trinityboringsolutions.com

Seminole Texas Directional Boring: Sharvana Soil, US 62 And Avenue G

Quick Answer: Seminole is an incorporated city, so its public streets are city streets; we take directional boring, also called horizontal directional drilling (HDD), for utility routes beneath Avenue G. From our Yukon, Oklahoma main office, Seminole is 432 road miles away, and US 62 is one route a project may need to cross. USDA maps Sharvana fine sandy loam across 42 percent of the city, with gravelly material deeper down that can cave behind a drill head.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Seminole bores at a glance

  • County seat of Gaines County, Texas. Population 7,386 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 432 miles, about 8.4 hours of driving.
  • Ground: Sharvana soil is mapped on 45 percent of the area, with extremely gravelly sandy loam about 40 inches down.
  • Rock: no bedrock is mapped in the top 60 inches.
  • Highways inside the boundary: US 62, US 385, US 180, FM 181 and Texas State Highway 214. State permit office: TxDOT Lubbock District.
  • Railroad track inside the boundary: none mapped.
  • Public water: City of Seminole, groundwater wells.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who can I call for directional boring near Avenue G in Seminole?

Seminole is the incorporated county seat of Gaines County, with 7,386 residents in the Census Bureau Vintage 2024 estimate. We install water, sewer, gas, electric conduit and fiber for routes that can pass beneath Avenue F, connect properties along US 385, or reach service points near the City of Seminole groundwater system.

Our main office is in Yukon, Oklahoma, and Seminole work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our longest bore was roughly 4,100 feet of 48 inch pipe under the Arkansas River in Tulsa. A typical route near Avenue G is shorter and shaped by local utilities and ground. Our family business began in 1965 and has done directional boring since 1982, and we plan Seminole work with Gaines County in mind.

Aerial view of a Trinity Boring Solutions directional drill set up for a gas line bore at a commercial site
Our directional drill set up for a gas line bore at a commercial site, seen from above. Photos on this page are from our jobs in Oklahoma and Texas.

What does Sharvana soil mean for a bore in Seminole?

The USDA soil survey maps Sharvana soil across 45 percent of Seminole, with Sharvana fine sandy loam on 42 percent of the mapped area. Patricia fine sand covers another 27 percent. At about 40 inches below the surface, extremely gravelly sandy loam is mapped under 45 percent of the city, while sandy clay loam is mapped under 38 percent. The survey estimates an average clay content of 17 percent at that depth and maps 83 percent of the area as sandy. These are mapped patterns, so a route still needs field checks.

USDA soil survey, inside the Seminole city limitsWhat is mapped
Soil series mappedSharvana 45 percent, Patricia 27 percent, Brownfield 7 percent, Kimberson 7 percent and Arvana 5 percent
Texture at the surfacefine sandy loam 42 percent, fine sand 38 percent and loamy fine sand 12 percent
Texture about 40 inches downextremely gravelly sandy loam 45 percent, sandy clay loam 38 percent and cemented material 7 percent
Engineering class about 40 inches downsilty gravel (GM) 42 percent, clayey sand (SC) 38 percent and clayey gravel (GC) 5 percent
Average clay content about 40 inches down17 percent
Bedrock mapped within 60 inchesNone mapped
Seasonal water table within 60 inches0 percent of the area
Flood prone soils0 percent of the area
High corrosion risk for uncoated steel0 percent of the area

Bedrock is not mapped within the top five feet in Seminole, though that does not rule out deeper rock. Seasonal water tables and flood prone soils are not mapped, and high steel corrosion risk is not mapped. The Blackwater Draw Formation, of Pleistocene age, includes sand that can be locally clayey and calcareous; the map also shows Cenozoic sedimentary rocks of Paleocene age. Gravelly soil can fall in behind the bit, so staged reaming and fluid that supports the hole matter more here than a bedrock tool assumption.

What does it take to bore Seminole’s extremely gravelly sandy loam?

Seminole’s mapped sandy and gravelly layers can loosen behind the drill. Along a route near Avenue G, we plan the bore around the soil, expose marked utilities and keep the pipe ready for the final pass.

  1. Sharvana fine sandy loam covers 42 percent of Seminole’s mapped area; we check the actual route because the survey describes mapped soil, not a site boring.
  2. Where the route encounters the mapped gravelly layer near Avenue G, staged reaming and a supporting drilling fluid help limit the chance of the hole caving.
  3. Before drilling near Avenue F, we hydrovac pothole marked utilities on the bore path; surface marks show position, not the depth of each line.
  4. We track the drill head from the surface and log depth and pitch as a bore advances beneath US 62 or another paved route.
Trinity Boring Solutions water trailer supplying water for bentonite drilling fluid on a sleeve bore in northeast OKC
Our water trailer feeding the bentonite drilling fluid mix on a sleeve bore in northeast Oklahoma City.

Which roads or drainage routes might a bore cross near Avenue G in Seminole?

US 62, US 385 and US 180 run through Seminole, along with FM 181 and Texas State Highway 214. Their mapped roadway lengths inside the city are 4.9, 4.4, 2.5, 0.8 and 0.7 miles, respectively. Avenue G is the longest named street at 3.22 miles; Avenue F and Avenue B each run 3.15 miles, and 5th Street runs 2.83 miles. Those streets and highways give a route planner several paved approaches to consider, with the exact crossing depending on the property and utility path.

CrossingTypeMapped extentWho has a say
US 62US highway4.9 roadway miles insideState highway office
US 385US highway4.4 roadway miles insideState highway office
US 180US highway2.5 roadway miles insideState highway office
FM 181State highway0.8 roadway miles insideState highway office
Texas State Highway 214State highway0.7 roadway miles insideState highway office
Swipe the table sideways to see every column.

No railroad is mapped inside Seminole or within 1 mile outside its limits, so a track crossing is not part of the mapped local route picture. No named stream is mapped in the city or nearby, and no street crossing of a named stream is mapped. The city has 1.46 miles of unnamed drainage, which deserves a site check if a proposed route approaches a channel. No lakes or ponds are mapped within 1 mile of Seminole, so we focus bore planning on local soil conditions such as Sharvana.

Who approves a bore near US 62 in Seminole?

Seminole’s incorporated streets, including Avenue G, are city streets. TxDOT handles work in the right of way for US 62, US 385, US 180, FM 181 and Texas State Highway 214. The line owner, not the driller, files through TxDOT’s online RULIS system; we prepare the bore plan and profile for the filing, and TxDOT’s Lubbock District reviews it. Existing highway pavement is crossed by boring or tunneling. Electric and communication lines need 60 inches of cover at crossings and 48 inches along the right of way; water needs 60 inches at crossings and 36 inches along it. Pressurized sewer needs 60 inches at crossings. The permit may set another depth. Open trenching through intersecting roads or driveways needs written approval from the district engineer. A proposed channel crossing near Seminole is checked for Corps jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Whose lines are already buried in Gaines County around Seminole?

The City of Seminole public water system draws from groundwater wells and reports 3,000 service connections serving 7,386 people. That makes its water routes relevant when planning a new service near Avenue B, though the exact address determines which lines a bore must clear. Electric service reporting for Gaines County lists Oncor Electric Delivery Company, Southwestern Public Service, Lea County Electric Cooperative and Lyntegar Electric Cooperative. Before conduit work near US 385, identify the line owner for that location and confirm the conduit requirements with them.

Line ownerWhat it isSourceSize
City of SeminolePublic water systemGroundwater wells3,000 connections, 7,386 people served
Oncor Electric Delivery Company, Southwestern Public Service, Lea County Electric Cooperative and Lyntegar Electric CooperativeElectric utilities reporting service in Gaines CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Seminole’s median housing year at 1974; 13 percent of homes were built before 1960, 70 percent from 1960 to 1999 and 17 percent in 2000 or later. A replacement bore near Avenue F may need to clear older water or electric lines, while newer services can call for a different route. Hydrovac potholing exposes marked utilities before drilling near them, since surface paint shows position but not depth.

Reel of yellow polyethylene gas pipe on a trailer staged for a directional bore
A reel of yellow polyethylene gas pipe on a trailer, staged for a directional bore.

What is near Seminole, including Seagraves?

Seminole is in Gaines County, covers 4.16 square miles and sits at an elevation of 3,310 feet. Its ZIP code is 79360. Seagraves is 16.0 miles north, Loop is 19.0 miles northeast, Denver City is 20.0 miles northwest and Andrews is 28.3 miles south. Seminole is the county seat; Andrews is a nearby larger place, 28.3 miles south. The Yukon, Oklahoma yard is 432 road miles away, a drive of 8.4 hours. That distance is part of planning a project along US 62, particularly if equipment or excavator time is needed on site.

Places near Seminole

What boring work comes up near Avenue F in Seminole?

  • Highway crossing: A route beneath US 62 is planned as a bore or tunnel under existing pavement, with the line owner’s permit in place.
  • Water service: A new connection near Avenue B can tie into the City of Seminole groundwater system after the route and nearby lines are checked.
  • Fiber route: A run along Avenue F can use a bore to avoid opening the paved street, subject to the planned path and utility locations.
  • Electric conduit: Near US 385, confirm the electric line owner and conduit requirements before setting a route through the right of way.
  • Drainage crossing: A route near Seminole’s 1.46 miles of unnamed drainage needs a site check to keep the bore path beneath the channel.
  • Service replacement: A bore near 5th Street can replace an older service without cutting the street, with potholing to locate marked lines first.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What should I send for a Seminole quote near 5th Street?

A pin matters on 5th Street because the route and nearby utilities can change from one block to the next. Send the job address or map pin, what will go underground, the pipe or conduit size and the planned footage. A sketch or plans help us assess crossings along Avenue G, US 62 or a drainage route.

The trip from Yukon is 432 road miles, so mobilization is part of a Seminole job’s scope. The Sharvana and gravelly soil maps affect how we support the bore hole. Price also reflects length, pipe or conduit size, and how many utilities must be exposed. A US 62 crossing, concrete or pavement, drainage, pits, excavator time, sand backfill, emergency timing and the distance to the work site all change the work required.

Questions people ask about boring in Seminole

Does Trinity take directional boring jobs in Gaines County near Seminole, and who staffs them?

Yes. We take directional boring work in Seminole and across Texas, 432 road miles from our Yukon main office. Our crews handle the work, with satellite yards run by partner drilling contractors we have personally vetted. You work with Trinity from the first call through the bore log, whether the crew reaches the job from Yukon or a partner yard.

For a bore under US 62 in Seminole, is the TxDOT Lubbock District the state permit office?

For work in the US 62 right of way, TxDOT reviews the line owner’s utility permit application through RULIS. We prepare the bore plan and profile for that filing, and the TxDOT Lubbock District reviews the application. The line owner files it, not the drilling contractor.

Who runs Seminole’s public water system, and where does its water come from for planning a bore near Main Street?

The City of Seminole owns and runs the public water system, which uses groundwater wells. Public records report 3,000 service connections serving 7,386 people. A bore near Avenue B still needs a route check to identify nearby water lines before drilling.

Which electric companies report service in Gaines County near Seminole, and who confirms conduit specs?

Oncor Electric Delivery Company, Southwestern Public Service, Lea County Electric Cooperative and Lyntegar Electric Cooperative report electric service in Gaines County. The specific line owner can vary by location, so identify it for the Avenue F route and confirm conduit requirements with that owner before planning the bore.

Who controls Avenue B in Seminole, and does a bore require cutting the street?

Seminole is an incorporated city, so its public streets, including Avenue B, belong to the city. A directional bore can pass beneath pavement without cutting across the street. The route still needs utility checks, and work in a state highway right of way such as US 62 follows TxDOT’s permit process.

Does the housing age near Avenue F in Seminole affect replacement bores?

It can affect what a route needs to avoid. The American Community Survey 2019 to 2023 five year estimates give Seminole a median housing year of 1974, with 13 percent of homes built before 1960. Near Avenue F, we expose marked utilities before drilling so a replacement line can be planned around existing services.

How far is Seminole from Trinity’s Yukon, Oklahoma main office, and what does that change?

Seminole is 432 road miles from our Yukon, Oklahoma main office, with a listed drive of 8.4 hours. That distance can affect mobilization for work along US 385 or Avenue G, especially when a job needs equipment, an excavator or additional site time.

How early should I call Texas811 for a bore near Avenue G in Seminole, and what if marks move?

Request locates at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before the start. If a bore near Avenue G slips more than 14 days past the original notice, make a new request. Before work continues near Avenue F in Seminole, we have worn or moved marks refreshed through Texas811.

Could local Sharvana soil conditions affect the cost of a directional bore under US 62 in Seminole?

The scope sets the price: length, pipe or conduit size, ground conditions and the number of utilities to expose all matter. A US 62 crossing can involve pavement and right of way requirements, while Seminole’s distance from Yukon affects mobilization. Pits, excavator time, drainage crossings and emergency timing can also change the work.

Where the Seminole facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Seminole

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Seminole, Texas

Type the address of your job in Seminole. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Seminole

All counties: Texas county list.