West Odessa Texas Directional Boring: Ratliff Soil, Monahans Draw and Interstate 20
Quick Answer: West Odessa has 407.63 public road centerline miles, and 42nd Street and University Boulevard are among its longest routes. Monahans Draw runs through the community, and we do directional boring, also called horizontal directional drilling (HDD), for planned crossings beneath roads such as 42nd Street. The Yukon main office is 460 road miles away, with Odessa 9.5 miles east of West Odessa. Ratliff soil and mapped clay loam can hold a hole and load the reamer, so staged reaming and fluid control matter.
West Odessa bores at a glance
- Unincorporated community in Ector County, Texas. Population 33,340 (2020 Census count).
- Road distance from our Yukon, Oklahoma main office: 460 miles, about 9 hours of driving.
- Ground: Ratliff soil is mapped on 29 percent of the area, with clay loam about 40 inches down.
- Rock: bedrock is mapped within 60 inches on 5 percent of the area.
- Highways inside the boundary: Interstate 20, Texas State Highway 302, FM 866, FM 2020 and Loop 338. State permit office: TxDOT Odessa District.
- Railroad track inside the boundary: none mapped.
- Named streams inside the boundary: Monahans Draw.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Who does directional boring near Monahans Draw in West Odessa?
West Odessa is in Ector County, and the Census Bureau counted 33,340 people there in the 2020 Census. We install water, sewer, gas, electric conduit and fiber lines, including planned routes along 42nd Street or near Monahans Draw. The street and stream crossings help shape the bore path, access and utility checks for each job.
Our main office is in Yukon, Oklahoma, and West Odessa work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our family business began in 1965 and has done directional boring since 1982; a project near Monahans Draw could call for anything from a 3/4 inch service line to a 48 inch casing. Bore lengths range from 10 feet to 5,000 feet, depending on the route and ground.

What kind of ground does Ratliff soil mean for a bore in West Odessa?
The USDA soil survey maps Ratliff and Conger as the leading soil series, each at 29% of the mapped area in West Odessa. At about 40 inches below the surface, clay loam accounts for 30% and gravelly loam for 29%; average clay content there is 27%. Heavy clay is mapped under 8% of the area at that depth, while 40% is gravelly. These are mapped patterns, not test borings, so the soil at a 42nd Street job still needs to be checked as work is planned.
| USDA soil survey, inside the West Odessa mapped community boundary | What is mapped |
|---|---|
| Soil series mapped | Ratliff 29 percent, Conger 29 percent, Faskin 14 percent, Kimbrough 11 percent and Reagan 8 percent |
| Texture at the surface | loam 74 percent, fine sandy loam 17 percent and silty clay loam 8 percent |
| Texture about 40 inches down | clay loam 30 percent, gravelly loam 29 percent and sandy clay loam 14 percent |
| Engineering class about 40 inches down | lean clay (CL) 81 percent and clayey gravel (GC) 11 percent |
| Average clay content about 40 inches down | 27 percent |
| Bedrock mapped within 60 inches | 5 percent of the area (0 percent hard rock, 5 percent weathered rock) |
| Seasonal water table within 60 inches | 0 percent of the area |
| Flood prone soils | 0 percent of the area |
| High corrosion risk for uncoated steel | 5 percent of the area |
Bedrock is mapped within 60 inches in 5% of West Odessa, and the mapped bedrock in that share is weathered rather than hard. That leaves room for a hard soil bit in most mapped ground, with slower progress and steering checks if a bore meets weathered rock. Seasonal water tables and flood prone soils are not mapped in the USDA survey. High steel corrosion risk is mapped under 5%, so the line owner should address casing or tracer wire protection. The Blackwater Draw Formation, a Cenozoic unit of sand, fine alluvium and silt, is mapped as much as 25 feet thick and can mean changing material along a route.
How is a bore run through West Odessa clay loam?
Clay loam makes up 30% of the mapped texture at about 40 inches in West Odessa. It can cling to the reamer, so we plan the fluid and reaming sequence around the ground along the specific route.
- Because Ratliff clay loam can stick to a reamer, we use staged reaming and manage drilling fluid so the hole and pipe are ready for the next step.
- Before drilling near any marked utility on a West Odessa bore path, we expose it with hydrovac potholing; locate paint along 42nd Street shows position, not depth.
- We track the drill head from the surface and log depth and pitch, with extra attention to gravelly ground mapped under 40% of the area at about 40 inches.
- For a Monahans Draw crossing, we plan the bore below the channel and check for U.S. Army Corps of Engineers jurisdiction during planning.

Which roads, tracks or creeks might a bore cross in West Odessa near 42nd Street?
Interstate 20 has 6.4 mapped roadway miles inside the West Odessa community boundary. Texas State Highway 302, FM 866, FM 2020 and Loop 338 also run through it, so the route determines whether a bore meets a state highway right of way. Among named streets, 42nd Street extends 9.14 miles inside the boundary, University Boulevard 9.01 miles and Knox Avenue 7.24 miles. Moss Avenue adds another long route at 7.06 miles. These streets and highways make alignment and access important parts of bore planning.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| Interstate 20 | Interstate | 6.4 roadway miles inside | State highway office |
| Texas State Highway 302 | State highway | 24.4 roadway miles inside | State highway office |
| FM 866 | State highway | 10 roadway miles inside | State highway office |
| FM 2020 | State highway | 9 roadway miles inside | State highway office |
| Loop 338 | State highway | 4.9 roadway miles inside | State highway office |
| FM 3472 | State highway | 5.6 roadway miles inside | State highway office |
| FM 1936 | State highway | 2.7 roadway miles inside | State highway office |
| Interstate 20 Business | Highway nearby | Runs along or touches the city limits | State highway office |
| Spur 450 | Highway nearby | 0.1 miles outside | State highway office |
| Texas State Highway 191 | Highway nearby | 0.2 miles outside | State highway office |
| Union Pacific | Railroad nearby | 0 miles outside | The railroad |
| Monahans Draw | Stream | 8.04 channel miles inside | Checked for Corps of Engineers jurisdiction |
| West Drain | Stream nearby | 0.3 miles outside | Checked for Corps of Engineers jurisdiction |
| West Side Drainage Channel | Stream nearby | 0.3 miles outside | Checked for Corps of Engineers jurisdiction |
No railroad track is mapped inside West Odessa, and no mapped street and rail crossings appear inside the community boundary. Union Pacific track runs along or touches the boundary, so a proposed crossing there needs the railroad’s agreement and its requirements for casing, depth and flagging. Monahans Draw has 8.04 channel miles inside the community, with 16 mapped street crossings of named streams. When planning a West Odessa route, we account for no lakes or ponds mapped within one mile as we review the bore path. A creek crossing is checked for U.S. Army Corps of Engineers jurisdiction during planning.
Who approves a West Odessa bore in Ector County?
West Odessa is an unincorporated community, so it has no city government to permit its streets; street authority depends on the road and its owner. Work in the right of way of Interstate 20, Texas State Highway 302 or a farm to market road needs a TxDOT utility permit. The TxDOT Odessa District reviews it, and the utility that owns the line submits the application in RULIS. We prepare the bore plan and profile and work under the permit issued to that utility owner. A proposed crossing of the Union Pacific track needs the railroad’s agreement, while a Monahans Draw crossing is checked for federal waterway jurisdiction during planning.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Who owns the lines serving West Odessa in Ector County?
Before planning a water bore on 42nd Street, confirm the provider for that specific address with the county, the city or the local water district. The water provider could not be matched to West Odessa from the available drinking water records. Oncor Electric Delivery Company and Southwestern Public Service report electric service in Ector County, but the line owner must be confirmed before we plan a conduit bore near University Boulevard.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| Oncor Electric Delivery Company and Southwestern Public Service | Electric utilities reporting service in Ector County | EIA Form 861 | Confirm the line owner by address |
The American Community Survey 2019 to 2023 five year estimates put West Odessa’s median housing year at 1987; 7% of homes were built before 1960 and 31% in 2000 or later. Replacement work can involve older buried lines, while newer construction can mean a service extension along University Boulevard. Before drilling near a marked utility, we hydrovac pothole it; paint shows position, not depth. For example, a marked line under 42nd Street must be exposed before the drill approaches it.

How far is West Odessa from Goldsmith and the Yukon yard?
West Odessa covers 62.14 square miles in Ector County at an elevation of 2,964 feet. We use ZIP codes 79764 and 79763 to identify the West Odessa address covered by our underground work. Odessa, the county seat and nearest larger city, is 9.5 miles east; Goldsmith is 12.1 miles northwest, and Gardendale is 14.6 miles northeast. Midland lies 26.1 miles northeast. The Yukon, Oklahoma main office is 460 road miles away, a 9.0 hour drive. That distance is part of mobilization planning for work near Interstate 20 or elsewhere in the community.
Places near West Odessa
- Directional boring in Odessa: 9.5 miles east
- Directional boring in Goldsmith: 12.1 miles northwest
- Directional boring in Gardendale: 14.6 miles northeast
- Directional boring in Midland: 26.1 miles northeast
- Directional boring in Thorntonville: 30.6 miles southwest
Which jobs call for a bore near University Boulevard in West Odessa?
- Highway crossing: A bore beneath Interstate 20 avoids cutting the highway pavement, with the alignment and permit set for the specific right of way.
- Water service: A new service near University Boulevard needs the address specific water provider confirmed before the bore route is planned.
- Fiber conduit: A conduit run along 42nd Street can be routed beneath pavement, with marked utilities exposed before drilling near them.
- Creek crossing: A Monahans Draw bore keeps the channel banks uncut and includes a check for federal waterway jurisdiction during planning.
- Rail crossing: A proposed bore by the Union Pacific boundary needs an agreement with the railroad that sets crossing requirements.
- Replacement line: Work near Moss Avenue can replace an older buried line while a bore passes beneath pavement and marked utilities.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What do you need to quote a West Odessa bore near Moss Avenue?
Start with the address or map pin, such as a location on Moss Avenue, then tell us what will go underground. Give us the pipe or conduit size and the footage; a sketch or plans can show how the route meets University Boulevard or a nearby utility. Those details let us assess the alignment and access before pricing the work.
The job sets the price. Ground conditions such as Ratliff clay loam affect drilling and reaming; crossings of Interstate 20, Monahans Draw or the Union Pacific boundary can add planning and exposure work. Pipe size and bore length matter, as do pavement, pits, excavator time and sand backfill. Mobilization also matters because West Odessa is 460 road miles from the Yukon yard. Across West Odessa ZIP codes 79764 and 79763, high profile or emergency work can change our scope.
Questions people ask about boring in West Odessa
Does Trinity take directional boring jobs in West Odessa, Ector County, and who staffs them?
Yes. We take directional boring work in West Odessa, Ector County, and manage the job from the first call through the bore log. Our own crews and partner contractor crews from vetted satellite yards handle the field work. That staffing model lets us take projects near Monahans Draw without claiming a local office.
What do older homes along University Boulevard mean for West Odessa replacement bores?
The American Community Survey 2019 to 2023 five year estimates give West Odessa a median housing year of 1987, with 7% of homes built before 1960 and 31% built in 2000 or later. A replacement bore near University Boulevard may need to avoid existing lines, so marked utilities are exposed before drilling near them.
What ground does a West Odessa bore encounter in Ratliff soil?
The USDA soil survey maps Ratliff over 29% of West Odessa, and clay loam makes up 30% of the mapped texture at about 40 inches. Clay can cling to the reamer, so staged reaming and careful fluid control help manage the hole. These are mapped soil patterns, not a site specific test.
Is rock likely on a West Odessa bore, and how much bedrock is mapped?
The USDA survey maps bedrock within 60 inches under 5% of West Odessa, with 5% mapped as weathered bedrock and no hard bedrock mapped at that depth. A bore may slow where it meets weathered rock, but the map does not rule out rock deeper down along a route such as Moss Avenue.
Who approves a West Odessa bore beneath Interstate 20?
For work in Interstate 20 right of way, the utility that owns the line applies for the TxDOT utility permit through RULIS. The TxDOT Odessa District reviews that application, and we prepare the bore plan and profile. The road’s right of way and the proposed crossing determine the permit details.
What should we confirm before boring beneath Union Pacific track in West Odessa?
A crossing of the Union Pacific track near the West Odessa boundary needs an agreement from the railroad. That agreement sets the casing, depth and flagging requirements. If the route also occupies Interstate 20 right of way, TxDOT asks for a copy of the railroad agreement.
How early should I call Texas811 for a West Odessa bore near 42nd Street?
Request a Texas811 locate at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before the start. A bore planned along 42nd Street needs a new request if the start slips more than 14 days past the original notice. Before continuing boring work in West Odessa ZIP code 79764, we refresh marks that are worn or moved.
Does the 460 mile trip from Yukon to West Odessa change the job near Odessa?
West Odessa is 460 road miles and a 9.0 hour drive from our Yukon main office; Odessa is 9.5 miles east of the community. That distance can affect mobilization planning and cost, alongside the bore length, pipe size, Ratliff soil and crossings such as Interstate 20.
What affects the cost of a directional bore in West Odessa near Interstate 20?
Price depends on the job scope, including bore length, pipe or conduit size, soil and rock, utility crossings, pavement, pits and excavator time. Work beneath Interstate 20 or near Monahans Draw can add crossing planning, while the 460 road miles from Yukon affect mobilization. On a West Odessa route beneath Union Pacific track, high profile or emergency work can also change our scope.
Where the West Odessa facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside West Odessa
- U.S. Census Bureau, TIGER/Line 2024: West Odessa boundary, roads, rail lines and streams
- U.S. Census Bureau, 2020 Census: West Odessa population count
- U.S. Census Bureau, American Community Survey 2019 to 2023: West Odessa housing units and year built
- Macrostrat geologic map compilation: map units under West Odessa
- U.S. Department of Transportation, North American Rail Network: track owners in Ector County
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Ector County
- U.S. Geological Survey, Elevation Point Query Service: West Odessa elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to West Odessa
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in West Odessa
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in West Odessa, Texas
Type the address of your job in West Odessa. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for West Odessa
All counties: Texas county list.
