trinityboringsolutions.com

Gary City Texas Directional Boring: Scottsville Soil, FM 999 and BNSF Railway

Quick Answer: Directional boring Gary City TX includes horizontal directional drilling (HDD), and we can route lines beneath FM 999 without cutting the pavement. Gary City is 385 road miles from our Yukon yard, and the BNSF Railway track makes route planning part of the scope. At the surface, the USDA soil survey maps mostly very fine sandy loam; at about 40 inches, clay is mapped across 62 percent of town, so sticky cuttings shape the reaming plan.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Gary City bores at a glance

  • Incorporated city in Panola County, Texas. Population 343 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 385 miles, about 7.7 hours of driving.
  • Ground: Scottsville soil is mapped on 60 percent of the area, with clay about 40 inches down.
  • Rock: no bedrock is mapped in the top 60 inches.
  • Highways inside the boundary: FM 999, FM 2260 and FM 10. State permit office: TxDOT Atlanta District.
  • Railroad track inside the boundary: BNSF Railway, with 3 mapped street and rail crossings.
  • Named streams inside the boundary: Daniels Ditch and Murvaul Bayou Creek.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who handles directional boring near Daniels Ditch in Gary City?

We take directional boring work in Gary City, Panola County, where water, sewer, gas, electric conduit or fiber can run beneath FM 10, FM 2260 or Santa Fe Street. The Census Bureau Vintage 2024 estimate puts the town at 343 people. The top five feet here are mostly very fine sandy loam over clay mapped at about 40 inches, a change that affects how we open and ream the hole.

Our main office is in Yukon, Oklahoma, and Gary City work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. We have had no utility strike in over 25 years, and our family business has done directional boring since 1982. Along FM 999, that care matters around existing lines, including electric service reported in Panola County.

Aerial view of a bore pit with drill rig and conduit alongside a directional drill rig and conduit on a concrete lot
Our crew at a bore pit beside the directional drill on a conduit job, seen from above. Photos on this page are from our jobs in Oklahoma and Texas.

What does the Scottsville soil survey show in Gary City?

The USDA soil survey maps Scottsville soil across 60 percent of Gary City, mostly as the Scottsville Latex complex on 0 to 2 percent slopes. Very fine sandy loam makes up 81 percent of the mapped surface texture, while at about 40 inches clay is mapped under 62 percent of the town and clay loam under 25 percent. Average clay content at that depth is 41 percent. These are mapped soil patterns, not test borings, so the route still needs job specific planning around Santa Fe Street or the chosen alignment.

USDA soil survey, inside the Gary City city limitsWhat is mapped
Soil series mappedScottsville 60 percent, Eastwood 21 percent, Latex 6 percent, Keatchie 6 percent and Iulus 3 percent
Texture at the surfacevery fine sandy loam 81 percent and fine sandy loam 15 percent
Texture about 40 inches downclay 62 percent, clay loam 25 percent and sandy clay loam 7 percent
Engineering class about 40 inches downfat clay (CH) 62 percent, lean clay (CL) 33 percent and silty clayey sand (SC SM) 3 percent
Average clay content about 40 inches down41 percent
Bedrock mapped within 60 inchesNone mapped
Seasonal water table within 60 inches71 percent of the area
Flood prone soils5 percent of the area
High corrosion risk for uncoated steel68 percent of the area

Bedrock is not mapped within 60 inches in Gary City, but that does not rule out deeper rock. Seasonal water tables are mapped within 60 inches across 71 percent of the area, so pits near Daniels Ditch may need pumping. Flood prone soils cover 5 percent, which makes channel depth part of creek planning. High steel corrosion risk covers 68 percent, so the line owner should consider casing and tracer wire materials. The geologic map includes Cenozoic clayey sand and sandy clay residuum, with Paleogene Wilcox Group, undivided, below; those units include clay and sand that can change drilling conditions.

How do we bore through clay in Gary City?

Gary City has clay mapped under much of the ground at about 40 inches, so we plan for sticky cuttings and possible grip on the pipe. Around FM 999, fluid control and staged reaming help protect the bore path.

  1. Clay is mapped under 62 percent of Gary City at about 40 inches, so we use a thinner fluid mix and polymer to manage sticky cuttings.
  2. Because heavy clay can grip the pipe, we ream in stages and plan to pull pipe the same day the hole is opened near FM 999.
  3. With seasonal water tables mapped within 60 inches across 71 percent of Gary City, we keep pits small and pump water where needed.
  4. Before a bore approaches a marked line near Santa Fe Street, we pothole it to confirm depth; surface paint alone does not show how deep it sits.
Bore pit with a 6 inch PVC sleeve, traffic cones and blue water line flags at NE 24th Street in Oklahoma City
A bore pit with a 6 inch PVC sleeve, traffic cones and blue water line flags at NE 24th Street in Oklahoma City.

What might a bore cross near Santa Fe Street in Gary City?

Gary City has FM 999, FM 2260 and FM 10 within its limits, so a route under any of these state highways needs careful depth and pavement planning. Santa Fe Street is the longest named street at 0.34 miles in town, followed by Bobcat Trail at 0.32 miles and Williams Street at 0.3 miles. A bore may also need to pass beneath Railroad Street or Daniels. Gary City has 11.14 public road centerline miles, so the address and alignment determine which roadway owner and crossing conditions apply.

CrossingTypeMapped extentWho has a say
FM 999State highway3.4 roadway miles insideState highway office
FM 2260State highway1.3 roadway miles insideState highway office
FM 10State highway1.1 roadway miles insideState highway office
BNSF RailwayRailroad1.45 track miles insideThe railroad
Daniels DitchStream0.19 channel miles insideChecked for Corps of Engineers jurisdiction
Murvaul Bayou CreekStream0.06 channel miles insideChecked for Corps of Engineers jurisdiction
Beech CreekStream nearby0.3 miles outsideChecked for Corps of Engineers jurisdiction
Cold CreekStream nearby0.8 miles outsideChecked for Corps of Engineers jurisdiction
West Fork Indian CreekStream nearby0.9 miles outsideChecked for Corps of Engineers jurisdiction
Brushy CreekStream nearby0.9 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

BNSF Railway owns 1.45 track miles inside Gary City, and the mapped street and rail crossing count is 3. A crossing alignment needs coordination with the railroad before drilling. Daniels Ditch runs 0.19 channel miles in town, and Murvaul Bayou Creek runs 0.06 miles; one mapped street crossing passes over a named stream. A creek bore needs depth planning beneath the channel, and the Daniels Ditch crossing is checked for federal waterway jurisdiction during planning.

Who approves a Gary City bore under BNSF Railway or FM 999?

FM 999 belongs to the state highway system, so a bore in its right of way needs a TxDOT utility permit reviewed by the TxDOT Atlanta District for Panola County. The utility that owns the line submits the application in TxDOT’s RULIS system; we prepare the bore plan and profile for that filing and work under the owner’s permit. For BNSF Railway track, the railroad sets crossing conditions through its agreement. Gary City streets are city streets because the town is incorporated. A Daniels Ditch crossing is checked for U.S. Army Corps of Engineers jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Who owns the utility lines in Gary City and Panola County?

The water provider for a specific Gary City address has to be confirmed with the town, Panola County or the local water district before a bore is planned. Electric service reported in Panola County includes Southwestern Electric Power, Deep East Texas Electric Cooperative, Panola Harrison Electric Cooperative and Rusk County Electric Cooperative. Those reports do not identify the electric owner at each address, so the line owner is confirmed before planning an electric conduit bore along FM 10 or another route.

Line ownerWhat it isSourceSize
Southwestern Electric Power, Deep East Texas Electric Cooperative, Panola-Harrison Electric Cooperative and Rusk County Electric CooperativeElectric utilities reporting service in Panola CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Gary City’s median housing year at 1975; 23 percent of homes were built before 1960, 52 percent from 1960 to 1999 and 25 percent in 2000 or later. A bore along Williams Street may serve replacement work or a newer connection. Before drilling near lines, we hydrovac pothole marked utilities, including any water service or electric conduit, because paint shows position but not depth.

Trinity Boring Solutions technician hydrovac daylighting along a commercial curbline during utility locating in Oklahoma City
Hydrovac daylighting along a commercial curb line in Oklahoma City to find the utilities before a bore.

Where is Gary City in relation to Carthage?

Gary City is in Panola County, 8.8 miles south of Carthage, the county seat and nearest larger city. The town covers 1.9 square miles at an elevation of 302 feet, and ZIP code 75643 serves the area. Timpson is 8.5 miles south, Tenaha is 9.2 miles southeast, and Garrison and Beckville are each 15.8 miles away, to the southwest and north respectively. From our Yukon yard, Gary City is 385 road miles and a 7.7 hour drive, which is part of planning a job near FM 999.

Places near Gary City

Which Gary City jobs near Bobcat Trail call for a bore?

  • Highway crossing: A route beneath FM 999 needs a bore plan that fits the state right of way and keeps existing pavement intact.
  • Water service: A connection near Santa Fe Street needs its provider confirmed before we plan the line and expose marked utilities.
  • Fiber conduit: A route along Bobcat Trail can carry conduit beneath the street without an open cut across the pavement.
  • Creek crossing: A line beneath Daniels Ditch needs a planned depth below the channel and a check for federal waterway jurisdiction.
  • Rail crossing: A route beneath BNSF Railway track needs the railroad agreement to set crossing conditions before drilling starts.
  • Electric conduit: Along Williams Street, we confirm the line owner and pothole marked utilities before the drill nears them.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What drives the price of a Gary City bore near FM 999?

A map pin or address matters for a Gary City quote because a route near FM 999, Santa Fe Street or Daniels Ditch can have different crossings and access. Tell us what will go underground, the pipe or conduit size and the footage. A sketch or plans help us check the alignment, nearby marked lines and any pavement, track or creek crossing.

Clay mapped under 62 percent of Gary City at about 40 inches is a leading price factor because sticky ground can call for staged reaming and more fluid control. The route length and pipe or conduit size also matter, along with marked utilities to expose, pavement, pits and excavator time. A crossing under FM 999 or BNSF Railway adds planning demands, and Daniels Ditch can affect the crossing plan. Mobilization reflects the 385 road miles from Yukon.

Questions people ask about boring in Gary City

Does Trinity take directional boring work in Panola County near Gary City?

Yes, we take directional boring work in Gary City and staff it with our own crews or crews from vetted partner drilling contractors. We remain your contact from the first call through the bore log. The route may run under FM 999, Santa Fe Street or another local alignment.

Will a Gary City bore hit rock below the Scottsville soil?

Bedrock is not mapped within 60 inches in Gary City, but that does not rule out rock deeper down. The geologic map shows Cenozoic clayey sand and sandy clay residuum and the Paleogene Wilcox Group, undivided. Those mapped units include clay and sand, so conditions along a particular route still need consideration.

Who permits a Gary City bore under FM 999?

TxDOT reviews a right of way utility permit for FM 999 through its Atlanta District, which handles Panola County. The utility owner files the application in TxDOT’s RULIS system, and we provide the bore plan and profile for that filing. The permit sets the authorized crossing conditions for the route.

What does a Gary City bore under BNSF Railway require?

A bore beneath BNSF Railway track requires an agreement with the railroad that owns the track. Its crossing terms address matters such as casing, depth and flagging. With 1.45 track miles inside Gary City, the exact route must be checked against the track alignment before work is planned.

Can a line be bored beneath Daniels Ditch in Gary City?

A line can be planned beneath Daniels Ditch, but its route and depth must account for the channel. The stream runs 0.19 channel miles inside Gary City, and the crossing is checked for U.S. Army Corps of Engineers jurisdiction during planning. The alignment determines the work scope.

Which electric line owner serves my Gary City address in Panola County?

The address specific electric owner must be confirmed before planning a conduit bore in Gary City. Southwestern Electric Power and three electric cooperatives report service in Panola County, but that does not establish which serves a particular property. Confirm the owner and conduit requirements before setting a route along FM 10 or another street.

Can I reach Trinity after hours for an urgent bore near Williams Street in Gary City?

Yes, a person answers Trinity’s phone 24 hours a day at (405) 409-7423. For an urgent job near Williams Street, tell us the location and what line needs to go in so we can understand the request. Emergency work can affect the plan and the job scope.

How early should I request a locate for a Gary City bore near Santa Fe Street?

Texas811 needs a locate request at least 48 hours before excavation begins, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days ahead. For work near Santa Fe Street, marks show line position, not depth. If marks wear off or move, request refreshed marks through Texas811 before work continues.

What affects the cost of a Gary City directional bore near FM 999?

The route length, pipe or conduit size, clay conditions and crossings drive the scope. A job under FM 999 may involve state highway planning, while BNSF Railway or Daniels Ditch can add crossing work. Marked utilities, pavement, pits, excavator time and mobilization from Yukon also affect the price; we assess the specific alignment.

Where the Gary City facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Gary City

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Gary City, Texas

Type the address of your job in Gary City. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Gary City

Same county: Tatum. All counties: Texas county list.