Fort Hancock Texas Directional Boring: Glendale Soil, Interstate 10, Hudspeth Main Canal
Quick Answer: Along Hudspeth Main Canal, Trinity Boring Solutions does directional boring, also called horizontal directional drilling (HDD), in Fort Hancock, Texas. From our Yukon, Oklahoma main office, Fort Hancock is 679 road miles away, and our crews and vetted drilling partners staff work near Interstate 10. Glendale soil covers 56 percent of the mapped area, with silty clay loam about 40 inches down. That clay can hold the hole open but may cling to the reamer and pipe.
Fort Hancock bores at a glance
- Unincorporated community in Hudspeth County, Texas. Population 1,052 (2020 Census count).
- Road distance from our Yukon, Oklahoma main office: 679 miles, about 12.7 hours of driving.
- Ground: Glendale soil is mapped on 56 percent of the area, with silty clay loam about 40 inches down.
- Rock: no bedrock is mapped in the top 60 inches.
- Highways inside the boundary: Interstate 10, Texas State Highway 20 and Spur 148. State permit office: TxDOT El Paso District.
- Railroad track inside the boundary: Union Pacific, with 2 mapped street and rail crossings.
- Named streams inside the boundary: Hudspeth Main Canal, Río Grande, Arroyo Diablo and Camp Rice Arroyo.
- Public water: Fort Hancock Water Control and Improvement District, groundwater wells.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Who handles directional boring near the Hudspeth Main Canal in Fort Hancock?
Fort Hancock is 679 road miles from our Yukon, Oklahoma main office, and we arrange the work with our own crews and vetted drilling partners. The Census Bureau counted 1,052 people here in the 2020 Census. Fort Hancock is an unincorporated community in Hudspeth County, so it has no city government. We install water, sewer, gas, electric conduit and fiber lines, including routes along 5th Street or near Hudspeth Main Canal.
Our main office is in Yukon, Oklahoma, and Fort Hancock work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. For jobs near Interstate 10, our range runs from 3/4 inch service lines to 48 inch casing and from 10 feet to 5,000 feet long. Our family business began in 1965, and we have done directional boring since 1982, including planning for utility crossings in Fort Hancock.

What does the soil survey show under Fort Hancock and Glendale soil?
The USDA soil survey maps Glendale soil series across 56 percent of Fort Hancock and Copia across 40 percent. At about 40 inches below the surface, silty clay loam is mapped under 56 percent of the area. Loamy fine sand covers 30 percent, sand covers 9 percent and very gravelly loamy sand covers 3 percent at that depth. The survey also maps 43 percent of the area as sandy at about 40 inches. These are mapped patterns, not test borings, so a route near 5th Street still needs site specific planning.
| USDA soil survey, inside the Fort Hancock mapped community boundary | What is mapped |
|---|---|
| Soil series mapped | Glendale 56 percent, Copia 40 percent and Queencreek 3 percent |
| Texture at the surface | silt loam 56 percent, fine sand 30 percent and sand 9 percent |
| Texture about 40 inches down | silty clay loam 56 percent, loamy fine sand 30 percent and sand 9 percent |
| Engineering class about 40 inches down | lean clay (CL) 56 percent, silty sand (SM) 30 percent and sand with silt (SP SM) 9 percent |
| Average clay content about 40 inches down | 18 percent |
| Bedrock mapped within 60 inches | None mapped |
| Seasonal water table within 60 inches | 0 percent of the area |
| Flood prone soils | 59 percent of the area |
| High corrosion risk for uncoated steel | 57 percent of the area |
Bedrock is not mapped in the top five feet of Fort Hancock, though the geologic map identifies Alluvium from the Holocene along streams. That map unit includes sand, silt, clay and gravel, so conditions can change along Hudspeth Main Canal. A seasonal water table is not mapped within 60 inches, but flood prone soils cover 59 percent of the area, making channel depth a planning issue. High steel corrosion risk is mapped across 57 percent, so the line owner should weigh casing and tracer wire materials; HDPE avoids that steel concern.
What does it take to bore Fort Hancock silty clay loam?
The USDA survey maps both silty clay loam and sandy ground around Fort Hancock. Near 5th Street or Hudspeth Main Canal, we plan the drilling fluid and reaming to match the route, then track the head and log its depth and pitch.
- Where silty clay loam is mapped near 5th Street, we use a thinner drilling fluid and ream in stages to limit sticky buildup on the reamer.
- Glendale soil can hold an open hole, so we plan the pipe pull for the same work window after opening the bore.
- The USDA survey also maps sandy ground in Fort Hancock; staged reaming and a prepared pipe help limit collapse behind the drill head.
- For a route near flood prone soils along Hudspeth Main Canal, we plan depth beneath the channel and track the drill head from the surface.

Could a bore near 5th Street cross roads, tracks or creeks in Fort Hancock?
Interstate 10 runs 17.6 mapped roadway miles inside the Fort Hancock community boundary. Texas State Highway 20 has 8.1 miles there, and Spur 148 has 1.3 miles. Among named streets, 5th Street runs 2.63 miles, Knox Avenue 2.45 miles and 3rd Street 1.07 miles. A bore beneath existing highway pavement must go by boring or tunneling, rather than an open cut. Rural highway crossings must extend beneath all travel lanes, so the route and bore plan matter before work starts.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| Interstate 10 | Interstate | 17.6 roadway miles inside | State highway office |
| Texas State Highway 20 | State highway | 8.1 roadway miles inside | State highway office |
| Spur 148 | State highway | 1.3 roadway miles inside | State highway office |
| Union Pacific | Railroad | 8.63 track miles inside | The railroad |
| Hudspeth Main Canal | Stream | 7.93 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Río Grande | Stream | 7.69 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Arroyo Diablo | Stream | 2.48 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Camp Rice Arroyo | Stream | 1.81 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Diablo Arroyo | Stream nearby | 0.6 miles outside | Checked for Corps of Engineers jurisdiction |
Union Pacific has 8.63 track miles inside the community, and public mapping shows 2 street and rail crossings. The railroad agreement governs the crossing details, so the track owner’s requirements need to be included in the plan. Hudspeth Main Canal runs 7.93 channel miles here, and the Río Grande runs 7.69. Arroyo Diablo and Camp Rice Arroyo add 2.48 and 1.81 channel miles. Public mapping shows 26 street crossings of named streams, a reason to check each proposed route; no lakes or ponds are mapped within one mile.
Whose permission does a Fort Hancock bore in Hudspeth County need?
Fort Hancock is unincorporated, so its streets have no city government to issue permits; the authority depends on the road or crossing. For work in Interstate 10, Texas State Highway 20 or Spur 148 right of way, the line owning utility files through TxDOT’s RULIS system. The TxDOT El Paso District reviews it, while we prepare the bore plan and profile and work under the utility owner’s permit. Cover requirements depend on the line: electric and communications need 60 inches at a highway crossing, and water also needs 60 inches. A Union Pacific track crossing requires an agreement with the railroad. A crossing of Hudspeth Main Canal is checked for federal waterway jurisdiction during planning.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
What lines are already in the ground in Fort Hancock, Hudspeth County?
The Fort Hancock Water Control and Improvement District gets its water from groundwater wells and reports 376 service connections serving 1,800 people. For an electric conduit bore, the line owner must be confirmed for the address. El Paso Electric and Rio Grande Electric Cooperative report electric service in Hudspeth County, but that does not identify the provider at every 5th Street address.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| Fort Hancock Water Control and Improvement District | Public water system | Groundwater wells | 376 connections, 1,800 people served |
| El Paso Electric and Rio Grande Electric Cooperative | Electric utilities reporting service in Hudspeth County | EIA Form 861 | Confirm the line owner by address |
The 2019 to 2023 five year estimates put Fort Hancock’s median housing year at 1985, context we consider when planning underground utility work. The survey estimates 89 percent of homes were built from 1960 to 1999 and 11 percent in 2000 or later. That mix can mean replacing existing lines as well as adding services near 3rd Street. We hydrovac pothole each marked utility on the bore path before drilling near it, because locate paint shows position, not depth. For a proposed line under 5th Street, marked utilities along the actual bore path need exposure first.

How far is Fort Hancock from Tornillo and other nearby places?
Fort Hancock is in Hudspeth County at an elevation of 3,534 feet, and its mapped community area covers 18.95 square miles. ZIP code 79839 serves the community. Acala is 4.6 miles northwest, Tornillo is 18.3 miles northwest and Fabens is 23.5 miles northwest. Fabens is the nearest larger city, while Sierra Blanca, the county seat, is 30.7 miles east. Our Yukon, Oklahoma yard is 679 road miles away, a 12.7 hour drive. That distance is part of planning mobilization for work near Interstate 10.
Places near Fort Hancock
- Directional boring in Acala: 4.6 miles northwest
- Directional boring in Tornillo: 18.3 miles northwest
- Directional boring in Fabens: 23.5 miles northwest
- Directional boring in Morning Glory: 28.7 miles northwest
- Agua Dulce: 30.6 miles northwest
What boring work comes up near 3rd Street in Fort Hancock?
- Highway crossing: A bore under Interstate 10 needs to stay beneath the travel lanes, with its plan shaped by the TxDOT right of way.
- Water service: A connection near 5th Street can be routed without opening the street, with the water district line identified first.
- Fiber conduit: A run along 3rd Street needs marked utilities exposed where the planned bore passes them.
- Rail crossing: A route beneath Union Pacific track needs the railroad agreement and its crossing conditions built into the plan.
- Canal crossing: A bore beneath Hudspeth Main Canal needs channel depth planning and a jurisdiction check during planning.
- Drainage crossing: A route near Arroyo Diablo needs attention to the channel and the mapped flood prone soils.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What drives the price of a Fort Hancock bore near Interstate 10?
For a route near Interstate 10, start with the address or map pin. Tell us what goes in the ground, such as a water line or fiber conduit, then give the pipe or conduit size and footage. A sketch or plans help show whether the route reaches 5th Street, Union Pacific track or Hudspeth Main Canal.
The route sets the work: Glendale soil and sandy layers affect drilling and reaming, while crossings of Interstate 10, Union Pacific track or Hudspeth Main Canal add planning and exposure needs. Price also reflects line size, bore length, pavement, concrete, drainage crossings, pits, excavator time and sand backfill. At 679 road miles from Yukon, mobilization is another part of the scope. High profile or emergency work can change the equipment and schedule needed.
Questions people ask about boring in Fort Hancock
Does Trinity Boring Solutions take directional boring jobs in Fort Hancock, Hudspeth County?
Yes. We take directional boring work in Fort Hancock and staff it with our own crews or vetted drilling partners, while Trinity remains your contact from the first call through the bore log. For work near Hudspeth Main Canal, we plan around the route and ground rather than assuming conditions are the same across the community.
Can Fort Hancock Glendale soil corrode steel, and what pipe should I use?
The USDA soil survey maps high steel corrosion risk across 57 percent of Fort Hancock. The line owner should consider that when selecting steel casing or tracer wire materials. HDPE does not have the same soil corrosion concern. The Glendale soil map describes ground patterns, not a test of the exact route, so the material choice should reflect the actual installation.
What ground will a bore pass through in Fort Hancock Glendale soil?
Glendale soil is mapped across 56 percent of the community. At about 40 inches down, the USDA survey maps silty clay loam under 56 percent of the area, with sandy textures also present. Clay can hold the bore open but may stick to the reamer, while sand can cave behind the bit. A route near 5th Street needs planning for the mapped conditions along its path.
Could a directional bore in Fort Hancock encounter rock below the mapped area?
With no bedrock mapped in Fort Hancock’s top five feet, we still account for the possibility of deeper rock when planning a bore. The geologic map shows Holocene Alluvium along streams, made up of sand, silt, clay and gravel. For a bore near Hudspeth Main Canal, the route still needs to be assessed for changing ground rather than treating the map as a site test.
Who approves a bore under Interstate 10 in Fort Hancock?
For work in Interstate 10 right of way, the utility that owns the line applies through TxDOT’s RULIS system, and the TxDOT El Paso District reviews the application. For a Fort Hancock crossing, we prepare the bore plan and profile for the utility owner and work under its permit. The permit sets the approved route and may set a different cover depth.
Who owns the Fort Hancock Union Pacific track, and what does a bore need?
Union Pacific owns the mapped track through Fort Hancock, with 8.63 track miles inside the community boundary. A bore beneath it needs an agreement with the railroad, whose crossing conditions govern the work. Where the route also uses highway right of way, TxDOT asks for a copy of that agreement.
How much notice does Texas811 need for a Fort Hancock bore near 5th Street?
For a bore near 5th Street, Texas law requires a locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days ahead. Texas811 describes that notice period as at least two working days, which we account for when scheduling underground work in Fort Hancock. If the start slips more than 14 days past the original notice, make a new request; worn or moved marks must be refreshed through Texas811 before work continues.
Does Fort Hancock’s distance from Fabens affect a job from Yukon?
Fabens is 23.5 miles northwest of Fort Hancock, while our Yukon, Oklahoma main office is 679 road miles away. The longer mobilization from Yukon can affect the job scope. We coordinate the work with our crews and vetted drilling partners, and you continue working with Trinity whichever crew is on site.
What affects the cost of a directional bore in Fort Hancock near Interstate 10?
The job details set the price, including bore length, line size, ground, crossings, pavement, pits and equipment time. Glendale soil and sandy layers can affect drilling needs. A crossing under Interstate 10 or Union Pacific track adds planning, and Hudspeth Main Canal can make drainage depth part of the route. Mobilization from Yukon also matters for this location.
Where the Fort Hancock facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Fort Hancock
- U.S. Census Bureau, TIGER/Line 2024: Fort Hancock boundary, roads, rail lines and streams
- U.S. Census Bureau, 2020 Census: Fort Hancock population count
- U.S. Census Bureau, American Community Survey 2019 to 2023: Fort Hancock housing units and year built
- Macrostrat geologic map compilation: map units under Fort Hancock
- U.S. EPA Safe Drinking Water Information System: public water systems serving Fort Hancock
- U.S. Department of Transportation, North American Rail Network: track owners in Hudspeth County
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Hudspeth County
- U.S. Geological Survey, Elevation Point Query Service: Fort Hancock elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Fort Hancock
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Fort Hancock
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Fort Hancock, Texas
Type the address of your job in Fort Hancock. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Fort Hancock
Same county: Sierra Blanca · Dell City. All counties: Texas county list.
