trinityboringsolutions.com

Gardendale Texas Directional Boring: Faskin Soil, FM 554 and Cottonwood Road

Quick Answer: Need to get a utility beneath Cottonwood Road without opening the pavement? Trinity Boring Solutions takes directional boring, also called horizontal directional drilling (HDD), work in Gardendale for routes beneath FM 554 and local streets. Our Yukon, Oklahoma main office is 449 road miles away, and FM 554 access shapes mobilization and staging. Faskin soil covers 47 percent of the mapped area, while sandy clay loam at about 40 inches calls for controlled fluid and staged reaming.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Gardendale bores at a glance

  • Unincorporated community in Ector County, Texas. Population 2,020 (2020 Census count).
  • Road distance from our Yukon, Oklahoma main office: 449 miles, about 8.9 hours of driving.
  • Ground: Faskin soil is mapped on 47 percent of the area, with sandy clay loam about 40 inches down.
  • Rock: no bedrock is mapped in the top 60 inches.
  • Highways inside the boundary: FM 554 and Texas State Highway 158. State permit office: TxDOT Odessa District.
  • Railroad track inside the boundary: none mapped.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who does directional boring on Cottonwood Road in Gardendale?

Can we put your line beneath Cottonwood Road without opening the road? Yes, we take water, sewer, gas, electric conduit and fiber bores in Gardendale, an unincorporated community in Ector County, routing lines beneath Cottonwood Road or toward FM 554 where the alignment calls for it. The Census Bureau’s 2020 Census count is 2,020; it does not publish yearly estimates for unincorporated places such as Gardendale.

Our main office is in Yukon, Oklahoma, and Gardendale work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. We have gone more than 25 years without a utility strike, a record that matters near lines reported by Oncor Electric Delivery Company and Southwestern Public Service in Ector County. Our family business began in 1965 and has done directional boring since 1982, including work planned around Cottonwood Road access.

Trinity Boring Solutions branded compact directional drilling unit positioned beside a tree on a red dirt jobsite
Our compact directional drill set up beside a tree on a tight site. Photos on this page are from our jobs in Oklahoma and Texas.

What does the soil survey show beneath Gardendale’s Faskin soil?

The USDA soil survey maps Faskin soil across 47 percent of Gardendale, most often in the Faskin and Douro association. Surface texture is mapped as fine sandy loam in 47 percent of the area and loam in 44 percent. About 40 inches down, sandy clay loam is mapped under 50 percent, very gravelly loam under 35 percent and clay loam under 9 percent. The mapped average clay content at that depth is 25 percent. These are mapped soil patterns, not test borings, so the route still needs a site specific plan.

USDA soil survey, inside the Gardendale mapped community boundaryWhat is mapped
Soil series mappedFaskin 47 percent, Kimbrough 35 percent, Ratliff 9 percent, Stegall 4 percent and Triomas 3 percent
Texture at the surfacefine sandy loam 47 percent, loam 44 percent and clay loam 4 percent
Texture about 40 inches downsandy clay loam 50 percent, very gravelly loam 35 percent and clay loam 9 percent
Engineering class about 40 inches downlean clay (CL) 59 percent, clayey gravel (GC) 35 percent and clayey sand (SC) 3 percent
Average clay content about 40 inches down25 percent
Bedrock mapped within 60 inchesNone mapped
Seasonal water table within 60 inches0 percent of the area
Flood prone soils0 percent of the area
High corrosion risk for uncoated steel0 percent of the area

The USDA soil survey does not map bedrock in the top five feet of Gardendale, but deeper rock is still possible. It also maps no seasonal water table within 60 inches and no flood prone soils, which lowers the mapped concern for wet pits or channel flooding. High steel corrosion risk is not mapped, though the line owner chooses any coating for steel casing or tracer wire. The geologic map shows the Blackwater Draw Formation, a Cenozoic unit of sand, fine alluvium and silt; Cenozoic sedimentary rocks of Paleocene age are also mapped. Gravelly patches can affect steering, so crews track the drill carefully.

How do crews handle Gardendale’s sandy clay loam?

Gardendale’s sandy clay loam and very gravelly mapped soils call for a plan that keeps the hole stable without pushing fluid into nearby pavement. We adjust the reaming and fluid approach to the route and the material at depth.

  1. In sandy clay loam mapped under 50 percent of Gardendale, we use controlled fluid and staged reaming to keep the hole open without washing soft material away.
  2. Where the soil survey maps very gravelly loam under 35 percent, we check depth and pitch at each drill rod to hold the line near Cottonwood Road.
  3. Before drilling near Goldenrod Drive, we hydrovac expose each marked utility on the route because surface paint gives position, not burial depth.
  4. At FM 554 pavement, we set pits in dirt beyond the road surface and track the drill head from above, logging depth and pitch as it advances.
6 inch Schedule 40 PVC sleeve in a bore pit in sandy soil on a water main crossing at NE 24th Street, Oklahoma City
A 6 inch Schedule 40 PVC sleeve in a bore pit in sandy soil on a water main crossing in Oklahoma City.

What is in the way of a new line near Cottonwood Road in Gardendale?

FM 554 runs 6.1 mapped roadway miles inside the Gardendale community boundary, and Texas State Highway 158 runs 3.4 miles. Loop 338 is 1.0 mile outside that boundary. Cottonwood Road is the longest named local street at 4.08 miles, followed by Goldenrod Drive at 3.39 miles and Small Dent Road at 3.02 miles. A route beneath these roads needs its entry and exit pits placed off the pavement. TxDOT rules call for boring or tunneling beneath existing highway pavement, and rural highway bores extend beneath all travel lanes.

CrossingTypeMapped extentWho has a say
FM 554State highway6.1 roadway miles insideState highway office
Texas State Highway 158State highway3.4 roadway miles insideState highway office
Loop 338Highway nearby1 miles outsideState highway office
Swipe the table sideways to see every column.

No railroad is mapped inside Gardendale or within one mile outside the community boundary, and no street and rail crossings are mapped. No named streams or lakes are mapped inside or within one mile, though the area has 6.64 miles of unnamed drainage. That means a route near a drainage line needs its alignment checked on site rather than assumed clear from the mapped stream inventory. The mapped street crossing inventory also shows no crossings of named streams.

Who approves a bore in Gardendale and Ector County?

Gardendale is an unincorporated community with no city government, so its local streets fall to Ector County rather than a city hall. FM 554 and Texas State Highway 158 are state highways, so a bore in their right of way needs a TxDOT utility permit reviewed by the TxDOT Odessa District. The utility owner, not the drilling contractor, files through TxDOT’s RULIS system; we prepare the bore plan and profile for the utility owner’s application. On those highways, the permit’s cover depth sets the bore profile. TxDOT rules specify 60 inches at crossings for electric and communication lines, 60 inches for water, and 60 inches for pressurized sewer, subject to district direction. No railroad crossing is mapped in Gardendale.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Who owns the utility lines in Gardendale and Ector County?

The water provider for a specific Gardendale address has to be confirmed with Ector County or the local water district before a bore is planned. EPA drinking water records do not tie a water system to the community by name, so the provider cannot be matched from those records. Oncor Electric Delivery Company and Southwestern Public Service report electric service in Ector County, but either may not serve every address. We confirm the actual line owner before planning a conduit bore near Cottonwood Road.

Line ownerWhat it isSourceSize
Oncor Electric Delivery Company and Southwestern Public ServiceElectric utilities reporting service in Ector CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Gardendale’s median housing year at 1999. The estimates show 13 percent of homes built before 1960, 39 percent built from 1960 to 1999 and 48 percent built in 2000 or later. That mix can mean a replacement line beside older services or a new connection near newer homes on Goldenrod Drive. Before drilling near a marked utility, we use hydrovac potholing to expose it; paint shows position, not depth.

Hydrovac truck and boring equipment staged beside an airport taxiway for utility daylighting in Oklahoma City
Our hydrovac truck and boring equipment beside an airport taxiway in Oklahoma City, set up to expose a utility crossing.

Where is Gardendale in relation to Midland?

Gardendale is an unincorporated community in Ector County, 2,946 feet above sea level and covering 11.47 square miles. The ZIP code is 79758. Odessa, the county seat and nearest larger city, is 9.2 miles south; Midland is 14.4 miles east. West Odessa is 14.6 miles southwest, and Goldsmith is 15.2 miles west. Our Yukon, Oklahoma main office is 449 road miles away, a drive of 8.9 hours. That distance matters when we plan mobilization for a bore near FM 554 or Cottonwood Road.

Places near Gardendale

What would we bore near Goldenrod Drive in Gardendale?

  • Highway crossing: A bore beneath FM 554 or Texas State Highway 158 follows the TxDOT permit profile and avoids cutting existing pavement.
  • Street service: A water or sewer line beneath Cottonwood Road can connect a property without an open cut across the road surface.
  • Fiber route: A conduit run along Goldenrod Drive can pass marked utilities after their locations are exposed along the planned path.
  • Drainage crossing: A route near Gardendale’s 6.64 miles of unnamed drainage needs careful alignment and a check of the actual channel conditions.
  • Electric conduit: A bore near Small Dent Road starts with confirming the line owner and the conduit requirements for that address.
  • New service: A connection near the 2000 or later housing area can use a short bore to reach a home without trenching across a driveway.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What do you need to quote a Gardendale bore near FM 554?

For a proposed service along Goldenrod Drive or a crossing of FM 554, send the address or map pin, what is going in the ground, pipe or conduit size and footage; a sketch or plans help. Tell us if the route crosses one of Gardendale’s unnamed drainage lines or sits in gravelly mapped soil, since those details affect what we review before laying out the bore.

The mapped ground is the first pricing consideration: sandy clay loam and very gravelly soil can change reaming and fluid needs. Next come the utilities to expose and the crossings on a route near FM 554 or Texas State Highway 158, where pavement and permit conditions shape the bore. Length and pipe size affect equipment and setup. Pit placement, excavator time, sand backfill and drainage crossings also change the scope. Gardendale’s 449 road miles from Yukon affect mobilization, as can urgent or high profile work.

Questions people ask about boring in Gardendale

Does Trinity Boring Solutions take directional boring jobs in Gardendale and Ector County?

Yes. We take Gardendale work in Ector County, with our own crews and partner contractor satellite yards that Trinity has vetted. You work with Trinity from the first call through the bore log, whichever crew is on site. A route beneath Cottonwood Road or toward FM 554 is planned around the address and the ground there.

Will a bore in Gardendale hit rock below the Faskin soil?

Rock is not mapped in the top five feet of Gardendale, but that does not rule out deeper rock. The geologic map shows the Blackwater Draw Formation, including sand, fine alluvium and silt, along with Paleocene Cenozoic sedimentary rocks. We assess the actual route before selecting the drilling approach, including near gravelly soil mapped under 35 percent of the area.

Who approves a Gardendale bore under FM 554?

TxDOT reviews a bore in FM 554 right of way through its Odessa District. The utility owner submits the permit application in RULIS, and we prepare the bore plan and profile for that filing. TxDOT’s required cover depth shapes the bore profile beneath FM 554 pavement, where its rules call for boring or tunneling rather than open trenching.

Who owns electric lines in Gardendale and Ector County, and who confirms conduit specs?

Oncor Electric Delivery Company and Southwestern Public Service report electric service in Ector County, but the owner at a specific Gardendale address must be confirmed before a conduit bore. Check the line owner’s requirements for conduit size and placement. That confirmation matters on streets such as Cottonwood Road, where the route may pass existing buried services.

Who is responsible for Small Dent Road in Gardendale, and does a bore require cutting it?

Gardendale has no city government, so responsibility for its local streets belongs to Ector County, not a city. A directional bore can pass beneath Small Dent Road without opening the road surface. We still need the route and utility locations so the entry and exit pits can be set clear of the pavement and marked lines.

How old are buried services near Goldenrod Drive in Gardendale, and can a bore replace them?

Gardendale’s median housing year is 1999, according to the American Community Survey 2019 to 2023 five year estimates. A replacement service near Goldenrod Drive may follow an older route, while newer homes may need a new connection. We expose marked utilities along the proposed path before drilling so the bore can avoid existing lines.

Can I reach Trinity after hours for an urgent bore near Small Dent Road in Gardendale?

Yes. A person answers Trinity’s phone 24 hours a day at (405) 409-7423, including for an urgent job near Small Dent Road. The address and scope help us assess the request. For any planned bore in Gardendale, marked utilities still need to be addressed before drilling near them.

How much notice does Texas811 need for a bore on Cottonwood Road in Gardendale?

For a Cottonwood Road bore, submit the Texas811 locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before the start. If the start slips more than 14 days past the original notice, make a new request. Have worn or moved marks refreshed through Texas811 before work continues.

What affects the cost of a directional bore near FM 554 in Gardendale?

The route length, pipe or conduit size, and Gardendale’s mapped sandy clay loam or gravelly soil all affect the work. The number of utilities to expose, pavement near FM 554, pits, excavator time, backfill and drainage crossings also matter. Mobilization from Yukon is another consideration because the office is 449 road miles away. There are no standard prices for every route.

Where the Gardendale facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Gardendale

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Gardendale, Texas

Type the address of your job in Gardendale. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Gardendale

All counties: Texas county list.