Farnsworth Texas Directional Boring: Sherm Clay Loam, FM 376 And Highway 15
Quick Answer: Farnsworth Water Supply Corporation owns the public water system, while Southwestern Public Service and North Plains Electric Cooperative report electric service in Ochiltree County, so we confirm the line owner before a bore near FM 376. Trinity Boring Solutions takes directional boring, also called horizontal directional drilling (HDD), in Farnsworth, including routes beneath FM 376 or Olds Avenue. Farnsworth is 222 road miles from our Yukon, Oklahoma yard, with Perryton 11.0 miles northeast. Sherm clay loam makes up 96% of mapped soil, so sticky cuttings and pressure under pavement deserve attention.
Farnsworth bores at a glance
- Unincorporated community in Ochiltree County, Texas. Population 95 (2020 Census count).
- Road distance from our Yukon, Oklahoma main office: 222 miles, about 4.9 hours of driving.
- Ground: Sherm soil is mapped on 96 percent of the area, with clay loam about 40 inches down.
- Rock: no bedrock is mapped in the top 60 inches.
- Highways inside the boundary: FM 376 and Texas State Highway 15. State permit office: TxDOT Amarillo District.
- Railroad track inside the boundary: none mapped.
- Public water: Farnsworth Water Supply Corporation, groundwater wells.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Who can I call for directional boring on Farnsworth’s Olds Avenue?
We take directional boring work in Farnsworth, where Farnsworth Water Supply Corporation owns the public water system and electric service is reported by Southwestern Public Service and North Plains Electric Cooperative in Ochiltree County; confirming the line owner matters before drilling near existing lines. The Census Bureau counted 95 people here in 2020. We install water, sewer, gas, electric conduit and fiber along routes such as Olds Avenue and FM 376.
Our main office is in Yukon, Oklahoma, and Farnsworth work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our family business began in 1965, then moved into directional boring in 1982. From the 3/4 inch service lines used on small connections to 48 inch casing, we match equipment and bore length to the Farnsworth route and its ground.

What does the USDA soil survey show for Farnsworth and Sherm soil?
The USDA soil survey maps Sherm clay loam across 96% of Farnsworth, so most planned routes enter cohesive, sticky ground rather than sand. About 40 inches below the surface, 96% of mapped soil is clay loam and 4% is clay; the survey reports an average clay content of 36% at that depth. Sherm and Ness soil series give us mapped patterns for planning Farnsworth bores, not a substitute for test borings. For a bore near Olds Avenue, clay can hold an open hole, but it can also stick to the reamer and grip the pipe.
| USDA soil survey, inside the Farnsworth mapped community boundary | What is mapped |
|---|---|
| Soil series mapped | Sherm 96 percent and Ness 4 percent |
| Texture at the surface | clay loam 96 percent and clay 4 percent |
| Texture about 40 inches down | clay loam 96 percent and clay 4 percent |
| Engineering class about 40 inches down | lean clay (CL) 96 percent and fat clay (CH) 4 percent |
| Average clay content about 40 inches down | 36 percent |
| Bedrock mapped within 60 inches | None mapped |
| Seasonal water table within 60 inches | 4 percent of the area |
| Flood prone soils | 0 percent of the area |
| High corrosion risk for uncoated steel | 96 percent of the area |
Bedrock is not mapped in the top five feet of Farnsworth, which does not rule out rock deeper down. The mapped seasonal water table occurs in 4% of the area, while flood prone soils are not mapped. High steel corrosion risk covers 96% of mapped soil, so the line owner should consider casing and tracer wire materials; HDPE is not affected by soil corrosion. The Blackwater Draw Formation is mapped as Pleistocene sand, with local clay and caliche, above mapped Paleocene Cenozoic sedimentary rocks.
What does it take to bore Farnsworth’s clay loam?
Farnsworth’s Sherm clay loam can hold a bore open but may load a reamer with sticky cuttings. Along FM 376, we manage fluid pressure carefully so returns do not lift pavement.
- In Sherm clay loam, we use a thinner drilling fluid and polymer to limit sticky cuttings, then ream in stages before pulling pipe through the open hole.
- Because mapped Farnsworth soil has 36% average clay at about 40 inches, we watch returns and keep pressure in check near FM 376 pavement.
- Before drilling near Olds Avenue, we expose marked utilities with hydrovac potholes; surface paint shows a line’s position but not its depth.
- The seasonal water table is mapped in 4% of Farnsworth, so we keep pits small and pump them if water gathers near a Locust Street bore.

What is in the way of a new line in Farnsworth near FM 376?
FM 376 and Texas State Highway 15 run inside Farnsworth’s mapped community boundary, so a route that crosses either highway needs a plan for the state right of way. Olds Avenue is the longest named street at 0.22 miles; Aspen Street and Locust Street each measure 0.18 miles, and Rogers Avenue measures 0.14 miles. Boring can keep pavement and driveways uncut, with entry and exit pits placed in dirt. No highway is mapped within 1.5 miles outside the boundary.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| FM 376 | State highway | 2.4 roadway miles inside | State highway office |
| Texas State Highway 15 | State highway | 1 roadway miles inside | State highway office |
No railroad is mapped inside Farnsworth or within 1 mile outside it, so the mapped community has no track route to plan around. No named stream, lake or pond is mapped nearby, and street crossings of named streams are not mapped. That leaves FM 376, Texas State Highway 15 and the short local streets as the mapped crossing features to review for a proposed bore.
Whose permission does a Farnsworth bore in Ochiltree County need?
Farnsworth is an unincorporated community, so it has no city government; county or state authorities handle its streets and permits. For work in the right of way of FM 376 or Texas State Highway 15, the line owner, not the driller, applies for a TxDOT utility permit through RULIS. We prepare the bore plan and profile for the owner’s application and work under the permit issued to that owner. The TxDOT Amarillo District reviews it. TxDOT cover rules call for 60 inches at highway crossings for electric, communication and water lines, and for pressurized sewer; the permit can set a different depth.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Which utilities serve Farnsworth through Farnsworth Water Supply Corporation?
Farnsworth Water Supply Corporation owns the public water system, which uses groundwater wells and serves 100 people through 42 service connections. For electric service, Southwestern Public Service and North Plains Electric Cooperative report service in Ochiltree County; that does not identify the line owner for every Farnsworth address. We confirm the owner before planning an electric conduit bore near Locust Street or FM 376.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| Farnsworth Water Supply Corporation | Public water system | Groundwater wells | 42 connections, 100 people served |
| Southwestern Public Service and North Plains Electric Cooperative | Electric utilities reporting service in Ochiltree County | EIA Form 861 | Confirm the line owner by address |
Housing data is not published reliably for a place as small as Farnsworth, so a route along Olds Avenue may involve existing service lines or a new connection without a dependable age estimate. The 5.81 miles of public road centerlines and the local water system help define where to check. June averages 3.2 inches of precipitation, the wettest month, so pits may need attention when the ground is wet. We pothole marked utilities before drilling near them; paint shows position, not depth.

Do you cover Farnsworth and nearby Waka?
We serve Farnsworth in Ochiltree County, with Waka 4.7 miles southwest and Perryton 11.0 miles northeast. The Census Bureau counted 95 residents in 2020, and the mapped community covers 1.34 square miles at an elevation of 2,993 feet. ZIP code 79033 serves the area. Perryton is both the county seat and the nearest larger city. Our Yukon, Oklahoma yard is 222 road miles away, a 4.9 hour drive, which affects crew and equipment mobilization for work near FM 376.
Places near Farnsworth
- Directional boring in Waka: 4.7 miles southwest
- Directional boring in Perryton: 11 miles northeast
- Directional boring in Spearman: 14.8 miles southwest
- Directional boring in Gruver: 24.7 miles west
- Directional boring in Booker: 25.8 miles northeast
What would we bore on Farnsworth’s Locust Street?
- Highway crossing: A bore beneath FM 376 can keep the existing roadway intact, with the line owner arranging the required state permit.
- Water service: A connection near Farnsworth Water Supply Corporation’s groundwater system needs a route checked against existing lines before drilling.
- Fiber route: A fiber bore along Olds Avenue can pass beneath the street surface while entry and exit pits sit in dirt.
- Electric conduit: Near Locust Street, we first confirm which reported Ochiltree County provider owns the line and verify marked utilities.
- Street connection: A sewer or water line near Rogers Avenue can be bored beneath pavement rather than opened across the street.
- State highway route: A line crossing Texas State Highway 15 needs a bore plan that fits the TxDOT right of way permit.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What do you need to quote a bore near Farnsworth’s Rogers Avenue?
For a Rogers Avenue quote, send the address or map pin, what is going in the ground, the pipe or conduit size and the footage; a sketch or plans help. Tell us whether the route meets Locust Street, FM 376 or Texas State Highway 15, since the crossing and access details change the bore plan.
A short route in Sherm clay loam with clear access may be simpler to plan than a longer crossing under FM 376. Length, pipe or conduit size, soil, utilities to expose, pavement, pit work and mobilization all shape the price. Farnsworth’s 222 road miles from Yukon matter for mobilization, and the mapped high steel corrosion risk may affect casing or tracer wire choices. A highway crossing also brings permit and cover requirements into the scope.
Questions people ask about boring in Farnsworth
Does Trinity take directional boring work in Farnsworth, Ochiltree County, and who staffs it?
Yes, we take Farnsworth work and handle it through our own crews or satellite yards operated by partner drilling contractors we have vetted. Trinity remains your contact from the first call through the bore log. For a route near FM 376, we match the crew and equipment to the line, access and mapped ground.
What ground does a bore pass through in Farnsworth’s Sherm soil?
Most mapped Farnsworth ground is Sherm clay loam, and the USDA soil survey maps clay loam across 96% of the area at about 40 inches below the surface. Clay is mapped across the remaining 4% at that depth. This cohesive ground can hold an open hole but may stick to the reamer, so a route near Olds Avenue needs controlled fluid and staged reaming.
Will a directional bore in Farnsworth through Sherm soil hit rock?
Bedrock is not mapped in Farnsworth’s top five feet, but that does not rule out deeper rock. The geologic map shows the Pleistocene Blackwater Draw Formation, including sand and local clay and caliche, with Paleocene Cenozoic sedimentary rocks also mapped. A bore near FM 376 still needs its ground conditions checked as drilling proceeds.
Who approves a Farnsworth bore under FM 376?
The utility that owns the line applies for a TxDOT utility permit for work in the FM 376 right of way. The TxDOT Amarillo District reviews the RULIS application, and we provide the bore plan and profile to the utility owner. The permit sets the work conditions, including any depth that differs from the standard cover rules.
Who runs Farnsworth’s water system, and where does its water come from?
Farnsworth Water Supply Corporation owns the public water system, which draws from groundwater wells. Public records list 42 service connections serving 100 people. Before a new service near Locust Street is planned, we check the proposed path against marked utilities and confirm the line owner.
Which electric company owns a line in Farnsworth, Ochiltree County?
Southwestern Public Service and North Plains Electric Cooperative report electric service in Ochiltree County, but that does not establish who owns a line at every Farnsworth address. We confirm the specific line owner before planning an electric conduit bore near Rogers Avenue or FM 376, and the owner can confirm conduit specifications.
How far is Farnsworth from the Yukon office, and does Perryton affect the job?
Farnsworth is 222 road miles and a 4.9 hour drive from our Yukon, Oklahoma yard. Perryton is 11.0 miles northeast and is the county seat, but the Yukon distance affects crew and equipment mobilization. For work near FM 376, the route length and access also shape how we plan the bore.
How much notice does Texas811 need for a Farnsworth bore near Olds Avenue?
For work near Olds Avenue, Texas law requires a Texas811 locate request at least 48 hours before excavation starts, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days ahead. If our start moves more than 14 days past the original notice for a Texas State Highway 15 crossing, we submit a new request. Before we continue work near Olds Avenue, we have worn or moved marks refreshed through Texas811.
What affects the cost of a Farnsworth directional bore under FM 376?
The job scope determines the price, including bore length, pipe size, soil, utility exposures, pavement, pits and equipment time. Sherm clay loam can affect drilling and reaming, while an FM 376 crossing adds right of way planning. Mobilization also reflects the 222 road miles from Yukon, and emergency or high profile work may add planning needs.
Where the Farnsworth facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Farnsworth
- U.S. Census Bureau, TIGER/Line 2024: Farnsworth boundary, roads, rail lines and streams
- U.S. Census Bureau, 2020 Census: Farnsworth population count
- Macrostrat geologic map compilation: map units under Farnsworth
- U.S. EPA Safe Drinking Water Information System: public water systems serving Farnsworth
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Ochiltree County
- U.S. Geological Survey, Elevation Point Query Service: Farnsworth elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Farnsworth
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Farnsworth
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Farnsworth, Texas
Type the address of your job in Farnsworth. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Farnsworth
All counties: Texas county list.
