trinityboringsolutions.com

Graham Texas Directional Boring: Bluegrove Soil, US 380 and Salt Creek

Quick Answer: Can you get a line beneath US 380 without cutting the pavement? Yes, Trinity Boring Solutions handles directional boring, also called horizontal directional drilling (HDD), in Graham, Texas, for crossings such as US 380. Graham is 203 road miles from our Yukon, Oklahoma, main office, and a route near 4th Street can shape the work. Bluegrove soil is common, while clay at about 40 inches can make a reamer sticky and call for staged passes.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Graham bores at a glance

  • County seat of Young County, Texas. Population 8,859 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 203 miles, about 4.3 hours of driving.
  • Ground: Bluegrove soil is mapped on 21 percent of the area, with clay about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 59 percent of the area.
  • Highways inside the boundary: US 380, Texas State Highway 16, FM 2179, Texas State Highway 67 and FM 61. State permit office: TxDOT Wichita Falls District.
  • Railroad track inside the boundary: none mapped.
  • Named streams inside the boundary: Salt Creek, Dry Creek and Farmers Branch.
  • Public water: City of Graham, surface water.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who handles directional boring beneath US 380 in Graham?

Trinity Boring Solutions takes directional boring work in Graham, including routes beneath US 380 where pavement can stay uncut. Can you get a water, sewer, gas, electric conduit or fiber line beneath that road without opening the surface? Yes, we plan the bore for the route and the line going in. The Census Bureau Vintage 2024 estimate puts Graham at 8,859 people in Young County, where these lines may serve homes or connect utility routes.

Our main office is in Yukon, Oklahoma, and Graham work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. We began as a family business in 1965 and have done directional boring since 1982. Our roughly 4,100 foot, 48 inch bore under the Arkansas River in Tulsa shows our reach; a Graham route beneath US 380 is a smaller project planned around its own ground and access.

Aerial view of Trinity Boring Solutions crew and service van at a multifamily apartment underground utility jobsite in Oklahoma City
Our crew and service van at a multifamily underground utility job in Oklahoma City, seen from above. Photos on this page are from our jobs in Oklahoma and Texas.

What ground should you expect in Graham near Bluegrove soil?

Graham soil maps show Bluegrove fine sandy loam as the leading mapped soil, with clay and bedrock common about 40 inches below the surface. The USDA soil survey maps Bluegrove across 21 percent of the city and Newcastle Jolly complex across 15 percent. At about 40 inches, clay is mapped under 41 percent of the area, while sandy ground accounts for 15 percent. These are survey patterns, not test borings, so the route still needs to be planned for the actual conditions beneath a street such as Hillcrest Drive.

USDA soil survey, inside the Graham city limitsWhat is mapped
Soil series mappedBluegrove 21 percent, Newcastle 15 percent, Shatruce 12 percent, Anocon 10 percent and Thurber 7 percent
Texture at the surfacefine sandy loam 62 percent, loam 8 percent and clay loam 7 percent
Texture about 40 inches downclay 41 percent, bedrock 40 percent and sandy clay loam 11 percent
Engineering class about 40 inches downlean clay (CL) 46 percent and fat clay (CH) 14 percent
Average clay content about 40 inches down35 percent
Bedrock mapped within 60 inches59 percent of the area (0 percent hard rock, 59 percent weathered rock)
Seasonal water table within 60 inches0 percent of the area
Flood prone soils7 percent of the area
High corrosion risk for uncoated steel59 percent of the area

The USDA soil survey places bedrock within 60 inches across 59 percent of Graham, with typical bedrock depth at 33 inches, so a bore may slow where weathered rock meets soil. No seasonal water table is mapped within 60 inches, while flood prone soils cover 7 percent of the area; Salt Creek still merits attention at a crossing. For 4th Street crossings, we account for the mapped high steel corrosion risk across 59 percent when planning boring materials. The geologic map names the Thrifty and Graham Formations, undivided, of Gzhelian age, with shale, sandstone and limestone that can affect drilling pace.

How do we bore through Graham clay?

We adjust the bore plan to Graham’s mapped clay and shallow bedrock, rather than treating every route as the same. Near Salt Creek, we also plan the path to stay below the channel.

  1. Bluegrove fine sandy loam is widespread in Graham, but clay appears at about 40 inches across 41 percent of the mapped area, so we use staged reaming when the hole starts to load the tool.
  2. Where Graham’s mapped clay is sticky, we adjust the drilling fluid and watch returns so pressure does not lift pavement near US 380 or a street crossing.
  3. Bedrock is mapped within 60 inches across 59 percent of Graham; weathered shale or sandstone may slow the bit, and the soil to rock change can push the head off line.
  4. At Salt Creek, we plan the path beneath the channel and track the drill head from the surface, logging depth and pitch as the bore advances.
Rod box on the Vermeer D24x40 S3 Navigator with the bore path heading toward the trees on a rock bore in Guthrie, OK
Rod box on our Vermeer D24x40 with the bore path heading toward the trees on a rock bore in Guthrie, Oklahoma.

What might a new line cross in Graham near Salt Creek?

Graham has US 380, Texas State Highway 16, FM 2179, Texas State Highway 67 and FM 61 within its limits, so a route can involve a state road as well as a local street. 4th Street is the longest named street at 2.84 miles, followed by 380 Bypass at 2.63 miles and Cliff Drive at 2.25 miles. A bore beneath Hillcrest Drive or one of these highways can avoid an open cut, but the route and surface conditions determine the plan.

CrossingTypeMapped extentWho has a say
US 380US highway3 roadway miles insideState highway office
Texas State Highway 16State highway4 roadway miles insideState highway office
FM 2179State highway1.1 roadway miles insideState highway office
Texas State Highway 67State highway0.9 roadway miles insideState highway office
FM 61State highway0.3 roadway miles insideState highway office
Salt CreekStream2.35 channel miles insideChecked for Corps of Engineers jurisdiction
Dry CreekStream1.51 channel miles insideChecked for Corps of Engineers jurisdiction
Farmers BranchStream0.22 channel miles insideChecked for Corps of Engineers jurisdiction
Lake EddlemanStream nearby0.1 miles outsideChecked for Corps of Engineers jurisdiction
Flatrock CreekStream nearby0.6 miles outsideChecked for Corps of Engineers jurisdiction
Willow BranchStream nearby0.7 miles outsideChecked for Corps of Engineers jurisdiction
Brazos RiverStream nearby1 miles outsideChecked for Corps of Engineers jurisdiction
Lake EddlemanLake or pond544 acres, nearbyChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

No railroad is mapped inside Graham or within one mile outside its limits, and no street and rail crossings are mapped in the city. Salt Creek runs 2.35 channel miles within Graham and Dry Creek runs 1.51 miles; four mapped street crossings of named streams make water routes part of the planning. Lake Eddleman sits 0.1 miles from the limits. A creek or lake crossing is checked for U.S. Army Corps of Engineers jurisdiction during planning.

Who approves a bore on Graham roads in Young County?

In Graham, the City of Graham is responsible for its city streets, while TxDOT reviews work in state highway right of way through the Wichita Falls District. The line owner, not our drilling crew, applies for a utility permit in TxDOT’s RULIS system for a bore under US 380, Texas State Highway 16 or another covered route. We prepare the bore plan and profile for the owner’s application and work under its permit. For electric or communication lines, cover is at least 60 inches at a crossing and 48 inches along the right of way; water lines need 60 inches at crossings and 36 inches along it. Salt Creek planning also checks Corps jurisdiction.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Who owns lines near the City of Graham water system?

The City of Graham owns the public water system, which uses surface water and reports 7,840 service connections serving 8,718 people. For electric service in Young County, Oncor Electric Delivery Company, Texas-New Mexico Power and United Electric Cooperative Service report service; that list does not identify the provider at every address. Before planning an electric conduit bore along 4th Street, we confirm the line owner and the conduit requirements with that owner.

Line ownerWhat it isSourceSize
City of GrahamPublic water systemSurface water7,840 connections, 8,718 people served
Oncor Electric Delivery Company, Texas-New Mexico Power and United Electric Cooperative ServiceElectric utilities reporting service in Young CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Graham’s median housing year at 1970; 33 percent of homes were built before 1960, 59 percent from 1960 to 1999 and 8 percent in 2000 or later. Older housing can mean a replacement route near Cliff Drive, while newer development may need a service extension. Before the drill approaches any marked utility, we expose it with hydrovac potholing because paint along 380 Bypass shows position, not depth. For a proposed bore beneath 380 Bypass, that means exposing each marked line on the path before drilling near it.

Large HDPE conduit reels staged on a Rotate A Reel trailer for a fiber and utility installation in Oklahoma
HDPE conduit reels on a reel trailer for a fiber and utility installation in Oklahoma.

Where does Graham directional boring reach near Newcastle?

Graham is the incorporated county seat of Young County, covering 5.6 square miles at an elevation of 1,072 feet. ZIP code 76450 serves Graham, so we confirm the city limits before planning underground boring work. Nearby places include Loving, 11.3 miles north, Newcastle, 11.6 miles northwest, and Bryson, 11.8 miles east; Olney is 21.0 miles northwest. From the Yukon, Oklahoma, main office, the road distance is 203 miles and the drive is 4.3 hours. Routes toward Newcastle or along US 380 can be considered for work across the city and nearby service areas.

Places near Graham

What kinds of bores come up around Graham’s 4th Street?

  • Highway crossing: A route beneath US 380 can carry water, sewer or conduit while keeping the existing pavement uncut.
  • Water service: A connection near the City of Graham system needs a route planned around marked lines and the proposed service size.
  • Fiber conduit: A run along 4th Street can pass beneath pavement instead of opening a trench through the street.
  • Creek crossing: A Salt Creek bore needs a planned path below the channel and a check for Corps jurisdiction.
  • Street replacement: A line near Cliff Drive can be bored around existing utilities rather than opened across the full surface.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What do you need to quote a bore near Graham’s Hillcrest Drive?

For a Graham quote, start with where the work is, such as an address or map pin near Hillcrest Drive. Tell us what goes underground, such as a water line or fiber conduit, its size and the footage. A sketch or plans help show whether the route approaches US 380, Salt Creek or another crossing, so we can see the likely path and access.

The route and ground set the price for a Graham bore. Soil and rock come first: clay at about 40 inches and mapped shallow bedrock can change drilling and reaming. The number of utilities to expose matters on a crowded 4th Street route, as do pavement and creek crossings such as Salt Creek. Length, pipe size, pits, excavator time and sand backfill also shape the work. Mobilization reflects Graham’s 203 road miles from Yukon; high profile or emergency work can add planning needs.

Questions people ask about boring in Graham

Does Trinity take directional boring jobs in Young County near Graham?

Yes, we take directional boring work in Graham and across Texas. The job is handled with our own crews or from a satellite yard run by a drilling contractor we have vetted, not from a Graham office. You work with Trinity from the first call through the bore log, including work near US 380.

Young County: who runs Graham’s public water system, and where does its water come from?

The City of Graham owns the public water system, and its source is surface water. Public records list 7,840 service connections serving 8,718 people. For a proposed line near 4th Street, the service connection and route still need to be identified before the bore is planned.

Which electric companies report service in Young County near Graham?

Oncor Electric Delivery Company, Texas-New Mexico Power and United Electric Cooperative Service report electric service in Young County. Those records do not show which provider serves every Graham address. Before a conduit bore near 380 Bypass, we confirm the line owner and conduit specifications for that location.

Who controls Graham streets like Cliff Drive, and can a bore avoid cutting one?

The City of Graham is responsible for its city streets, including Cliff Drive. Directional boring can route a line beneath a street without an open cut when the site and utility layout allow it. We check marked lines on the proposed path before drilling near them.

What do older homes near Graham’s 380 Bypass mean for replacement bores?

Graham’s median housing year is 1970 in the American Community Survey 2019 to 2023 five year estimates. Older areas near 380 Bypass may need a replacement route around existing utilities, while newer construction may call for a service extension. The specific line and path determine the bore plan.

Does Bluegrove soil in Graham corrode steel, and what pipe should I use?

The USDA soil survey maps high steel corrosion risk across 59 percent of Graham, so the line owner should consider casing and tracer wire materials. Bluegrove fine sandy loam is mapped across 21 percent of the city. HDPE is not affected by soil corrosion; the line owner selects coatings for steel.

Can I reach Trinity after hours for an urgent bore near Cliff Drive in Graham?

Yes, a person answers Trinity’s phone 24 hours a day at (405) 409-7423. For urgent work near Cliff Drive, tell us the location, the line involved and what must be crossed so we can understand the request. Trinity also provides 24 hour emergency response.

How early should I call Texas811 for a Graham bore near 4th Street?

For a bore near 4th Street, submit the Texas811 locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days beforehand. If work moves more than 14 days beyond the original notice, make a new request. Before continuing along 380 Bypass, we have worn or moved marks refreshed through Texas811.

What affects the cost of directional boring under US 380 in Graham?

The route and its conditions determine the price for a US 380 bore. Length and pipe size matter, along with Graham’s clay and shallow mapped bedrock, utilities to expose, pavement, pits and any creek crossing. Mobilization from the Yukon office also matters because Graham is 203 road miles away.

Where the Graham facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Graham

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Graham, Texas

Type the address of your job in Graham. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Graham

All counties: Texas county list.