Lamesa Texas Directional Boring: Amarillo Fine Sandy Loam, US 87 and 2nd Street
Quick Answer: Lamesa is an incorporated county seat, so 2nd Street is a city street; Trinity Boring Solutions takes directional boring, also called horizontal directional drilling (HDD), work in Texas for road crossings here. US 87 is 412 road miles from our Yukon, Oklahoma main office, so distance is part of planning mobilization. Amarillo fine sandy loam covers most mapped ground, while sandy clay loam at about 40 inches can grip pipe during pullback.
Lamesa bores at a glance
- County seat of Dawson County, Texas. Population 8,108 (Census Bureau 2024 estimate).
- Road distance from our Yukon, Oklahoma main office: 412 miles, about 8 hours of driving.
- Ground: Amarillo soil is mapped on 88 percent of the area, with sandy clay loam about 40 inches down.
- Rock: no bedrock is mapped in the top 60 inches.
- Highways inside the boundary: US 87, US 180, Texas State Highway 137, FM 827 and FM 2592. State permit office: TxDOT Lubbock District.
- Railroad track inside the boundary: none mapped.
- Public water: City of Lamesa, surface water bought from another system.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Which contractor handles directional boring near US 87 in Lamesa?
Lamesa is an incorporated county seat in Dawson County, and the Census Bureau Vintage 2024 estimate lists 8,108 residents. On streets such as 3rd Street and 4th Street, we bore water, sewer, gas, electric conduit or fiber routes beneath pavement when the alignment and access allow. The route and line size shape the bore plan.
Our main office is in Yukon, Oklahoma, and Lamesa work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our family business started in 1965 and has done directional boring since 1982; that size range can suit a service route near 2nd Street or a larger casing specified for a local project.

What ground does Amarillo soil map in Lamesa?
The USDA soil survey maps Amarillo soil across 88% of Lamesa. Amarillo fine sandy loam accounts for 50% of the mapped area on 0 to 1 percent slopes and 38% on 1 to 3 percent slopes. Fine sandy loam is the surface texture across 94% of the city. At about 40 inches below the surface, sandy clay loam is mapped under 99% of the area, with USCS CL covering 95%. These are mapped patterns, not test borings; the clay at depth can cling to a reamer and resist pipe pullback.
| USDA soil survey, inside the Lamesa city limits | What is mapped |
|---|---|
| Soil series mapped | Amarillo 88 percent, Midessa 6 percent and Sprone 3 percent |
| Texture at the surface | fine sandy loam 94 percent and clay loam 3 percent |
| Texture about 40 inches down | sandy clay loam 99 percent |
| Engineering class about 40 inches down | lean clay (CL) 95 percent and clayey sand (SC) 4 percent |
| Average clay content about 40 inches down | 25 percent |
| Bedrock mapped within 60 inches | None mapped |
| Seasonal water table within 60 inches | 0 percent of the area |
| Flood prone soils | 3 percent of the area |
| High corrosion risk for uncoated steel | 0 percent of the area |
The USDA soil survey does not map bedrock within the top five feet or a seasonal water table within 60 inches of the surface in Lamesa. Flood prone soils cover 3% of the mapped area, so a route near drainage needs site review. For Lamesa’s Amarillo, Midessa, and Sprone soil series, we treat high steel corrosion risk as unmapped during bore planning. The geologic map shows the Blackwater Draw Formation, Cenozoic sand with silty and locally clayey material, up to 25 feet thick; Paleocene Cenozoic sedimentary rocks are also mapped. Lamesa’s fine sandy loam surface texture describes broad ground conditions, so we check site conditions before setting a bore plan.
How do we plan a bore in Lamesa’s fine sandy loam, rather than the sandy clay loam described here?
Lamesa’s fine sandy loam over sandy clay loam calls for attention to both the loose surface and the clay richer material below. We choose fluid and reaming steps for the route and its marked utilities.
- Because sandy clay loam is mapped under 99% of Lamesa at about 40 inches, we can use thinner drilling fluid and polymer to limit sticky buildup on the reamer.
- We enlarge the hole in stages through the Amarillo soil profile, then pull the pipe while the finished bore is ready rather than leaving it open.
- Near older blocks such as 3rd Street, we hydrovac marked utilities before the drill approaches; surface paint does not show how deep a line sits.
- We follow the drill head from the surface and log depth and pitch, including on routes near the 3.06 miles of mapped unnamed drainage.

Which roads, tracks or creeks could a bore cross in Lamesa near 2nd Street?
US 87, US 180 and Texas State Highway 137 run within Lamesa, along with FM 827, FM 2592, FM 826 and FM 179. Texas State Highway 349 is 0.5 miles outside the city limits. A bore beneath a state highway needs a planned route that stays below the pavement rather than an open cut. Within the street network, 2nd Street is the longest named street at 3.29 miles, followed by 3rd Street at 3.05 miles and 1st Street at 2.98 miles. 4th Street adds another 2.97 miles of named roadway.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| US 87 | US highway | 5.3 roadway miles inside | State highway office |
| US 180 | US highway | 4.5 roadway miles inside | State highway office |
| Texas State Highway 137 | State highway | 2.5 roadway miles inside | State highway office |
| FM 827 | State highway | 1.3 roadway miles inside | State highway office |
| FM 2592 | State highway | 1.1 roadway miles inside | State highway office |
| FM 826 | State highway | 0.8 roadway miles inside | State highway office |
| FM 179 | State highway | 0.7 roadway miles inside | State highway office |
| Texas State Highway 349 | Highway nearby | 0.5 miles outside | State highway office |
Public records map no railroad inside Lamesa or within 1 mile outside its limits, so there is no mapped track crossing to plan around. No named streams or lakes are mapped in the city or nearby. The records do show 3.06 miles of unnamed drainage within city limits, which calls for checking the actual route and surface drainage before setting bore depth. No street crossings of named streams are mapped in Lamesa.
For a bore under US 87 in Lamesa, do we coordinate approval through TxDOT Lubbock District?
For work in the right of way of US 87, US 180, Texas State Highway 137 or a farm to market road in Lamesa, the utility owner applies for the TxDOT utility permit through RULIS. The TxDOT Lubbock District reviews the application. Along FM 827 in Lamesa, we prepare the bore plan and profile and work under the permit issued to the utility owner. TxDOT requires utility lines beneath an existing highway to be bored or tunneled; the permit sets the required cover and crossing details. Lamesa’s city streets, including 2nd Street, belong to the city. No railroad or named creek crossing is mapped in the city.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Who owns lines in Dawson County near Lamesa?
As Dawson County seat, Lamesa’s public water system serves 9,442 people through 4,916 service connections and uses purchased surface water, shaping our utility coordination. For electric service in Dawson County, Oncor Electric Delivery Company, Southwestern Public Service and Lyntegar Electric Cooperative report service. The line owner for an address near US 87 or 2nd Street needs to be confirmed before planning an electric conduit bore, since county reporting does not identify the provider at each site.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| City of Lamesa | Public water system | Surface water bought from another system | 4,916 connections, 9,442 people served |
| Oncor Electric Delivery Company, Southwestern Public Service and Lyntegar Electric Cooperative | Electric utilities reporting service in Dawson County | EIA Form 861 | Confirm the line owner by address |
The American Community Survey 2019 to 2023 five year estimates put Lamesa’s median year built at 1964; 39% of housing was built before 1960, and 2% was built in 2000 or later. That mix can mean an older service replacement on a street such as 3rd Street as well as new connections. We hydrovac pothole marked utilities on the bore path before drilling near them, since paint shows position, not depth.

Where is Lamesa in relation to Los Ybanez?
Lamesa is the Dawson County seat, at an elevation of 2,985 feet, and covers 5.11 square miles. Its ZIP code is 79331. Los Ybanez is 2.3 miles southeast; Welch is 17.0 miles northwest; O’Donnell is 17.5 miles northeast; and Ackerly is 20.0 miles southeast. Big Spring, the nearest larger city, is 43.7 miles southeast. From our Yukon, Oklahoma main office, Lamesa is 412 road miles away, an 8.0 hour drive, which is part of planning crew mobilization.
Places near Lamesa
- Directional boring in Los Ybanez: 2.3 miles southeast
- Directional boring in Welch: 17 miles northwest
- Directional boring in O’Donnell: 17.5 miles northeast
- Directional boring in Ackerly: 20 miles southeast
- Directional boring in Gail: 29 miles east
- Directional boring in Big Spring: 43.7 miles southeast
Which jobs call for a bore near 3rd Street in Lamesa?
- Highway crossing: A bore beneath US 87 or US 180 avoids cutting through the existing pavement and follows the TxDOT permit plan.
- Street service: A water or sewer line near 2nd Street can pass beneath pavement, with marked utilities exposed before the drill approaches.
- Fiber conduit: A route along 3rd Street can use directional boring to cross paved access without an open cut through the street.
- Water connection: The City of Lamesa public water system serves the area, and a new connection needs a route coordinated with existing lines.
- Drainage route: Near unnamed drainage mapped in Lamesa, the bore plan needs to account for the actual channel and its depth.
- Electric conduit: On a route near 4th Street, the serving line owner is confirmed before conduit size and alignment are planned.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
How do I get a quote for a bore near 4th Street in Lamesa?
For a bore near 4th Street, start with the address or map pin. Tell us what will go in the ground, such as a water line or fiber conduit, then give the pipe or conduit size and footage. A sketch or plans help show the route and nearby pavement, including a possible crossing of US 87.
The price follows the Lamesa route: length and pipe size set the basic scope, while sandy clay loam at depth can affect drilling and pullback. The number of utilities to expose, pavement or concrete, drainage crossings and pit or excavator needs also matter. A bore under US 87 brings highway requirements into the plan. At 412 road miles from Yukon, mobilization is another job factor.
Questions people ask about boring in Lamesa
Does Trinity take directional boring work in Dawson County near Lamesa, and who staffs it?
Yes. We take directional boring projects in Dawson County, including work near US 87, and handle the job with our own crews or crews from partner drilling contractors we have vetted. From the first call through the bore log, we coordinate for 2nd Street work in Lamesa, regardless of which crew is at the site.
What ground should I expect under Amarillo soil in Lamesa?
The USDA soil survey maps Amarillo soil across 88% of Lamesa, mostly as fine sandy loam at the surface. At about 40 inches down, sandy clay loam is mapped under 99% of the area. That deeper clay rich material can build up on a reamer and grip pipe during pullback.
Will a bore in Lamesa run into rock?
Bedrock is not mapped in the top five feet of Lamesa, but that does not rule out deeper rock along a particular route. The geologic map shows the Blackwater Draw Formation and Paleocene Cenozoic sedimentary rocks. A site bore plan still needs to account for conditions beyond the mapped soil profile.
For a bore under US 87 in Lamesa, do we coordinate approval through TxDOT Lubbock District?
For work in the US 87 right of way, the utility owner submits the permit application in TxDOT’s RULIS system. The TxDOT Lubbock District reviews it, and we provide the bore plan and profile for the utility owner’s filing. The permit sets the required crossing details for that location.
Where does Lamesa’s public water come from, and who runs the system?
In Dawson County, we account for the City of Lamesa owning its public water system, which uses purchased surface water, when planning underground work. The City of Lamesa system’s 9,442 people and 4,916 service connections make utility coordination important in our underground work. For a proposed connection near 2nd Street, the route still needs to be checked against existing buried utilities.
Which electric companies report service in Dawson County near Lamesa?
Oncor Electric Delivery Company, Southwestern Public Service and Lyntegar Electric Cooperative report electric service in Dawson County. Those records do not establish which company serves every address near 3rd Street. The line owner needs to be identified before conduit specifications and a bore route are finalized.
What bore sizes and lengths can Trinity handle for a Lamesa job near 4th Street?
We handle lines from 3/4 inch service size up to 48 inch casing, with bore lengths from 10 feet to 5,000 feet. For a route near 4th Street, the needed size and footage depend on what is going underground and the alignment shown in the plans.
How much notice does Texas811 need for a Lamesa bore near 2nd Street?
For a bore near 2nd Street, submit a Texas811 locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before work. If the start slips more than 14 days past the original notice, request a new ticket. If marks are worn or moved along Bryan Avenue, we have them refreshed through Texas811 before continuing work.
What affects the cost of a directional bore near US 87 in Lamesa?
The route length and pipe size matter, as do the sandy clay loam mapped below Lamesa and the number of utilities that must be exposed. Pavement, pits, drainage crossings and excavator time can change the scope. A US 87 crossing also requires planning for TxDOT requirements, and the 412 road miles from Yukon affect mobilization.
Where the Lamesa facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Lamesa
- U.S. Census Bureau, TIGER/Line 2024: Lamesa boundary, roads, rail lines and streams
- U.S. Census Bureau, Vintage 2024 population estimates: Lamesa
- U.S. Census Bureau, American Community Survey 2019 to 2023: Lamesa housing units and year built
- Macrostrat geologic map compilation: map units under Lamesa
- U.S. EPA Safe Drinking Water Information System: public water systems serving Lamesa
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Dawson County
- U.S. Geological Survey, Elevation Point Query Service: Lamesa elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Lamesa
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Lamesa
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Lamesa, Texas
Type the address of your job in Lamesa. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Lamesa
All counties: Texas county list.
