trinityboringsolutions.com

Elbert Texas Directional Boring: Sagerton Clay Loam, Texas State Highway 79, Boggy Creek

Quick Answer: Trinity Boring Solutions does directional boring, also called horizontal directional drilling (HDD), for crossings of Texas State Highway 79 in Elbert, Texas. Elbert is 204 road miles from our Yukon, Oklahoma main office, and Boggy Creek is one local crossing to plan around. Sagerton clay loam is the main mapped soil. Sticky clay can grip pipe, so the bore needs controlled fluid and staged reaming.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Elbert bores at a glance

  • Unincorporated community in Throckmorton County, Texas. Population 29 (2020 Census count).
  • Road distance from our Yukon, Oklahoma main office: 204 miles, about 4.4 hours of driving.
  • Ground: Sagerton soil is mapped on 45 percent of the area, with clay loam about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 18 percent of the area.
  • Highways inside the boundary: Texas State Highway 79 and FM 1711. State permit office: TxDOT Wichita Falls District.
  • Railroad track inside the boundary: none mapped.
  • Named streams inside the boundary: Boggy Creek and Leopard Creek.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who does directional boring in Elbert near Texas State Highway 79?

Trinity Boring Solutions takes directional boring work in Elbert, Throckmorton County, including routes near Texas State Highway 79. The Sagerton clay loam here can be sticky and grip a pipe. Elbert had 29 residents in the 2020 Census count; the Census Bureau does not publish yearly estimates for unincorporated places. Our crews install water, sewer, gas, electric conduit and fiber along routes such as FM 1711 and Elbert Cemetery Road.

Our main office is in Yukon, Oklahoma, and Elbert work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our family business began in 1965 and has done directional boring since 1982, with Texas State Highway 79 shaping crossing plans. Our 3/4 inch service lines to 48 inch casing range fits the varied utility routes along Texas State Highway 79 and FM 1711.

Trinity Boring Solutions branded compact directional drilling unit positioned beside a tree on a red dirt jobsite
Our compact directional drill set up beside a tree on a tight site. Photos on this page are from our jobs in Oklahoma and Texas.

What kind of ground does Elbert have around Sagerton soil?

The USDA soil survey maps Sagerton clay loam across much of Elbert, so a bore should be planned for clay that can hold a hole but stick to the reamer. Sagerton is the leading soil series at 45 percent of the mapped area, and the Sagerton clay loam map unit covers 39 percent. At about 40 inches below the surface, clay loam is mapped across 46 percent and clay across 28 percent. At that depth, average clay content is 37 percent; Elbert’s clay loam surface is relevant when planning underground work. We use Sagerton, Leeray, Clearfork and Jolly map patterns for planning in Elbert, not as test borings.

USDA soil survey, inside the Elbert mapped community boundaryWhat is mapped
Soil series mappedSagerton 45 percent, Leeray 22 percent, Clearfork 12 percent, Jolly 11 percent and Vernon 3 percent
Texture at the surfaceclay loam 48 percent, clay 27 percent and fine sandy loam 13 percent
Texture about 40 inches downclay loam 46 percent, clay 28 percent and bedrock 13 percent
Engineering class about 40 inches downlean clay (CL) 58 percent and fat clay (CH) 29 percent
Average clay content about 40 inches down37 percent
Bedrock mapped within 60 inches18 percent of the area (0 percent hard rock, 18 percent weathered rock)
Seasonal water table within 60 inches0 percent of the area
Flood prone soils12 percent of the area
High corrosion risk for uncoated steel32 percent of the area

The USDA soil survey maps weathered bedrock within 60 inches across 18 percent of Elbert, with a typical depth of 21 inches, so the route may shift from soil into slower drilling. Santa Anna Branch shale, of Cisuralian age, includes shale, mudstone and sandstone. A seasonal water table is not mapped within 60 inches, while flood prone soils cover 12 percent of the area near places such as Boggy Creek. High steel corrosion risk is mapped across 32 percent, so the line owner should consider casing and tracer wire materials; HDPE is not affected by soil corrosion.

How do we drill Elbert’s clay loam?

For Elbert’s mapped Sagerton clay loam, we manage sticky cuttings and avoid letting the hole grip the pipe. Boggy Creek and Texas State Highway 79 also shape the route and fluid plan.

  1. In Sagerton clay loam, we use drilling fluid suited to sticky cuttings and ream in stages so clay does not build up on the tool.
  2. Because clay can swell around pipe, we plan the pullback for the same work period as opening the hole along FM 1711.
  3. At Boggy Creek, we plan bore depth below the channel and check jurisdiction before settling on the crossing route.
  4. For a route near Texas State Highway 79, we track the drill head from the surface and log depth and pitch as it advances.
Walkover locator at the edge of the wetland on a directional bore at the Cimarron site in Logan County, Oklahoma
Walkover locator at the edge of a wetland on a directional bore in Logan County, Oklahoma.

Which roads or creeks could a bore cross in Elbert near Boggy Creek?

A bore in Elbert may need to pass beneath Texas State Highway 79, FM 1711 or Boggy Creek without cutting the surface. The mapped community includes 2.8 roadway miles of Texas State Highway 79 and 2.5 miles of FM 1711. Elbert Cemetery Road is the only named local street in the records, with 0.15 miles inside the community. Boring beneath existing highway pavement keeps the travel surface intact, while the route and work space still need to fit the crossing and entry and exit pits.

CrossingTypeMapped extentWho has a say
Texas State Highway 79State highway2.8 roadway miles insideState highway office
FM 1711State highway2.5 roadway miles insideState highway office
Boggy CreekStream4.83 channel miles insideChecked for Corps of Engineers jurisdiction
Leopard CreekStream4.31 channel miles insideChecked for Corps of Engineers jurisdiction
Long CreekStream nearby0.4 miles outsideChecked for Corps of Engineers jurisdiction
Brazos RiverStream nearby0.5 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

No railroad is mapped inside Elbert or within one mile outside the community, so there is no mapped track route to plan around. Boggy Creek runs 4.83 channel miles inside the community and Leopard Creek runs 4.31 miles; six mapped street crossings intersect named streams. Long Creek and the Brazos River are also close by, at 0.4 and 0.5 miles from the boundary. A creek route needs depth planning below the channel and a check for federal waterway jurisdiction.

Do I need a permit for a bore in Elbert, Throckmorton County?

A bore in the right of way of Texas State Highway 79 or FM 1711 needs a TxDOT utility permit, reviewed by the Wichita Falls District. The utility owner, not our crew, submits the application through RULIS; we prepare the bore plan and profile for that filing. TxDOT cover requirements set the depth under each road, and the permit can require a different depth. Existing highway pavement is bored or tunneled beneath, with rural highway crossings extending beneath all travel lanes. Elbert has no city government, so county roads are handled by the county. Boggy Creek crossings are checked for federal jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Which utility lines are in Elbert, Throckmorton County?

The water provider for an Elbert address must be confirmed with the county or local water district before a bore is planned; EPA drinking water records do not tie a provider to this place. For electric service in Throckmorton County, AEP Texas North, Big Country Electric Cooperative and Tri-County Electric Cooperative report service. Those county records do not identify the provider at every address. We confirm the line owner before planning an electric conduit bore near Texas State Highway 79 or FM 1711.

Line ownerWhat it isSourceSize
AEP Texas North, Big Country Electric Cooperative and Tri-County Electric CooperativeElectric utilities reporting service in Throckmorton CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

Housing figures are not published for a place as small as Elbert because the survey sample is too small to rely on. That means a proposed line along FM 1711 or Elbert Cemetery Road needs address level checking rather than assumptions about service age or route length. Throckmorton County averages 28.0 inches of precipitation a year, with May averaging 3.6 inches and January 1.2 inches. Before drilling near a marked line, we use hydrovac potholing to expose it; paint shows position, not depth.

Mini excavator digging beside a pad mounted electrical transformer with red dirt spoil and a vacuum excavation trailer on site
Digging beside a pad mounted electric transformer with a vacuum excavation trailer on site.

Where is Elbert in relation to Throckmorton and nearby towns?

Elbert is an unincorporated census designated place in Throckmorton County, on the county’s eastern side. The mapped community covers 6.02 square miles and sits at an elevation of 1,171 feet. Its ZIP code is 76372. Throckmorton, the county seat, is 12.1 miles southwest; Megargel is 13.0 miles north; Olney is 15.4 miles northeast; Newcastle is 15.9 miles east; and Woodson is 18.2 miles south. Graham is the nearest larger city, 27.3 miles southeast. From our Yukon yard, Elbert is 204 road miles and a 4.4 hour drive.

Places near Elbert

What would we bore near Elbert Cemetery Road?

  • Highway crossing: A bore beneath Texas State Highway 79 keeps the roadway uncut and follows the cover depth in the TxDOT permit.
  • Water service: A route from a property near FM 1711 needs the address specific water provider confirmed before we plan the bore.
  • Fiber conduit: A run along Elbert Cemetery Road can place conduit underground without opening the narrow named street.
  • Creek crossing: A Boggy Creek bore needs a route planned beneath the channel and a jurisdiction check before drilling.
  • Electric conduit: Near Texas State Highway 79, the line owner must be confirmed before conduit size and bore details are set.
  • Rural service: A line near Leopard Creek needs a route that accounts for the channel and the mapped clay soils.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What do you need to quote a bore under Texas State Highway 79 in Elbert?

For a Texas State Highway 79 crossing, start with the Elbert address or a map pin. Tell us what will go underground, such as water service or fiber, then give the pipe or conduit size and the footage. A sketch or plans showing the road, pits and nearby features such as Boggy Creek help us understand the route.

The main price driver in Elbert is the ground: Sagerton clay loam and clay can cling to the reamer and slow staged work. Crossing Texas State Highway 79 adds highway cover and work space requirements; a Boggy Creek route adds waterway planning. Pipe size, bore length, marked utilities to expose, pavement, pit work and backfill also shape the scope. Mobilization matters because Elbert is 204 road miles from our Yukon yard. We allow extra planning for emergency or high profile work, with Texas State Highway 79 permits routed through TxDOT Wichita Falls District.

Questions people ask about boring in Elbert

Does Trinity Boring Solutions take jobs in Elbert, Throckmorton County, and who staffs them?

Yes, we take directional boring work in Elbert, Throckmorton County. Our own crews handle jobs, with work also supported from satellite yards run by partner drilling contractors we have personally vetted. You deal with Trinity from the first call through the bore log, whether the crew is ours or a vetted partner crew.

Who owns electric lines in Elbert, Throckmorton County, and who confirms conduit specs?

The line owner depends on the address, so we confirm it before planning an electric conduit bore in Elbert. AEP Texas North, Big Country Electric Cooperative and Tri-County Electric Cooperative report service in Throckmorton County, but that does not identify the provider for every property near FM 1711. The owner confirms conduit requirements.

Who is responsible for Elbert streets in Throckmorton County, and can we bore without cutting one?

Elbert has no city government, so county roads are handled by the county and state highways by TxDOT. Directional boring can pass beneath Elbert Cemetery Road without an open cut, subject to the route and access available. Work within Texas State Highway 79 right of way needs a TxDOT utility permit.

Could water or flood prone ground near Elbert’s Boggy Creek fill bore pits?

It can affect planning near Boggy Creek, where flood prone soils are mapped across 12 percent of Elbert. A seasonal water table within 60 inches is not mapped, but that does not remove the need to assess creek conditions at the actual route. We plan pit locations and check waterway jurisdiction before a crossing.

Does Elbert’s Sagerton soil corrode steel, and what pipe should I use?

The USDA soil survey maps high steel corrosion risk across 32 percent of Elbert, so the line owner should consider casing and tracer wire materials. Sagerton clay loam covers 39 percent of the mapped area. HDPE is not affected by soil corrosion, but the line owner selects any coating for steel components.

What ground will a bore pass through in Elbert’s Sagerton soil?

Elbert is mapped mainly with Sagerton soil, and clay loam is the leading texture at about 40 inches below the surface. The USDA soil survey maps clay loam across 46 percent and clay across 28 percent at that depth. Sticky clay can load a reamer, so we plan fluid and staged reaming for the route.

Does Trinity cover rural sites near Elbert and Throckmorton too?

Yes, we take work in Elbert, nearby Throckmorton and rural sites outside the mapped community. Throckmorton is 12.1 miles southwest and is the county seat. For a rural route near Boggy Creek or FM 1711, the address, ground conditions and crossing details help define the bore plan.

How much notice does Texas811 need for work on Elbert Cemetery Road, and what if marks move?

For a bore on Elbert Cemetery Road, make the Texas811 request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays. File no earlier than 14 days before the start. If the start moves more than 14 days past the original notice, submit a new request; worn or moved marks need refreshing through Texas811 before work continues.

What affects the cost of a directional bore under Texas State Highway 79 in Elbert?

The job details determine the price, not the highway name alone. In Elbert, Sagerton clay loam can affect drilling time, while a Texas State Highway 79 crossing brings cover and access needs. Bore length and conduit size, utility potholing, pavement, pits, creek crossings such as Boggy Creek, and mobilization from Yukon also shape the work.

Where the Elbert facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Elbert

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Elbert, Texas

Type the address of your job in Elbert. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Elbert

All counties: Texas county list.