trinityboringsolutions.com

Spearman Texas Directional Boring: Oslo Silty Clay Loam, FM 760 and Horse Creek

Quick Answer: The Spearman Municipal Water System and electric line owners have lines in the ground already, so we confirm ownership before planning a bore under FM 760. Trinity Boring Solutions takes directional boring, also called horizontal directional drilling (HDD), work in Texas, including crossings near 7th Avenue. Spearman is 256 road miles from our Yukon, Oklahoma main office, and Horse Creek is 0.2 miles beyond the city limits. Oslo silty clay loam covers much of Spearman, so sticky clay can build on a reamer and needs staged passes.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Spearman bores at a glance

  • County seat of Hansford County, Texas. Population 2,994 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 256 miles, about 5 hours of driving.
  • Ground: Oslo soil is mapped on 59 percent of the area, with silty clay loam about 40 inches down.
  • Rock: no bedrock is mapped in the top 60 inches.
  • Highways inside the boundary: FM 760, Texas State Highway 15, Texas State Highway 207 and FM 759. State permit office: TxDOT Amarillo District.
  • Railroad track inside the boundary: none mapped.
  • Public water: Spearman Municipal Water System, groundwater wells.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Which contractor handles directional boring near Horse Creek in Spearman?

The Spearman Municipal Water System and the electric line owners are among the parties with buried lines here, so we confirm who owns each line before setting a bore path. We take directional boring work in Spearman, the Hansford County seat, where the Census Bureau Vintage 2024 estimate puts the population at 2,994. We install water, sewer, gas, electric conduit and fiber lines, including routes along Townsend Street or across a street connection.

Our main office is in Yukon, Oklahoma, and Spearman work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our family started in 1965, and we have drilled directionally since 1982. That experience covers service lines from 3/4 inch through 48 inch casing, a range suited to both a short 7th Avenue service and larger utility work in Spearman.

Ditch Witch JT922 compact directional drill beside the Trinity Boring Solutions truck at NE 24th Street in Oklahoma City
Our Ditch Witch JT922 compact directional drill beside the Trinity truck on a sleeve bore at NE 24th Street in Oklahoma City. Photos on this page are from our jobs in Oklahoma and Texas.

What is Oslo soil like to bore in Spearman?

The USDA soil survey maps Oslo soil across 59 percent of Spearman, Perryton soil across 29 percent and Sunray loam across the remaining mapped area. Surface texture is silty clay loam across 88 percent and loam across 12 percent. At about 40 inches below the surface, the survey maps silty clay loam across 88 percent and clay loam across 12 percent, with an average clay content of 34 percent. Oslo, Perryton, and Sunray soil series map patterns guide our bore planning, but they are not test borings. For a bore near Archer Street, that clay rich ground can stick to the reamer and grip pipe.

USDA soil survey, inside the Spearman city limitsWhat is mapped
Soil series mappedOslo 59 percent, Perryton 29 percent and Sunray 12 percent
Texture at the surfacesilty clay loam 88 percent and loam 12 percent
Texture about 40 inches downsilty clay loam 88 percent and clay loam 12 percent
Engineering class about 40 inches downlean clay (CL) 100 percent
Average clay content about 40 inches down34 percent
Bedrock mapped within 60 inchesNone mapped
Seasonal water table within 60 inches0 percent of the area
Flood prone soils0 percent of the area
High corrosion risk for uncoated steel29 percent of the area

The survey maps no bedrock in the top five feet, no seasonal water table within 60 inches and no flood prone soils. Rock deeper down is still possible, so the drill plan should allow for changing ground. High steel corrosion risk is mapped across 29 percent of Spearman, a reason for the line owner to review steel casing and tracer wire materials; HDPE avoids that steel corrosion concern. The Blackwater Draw Formation is Cenozoic, with sand, silt and locally clayey material, while the map also lists Cenozoic sedimentary rocks of Paleocene age. That mix calls for watching returns as the bore advances.

How do we plan a Spearman bore through silty clay loam near Horse Creek?

Spearman’s silty clay loam can cling to the reamer, while its mapped clay loam at depth adds another sticky interval. On a route near 7th Avenue, we adjust fluid and reaming to keep the hole stable without forcing pressure upward.

  1. Fluid and staged reaming: Oslo silty clay loam can cling to the reamer, so we use a thinner drilling mix and open the hole in controlled passes.
  2. Pipe timing: Clay at about 40 inches can swell around a pipe, so we prepare the pipe before the final ream and pull it through the same day.
  3. Utility exposure: We hydrovac pothole each marked line on a bore path before drilling near it; a route under Townsend Street needs depth confirmed, not just paint.
  4. Steering checks: The Blackwater Draw Formation includes sand and silt, so we track the drill head from the surface and log depth and pitch as it advances.
Open bore pit in red Oklahoma dirt with white PVC conduit stub ups and an orange safety barrier
An open bore pit in red Oklahoma dirt with PVC conduit stubbed up and a safety barrier around it.

What is in the way of a new line near FM 760 in Spearman?

FM 760 has 2.7 mapped roadway miles inside Spearman, alongside Texas State Highway 15, Texas State Highway 207 and FM 759. A line crossing any of those state roads needs a route planned around the right of way. The city has 42.05 public road centerline miles. Archer Street is the longest named street at 1.51 miles, followed by 7th Avenue at 1.49 miles and Townsend Street at 1.46 miles. A bore can pass beneath pavement without cutting those streets, but the route and utility exposures still need to be planned.

CrossingTypeMapped extentWho has a say
FM 760State highway2.7 roadway miles insideState highway office
Texas State Highway 15State highway1.3 roadway miles insideState highway office
Texas State Highway 207State highway0.8 roadway miles insideState highway office
FM 759State highway0.5 roadway miles insideState highway office
Horse CreekStream nearby0.2 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

No railroad is mapped inside Spearman or within one mile outside its limits, so there is no mapped track route to plan around. No named stream crosses the city either. Horse Creek lies 0.2 miles beyond the limits, and the mapped street crossings of named streams inside Spearman are none. If a proposed line reaches Horse Creek, we check during planning whether the crossing falls under U.S. Army Corps of Engineers jurisdiction. That creek location can affect the route and drilling plan.

Who approves a bore in Hansford County near Spearman?

Spearman is incorporated, so its city streets, including Townsend Street and 7th Avenue, belong to the city itself. FM 760 and the other state highways are different: for work in their right of way, the utility owner files the TxDOT application through RULIS, and the TxDOT Amarillo District reviews it. We prepare the bore plan and profile for that owner to submit, then work under the permit issued to the utility owner. TxDOT cover rules call for 60 inches for electric and communication lines at a highway crossing and 48 inches along the right of way. Water needs 60 inches at crossings and 36 inches along it; pressurized sewer needs 60 inches at crossings. Existing highway pavement is bored or tunneled beneath, with casing and rural travel lane coverage addressed in the permit. Horse Creek is outside the city, but any proposed creek crossing is checked for federal jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

What is already in the ground near Spearman Municipal Water System?

The local government owned Spearman Municipal Water System draws from groundwater wells and reports 1,604 service connections serving 3,172 people. That is a good reason to locate and expose water lines carefully before a route near FM 760 is drilled. Electric service reported in Hansford County comes from Southwestern Public Service, North Plains Electric Cooperative, Rita Blanca Electric Cooperative and Tri-County Electric Cooperative. We confirm the electric line owner for the specific route before planning a conduit bore.

Line ownerWhat it isSourceSize
Spearman Municipal Water SystemPublic water systemGroundwater wells1,604 connections, 3,172 people served
Southwestern Public Service, North Plains Electric Cooperative, Rita Blanca Electric Cooperative and Tri-County Electric CooperativeElectric utilities reporting service in Hansford CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

For underground work in Spearman, we treat the American Community Survey 2019 to 2023 five year estimates, with median housing year at 1972, as context, not a route condition. The estimates say 22 percent of homes were built before 1960, 68 percent from 1960 to 1999 and 10 percent in 2000 or later. Along older blocks such as Archer Street, a replacement bore may need to follow existing service routes while avoiding buried lines. We hydrovac pothole every marked utility on the bore path before drilling near it; paint shows location, not depth.

Mini excavator digging beside a pad mounted electrical transformer with red dirt spoil and a vacuum excavation trailer on site
Digging beside a pad mounted electric transformer with a vacuum excavation trailer on site.

How far is Spearman from Perryton and our Yukon yard?

Spearman is in Hansford County, covers 2.1 square miles and sits at an elevation of 3,104 feet. ZIP code 79081 covers the city, which is also the county seat. Gruver is 12.6 miles west, Waka is 10.2 miles northeast, and Perryton is 25.9 miles northeast and the nearest larger city. The Yukon yard is 256 road miles away, a 5.0 hour drive. That distance matters when planning crew mobilization for a bore near FM 760 or an outlying service route.

Places near Spearman

What would we bore near 7th Avenue in Spearman?

  • Highway crossing: A bore beneath FM 760 keeps the roadway uncut, with the line owner’s TxDOT permit plan setting the route and cover requirements.
  • Water service: A replacement connection near the Spearman Municipal Water System needs existing water lines exposed before a new service passes beneath a street.
  • Street crossing: A route under 7th Avenue can carry water, sewer or conduit while leaving the paved surface intact and exposing marked lines first.
  • Creek approach: A proposed line near Horse Creek needs a planned route and a jurisdiction check before the bore crosses the channel.
  • Fiber route: A fiber conduit along Archer Street can pass below pavement, with utility potholes setting safe separation from existing lines.
  • Acreage service: A longer route outside Spearman toward Waka can be scoped for water, power conduit or fiber based on the map pin and footage.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What drives the price of directional boring near Archer Street in Spearman?

Start with an address or map pin, especially for a route that crosses Archer Street or approaches Horse Creek. The exact location shows which streets, marked utilities and right of way may shape the bore. Tell us what goes underground, the pipe or conduit size and the footage. A sketch or plans help us check the route and prepare a useful scope for Spearman.

The ground is one price factor: Oslo silty clay loam can stick to tooling, and staged reaming may be needed. Crossings matter too, including pavement on FM 760, exposed utilities and any creek approach near Horse Creek. Logistics are another group; Spearman is 256 road miles from Yukon. Pipe size, bore length, pits, excavator time, sand backfill, concrete, emergency timing and mobilization all depend on the specific route and work plan.

Questions people ask about boring in Spearman

Does Trinity take directional boring jobs in Spearman and Hansford County?

Yes. We take directional boring work across Texas, including Spearman and Hansford County. Our own crews and vetted partner drilling contractors can staff the work from satellite yards, while Trinity handles the job from the first call through the bore log. A route near FM 760 or Townsend Street is planned for its specific access and utility conditions.

Who owns electric lines in Hansford County near Spearman, and who confirms conduit specs?

Electric service reporting in Hansford County includes Southwestern Public Service, North Plains Electric Cooperative, Rita Blanca Electric Cooperative and Tri-County Electric Cooperative. Those records do not identify the provider for every Spearman address. Confirm the owner at the specific route and check conduit requirements with that owner before planning work near the Spearman Municipal Water System.

Does Spearman or Hansford County control a cut across Townsend Street?

Spearman is incorporated, so Townsend Street is a city street, not a county street. A directional bore can pass beneath it without cutting the pavement. Before the drill approaches the route, marked utilities are exposed so their depth is known; paint at Townsend Street shows a line’s location, not how deep it sits.

How do Spearman homes near 7th Avenue affect replacement bores?

The American Community Survey 2019 to 2023 estimates give Spearman a median housing year of 1972, with 22 percent of homes built before 1960. Older blocks near 7th Avenue may have existing services that need replacement, while newer connections need their own route. We expose marked utilities before the drill gets near them.

Does Oslo soil in Spearman corrode steel, and what pipe should we use?

The USDA soil survey maps high steel corrosion risk across 29 percent of Spearman, including mapped Oslo soil areas. The line owner should review the materials for steel casing and tracer wire and select any coating. At an FM 760 crossing in Spearman, we can use HDPE without the steel corrosion concern. Soil mapping guides planning but is not a site specific test.

What ground does a bore go through in Spearman’s Oslo soil?

The USDA soil survey maps Oslo soil across 59 percent of Spearman. At about 40 inches below the surface, 88 percent of the mapped area is silty clay loam and 12 percent is clay loam; the average clay content is 34 percent. That sticky ground can load the reamer, so staged passes and fluid control matter.

Does Trinity cover Waka and rural sites outside Spearman?

Yes. We take work in Texas beyond Spearman, including routes toward Waka, which is 10.2 miles northeast, and other rural sites. The map pin and scope help us plan crew travel, access and the bore path. A route outside city limits may still involve a state highway or a marked utility that needs planning.

How much Texas811 notice do I need for a bore near Archer Street in Spearman?

Texas811 needs the locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before work. If a bore near Archer Street starts more than 14 days after the original notice, make a new request. If marks wear away or move, have them refreshed through Texas811 before work continues.

What affects directional boring cost near FM 760 in Spearman?

The route and scope drive the price, not one fixed factor. Oslo silty clay loam, pipe size and bore length affect drilling; pavement or a crossing near FM 760 adds planning. Utility exposures, pits, excavator time, backfill, emergency timing and mobilization also count. Spearman is 256 road miles from the Yukon yard, which affects travel planning.

Where the Spearman facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Spearman

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Spearman, Texas

Type the address of your job in Spearman. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Spearman

All counties: Texas county list.