trinityboringsolutions.com

Gruver Texas Directional Boring: Sherm Soil, FM 278 and Farwell Creek

Quick Answer: In Gruver, the top five feet are mapped mostly as silty clay loam, with clay loam below; a bore near Farwell Creek needs careful control of the hole and channel profile. We do directional boring, also called horizontal directional drilling (HDD), for crossings on FM 278 and around town. The Yukon yard is 270 road miles away, with FM 278 routes affecting mobilization. The Ogallala Formation lies beneath the mapped soils.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Gruver bores at a glance

  • Incorporated city in Hansford County, Texas. Population 1,068 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 270 miles, about 5.4 hours of driving.
  • Ground: Sherm soil is mapped on 50 percent of the area, with clay loam about 40 inches down.
  • Rock: no bedrock is mapped in the top 60 inches.
  • Highways inside the boundary: FM 278, Texas State Highway 136 and Texas State Highway 15. State permit office: TxDOT Amarillo District.
  • Railroad track inside the boundary: none mapped.
  • Named streams inside the boundary: Farwell Creek.
  • Public water: Gruver Municipal Water System, groundwater wells.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Which contractor handles directional boring on FM 278 in Gruver?

Gruver is an incorporated city in Hansford County, with 1,068 residents in the Census Bureau Vintage 2024 estimate. We bore water, sewer, gas, electric conduit and fiber routes beneath Main Avenue, Cooper Avenue and FM 278, where open cuts could disrupt street access. Each route needs a plan matched to existing lines and crossings.

Our main office is in Yukon, Oklahoma, and Gruver work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our longest bore ran roughly 4,100 feet with 48 inch pipe under the Arkansas River in Tulsa. Beside that reach, a Gruver job may be a shorter service crossing near Main Avenue. Trinity is a family business started in 1965 and has done directional boring since 1982.

Compact Ditch Witch drill rig boring a new utility line across a front yard on a residential street in Edmond, Oklahoma
Our compact Ditch Witch drill boring a new utility line across a front yard on a residential street in Edmond, Oklahoma. Photos on this page are from our jobs in Oklahoma and Texas.

What kind of ground does Gruver’s Sherm soil indicate?

The USDA soil survey maps Sherm silty clay loam across 50 percent of Gruver, with Oslo silty clay loam and Sunray loam making up the rest. At the surface, 88 percent of the mapped area is silty clay loam and 12 percent is loam. About 40 inches down, the survey maps clay loam under 62 percent and silty clay loam under 38 percent of the area. Average clay content at that depth is 34 percent, and no sandy area is mapped there. We treat mapped Sherm, Oslo, and Sunray soil patterns as planning context, not as substitutes for test borings in Gruver. Sherm clay can stick to a reamer, so the drilling fluid and reaming sequence matter.

USDA soil survey, inside the Gruver city limitsWhat is mapped
Soil series mappedSherm 50 percent, Oslo 38 percent and Sunray 12 percent
Texture at the surfacesilty clay loam 88 percent and loam 12 percent
Texture about 40 inches downclay loam 62 percent and silty clay loam 38 percent
Engineering class about 40 inches downlean clay (CL) 100 percent
Average clay content about 40 inches down34 percent
Bedrock mapped within 60 inchesNone mapped
Seasonal water table within 60 inches0 percent of the area
Flood prone soils0 percent of the area
High corrosion risk for uncoated steel50 percent of the area

Bedrock is not mapped within the top five feet in Gruver, but the geologic map shows the Ogallala Formation, a Pliocene unit of sand, silt, clay, gravel and caliche below. That does not rule out deeper rock, so the bore plan still needs to allow for changing material. The USDA soil survey maps no seasonal water table or flood prone soils here, which reduces those mapped concerns near Farwell Creek. High steel corrosion risk covers 50 percent of the area; the line owner should consider casing and tracer wire materials, while HDPE is not affected by soil corrosion.

How do crews handle Gruver’s clay loam?

The USDA soil survey maps clay loam under much of Gruver at about 40 inches. Sherm silty clay loam can cling to the reamer, so we control fluid, open the hole in stages and keep the pullback ready.

  1. Fluid control: Sherm silty clay loam can cling to the reamer, so we use thinner fluid and polymer to help keep the hole workable.
  2. Staged reaming: With clay loam mapped beneath 62 percent of Gruver at about 40 inches, we enlarge the path in steps and watch fluid returns.
  3. Pullback timing: Clay can grip the pipe as it swells, so near Main Avenue we have the pipe ready and pull it after opening the hole.
  4. Utility exposure: Near the Gruver Municipal Water System or an electric route, we hydrovac pothole each marked line before drilling close to it. The locator shows position, not depth.
Reel of 4 inch HDPE conduit on the exit side of a 385 foot directional bore under creeks and wetland in Guthrie, Oklahoma
A reel of 4 inch HDPE conduit on the exit side of a 385 foot bore under creeks and wetland in Guthrie, Oklahoma.

What does a bore have to cross in Gruver near Farwell Creek?

FM 278, Texas State Highway 136 and Texas State Highway 15 run inside Gruver, with 1.4 mapped roadway miles of FM 278 in the city. Main Avenue is the longest named street at 0.92 miles, followed by Cooper Avenue at 0.91 miles and McCree Avenue at 0.85 miles. A route under one of those roads needs a bore profile that accounts for pavement and nearby marked utilities. The mapped road network gives several possible corridors, but the exact address sets the path.

CrossingTypeMapped extentWho has a say
FM 278State highway1.4 roadway miles insideState highway office
Texas State Highway 136State highway1.2 roadway miles insideState highway office
Texas State Highway 15State highway1.2 roadway miles insideState highway office
Farwell CreekStream0.31 channel miles insideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

No railroad is mapped inside Gruver or within one mile outside the city limits, and none of the mapped street and rail crossings is present. Farwell Creek runs 0.31 channel miles through the city, with one mapped street crossing of a named stream. A bore near that crossing needs a planned profile that stays below the channel. No lakes or ponds are mapped within one mile, and the creek crossing should be checked for U.S. Army Corps of Engineers jurisdiction during planning.

Whose permission does a Gruver bore in Hansford County need?

For work beneath Main Avenue or another city street, Gruver is incorporated, so the street belongs to the city; no city department or permit form is assumed here. A bore within the right of way of FM 278, Texas State Highway 136 or Texas State Highway 15 needs a TxDOT utility permit. The line owner files through TxDOT’s online RULIS system, and the TxDOT Amarillo District reviews it. We prepare the bore plan and profile for the owner’s application and work under its permit. For crossings beneath Texas State Highway 136 pavement in Gruver, we follow TxDOT rules calling for boring or tunneling. Required cover depends on line type and route: crossings generally need 60 inches, while right of way runs have different minimums. Farwell Creek is checked for Corps jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Which utilities are near the Gruver Municipal Water System?

The Gruver Municipal Water System uses groundwater wells and serves 1,130 people through 718 service connections. Those figures help frame a route near the water system, but the specific line owner still needs confirmation. Southwestern Public Service, North Plains Electric Cooperative, Rita Blanca Electric Cooperative and Tri County Electric Cooperative report electric service in Hansford County. We confirm the owner for the address before planning an electric conduit bore, then use hydrovac potholing to expose marked lines near the water system and proposed electric route.

Line ownerWhat it isSourceSize
Gruver Municipal Water SystemPublic water systemGroundwater wells718 connections, 1,130 people served
Southwestern Public Service, North Plains Electric Cooperative, Rita Blanca Electric Cooperative and Tri-County Electric CooperativeElectric utilities reporting service in Hansford CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates place Gruver’s median housing year at 1971, which we consider when planning underground routes. In Gruver, the survey estimates 30 percent of homes were built before 1960, 62 percent from 1960 to 1999, and 8 percent in 2000 or later, context for our underground planning. Those ages can point to replacement work, but they do not date the buried lines on Cooper Avenue or elsewhere. Before the drill approaches a marked utility, we expose it with hydrovac; paint shows where a line runs, not its depth.

Trinity Boring Solutions crew running a 2 inch conduit directional bore with airport hangars and a parked jet in the background in Oklahoma City
Our crew running a 2 inch conduit bore near the hangars at an Oklahoma City airport.

Do you cover Gruver and nearby Morse?

Gruver is in Hansford County at an elevation of 3,168 feet and covers 1.1 square miles. Its ZIP code is 79040. Spearman, the county seat, is 12.6 miles east; Morse is 14.0 miles south, and Waka is 20.3 miles east. Perryton, the nearest larger city, is 35.1 miles east. From the Yukon, Oklahoma yard, Gruver is 270 road miles away and a 5.4 hour drive. That distance matters to mobilization, so the route, access and scope near FM 278 help shape the plan.

Places near Gruver

What would we bore near Main Avenue in Gruver?

  • Highway crossing: A bore beneath FM 278 follows a planned profile and the TxDOT permit issued to the line owner.
  • Water service: A route near the Gruver Municipal Water System needs the existing line exposed before the drill approaches it.
  • Street replacement: A water or sewer bore under Cooper Avenue can place a replacement line without opening the street along its route.
  • Fiber conduit: A conduit route beneath Main Avenue can avoid cutting the pavement while connecting the planned endpoints.
  • Creek crossing: A bore near Farwell Creek needs a profile beneath the channel and a check for Corps jurisdiction.
  • Airport service: A proposed utility route near Gruver Municipal Airport needs a site specific path and marked line exposures.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What drives the price of a Gruver bore near King Avenue?

For a quote near King Avenue, start with the address or map pin, then tell us what goes underground. A water line near the Gruver Municipal Water System is different from fiber conduit along Main Avenue. Include the pipe or conduit size and the footage; a sketch or plans help us see the route and crossings.

A short, clear route through Sherm soil with few marked utilities is simpler to plan than a route with several exposures or pavement crossings. Length, pipe size, soil, utilities to cross, pavement, pits, excavator time and backfill all affect the scope. A crossing beneath FM 278 brings TxDOT permit planning into the job, while Farwell Creek adds channel and jurisdiction checks. The 270 road miles from Yukon’s main office shape how we plan mobilization for boring work in Gruver. High profile or emergency boring near Farwell Creek can add planning demands, so we account for that in Gruver schedules.

Questions people ask about boring in Gruver

Does Trinity Boring Solutions take directional boring work in Gruver and Hansford County?

Yes. Trinity takes directional boring work in Gruver and across Texas, with the job staffed by our own crews or a partner contractor from a vetted satellite yard. You work with Trinity from the first call through the bore log, whether the route is near FM 278 or elsewhere in Hansford County.

Do older homes around Cooper Avenue mean old lines need replacement bores in Gruver?

They can make replacement work worth considering, but housing age does not establish the age of a buried line. The American Community Survey 2019 to 2023 five year estimates put Gruver’s median housing year at 1971, with 30 percent of homes built before 1960. A Cooper Avenue route still needs utility locating and potholing before drilling.

Does Sherm soil in Gruver corrode steel, and what pipe can a bore use?

The USDA soil survey maps high steel corrosion risk across 50 percent of Gruver, including areas mapped as Sherm silty clay loam. The line owner should consider suitable material or coatings for steel casing and tracer wire. HDPE is not affected by soil corrosion, but the owner selects the pipe for the route and service.

What ground does a bore pass through in Gruver’s Sherm soil?

Sherm silty clay loam covers 50 percent of Gruver in the USDA soil survey. At about 40 inches, clay loam is mapped under 62 percent of the area and silty clay loam under 38 percent. That clay can cling to the reamer, so staged reaming and controlled drilling fluid help manage the hole.

Will a directional bore in Gruver hit rock below the mapped soil?

Bedrock is not mapped in the top five feet in Gruver, but that does not rule out rock deeper down. The geologic map shows the Pliocene Ogallala Formation, which includes sand, silt, clay, gravel and caliche. A bore near Farwell Creek still needs a field profile that can account for changing material.

Who approves a bore beneath FM 278 in Gruver?

The line owner applies for a TxDOT utility permit through the online RULIS system, and the TxDOT Amarillo District reviews work on FM 278. We prepare the bore plan and profile for the owner’s filing and work under the permit issued to that owner. The approved plan sets the route and cover requirements.

How far is Gruver from Trinity’s Yukon office, and does Perryton change the job?

Gruver is 270 road miles and a 5.4 hour drive from the Yukon, Oklahoma yard. Perryton is 35.1 miles east of Gruver, but the job location and access determine the route and mobilization. A bore along FM 278 still needs its own scope, utility exposures and any required highway permit.

How much notice does Texas811 need for a bore near Main Avenue in Gruver?

For a Main Avenue excavation, request a Texas811 locate at least 48 hours ahead, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before work starts. Texas811 describes this as at least two working days. If the start slips more than 14 days past the notice, submit a new request; have worn or moved marks refreshed before work continues.

What affects the cost of a directional bore near FM 278 in Gruver?

The job details set the price: bore length, pipe or conduit size, Sherm soil, marked utilities, pavement, pits, excavator time and backfill all matter. A route beneath FM 278 also brings TxDOT permit planning, while a nearby Farwell Creek crossing adds profile and jurisdiction checks. The 270 road miles from Yukon affect mobilization.

Where the Gruver facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Gruver

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Gruver, Texas

Type the address of your job in Gruver. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Gruver

All counties: Texas county list.