trinityboringsolutions.com

Rising Star Texas Directional Boring: Cisco Soil, US 183 and Copperas Creek

Quick Answer: US 183 and Copperas Creek are the crossings to plan around; Trinity Boring Solutions handles directional boring, also called horizontal directional drilling (HDD), in Rising Star, Texas. Rising Star sits 284 road miles from our Yukon, Oklahoma main office, so a College Street bore needs mobilization planned with the site work. USDA maps Cisco soil across 36% of town, with sandy clay loam common about 40 inches down. That mix can hold a hole but cling to a reamer, so we manage fluid and ream in stages.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Rising Star bores at a glance

  • Incorporated city in Eastland County, Texas. Population 778 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 284 miles, about 6.2 hours of driving.
  • Ground: Cisco soil is mapped on 36 percent of the area, with sandy clay loam about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 3 percent of the area.
  • Highways inside the boundary: US 183 and Texas State Highway 36. State permit office: TxDOT Brownwood District.
  • Railroad track inside the boundary: none mapped.
  • Named streams inside the boundary: Copperas Creek.
  • Public water: City of Rising Star, groundwater wells.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Does anyone handle directional boring on College Street in Rising Star?

Yes. We take directional boring work in Rising Star, Eastland County, where the Census Bureau Vintage 2024 estimate puts the population at 778. Water, sewer, gas, electric conduit and fiber bores can serve properties along College Street or connect across Main Street without opening the whole street. The route and what is already buried set the bore plan.

Our main office is in Yukon, Oklahoma, and Rising Star work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our family business began in 1965, and we have bored utilities since 1982. More than four decades in the trade helps us plan for the sandy surface soils and clay mapped beneath Rising Star.

Trinity Boring Solutions Vermeer D24x40 directional drill set up for a bore
Our Vermeer D24x40 directional drill set up for a bore. Photos on this page are from our jobs in Oklahoma and Texas.

What is Cisco soil like to bore in Rising Star?

The USDA soil survey maps Cisco soil across 36% of Rising Star, with May and Nimrod each covering 20%. At the surface, fine sandy loam accounts for 50% of the mapped area, while loamy fine sand accounts for 23% and fine sand for 22%. About 40 inches down, sandy clay loam is mapped under 77% of the area. We treat the Cisco and May soil series mapped in Rising Star as soil patterns, not test borings. The sand can loosen behind the drill, while the deeper clay can cling to the reamer and pipe.

USDA soil survey, inside the Rising Star city limitsWhat is mapped
Soil series mappedCisco 36 percent, May 20 percent, Nimrod 20 percent, Pedernales 15 percent and Chaney 3 percent
Texture at the surfacefine sandy loam 50 percent, loamy fine sand 23 percent and fine sand 22 percent
Texture about 40 inches downsandy clay loam 77 percent and sandy clay 20 percent
Engineering class about 40 inches downclayey sand (SC) 75 percent, lean clay (CL) 20 percent and fat clay (CH) 3 percent
Average clay content about 40 inches down28 percent
Bedrock mapped within 60 inches3 percent of the area (0 percent hard rock, 3 percent weathered rock)
Seasonal water table within 60 inches25 percent of the area
Flood prone soils1 percent of the area
High corrosion risk for uncoated steel25 percent of the area

Weathered bedrock is mapped within 60 inches in 3% of Rising Star, so the survey does not map bedrock in the top five feet across most of town. A seasonal water table is mapped within 60 inches in 25%, and flood prone soils cover 1%; Copperas Creek still needs site specific planning. High steel corrosion risk is mapped in 25%. The geologic map lists Cenozoic Quartz Sand Decomposition Residuum and Aptian Antlers Sand, so the bore plan should allow for changing sand and clay conditions.

How do we plan a Rising Star bore through sandy clay loam around College Street?

Rising Star’s sandy clay loam at about 40 inches calls for control of both the loose surface sand and the clay below. We set the route, check the marked utilities, then match fluid and reaming to the ground.

  1. We check the bore path along College Street against utility marks first, then hydrovac pothole each marked line so its depth is known before drilling near it.
  2. Where Rising Star’s sandy surface soil could cave behind the bit, we use drilling fluid to support the hole and ream in stages.
  3. In the sandy clay loam mapped at about 40 inches, we manage fluid and reaming to limit clay buildup, then pull the pipe while the hole is ready.
  4. At a Copperas Creek route, we plan the bore below the channel, monitor the head and check the crossing for federal jurisdiction during planning.
Bore pit with a 6 inch PVC sleeve, traffic cones and blue water line flags at NE 24th Street in Oklahoma City
A bore pit with a 6 inch PVC sleeve, traffic cones and blue water line flags at NE 24th Street in Oklahoma City.

Which roads or creeks could a Rising Star bore cross near Copperas Creek?

US 183 runs 1.3 roadway miles inside Rising Star, and Texas State Highway 36 runs 1.4 miles. A bore in either right of way needs a different plan from a service run along a town street. College Street is the longest named street at 1.31 miles, followed by Main Street at 1.28 miles and Pioneer Street at 1.27 miles. Clark Street measures 1.23 miles. The street route and the nearest highway determine where entry and exit pits can sit.

CrossingTypeMapped extentWho has a say
US 183US highway1.3 roadway miles insideState highway office
Texas State Highway 36State highway1.4 roadway miles insideState highway office
Copperas CreekStream1.51 channel miles insideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

No railroad is mapped inside Rising Star or within one mile outside its limits, and no street and rail crossings are mapped. Copperas Creek has 1.51 channel miles in town, with 10 mapped street crossings of named streams. A route near the creek needs depth planned below the channel, and the crossing is checked for U.S. Army Corps of Engineers jurisdiction during planning. We account for Copperas Creek inside town limits, though no lakes or ponds are mapped within one mile.

Who approves a Rising Star bore near US 183?

Rising Star is incorporated, so its city streets belong to the city itself; we do not assume a street cut is approved. For work in the US 183 or Texas State Highway 36 right of way, the utility owner, not the driller, applies through TxDOT’s RULIS system. The TxDOT Brownwood District reviews the application. We give the owner the bore plan and profile and work under the permit issued to that owner. TxDOT requires highway utility lines to be bored or tunneled beneath existing pavement, with casing and the bore extending beneath all travel lanes on rural highways.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

What lines are already in the ground in Eastland County near Rising Star?

We account for US 183 when planning underground work; the public water system serves 765 people through 349 service connections. Before a bore near that system, we expose marked lines with hydrovac potholing so the drill can be planned around their actual depth. Electric utilities reporting service in Eastland County include AEP Texas North, Oncor Electric Delivery Company, Texas-New Mexico Power, Comanche County Electric Cooperative Association, Taylor Electric Cooperative and United Electric Cooperative Service. The line owner must be identified before conduit specifications are set.

Line ownerWhat it isSourceSize
City of Rising StarPublic water systemGroundwater wells349 connections, 765 people served
AEP Texas North, Oncor Electric Delivery Company, Texas-New Mexico Power, Comanche County Electric Cooperative Association, Taylor Electric Cooperative and United Electric Cooperative ServiceElectric utilities reporting service in Eastland CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Rising Star’s median housing year at 1953; 60% of homes were built before 1960, and 8% in 2000 or later. A replacement bore along Main Street may follow older buried services, while a new connection has a different route to plan. We pothole each marked utility on the path before drilling near it, since paint shows position but not depth.

Yellow polyethylene gas pipe pulled through a directional bore beside a commercial building
Yellow polyethylene gas pipe pulled through a directional bore beside a commercial building.

Where is Rising Star near May soil and other places?

Rising Star is in Eastland County, covers 1.73 square miles and sits at an elevation of 1,635 feet. Its ZIP code is 76471. May is 8.5 miles south, Cross Plains is 11.8 miles west, Thunderbird Bay is 13.4 miles south, Carbon is 14.3 miles northeast and Gorman is 19.0 miles northeast. Eastland, the county seat, is 22.8 miles north; Brownwood is 26.6 miles south. Our Yukon yard is 284 road miles away, a 6.2 hour drive, which is part of planning equipment mobilization for a Rising Star bore.

Places near Rising Star

What kinds of bores come up around College Street in Rising Star?

  • Highway crossing: A bore beneath US 183 needs a route and pits planned around the highway right of way and TxDOT permit.
  • Street service: A water or sewer connection along College Street can be bored between dirt pits instead of cutting the full street.
  • Water line: The City of Rising Star system draws groundwater, so a new service route needs potholes around marked water lines.
  • Creek crossing: A Copperas Creek bore needs a planned depth below the channel and a jurisdiction check during planning.
  • Electric conduit: Along Pioneer Street, we first confirm the electric line owner and expose marked utilities on the planned path.
  • Fiber route: A fiber bore near Main Street can use a narrow underground path, with its length and conduit size shaping the setup.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What should I send for a Rising Star quote near Clark Street?

A map pin for Clark Street or the exact Copperas Creek crossing matters because a short change in the route can change the soil, access and utility conflicts. For a College Street crossing, send us what is going in the ground, the pipe or conduit size, and the footage. A sketch or plans help us see where the entry and exit pits can fit.

The price follows the work at the site. Cisco soil and sandy clay loam matter first because the sand can cave while deeper clay can grip the pipe. The number of marked utilities to expose, the pipe size, bore length and any pavement affect the work too. A Copperas Creek crossing adds planning, and work in the US 183 right of way needs its permit process. Mobilization is also shaped by Rising Star’s 284 road miles from Yukon.

Questions people ask about boring in Rising Star

Does Trinity Boring Solutions take jobs in Eastland County near Rising Star, and who staffs them?

Yes. We take directional boring projects in Rising Star and the rest of Eastland County. Our own crews and partner drilling contractors from vetted satellite yards handle the field work, while you work with Trinity from the first call through the bore log. A College Street route still gets planned for its actual ground and utilities.

Who do we list as running Rising Star’s public water system in Eastland County, and do we identify groundwater wells as its source?

We recognize that the City of Rising Star owns the public water system and groundwater wells supply it when planning work along Main Street. We plan underground work with Mayben Street in mind; the system serves 765 people through 349 service connections. A bore near College Street or another water route should be planned around marked lines, with potholing to confirm depth before the drill approaches.

Which electric utilities report service in Eastland County near Rising Star, and who confirms conduit specs?

AEP Texas North, Oncor Electric Delivery Company, Texas-New Mexico Power, Comanche County Electric Cooperative Association, Taylor Electric Cooperative and United Electric Cooperative Service report service in Eastland County. We cannot identify the provider at every Rising Star address from its Eastland County location alone. The line owner needs to be confirmed before conduit size and other specifications are set for a bore.

Who controls Pioneer Street in Rising Star, and does a bore require cutting it?

Rising Star is incorporated, so we treat Main Street and College Street as city streets for planning. A bore along Pioneer Street can often be planned between pits without cutting the street, depending on the route and access. Any highway right of way, such as US 183, follows the TxDOT permit process rather than the city street process.

Could older buried lines near Main Street in Rising Star affect a replacement bore?

They could. The American Community Survey 2019 to 2023 estimates put the median housing year at 1953, with 60% of homes built before 1960. Older properties may have buried services whose depth and route need checking. We pothole marked utilities along a Main Street bore before drilling near them.

Can groundwater or flood prone ground affect bore pits near Copperas Creek in Rising Star?

Yes, site conditions matter. The soil survey maps a seasonal water table within 60 inches in 25% of Rising Star and flood prone soils across 1%. Near Copperas Creek, we plan the route below the channel and account for water in pits; the creek crossing is also checked for federal jurisdiction during planning.

What bore sizes and lengths can Trinity handle near Clark Street in Rising Star?

Along Texas State Highway 36, we handle lines from 3/4 inch service lines up to 48 inch casing, with bore lengths from 10 feet to 5,000 feet. For a Clark Street job, the route, ground and what the line must cross determine the setup. A sketch helps show whether the requested size and length fit the site.

How early should I call Texas811 for a Rising Star bore along College Street, and what if marks move?

Texas law requires the locate request at least 48 hours before excavation starts, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before. For a TxDOT Brownwood District request, if the start slips more than 14 days past the original notice, we make a new request. Worn or moved marks along College Street must be refreshed through Texas811 before work continues.

What affects the cost of a directional bore near US 183 in Rising Star?

The scope sets the price, not just the length. Cisco soil and sandy clay loam affect drilling and reaming; pipe size, bore footage, marked utilities to expose, pavement and any Copperas Creek crossing also matter. Work in the US 183 right of way adds permit planning, and Rising Star’s 284 road miles from Yukon affects mobilization.

Where the Rising Star facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Rising Star

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Rising Star, Texas

Type the address of your job in Rising Star. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Rising Star

Same county: Cisco · Eastland · Ranger. All counties: Texas county list.