trinityboringsolutions.com

Tenaha Texas Directional Boring: Eastwood Soil, US 59 and Hillard Creek

Quick Answer: City of Tenaha water lines and electric providers reporting in Shelby County make ownership a first check before a conduit bore near US 59. Trinity Boring Solutions takes directional boring, or horizontal directional drilling (HDD), in Tenaha, including routes beneath BNSF Railway tracks. Tenaha is 392 road miles from our Yukon, Oklahoma main office, a mobilization factor for work near Gary City. Eastwood soil has clay deeper down that can grip pipe, so staged reaming helps keep the pull moving.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Tenaha bores at a glance

  • Incorporated city in Shelby County, Texas. Population 1,002 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 392 miles, about 7.7 hours of driving.
  • Ground: Eastwood soil is mapped on 48 percent of the area, with clay about 40 inches down.
  • Rock: no bedrock is mapped in the top 60 inches.
  • Highways inside the boundary: US 59, US 84, US 96, FM 947 and Loop 157. State permit office: TxDOT Lufkin District.
  • Railroad track inside the boundary: BNSF Railway and Union Pacific, with 15 mapped street and rail crossings.
  • Named streams inside the boundary: Hillard Creek.
  • Public water: City of Tenaha, groundwater wells.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who can I call for directional boring near Hillard Creek in Tenaha?

Trinity Boring Solutions takes directional boring work in Tenaha, Shelby County, where the Census Bureau Vintage 2024 estimate puts the population at 1,002. Before planning a bore, we check ownership: the City of Tenaha runs the groundwater public water system, while electric providers reporting in the county include Southwestern Electric Power, Deep East Texas Electric Cooperative and Rusk County Electric Cooperative. Water, sewer, gas, electric conduit and fiber lines can run beneath streets such as Railroad Street.

Our main office is in Yukon, Oklahoma, and Tenaha work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. We have drilled directionally since 1982, after our family business began in 1965. Four decades of boring experience helps us plan for Tenaha’s mapped Eastwood sandy loam and clay layers, where the reamer and pipe pull need a ground specific plan.

Compact Ditch Witch drill rig boring a new utility line across a front yard on a residential street in Edmond, Oklahoma
Our compact Ditch Witch drill boring a new utility line across a front yard on a residential street in Edmond, Oklahoma. Photos on this page are from our jobs in Oklahoma and Texas.

How does Eastwood soil affect a bore in Tenaha?

Eastwood soil is the largest mapped soil series in Tenaha at 48 percent, with Scottsville at 46 percent, according to the USDA soil survey. The mapped surface is mostly very fine sandy loam, while about 40 inches down the survey maps clay across 54 percent of the area and clay loam across 43 percent. Average clay content at that depth is 41 percent, and heavy clay is mapped across 56 percent. These are mapped soil patterns, not test borings, so the route still needs field checks.

USDA soil survey, inside the Tenaha city limitsWhat is mapped
Soil series mappedEastwood 48 percent, Scottsville 46 percent and Dreka 3 percent
Texture at the surfacevery fine sandy loam 94 percent and loam 4 percent
Texture about 40 inches downclay 54 percent, clay loam 43 percent and loam 3 percent
Engineering class about 40 inches downfat clay (CH) 54 percent and lean clay (CL) 45 percent
Average clay content about 40 inches down41 percent
Bedrock mapped within 60 inchesNone mapped
Seasonal water table within 60 inches52 percent of the area
Flood prone soils4 percent of the area
High corrosion risk for uncoated steel52 percent of the area

For Tenaha, the USDA survey maps no bedrock in the top five feet, but the geologic map also lists the Wilcox Group, undivided, a Paleogene unit with mudstone and sandstone. A seasonal water table is mapped within 60 inches across 52 percent of the area, so pits may need pumping. Flood prone soils cover 4 percent, including areas where creek depth needs attention. High steel corrosion risk is mapped across 52 percent; the line owner should consider casing and tracer wire materials, while HDPE avoids that soil concern.

How do we drill through clay in Tenaha?

Tenaha’s Eastwood and Scottsville soils call for controlled fluid and a staged ream, not a fast pull through sticky ground. We track the head and plan the pits around the route, including crossings near Hillard Creek.

  1. Eastwood and Scottsville ground has clay at about 40 inches, so we use thinner fluid with polymer and ream in stages to limit sticky buildup.
  2. Where Tenaha’s heavy clay lies on a route near pavement, we watch fluid returns and keep pressure controlled so drilling does not lift the surface.
  3. Every marked utility on a Tenaha bore path is exposed by hydrovac before drilling near it; on a Railroad Street route, paint alone does not show depth.
  4. A walkover locator tracks the drill head and logs depth and pitch; near Hillard Creek, we set pits in dirt so the crossing avoids cutting the bank or pavement.
Walkover locator at the edge of the wetland on a directional bore at the Cimarron site in Logan County, Oklahoma
Walkover locator at the edge of a wetland on a directional bore in Logan County, Oklahoma.

What is in the way of a new line in Tenaha near US 59?

A Tenaha bore may have to pass under US 59, US 84, US 96 or one of the local state routes, including FM 947 and Loop 157. The town also has 39.94 public road centerline miles. Long named streets include Masonic Street at 2.71 miles, Railroad Street at 1.98 miles and Center Street at 1.38 miles. A route under existing highway pavement needs boring or tunneling rather than an open trench; locating the exact road and right of way early helps establish the crossing plan.

CrossingTypeMapped extentWho has a say
US 59US highway3 roadway miles insideState highway office
US 84US highway2.6 roadway miles insideState highway office
US 96US highway2.2 roadway miles insideState highway office
FM 947State highway2.3 roadway miles insideState highway office
Loop 157State highway1.5 roadway miles insideState highway office
FM 2141State highway0.5 roadway miles insideState highway office
FM 2695State highway0.1 roadway miles insideState highway office
FM 946State highway0.1 roadway miles insideState highway office
BNSF RailwayRailroad3.31 track miles insideThe railroad
Union PacificRailroad2.32 track miles insideThe railroad
Hillard CreekStream0.19 channel miles insideChecked for Corps of Engineers jurisdiction
Waller CreekStream nearbyAlong the boundaryChecked for Corps of Engineers jurisdiction
Risinger CreekStream nearby0.2 miles outsideChecked for Corps of Engineers jurisdiction
Mc Faddin CreekStream nearby0.7 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

Tenaha has 3.31 track miles owned by BNSF Railway and 2.32 owned by Union Pacific, with 15 mapped street and rail crossings in town. Hillard Creek runs for 0.19 channel miles inside the limits, and no mapped street crossings of named streams are listed. Waller Creek touches or runs along the boundary, while Risinger Creek is 0.2 miles away. No lakes or ponds are mapped within one mile, but a creek route still calls for attention to channel depth and jurisdiction.

Whose permission does a Tenaha bore near BNSF Railway need?

For a Tenaha crossing of US 59, US 84, US 96, FM 947 or another state route, the utility line owner files the TxDOT utility permit in RULIS; we prepare the bore plan and profile for that application. The TxDOT Lufkin District reviews it. Cover at highway crossings is generally 60 inches for electric, communication, water and pressurized sewer lines, with different cover along the right of way for some line types; the permit can set another depth. TxDOT requires boring or tunneling under existing highway pavement, with casing and a bore beneath all rural highway travel lanes. A crossing of BNSF Railway or Union Pacific needs the track owner’s agreement. Hillard Creek planning includes a check for U.S. Army Corps of Engineers jurisdiction.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Whose lines are already buried in Tenaha near City of Tenaha?

The City of Tenaha public water system uses groundwater wells and serves 1,746 people through 669 service connections. Electric service reported in Shelby County includes Southwestern Electric Power, Deep East Texas Electric Cooperative and Rusk County Electric Cooperative; we confirm the line owner for the specific address before planning an electric conduit bore. That check matters on a route near Railroad Street, where an existing water or electric line can affect the bore path.

Line ownerWhat it isSourceSize
City of TenahaPublic water systemGroundwater wells669 connections, 1,746 people served
Southwestern Electric Power, Deep East Texas Electric Cooperative and Rusk County Electric CooperativeElectric utilities reporting service in Shelby CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Tenaha’s median housing year at 1983; 9 percent of homes predate 1960, 69 percent were built from 1960 to 1999, and 22 percent in 2000 or later. That mix can mean either a replacement route or a new service near Bowers Drive. Across Tenaha, we hydrovac pothole every marked utility on the bore path before drilling near it. For example, a line under Railroad Street needs exposure at marked conflicts because paint shows position, not depth.

Trinity Boring Solutions crew running a 2 inch conduit directional bore with airport hangars and a parked jet in the background in Oklahoma City
Our crew running a 2 inch conduit bore near the hangars at an Oklahoma City airport.

What is near Tenaha, including Gary City?

Tenaha is an incorporated town in Shelby County, with an area of 3.74 square miles and an elevation of 353 feet. The town is served by ZIP code 75974. Gary City is 9.2 miles northwest, Timpson is 9.2 miles west, and Center is 11.1 miles south. Center is both the county seat and the nearest larger city. Joaquin is 11.7 miles east, and Carthage is 15.4 miles north. From our Yukon, Oklahoma yard, Tenaha is 392 road miles away and about a 7.7 hour drive, which matters when planning equipment mobilization.

Places near Tenaha

What kinds of bores come up in Tenaha near Railroad Street?

  • Highway crossing: A route beneath US 59 uses a bore rather than an open trench through existing highway pavement.
  • Water service: A service near the City of Tenaha system starts with confirming the line owner and the route from the groundwater network.
  • Fiber conduit: A conduit route along Masonic Street needs marked utilities exposed before the drill approaches them.
  • Rail crossing: A route beneath BNSF Railway or Union Pacific tracks follows the agreement set by the track owner.
  • Creek crossing: A Hillard Creek route is planned beneath the channel and checked for federal waterway jurisdiction.
  • Street replacement: A replacement line beneath Railroad Street can use pits at each side to keep the pavement uncut.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

How do I get a quote for Tenaha work near Bowers Drive?

For a quote near Bowers Drive, start with the street address or a map pin, then tell us what will go underground. A water service, fiber conduit or sewer line calls for its pipe or conduit size and estimated footage. A sketch or plans showing the route toward US 59 or a nearby track help us see the crossings and access before we scope the bore.

Price follows the route and the work it takes, not just the footage. Tenaha is 392 road miles from Yukon, so mobilization matters; Eastwood clay can affect reaming and fluid planning. A crossing near US 59 or BNSF Railway can add permit, casing and coordination needs. We also account for pipe size, exposed utilities, pavement or concrete, creek or drainage crossings, pits, excavator time, sand backfill and any high profile or emergency schedule.

Questions people ask about boring in Tenaha

Does Trinity Boring Solutions take jobs in Tenaha and Shelby County, and who does the work?

Yes. We take directional boring work in Tenaha and across Texas, with our own crews and vetted partner drilling contractors available through our service model. You work with Trinity from the first call through the bore log, regardless of which crew is assigned. For a route near Hillard Creek, we still plan around the specific ground and crossing.

How does Tenaha housing age near Railroad Street affect a replacement bore?

Tenaha’s housing ranges from older homes to newer construction, so a replacement bore and a new service can have different tie in points. The American Community Survey 2019 to 2023 estimates give a median year built of 1983, with 9 percent built before 1960. Near Railroad Street, we expose marked utilities before drilling close to them.

Could groundwater or flood prone ground affect Tenaha bore pits near Hillard Creek?

It can. The USDA survey maps a seasonal water table within 60 inches across 52 percent of Tenaha, so pits near Hillard Creek may need to be kept small and pumped. Flood prone soils are mapped across 4 percent of the area. A creek crossing is planned to stay below the channel and checked for U.S. Army Corps of Engineers jurisdiction.

Does Eastwood soil in Tenaha create a steel corrosion concern, and what pipe is used?

Yes, the mapped soils show high steel corrosion risk across 52 percent of Tenaha. The line owner chooses material and any coating for steel casing or tracer wire. For Tenaha boring, we account for the fact that HDPE is not subject to that soil corrosion concern. The Eastwood soil map is a planning clue, not a site specific corrosion test.

What ground does a Tenaha bore pass through in Eastwood soil?

The USDA soil survey maps Eastwood across 48 percent of Tenaha and Scottsville across 46 percent. Surface texture is mostly very fine sandy loam; at about 40 inches, clay is mapped in 54 percent of the area and clay loam in 43 percent. Those mapped patterns help guide the drilling plan, but they do not replace checking the actual route.

Will a bore in Tenaha hit rock along the bore path?

The USDA survey maps no bedrock in Tenaha’s top five feet, which does not rule out rock deeper down. The geologic map lists the Wilcox Group, undivided, a Paleogene unit that includes mudstone and sandstone. We would use route information and field conditions to plan the bit and pace for a bore.

How far is Tenaha from the Yukon office, and does Center affect the job?

Tenaha is 392 road miles, or about a 7.7 hour drive, from our Yukon, Oklahoma main office. Center is 11.1 miles south and is the nearest larger city, but the Yukon distance is what affects equipment mobilization. A job near Center Street still needs its own route and access review.

How much notice does Texas811 need for a Tenaha bore along Masonic Street?

For a bore along Masonic Street, the locate request goes through Texas811 at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before work. For Tenaha scheduling, we follow Texas811 guidance that describes the notice period as at least two working days. If the start slips more than 14 days past the original notice, request another ticket; have worn or moved marks refreshed before work resumes.

What affects the cost of a directional bore in Tenaha near US 59?

The price depends on the route near US 59, not just its length. We consider footage, pipe or conduit size, Eastwood clay, utilities that must be exposed, pavement, and crossings of roads, tracks or drainage. A BNSF Railway crossing and the 392 road miles from Yukon can also change the work and mobilization required.

Where the Tenaha facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Tenaha

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Tenaha, Texas

Type the address of your job in Tenaha. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Tenaha

Same county: Huxley · Shelbyville. All counties: Texas county list.