central, Oncor Electric Delivery Company and Magic Valley Electric CooperativeElectric utilities reporting service in Hidalgo CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

American Community Survey 2019 to 2023 five year estimates put Edinburg’s median housing year at 2003. The survey estimates 3% of housing was built before 1960, 38% from 1960 to 1999 and 59% in 2000 or later. That mix can mean work on older lines as well as new services. Near Jackson Road, we expose marked utilities with hydrovac before the drill approaches a crossing.

Hydrovac truck and boring equipment staged beside an airport taxiway for utility daylighting in Oklahoma City
Our hydrovac truck and boring equipment beside an airport taxiway in Oklahoma City, set up to expose a utility crossing.

Do you cover Edinburg and nearby César Chávez?

Edinburg is the Hidalgo County seat, with an elevation of 95 feet and a land area of 46.59 square miles. We use Edinburg’s ZIP codes 78542, 78541 and 78539 to frame underground work planning. César Chávez is 2.6 miles east, Doolittle is 3.7 miles northeast, and Murillo is 4.2 miles southeast. Lopezville lies 5.0 miles south and Muniz is 5.8 miles southeast. From the Yukon, Oklahoma yard, Edinburg is 692 road miles away, a 13.5 hour drive. That distance is part of planning mobilization for a bore near Interstate 69C or the Edinburg Main Canal.

Places near Edinburg

Which jobs call for a bore in Edinburg near Closner Boulevard?

  • Highway crossing: A route beneath Interstate 69C can keep a new water or fiber line out of the highway pavement.
  • Water service: A connection near the City of Edinburg system can pass beneath a street without an open cut across the pavement.
  • Fiber conduit: A route along University Drive can place conduit beneath street access points while keeping the surface intact.
  • Canal crossing: A bore under Edinburg Main Canal can carry a utility beneath the channel, with jurisdiction checked during planning.
  • Rail crossing: A route beneath Rio Valley Switching Company track requires the railroad’s agreement before the crossing is built.
  • Airport service: A utility route near South Texas International at Edinburg Airport needs a path planned around the site and marked lines.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What drives the price of a bore in Edinburg near Jackson Road?

A map pin matters near Jackson Road because the exact route can put a bore beside pavement, marked utilities or a drainage crossing. For an Edinburg quote, send the address or pin, what will go underground, the pipe or conduit size and the footage. A sketch or plans help us check the route and access.

A short Edinburg service route in Hidalgo sandy clay loam, clear of utilities and pavement, is simpler to plan. The scope gets harder with longer footage, larger pipe, sticky clay, or exposed utilities near Jackson Road. A crossing under Interstate 69C or Rio Valley Switching Company track adds route and permit work. Concrete, creek or drainage crossings, pits, excavator time and sand backfill also affect the plan. Mobilization reflects the 692 road miles from Yukon, and high profile or emergency work can add planning needs.

Questions people ask about boring in Edinburg

Does Trinity take directional boring jobs in Hidalgo County around Edinburg, and who staffs them?

Yes. We take directional boring work in Edinburg and across Texas, using each location to guide project planning. Our crews or crews from satellite yards run by drilling contractors we have vetted handle the site work, while customers deal with Trinity from the first call through the bore log. The route near Edinburg Main Canal helps define the job scope.

Will a bore in Edinburg hit rock below the Hidalgo soil?

The soil survey maps no bedrock in the top five feet of Edinburg, but that does not rule out rock deeper down. The geologic map shows Pleistocene Lissie Formation and Chibanian Alluvium, with clay, silt and sand among the mapped materials. A specific route near US 281 still needs its ground conditions considered.

Who approves a utility bore under Interstate 69C in Edinburg?

For Interstate 69C right of way, the utility line owner files the application through TxDOT’s RULIS system, not the drilling contractor. The TxDOT Pharr District reviews the request. We provide the bore plan and profile for the owner’s filing, and the permit sets the work conditions for that Edinburg crossing.

What does an Edinburg bore under Rio Valley Switching Company track require?

A crossing beneath Rio Valley Switching Company track needs an agreement from the railroad that owns it. That agreement addresses crossing requirements such as casing, depth and flagging. Public records map 7.46 track miles in Edinburg, so the proposed route and track location matter when developing the bore plan.

Can a line be bored under Edinburg Main Canal in Edinburg?

A line can be planned to pass beneath the Edinburg Main Canal rather than cutting across the channel. The canal has 11.93 channel miles in the city, and the crossing is checked for U.S. Army Corps of Engineers jurisdiction during planning. The location also affects entry and exit pit placement.

Who runs Edinburg’s public water system, and where does its water come from for underground work planning?

The City of Edinburg owns and runs the public water system, which uses surface water. Its records list 30,350 service connections serving 85,224 people. For a bore near Closner Boulevard, the existing marked lines still need to be exposed and checked before drilling near them.

How far is Edinburg from Trinity’s Yukon office, and does it affect a bore?

Edinburg is 692 road miles from the Yukon, Oklahoma main office, about a 13.5 hour drive. That distance affects mobilization for work near Interstate 69C or Edinburg Main Canal. The route, equipment needs and job schedule all inform how a crew is dispatched.

How much Texas811 notice does a bore near Edinburg Closner Boulevard need?

For a bore near Closner Boulevard, Texas law requires a locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days ahead. When an Edinburg start slips more than 14 days past the original notice, we submit a new request before work continues. For planned work in Edinburg, we refresh worn or moved marks through Texas811 before continuing, keeping the marked route current.

What affects the cost of directional boring near Edinburg’s Interstate 69C?

The Edinburg price depends on the route and scope, not just its length. Footage, pipe or conduit size, Hidalgo clay loam, utility exposures and pavement all affect planning. An Interstate 69C or Rio Valley Switching Company crossing may require added coordination, and mobilization reflects the road distance from Yukon. Creek crossings, pits and emergency timing also change the work.

Where the Edinburg facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Edinburg

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Edinburg, Texas

Type the address of your job in Edinburg. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Edinburg

Same county: McAllen · Mission · Pharr · Weslaco · San Juan · Alton · Alamo · Mercedes · Donna · Palmview · Hidalgo · La Homa. All counties: Texas county list.