trinityboringsolutions.com

Gorman Texas Directional Boring: Demona Soil, Sandy Clay, Railroad Crossings

Quick Answer: Demona loamy sand gives way to sandy clay below, so a bore here must manage loose surface soil and a firmer lower layer. We take directional boring, also called horizontal directional drilling (HDD), in Gorman, Texas, including routes beneath the Fort Worth and Western Railroad. Our Yukon, Oklahoma main office is 283 road miles away, a factor when planning work near Texas State Highway 6. At about 40 inches, sandy clay is mapped across 90 percent of Gorman, where clay can cling to a reamer and load the pipe.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Gorman bores at a glance

  • Incorporated city in Eastland County, Texas. Population 1,004 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 283 miles, about 6.1 hours of driving.
  • Ground: Demona soil is mapped on 49 percent of the area, with sandy clay about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 41 percent of the area.
  • Highways inside the boundary: Texas State Highway 6, FM 8, FM 679, FM 2689 and FM 2921. State permit office: TxDOT Brownwood District.
  • Railroad track inside the boundary: Fort Worth and Western Railroad, with 5 mapped street and rail crossings.
  • Public water: City of Gorman, surface water bought from another system.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Which contractor handles directional boring in Gorman, Eastland County?

Gorman is in Eastland County, where the Census Bureau Vintage 2024 estimate puts the population at 1,004. We install water, sewer, gas, electric conduit and fiber on routes that may follow Crescent Street or cross Texas State Highway 6. The bore plan depends on the line and the route through town.

Our main office is in Yukon, Oklahoma, and Gorman work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. For Gorman planning, our family business history starts in 1965, and we have done directional boring since 1982. That experience covers projects from a 3/4 inch service line to 48 inch casing, including routes near Crescent Street.

Compact Ditch Witch drill rig boring a new utility line across a front yard on a residential street in Edmond, Oklahoma
Our compact Ditch Witch drill boring a new utility line across a front yard on a residential street in Edmond, Oklahoma. Photos on this page are from our jobs in Oklahoma and Texas.

What ground does a bore meet in Gorman’s Demona soil?

The USDA soil survey maps Demona soil across 49 percent of Gorman and Chaney across 41 percent. Their mapped surface textures are loamy sand, part of the 90 percent of the city with that surface texture, and fine sand for the rest. At about 40 inches below the surface, sandy clay is mapped across 90 percent of Gorman. This is a mapped pattern, not a test of a particular route. The loamy sand surface can cut easily but may cave behind the drill, while the clay below can stick to the reamer.

USDA soil survey, inside the Gorman city limitsWhat is mapped
Soil series mappedDemona 49 percent, Chaney 41 percent, Patilo 6 percent and Nimrod 4 percent
Texture at the surfaceloamy sand 90 percent and fine sand 10 percent
Texture about 40 inches downsandy clay 90 percent, fine sand 6 percent and sandy clay loam 4 percent
Engineering class about 40 inches downfat clay (CH) 49 percent, lean clay (CL) 41 percent and silty sand (SM) 6 percent
Average clay content about 40 inches down40 percent
Bedrock mapped within 60 inches41 percent of the area (0 percent hard rock, 41 percent weathered rock)
Seasonal water table within 60 inches59 percent of the area
Flood prone soils0 percent of the area
High corrosion risk for uncoated steel94 percent of the area

In Gorman, weathered bedrock is mapped within 60 inches across 41 percent of the area, though bedrock is not mapped within 40 inches. The Twin Mountains Formation, of Aptian age, includes sandstone and claystone, so a route may meet changing material. Seasonal water tables are mapped within 60 inches across 59 percent of the area, which can leave pits wet. Flood prone soils are not mapped in Gorman. High steel corrosion risk is mapped across 94 percent, so the line owner should address casing and tracer wire materials.

How do we drill Gorman’s sandy clay?

Gorman’s loamy sand surface and sandy clay below call for a bore plan that accounts for both easy cutting and clay that can cling to tooling. Crescent Street access and the route’s marked utilities also shape the sequence.

  1. In Gorman’s loamy sand surface, we use drilling fluid to support the hole, then ream in stages so the soil is less likely to cave behind the tooling.
  2. Where Gorman’s sandy clay is mapped at about 40 inches, we adjust fluid and reaming to limit sticky buildup and watch returns near pavement on Crescent Street.
  3. Because seasonal water tables are mapped within 60 inches in parts of Gorman, we keep pits small and pump as needed when a Kent Street route is wet.
  4. Near the Fort Worth and Western Railroad, we expose marked utilities with hydrovac before approaching them, then track the drill head and log depth and pitch.
Vermeer D24x40 S3 Navigator and water truck at the entry of a 385 foot sandstone rock bore above the wetland in Guthrie, Oklahoma
Our Vermeer D24x40 and water truck at the entry of a 385 foot sandstone rock bore in Guthrie, Oklahoma.

Where might a Gorman line go under the Fort Worth and Western Railroad?

Texas State Highway 6, FM 8, FM 679, FM 2689 and FM 2921 run inside Gorman, so a route in their right of way needs state coordination. Crescent Street is the longest named street in the city, followed by Lubbock Street and Carter Street. Kent Street is another long route to consider. A bore beneath a street or highway can keep its surface intact, but the alignment, access pits and required cover depend on the specific crossing and line.

CrossingTypeMapped extentWho has a say
Texas State Highway 6State highway1.6 roadway miles insideState highway office
FM 8State highway1.7 roadway miles insideState highway office
FM 679State highway0.5 roadway miles insideState highway office
FM 2689State highway0.5 roadway miles insideState highway office
FM 2921State highway0.2 roadway miles insideState highway office
Fort Worth and Western RailroadRailroad1.16 track miles insideThe railroad
Shinoak BranchStream nearby0.4 miles outsideChecked for Corps of Engineers jurisdiction
Ellison Spring BranchStream nearby0.7 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

The Fort Worth and Western Railroad has 1.16 track miles in Gorman, on the Dublin Spur Subdivision. Public records map 5 street and rail crossings in the city, so a route near the tracks needs careful alignment. No named stream is mapped inside Gorman, and no street crossings of named streams are mapped there. Shinoak Branch is 0.4 miles from the city limits and Ellison Spring Branch is 0.7 miles away; either may matter to a route outside town.

Whose approval does Gorman work near Texas State Highway 6 need?

Texas State Highway 6 is a state route, and work in its right of way needs a TxDOT utility permit reviewed by the Brownwood District. The utility that owns the line applies through TxDOT’s RULIS system; we prepare the bore plan and profile and work under the permit issued to that owner. TxDOT sets cover and installation conditions for a crossing. Gorman is incorporated, so city streets such as Crescent Street belong to the city itself. A crossing of the Fort Worth and Western Railroad needs an agreement with that railroad, which sets its crossing conditions. A creek crossing near Shinoak Branch is checked for federal jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

What lines are in place around the City of Gorman water system?

The City of Gorman public water system serves 1,518 people through 506 service connections and uses purchased surface water. That system makes the water line owner relevant when planning a service or crossing near Crescent Street. Electric utilities reporting service in Eastland County are AEP Texas North, Oncor Electric Delivery Company, Texas-New Mexico Power, Comanche County Electric Cooperative Association, Taylor Electric Cooperative and United Electric Cooperative Service. We confirm the owner for the route before planning an electric conduit bore.

Line ownerWhat it isSourceSize
City of GormanPublic water systemSurface water bought from another system506 connections, 1,518 people served
AEP Texas North, Oncor Electric Delivery Company, Texas-New Mexico Power, Comanche County Electric Cooperative Association, Taylor Electric Cooperative and United Electric Cooperative ServiceElectric utilities reporting service in Eastland CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Gorman’s median housing year at 1954; 62 percent of housing was built before 1960 and 4 percent in 2000 or later. That age mix can mean work on an existing line as well as new services along streets such as Kent Street. Before drilling near a marked water or electric line, we use hydrovac potholing to expose it and check its depth rather than relying on surface marks alone.

Exposed underground utility line in a hand dug potholing pit before a directional bore in Oklahoma
An existing utility line exposed in a pothole before a directional bore in Oklahoma.

What places near Carbon can a Gorman crew reach?

Gorman is an incorporated city in Eastland County, with an elevation of 1,450 feet and a land area of 1.64 square miles. ZIP code 76454 covers the city. Carbon is 9.8 miles northwest, De Leon is 10.7 miles southeast, and Eastland is 15.6 miles northwest; Eastland is the county seat. Stephenville, the nearest larger city listed, is 26.4 miles east. The Yukon, Oklahoma main office is 283 road miles away, a drive of 6.1 hours, which affects mobilization for a Crescent Street or highway crossing job.

Places near Gorman

What kinds of Gorman bores could involve Shinoak Branch?

  • Highway crossing: A bore beneath Texas State Highway 6 needs a route and cover plan coordinated with the TxDOT Brownwood District.
  • Water service: A connection near Crescent Street can be planned around the City of Gorman water system and existing marked lines.
  • Fiber route: A conduit bore along Lubbock Street can avoid open cuts while the marked utilities on its path are exposed first.
  • Rail crossing: A line beneath the Fort Worth and Western Railroad needs the railroad’s crossing agreement and its specified conditions.
  • Creek crossing: A route near Shinoak Branch can be checked for jurisdiction during planning before the crossing alignment is set.
  • Electric conduit: Before a bore near Kent Street, we confirm the line owner among utilities reporting service in Eastland County.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What affects the price of a Gorman bore near Crescent Street?

A map pin matters on Crescent Street because the exact start and finish determine which streets, utilities or tracks a Gorman bore may meet. For a Gorman request, send us the address or pin, what will go in the ground, the pipe or conduit size and the footage. A sketch or plans help us understand the route and identify questions before preparing the scope.

The 283 road miles from Yukon shape mobilization for a Gorman job. Demona loamy sand and the mapped sandy clay below affect drilling and reaming; a route near Texas State Highway 6 or the Fort Worth and Western Railroad adds crossing coordination. Pipe size, bore length, exposed utilities, pavement, pits, excavator time, sand backfill and drainage crossings also affect the work. High profile or emergency work can require a different plan.

Questions people ask about boring in Gorman

Does Trinity Boring Solutions take directional boring jobs in Gorman, Eastland County, and who staffs them?

Yes. We take directional boring work in Gorman, Eastland County, and handle the project through our own crews or vetted partner contractor crews. You work with Trinity from the first call through the bore log, regardless of which crew is at the Crescent Street or Texas State Highway 6 site.

Who approves our crossing beneath Texas State Highway 6 in Gorman, so we can plan the bore?

TxDOT reviews the utility permit through its Brownwood District for work in the right of way at Texas State Highway 6. The utility that owns the line files through TxDOT’s RULIS system. We prepare the bore plan and profile for the owner, then work under the permit issued for that Gorman crossing.

What does a bore under the Fort Worth and Western Railroad in Gorman require?

The Fort Worth and Western Railroad owns the 1.16 track miles mapped in Gorman, so a crossing needs an agreement with that railroad. For a Gorman crossing, we use the agreement to identify required casing, depth and flagging conditions. We plan the route around the Dublin Spur Subdivision and coordinate the bore details with the line owner.

Can a line be bored beneath Shinoak Branch near Gorman?

A bore may be planned near Shinoak Branch, which is 0.4 miles from Gorman’s city limits. The route and channel conditions need review before the alignment is chosen, including a check for U.S. Army Corps of Engineers jurisdiction during planning. Ellison Spring Branch is also nearby, 0.7 miles from the limits.

For our Gorman bore planning, who runs the public water system, and where does its purchased surface water come from?

When planning bores in Gorman, we account for the City of Gorman owning the public water system and using purchased surface water. In Gorman, we treat the 506 service connections and 1,518 people served as public water system context when planning underground work. For a new service or a crossing near Crescent Street, we identify and expose marked water lines before the drill approaches them.

Which electric utilities report service in Eastland County near Gorman, and who confirms conduit specs?

AEP Texas North, Oncor Electric Delivery Company, Texas-New Mexico Power, Comanche County Electric Cooperative Association, Taylor Electric Cooperative and United Electric Cooperative Service report service in Eastland County. The owner for a particular Gorman address must be confirmed before planning conduit. The line owner confirms the conduit requirements for a route near Kent Street.

What bore sizes and lengths can Trinity handle for a job near Kent Street in Gorman?

We handle bores from 3/4 inch service lines up to 48 inch casing, with lengths from 10 feet to 5,000 feet. A route near Kent Street still needs a site specific plan: the line size, ground, access and crossings determine which setup fits the work.

How much 811 notice is needed for a Gorman bore near Crescent Street, and what if marks move?

For a bore along Crescent Street, the locate request goes to Texas811 at least 48 hours before excavation starts, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before. For Gorman work, if our start slips more than 14 days past the original notice, we submit a new request. On Gorman work, we refresh worn or moved marks through Texas811 before continuing underground boring.

What affects the cost of directional boring under Texas State Highway 6 in Gorman?

The job scope determines the price for a Texas State Highway 6 crossing in Gorman. Factors include bore length and size, Demona soil and the sandy clay below, utilities that need exposure, pavement, pits, excavator time and backfill. Highway permit conditions and mobilization from Yukon also affect the planned work.

Where the Gorman facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Gorman

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Gorman, Texas

Type the address of your job in Gorman. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Gorman

Same county: Cisco · Rising Star. All counties: Texas county list.