Zephyr Texas Directional Boring: Doudle Soil, US 183 and BNSF Railway
Quick Answer: Doudle soil is mapped across 24 percent of Zephyr, and its clay loam can hold a bore hole while sticky cuttings build on the reamer; Trinity handles directional boring, also called horizontal directional drilling (HDD), beneath US 183 in Texas. Zephyr is 339 road miles from our Yukon, Oklahoma main office, so a route near BNSF Railway is part of the mobilization plan. Bedrock is mapped within 60 inches across 59 percent of the area, so a bore can shift from soil to rock.
Zephyr bores at a glance
- Unincorporated community in Brown County, Texas. Population 179 (2020 Census count).
- Road distance from our Yukon, Oklahoma main office: 339 miles, about 6.9 hours of driving.
- Ground: Doudle soil is mapped on 24 percent of the area, with bedrock about 40 inches down.
- Rock: bedrock is mapped within 60 inches on 59 percent of the area.
- Highways inside the boundary: US 183, FM 590, FM 218 and FM 1467. State permit office: TxDOT Brownwood District.
- Railroad track inside the boundary: BNSF Railway, with 4 mapped street and rail crossings.
- Public water: Zephyr Water Supply Corporation, surface water bought from another system.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Who can I call for directional boring in Zephyr, Brown County?
Doudle soil around Zephyr can keep cuttings sticky, so the route matters as much as the line type. The Census Bureau counted 179 people in Zephyr in the 2020 Census; it does not publish yearly estimates for unincorporated places. Along US 183, FM 590 or FM 218, we install water, sewer, gas, electric conduit and fiber by bore where the alignment and clearances fit.
Our main office is in Yukon, Oklahoma, and Zephyr work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Since 1982, more than four decades of directional boring have taught our crews to account for changing cuts where Doudle soils meet the mapped Glen Rose limestone. Trinity began as a family business in 1965, and we stay responsible for Zephyr work from the first call through the bore log.

What does the soil survey show about Zephyr and Doudle soil?
The USDA soil survey maps the Doudle Real association across 24 percent of Zephyr, on slopes of 1 to 8 percent. Clay loam makes up 34 percent of the mapped surface texture, while cobbly loam accounts for 24 percent. At about 40 inches below the surface, bedrock is mapped across 32 percent of the area, clay across 21 percent and silty clay across 17 percent. The survey maps no sandy soils at that depth. These are mapped patterns, not a site specific bore log. In clay rich sections, cuttings can stick to the reamer and grip pipe.
| USDA soil survey, inside the Zephyr mapped community boundary | What is mapped |
|---|---|
| Soil series mapped | Doudle 24 percent, Abilene 18 percent, Bolar 18 percent, Krum 11 percent and Hext 8 percent |
| Texture at the surface | clay loam 34 percent, cobbly loam 24 percent and loam 11 percent |
| Texture about 40 inches down | bedrock 32 percent, loam 25 percent and clay 21 percent |
| Engineering class about 40 inches down | fat clay (CH) 35 percent, lean clay (CL) 27 percent and clayey sand (SC) 6 percent |
| Average clay content about 40 inches down | 36 percent |
| Bedrock mapped within 60 inches | 59 percent of the area (18 percent hard rock, 40 percent weathered rock) |
| Seasonal water table within 60 inches | 0 percent of the area |
| Flood prone soils | 0 percent of the area |
| High corrosion risk for uncoated steel | 38 percent of the area |
The USDA soil survey maps bedrock within 60 inches across 59 percent of Zephyr, including hard bedrock across 18 percent and weathered bedrock across 40 percent. Typical mapped depth is 32 inches, so a bore may encounter rock before its target depth. Seasonal water tables and flood prone soils are not mapped in the top 60 inches. High steel corrosion risk is mapped across 38 percent, which the line owner should consider for steel casing and tracer wire. The mapped Glen Rose limestone is Aptian in age; rock conditions still need to be checked along the actual route.
How do crews bore Zephyr ground with bedrock near the surface?
Doudle soil and shallow mapped bedrock call for a route specific plan. We adjust the tooling and drilling fluid to the ground along US 183, then track the drill head and log its depth and pitch.
- Where Doudle clay loam is mapped, we manage fluid returns and ream in stages so sticky cuttings do not load the reamer or press against nearby pavement.
- At sections with bedrock mapped near the surface, we match the cutting head to the ground and allow for slower progress where soil changes to Glen Rose limestone.
- For routes near US 183, we track the drill head from the surface and record depth and pitch as the bore advances beneath the roadway.
- Where a Zephyr route approaches BNSF Railway or Blanket Creek, we plan the pits and bore alignment around the actual crossing and its access conditions.

Which roads, tracks or creeks could a Zephyr bore cross near US 183?
US 183 has 1.5 mapped roadway miles inside the Zephyr community boundary. FM 590 has 1.2 miles, FM 218 has 0.8 and FM 1467 has 0.5. US 84 is 1.2 miles outside the boundary. These state or US routes may call for a permitted bore when work uses their right of way. Zephyr has 10.7 public road centerline miles and no named streets in the records, so a map pin is useful for identifying the exact road and access points before setting pits.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| US 183 | US highway | 1.5 roadway miles inside | State highway office |
| FM 590 | State highway | 1.2 roadway miles inside | State highway office |
| FM 218 | State highway | 0.8 roadway miles inside | State highway office |
| FM 1467 | State highway | 0.5 roadway miles inside | State highway office |
| US 84 | Highway nearby | 1.2 miles outside | State highway office |
| BNSF Railway | Railroad | 2.69 track miles inside | The railroad |
| Blanket Creek | Stream nearby | 0.3 miles outside | Checked for Corps of Engineers jurisdiction |
| Dry Blanket Creek | Stream nearby | 0.6 miles outside | Checked for Corps of Engineers jurisdiction |
| Groves Branch | Stream nearby | 0.8 miles outside | Checked for Corps of Engineers jurisdiction |
| Dirt House Branch | Stream nearby | 0.9 miles outside | Checked for Corps of Engineers jurisdiction |
BNSF Railway owns 2.69 track miles inside Zephyr, on the Lampasas Subdivision, and public records map four street and rail crossings in the community. A crossing plan needs the railroad’s agreement. No named streams are mapped inside the boundary; Blanket Creek is 0.3 miles away, with Dry Blanket Creek 0.6 miles away. The mapped community also contains 2.21 miles of unnamed drainage. No street crossings of named streams are mapped inside Zephyr, so a proposed route toward a creek needs location specific review.
Do I need a permit to bore in Zephyr, Brown County?
For a crossing beneath US 183, TxDOT cover requirements set the bore depth: electric and communication lines need at least 60 inches at a crossing, and water lines need 60 inches; pressurized sewer lines also need 60 inches. The utility owner files for a right of way permit through TxDOT’s RULIS system, and the TxDOT Brownwood District reviews it. The utility owner also submits for work along FM 590, FM 218 or FM 1467, while we prepare the bore plan and profile and work under its permit. Zephyr has no city government, so county or state authorities handle roads according to who controls them. A BNSF Railway crossing needs the railroad’s agreement. A proposed Blanket Creek crossing is checked for federal jurisdiction during planning.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Who owns the lines near Zephyr Water Supply Corporation?
Zephyr Water Supply Corporation is a local government owned system using purchased surface water. Its records list 2,525 service connections and a population served of 7,575, so a bore near its lines needs careful route coordination. AEP Texas North, Oncor Electric Delivery Company and Comanche County Electric Cooperative Association report electric service in Brown County. We confirm which utility owns the line at the specific Zephyr location before planning an electric conduit bore.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| Zephyr Water Supply Corporation | Public water system | Surface water bought from another system | 2,525 connections, 7,575 people served |
| AEP Texas North, Oncor Electric Delivery Company and Comanche County Electric Cooperative Association | Electric utilities reporting service in Brown County | EIA Form 861 | Confirm the line owner by address |
The American Community Survey 2019 to 2023 five year estimates put Zephyr’s median housing year at 1974. They report 27 percent of housing built before 1960, 58 percent from 1960 to 1999 and 15 percent from 2000 onward. Housing age does not establish the age of buried pipe, but it helps frame replacement work beside FM 590 or US 183. We expose each marked utility by hydrovac before drilling near it; for example, a planned line beneath FM 590 must be checked against the actual buried utilities first.

What is near Zephyr and Brownwood?
Zephyr is an unincorporated community in Brown County, at an elevation of 1,514 feet and covering 1.51 square miles. Its ZIP code is 76890. Early is 9.6 miles northwest, Blanket is 10.0 miles north, and Brownwood is 11.2 miles west. Brownwood is both the nearest larger city and the county seat. From our Yukon yard, the route to Zephyr is 339 road miles and about 6.9 hours of driving. That distance is part of planning mobilization for a bore near US 183 or BNSF Railway.
Places near Zephyr
- Directional boring in Early: 9.6 miles northwest
- Directional boring in Blanket: 10 miles north
- Directional boring in Brownwood: 11.2 miles west
- Directional boring in Mullin: 11.3 miles southeast
- Directional boring in Priddy: 16.5 miles east
Which jobs call for a bore near Zephyr and Blanket Creek?
- Highway crossing: A bore under US 183 can keep pavement intact, with the utility owner arranging the TxDOT right of way permit.
- Road crossing: Work beneath FM 590 or FM 218 can place water or electric conduit without opening the traveled surface.
- Rail crossing: A line beneath BNSF Railway needs an agreement with the track owner before the crossing plan is set.
- Creek route: A proposed bore toward Blanket Creek needs a route review for channel conditions and federal jurisdiction.
- Water service: A connection near Zephyr Water Supply Corporation calls for checking the existing water line before selecting the bore path.
- Drainage crossing: The 2.21 miles of unnamed drainage in Zephyr can affect pit placement and the path of a service bore.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What do you need to quote a Zephyr bore near BNSF Railway?
A map pin beside US 183 or Blanket Creek shows which route and crossing conditions belong in a Zephyr estimate. Send the location, what will go in the ground, the pipe or conduit size and the footage. A sketch or plans help us see pits, pavement and nearby tracks before we set the scope.
Zephyr is 339 road miles from Yukon, so mobilization is part of the job scope. Doudle clay loam and mapped bedrock can change tooling and drilling time. A US 183 crossing or work beside BNSF Railway adds crossing and coordination details, while Blanket Creek or unnamed drainage may affect the route. Pavement, the number of utilities to expose, pits, excavator time and sand backfill also shape the work. High profile or emergency work can require a different plan.
Questions people ask about boring in Zephyr
Does Trinity Boring Solutions take Zephyr, Brown County directional boring jobs?
Yes. We take directional boring work in Zephyr and coordinate it from the first call through the bore log. Our own crews and partner contractors Trinity has vetted can staff the work, with Trinity remaining the point of contact. A route near US 183 or BNSF Railway helps define the crew and crossing plan.
Can a line be bored under Blanket Creek near Zephyr?
A bore can be planned for a proposed route near Blanket Creek, but the actual alignment and channel conditions need review. The creek is 0.3 miles from the mapped community boundary, so the location matters. Creek crossings are checked for U.S. Army Corps of Engineers jurisdiction during planning.
Who runs Zephyr Water Supply Corporation, and where does Zephyr’s water come from?
Zephyr Water Supply Corporation is owned by local government and uses purchased surface water. Its records list 2,525 service connections and 7,575 people served. A planned bore near its water lines needs route coordination so the drilling path accounts for the system’s buried facilities.
Which company owns electric lines for a Zephyr, Brown County conduit bore?
AEP Texas North, Oncor Electric Delivery Company and Comanche County Electric Cooperative Association report electric service in Brown County. That does not establish which company serves a particular Zephyr address. We confirm the line owner before planning a conduit bore near US 183 or FM 590.
Who handles streets in Zephyr, Brown County, and must a bore cut them?
Zephyr is unincorporated and has no city government, so road authority is county or state depending on the road. A bore can pass beneath a road without cutting the surface when the route and permits allow. US 183 and FM 590 are state routes, and TxDOT rules require boring or tunneling beneath existing highways.
Do Zephyr, Brown County homes tell me how old the buried lines are?
No. The American Community Survey 2019 to 2023 estimates give a median housing year of 1974, but housing age does not date buried utilities. Those figures can provide context for replacement work along FM 218 or US 183. We expose marked utilities by hydrovac before drilling near them.
What bore sizes and lengths can Trinity handle in Brown County near Zephyr?
We handle Zephyr work from 3/4 inch service lines up to 48 inch casing, with bore lengths from 10 feet to 5,000 feet. The size and footage for a route near BNSF Railway or US 183 depend on the plans, ground and crossing conditions.
How far ahead do I call Texas811 for a Zephyr, Brown County bore, and what if marks fade?
Count back at least 48 hours from the planned start, excluding Saturdays, Sundays and legal holidays; the request cannot be made more than 14 days ahead. If a Zephyr start slips more than 14 days past the notice, submit a new request. Have worn or moved marks refreshed through Texas811 before work continues near US 183.
What affects the cost of directional boring near US 183 in Zephyr?
The job scope sets the cost, including footage, pipe or conduit size, Doudle soil and mapped bedrock, utility crossings, pavement, pits and equipment time. A US 183 crossing or work near BNSF Railway adds specific crossing conditions. Zephyr’s 339 road miles from Yukon also affect mobilization.
Where the Zephyr facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Zephyr
- U.S. Census Bureau, TIGER/Line 2024: Zephyr boundary, roads, rail lines and streams
- U.S. Census Bureau, 2020 Census: Zephyr population count
- U.S. Census Bureau, American Community Survey 2019 to 2023: Zephyr housing units and year built
- Macrostrat geologic map compilation: map units under Zephyr
- U.S. EPA Safe Drinking Water Information System: public water systems serving Zephyr
- U.S. Department of Transportation, North American Rail Network: track owners in Brown County
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Brown County
- U.S. Geological Survey, Elevation Point Query Service: Zephyr elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Zephyr
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Zephyr
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Zephyr, Texas
Type the address of your job in Zephyr. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Zephyr
Same county: Bangs · Lake Brownwood · Thunderbird Bay · May. All counties: Texas county list.
