trinityboringsolutions.com

Mercedes Texas Directional Boring: Hidalgo Clay Loam, Interstate 2 and Arroyo Anacuitas

Quick Answer: Trinity Boring Solutions handles directional boring, also called horizontal directional drilling (HDD), for routes under Interstate 2 in Mercedes, Texas. At 717 road miles from our Yukon yard, we schedule our own crews or vetted partner drilling contractors for work near FM 491. Mercedes clay loam can hold an open hole, but sticky cuttings can gather on the reamer and swelling clay can grip pipe. We plan staged reaming and a same day pull where mapped Hidalgo and Harlingen soils show that clay ground.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Mercedes bores at a glance

  • Incorporated city in Hidalgo County, Texas. Population 17,535 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 717 miles, about 14 hours of driving.
  • Ground: Hidalgo soil is mapped on 39 percent of the area, with clay loam about 40 inches down.
  • Rock: no bedrock is mapped in the top 60 inches.
  • Highways inside the boundary: Interstate 2, US 83, US 83 Business, FM 491 and FM 1425. State permit office: TxDOT Pharr District.
  • Railroad track inside the boundary: Rio Valley Switching Company, with 13 mapped street and rail crossings.
  • Named streams inside the boundary: Arroyo Anacuitas and Pilot Channel.
  • Public water: City of Mercedes, surface water.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who can I call for directional boring in Mercedes, Hidalgo County?

Mercedes is 717 road miles from our Yukon yard, so we plan the trip around our own crews or satellite yards operated by vetted partner drilling contractors. The Census Bureau Vintage 2024 estimate gives Mercedes, in Hidalgo County, a population of 17,535. We install water, sewer, gas, electric conduit and fiber on routes along Mile 2 or beneath Interstate 2, with the route and line owner confirmed for the job.

Our main office is in Yukon, Oklahoma, and Mercedes work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. The family business dates to 1965, with directional boring since 1982; our range from 3/4 inch service lines to 48 inch casing fits small connections off Washington Avenue and larger routes near Interstate 2.

Aerial view of a Trinity Boring Solutions directional drill set up for a gas line bore at a commercial site
Our directional drill set up for a gas line bore at a commercial site, seen from above. Photos on this page are from our jobs in Oklahoma and Texas.

What does the soil survey show beneath Mercedes and Hidalgo soil?

The USDA soil survey maps Hidalgo soil across 39 percent of Mercedes, Harlingen across 27 percent, Raymondville across 18 percent and Mercedes soil across 6 percent. At about 40 inches, clay loam is mapped under 57 percent of the area and clay under 34 percent. Sandy clay loam accounts for 3 percent at that depth, while surface mapping shows clay and sandy clay loam each across 34 percent. For boring plans in Mercedes, we treat these as mapped patterns, not test borings. The clay rich profile can stay open, but sticky spoil can load the reamer and swelling ground can grip the pipe.

USDA soil survey, inside the Mercedes city limitsWhat is mapped
Soil series mappedHidalgo 39 percent, Harlingen 27 percent, Raymondville 18 percent and Mercedes 6 percent
Texture at the surfaceclay 34 percent, sandy clay loam 34 percent and clay loam 18 percent
Texture about 40 inches downclay loam 57 percent, clay 34 percent and sandy clay loam 3 percent
Engineering class about 40 inches downlean clay (CL) 60 percent and fat clay (CH) 34 percent
Average clay content about 40 inches down43 percent
Bedrock mapped within 60 inchesNone mapped
Seasonal water table within 60 inches1 percent of the area
Flood prone soils1 percent of the area
High corrosion risk for uncoated steel53 percent of the area
Mapped as urban land (disturbed fill)2 percent of the area

Bedrock is not mapped in the top five feet of Mercedes, which does not rule out rock deeper down. A seasonal water table within 60 inches is mapped in 1 percent of the area, so pits may need pumping if a route lands there. Flood prone soils cover 1 percent, including ground where channel depth matters near Arroyo Anacuitas. Across Mercedes, high steel corrosion risk is mapped across 53 percent, so we consider casing and tracer wire materials for the line owner. The geologic map shows Holocene muddy flood plain alluvium, mostly mud, where fluid control and returns deserve attention.

How do we drill Mercedes clay loam?

Mercedes clay loam and clay can stay around the reamer and tighten against pipe. We match the fluid and reaming sequence to the mapped ground, then track the bore as it advances near local streets and crossings.

  1. Mercedes clay loam and clay can ball on the reamer, so we use a thinner fluid mix, add polymer and open the hole in stages.
  2. Where heavy clay is mapped beneath Mercedes, we watch fluid returns closely so pressure does not lift pavement along Washington Avenue.
  3. Before the last ream near Mile 2, we have the pipe laid out and ready so the clay does not sit open longer than needed.
  4. At Arroyo Anacuitas or a marked utility crossing, we pothole the line first, then track the head from the surface and log depth and pitch.
Walkover locator held over a flowing creek while tracking the drill head on a 385 foot rock bore in Guthrie, Oklahoma
Tracking the drill head with a walkover locator over a flowing creek on a 385 foot bore in Guthrie, Oklahoma.

What does a bore have to cross in Mercedes near Interstate 2?

Interstate 2 and US 83 each have 11.3 mapped roadway miles inside Mercedes; US 83 Business has 4.9, FM 491 has 5.2 and FM 1425 has 1.4. A route beneath existing highway pavement uses boring or tunneling, not an open cut. Mile 2 is the longest named street at 4.55 miles, followed by 2nd Street at 2.94 miles and Mile 8 at 2.55 miles. Washington Avenue adds another 2.27 miles of street to consider when laying out a route and its entry and exit pits.

CrossingTypeMapped extentWho has a say
Interstate 2Interstate11.3 roadway miles insideState highway office
US 83US highway11.3 roadway miles insideState highway office
US 83 BusinessUS highway4.9 roadway miles insideState highway office
FM 491State highway5.2 roadway miles insideState highway office
FM 1425State highway1.4 roadway miles insideState highway office
Rio Valley Switching CompanyRailroad5.23 track miles insideThe railroad
Arroyo AnacuitasStream1.71 channel miles insideChecked for Corps of Engineers jurisdiction
Pilot ChannelStream1.14 channel miles insideChecked for Corps of Engineers jurisdiction
Arroyo ColoradoStream nearbyAlong the boundaryChecked for Corps of Engineers jurisdiction
Main Supply CanalStream nearby0.3 miles outsideChecked for Corps of Engineers jurisdiction
Willacy CanalStream nearby0.6 miles outsideChecked for Corps of Engineers jurisdiction
Llano Grande LakeLake or pond201 acres, insideChecked for Corps of Engineers jurisdiction
Campacuas LakeLake or pond136 acres, nearbyChecked for Corps of Engineers jurisdiction
Hoblitz Elles ReservoirLake or pond66 acres, nearbyChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

Rio Valley Switching Company has 5.23 track miles inside Mercedes, and 13 mapped street and rail crossings make track clearance a real route question. A railroad crossing requires an agreement with the track owner that sets conditions such as casing, depth and flagging. Arroyo Anacuitas runs 1.71 channel miles in the city, while Pilot Channel runs 1.14; nine mapped street crossings cross named streams. Llano Grande Lake is inside the limits, so a water crossing needs jurisdiction checked during planning.

Who approves a Mercedes bore near Rio Valley Switching Company tracks?

Mercedes is incorporated, so its city streets belong to the city; Interstate 2, US 83, FM 491 and FM 1425 are state highway routes. The line owner, not the driller, applies for a TxDOT utility permit through RULIS, with the TxDOT Pharr District reviewing it. We prepare the bore plan and profile for the owner’s filing. State cover rules set highway crossing depth at 60 inches for electric, communication and water lines, and pressurized sewer; the permit can set another depth. A Rio Valley Switching Company crossing needs the railroad’s agreement. A crossing at Arroyo Anacuitas is checked for Corps jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Who owns the lines near the City of Mercedes water system that we may encounter during boring?

The City of Mercedes public water system uses surface water and lists 6,061 service connections serving 16,258 people. That is a useful starting point for a water route, but the specific line still needs to be located along streets such as Mile 2. A city owned electric system is not identified in the records. AEP Texas Central, Oncor Electric Delivery Company and Magic Valley Electric Cooperative report electric service in Hidalgo County, so the line owner must be confirmed for the address before planning an electric conduit bore.

Line ownerWhat it isSourceSize
City of MercedesPublic water systemSurface water6,061 connections, 16,258 people served
AEP Texas Central, Oncor Electric Delivery Company and Magic Valley Electric CooperativeElectric utilities reporting service in Hidalgo CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Mercedes’s median housing year at 1988, which we account for in underground planning. The survey says 15 percent of housing units were built before 1960, 55 percent from 1960 to 1999, and 30 percent in 2000 or later. A route near older homes may involve replacing existing pipe, while newer construction may call for a service extension. Before drilling near marked lines along Washington Avenue, we expose each marked utility by hydrovac; paint shows position, not depth.

Large HDPE conduit reels staged on a Rotate A Reel trailer for a fiber and utility installation in Oklahoma
HDPE conduit reels on a reel trailer for a fiber and utility installation in Oklahoma.

Do you cover Mercedes, Weslaco and nearby areas?

Mercedes is in Hidalgo County, covers 11.8 square miles and sits at an elevation of 69 feet. We account for ZIP code 78570 serving Mercedes when planning underground boring within the city. Heidelberg is 2.6 miles northeast, Bixby is 3.7 miles east, Llano Grande is 3.8 miles southwest, Indian Hills is 4.0 miles north and Weslaco is 4.7 miles west. Weslaco is the nearest larger city; Edinburg, the county seat, is 18.7 miles northwest. From our Yukon yard, Mercedes is 717 road miles away, a 14.0 hour drive, so distance is part of planning work near Interstate 2.

Places near Mercedes

  • Heidelberg: 2.6 miles northeast
  • Bixby: 3.7 miles east
  • Llano Grande: 3.8 miles southwest
  • Indian Hills: 4 miles north
  • Directional boring in Weslaco: 4.7 miles west

What would we bore near Mile 2 in Mercedes?

  • Highway crossing: A route under Interstate 2 keeps existing pavement uncut, with the line owner’s TxDOT permit and crossing conditions built into the plan.
  • Water service: A new connection near the City of Mercedes system can follow a route along Washington Avenue, with existing marked utilities exposed first.
  • Fiber conduit: A run beside Mile 2 may need staged reaming where mapped clay loam can gather on the tool and tighten around the conduit.
  • Creek crossing: A line beneath Arroyo Anacuitas needs a route planned below the channel, with jurisdiction checked during planning.
  • Rail crossing: A route beneath Rio Valley Switching Company tracks needs an agreement from the railroad that sets casing, depth and flagging conditions.
  • Street service: A bore near Mile 8 can place a line without cutting the street, with entry and exit pits kept in the dirt.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What do you need to quote work near Washington Avenue in Mercedes?

For a route near Washington Avenue, start with the address or map pin. Tell us what is going in the ground, such as water or fiber, and the pipe or conduit size. Add the footage and a sketch or plans if you have them. For a crossing near Interstate 2, include the crossing point so we can consider the highway route and permit path.

A simple route beside Mile 2 with clear access and few crossings is easier to plan than a route through clay loam near a creek or track. Length, pipe size, soil, exposed utilities, pavement, pits and backfill all shape the work. Interstate 2 or Rio Valley Switching Company crossings add coordination, while Arroyo Anacuitas can bring water crossing review. Mobilization also reflects Mercedes’s 717 road miles from Yukon. High profile or emergency work can require more planning.

Questions people ask about boring in Mercedes

Does Trinity Boring Solutions take jobs in Mercedes, Hidalgo County, and how are crews assigned?

Yes. We take directional boring work in Texas, including jobs in Mercedes, Hidalgo County. The work may be handled by our own crews or by partner drilling contractors we have vetted. We remain the contact through the bore log, whether the route follows Mile 2 or crosses another local feature.

Who owns the Mercedes track at Rio Valley Switching Company, and what does a bore need?

Rio Valley Switching Company owns the 5.23 track miles mapped inside Mercedes. A bore beneath its tracks needs an agreement from the railroad. That agreement sets crossing requirements such as casing, depth and flagging, so the route near a mapped street and rail crossing needs that coordination.

Can a line be bored under Arroyo Anacuitas in Mercedes?

A bore may be planned beneath Arroyo Anacuitas, which runs 1.71 channel miles inside Mercedes, but the route and channel conditions matter. We check for U.S. Army Corps of Engineers jurisdiction during planning. The nine mapped street crossings of named streams also show why each approach needs a site specific plan.

Who runs the Mercedes public water system, and where does its water come from before we plan nearby boring?

The City of Mercedes owns the public water system, and its source is surface water. Records list 6,061 service connections serving 16,258 people. For work near Mile 2, the exact water line and its location still need to be identified before the bore route is set.

Which electric utilities report service in Mercedes and Hidalgo County, and who confirms conduit specs?

AEP Texas Central, Oncor Electric Delivery Company and Magic Valley Electric Cooperative report electric service in Hidalgo County. We do not treat that information as identifying the provider at every Mercedes address. We confirm the line owner for the location, then the owner confirms the conduit specifications for a route near Interstate 2 or Washington Avenue.

Does the city or county control Mercedes streets like Mile 8, and must we cut the road?

Mercedes is incorporated, so its city streets belong to the city rather than the county. A directional bore can keep Mile 8 pavement uncut, with entry and exit pits placed in the dirt on each side of the route. The exact access and crossing plan depends on the site.

Does Trinity cover Heidelberg near Mercedes and rural sites outside the city?

Yes. We take work across Texas, including Mercedes, nearby Heidelberg and rural sites outside city limits. Heidelberg is 2.6 miles northeast of Mercedes, and a rural route may have different access or crossing conditions than work beside Interstate 2. We review the location and scope before planning the bore.

How much Texas811 notice is needed for a Mercedes bore along Mile 2, and what if marks fade?

For a bore along Mile 2, the locate request goes to Texas811 at least 48 hours before excavation starts, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days ahead. When our start slips more than 14 days past the original notice, we make a new request before boring. Before we continue work in Mercedes, we have worn or moved marks refreshed through Texas811.

What affects the cost of directional boring in Mercedes near Interstate 2?

The job scope drives the price, with no single factor deciding it. Length, pipe size, clay loam, utilities that must be exposed, pavement, pits and backfill all matter. A route under Interstate 2 or Rio Valley Switching Company tracks needs crossing coordination, and mobilization reflects the 717 road miles from Yukon.

Where the Mercedes facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Mercedes

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Mercedes, Texas

Type the address of your job in Mercedes. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Mercedes

Same county: McAllen · Edinburg · Mission · Pharr · San Juan · Alton · Alamo · Donna · Palmview · Hidalgo · La Homa · Murillo. All counties: Texas county list.