Mentone Texas Directional Boring: Tencee Soil, Highway 302 And Alluvium
Quick Answer: Trinity Boring Solutions takes directional boring, also called horizontal directional drilling (HDD), across Texas for routes such as Texas State Highway 302 in Mentone. The Mentone work area is 548 road miles from our Yukon, Oklahoma main office, with Pecos Street among the local routes to plan around. Tencee soil is mapped as very gravelly sandy clay loam at about 40 inches, so loose gravel can cave behind the drill or push it off line. A bore can pass beneath Dallas Street without cutting its surface.
Mentone bores at a glance
- County seat of Loving County, Texas. Population 22 (2020 Census count).
- Road distance from our Yukon, Oklahoma main office: 548 miles, about 10.6 hours of driving.
- Ground: Tencee soil is mapped on 62 percent of the area, with very gravelly sandy clay loam about 40 inches down.
- Rock: no bedrock is mapped in the top 60 inches.
- Highways inside the boundary: Texas State Highway 302. State permit office: TxDOT Odessa District.
- Railroad track inside the boundary: none mapped.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Who can I call for directional boring beneath Texas State Highway 302 in Mentone?
Trinity Boring Solutions takes directional boring work in Mentone, Loving County, where the 2020 Census counted 22 people. For a route along Dallas Street or Texas State Highway 302, we can install water, sewer, gas, electric conduit and fiber lines by bore, with the line owner and route confirmed before work is planned.
Our main office is in Yukon, Oklahoma, and Mentone work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our longest bore reached roughly 4,100 feet with 48 inch pipe beneath the Arkansas River in Tulsa, Oklahoma. For scale, a service line planned beneath Pecos Street is a different scope, shaped by its route and ground.

What does the soil survey show about Mentone and Tencee soil?
The USDA soil survey maps Tencee soil across 62 percent of Mentone and Turney loam across 38 percent. At about 40 inches below the surface, the Tencee mapped area is very gravelly sandy clay loam, while the Turney area is loam. The survey reports an average clay content of 24 percent at that depth, and gravelly ground across 62 percent of the mapped area. Mapped Tencee and Turney soil patterns inform our Mentone planning, but they are not test borings. For a bore near Dallas Street, the gravel matters because the hole may cave behind the drill and gravel can knock the head off line.
| USDA soil survey, inside the Mentone mapped community boundary | What is mapped |
|---|---|
| Soil series mapped | Tencee 62 percent and Turney 38 percent |
| Texture at the surface | gravelly loam 62 percent and loam 38 percent |
| Texture about 40 inches down | very gravelly sandy clay loam 62 percent and loam 38 percent |
| Engineering class about 40 inches down | clayey gravel (GC) 62 percent and lean clay (CL) 38 percent |
| Average clay content about 40 inches down | 24 percent |
| Bedrock mapped within 60 inches | None mapped |
| Seasonal water table within 60 inches | 0 percent of the area |
| Flood prone soils | 0 percent of the area |
| High corrosion risk for uncoated steel | 0 percent of the area |
Bedrock is not mapped in the top five feet of Mentone, but that does not rule out rock deeper down. The mapped geology includes Alluvium of Holocene age and Cenozoic sedimentary rocks of Paleocene age, so the drill plan still needs to respond to what it meets. Seasonal water table, flood prone soils and high steel corrosion risk are not mapped. That lowers those mapped concerns for a route near Texas State Highway 302, but actual conditions still need checking on site.
How do we drill Mentone’s very gravelly sandy clay loam?
In Mentone, we would plan a bore for the very gravelly Tencee ground, where gravel can cave behind the bit and knock the drill head off line. Dallas Street is one local route where those conditions matter.
- On a Tencee route near Dallas Street, we stage pipe before the final ream because gravelly ground can cave behind the drill head.
- The Tencee mapped texture at about 40 inches is very gravelly sandy clay loam, so we ream in stages and track depth and pitch at each rod.
- Before the drill nears a marked line on Barstow Street, we hydrovac pothole it because surface paint shows position, not depth.
- For a Texas State Highway 302 crossing, we keep the bore profile tied to the required cover and use boring beneath existing pavement.

What is in the way of a new line beneath Dallas Street in Mentone?
Texas State Highway 302 has 0.2 mapped roadway miles inside Mentone, so a bore under its pavement needs a plan that meets TxDOT requirements. Dallas Street is the longest named local street at 0.41 miles, followed by Pecos Street at 0.37 miles and Barstow Street at 0.26 miles. El Paso Street and Collins Street each measure 0.25 miles. These road lengths help identify a route, but the actual bore path and any paved crossings need to be checked against the job plans.
No railroad is mapped inside Mentone or within one mile outside the mapped community boundary, and no street and rail crossing is mapped there. No named stream or lake is mapped inside Mentone, though 0.97 miles of unnamed drainage is mapped within the community. That drainage may affect a route near Dallas Street, so the site plan should identify any channel crossing before the bore is set.
Do I need a permit to bore under a road in Mentone, Loving County?
Mentone has no city government, so public street approvals fall to the county and state highway work falls to TxDOT. For Texas State Highway 302, the cover depth sets the bore profile: electric and communication lines need 60 inches below the lowest crossed grade, and water lines need 60 inches; pressurized sewer lines also need 60 inches. The utility owner files the highway right of way application through TxDOT’s RULIS system, and the TxDOT Odessa District reviews it. Trinity prepares the bore plan and profile for that owner. No railroad is mapped near Mentone.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
What is already in the ground in Mentone, Loving County?
The water provider serving a specific Mentone address has to be confirmed with the county or local water district before a bore is planned. EPA drinking water records do not tie a water system to this place. Oncor Electric Delivery Company reports electric service in Loving County, but the owner of lines along Dallas Street must be confirmed before an electric conduit bore is designed.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| Oncor Electric Delivery Company | Electric utilities reporting service in Loving County | EIA Form 861 | Confirm the line owner by address |
Housing figures are not published for a place as small as Mentone, so a route along Barstow Street could involve either a new service or a replacement line. The county averages 11.6 inches of precipitation a year, with September the wettest month at 2.0 inches on average and February the driest at 0.4. Before drilling near marked lines, we hydrovac pothole them to check their depth; paint alone does not show how deep a utility sits.

What is near Mentone and Barstow in Loving County?
Mentone is the county seat of Loving County, at an elevation of 2,686 feet, and covers 0.17 square miles within its mapped community boundary. ZIP code 79754 serves the area. Barstow is 20.8 miles southeast, and the Town of Pecos is 22.2 miles south; Pecos is the nearest larger city. Lindsay is 23.7 miles south, Wink is 26.3 miles east and Toyah is 29.6 miles southwest. The route from our Yukon yard is 548 road miles and a 10.6 hour drive, which affects mobilization for work near Texas State Highway 302.
Places near Mentone
- Directional boring in Barstow: 20.8 miles southeast
- Town of Pecos: 22.2 miles south
- Lindsay: 23.7 miles south
- Directional boring in Wink: 26.3 miles east
- Directional boring in Toyah: 29.6 miles southwest
What would we bore near Barstow Street in Mentone?
- Water service: A route beneath Pecos Street can carry a new service while keeping the street surface uncut.
- Highway crossing: A Texas State Highway 302 bore needs a profile that meets TxDOT cover requirements beneath the travel lanes.
- Fiber conduit: A conduit route near Dallas Street can pass below pavement, with marked utilities exposed before drilling close by.
- Sewer line: A bore near Barstow Street can carry sewer while the route and pipe size are set from the plans.
- Drainage crossing: A route near the 0.97 miles of unnamed drainage needs its channel location checked before the bore is laid out.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What drives the price of a bore near El Paso Street in Mentone?
For a Mentone quote, start with the address or map pin on El Paso Street or another route, then tell us what will go underground. Include the pipe or conduit size and planned footage. A sketch or plans can show the route past Texas State Highway 302, pavement, drainage or other marked utilities, so we can scope the bore and access.
The 548 road miles from Yukon affect mobilization for a Mentone job, while Tencee’s gravelly ground can change the drilling plan. Price also reflects bore length and pipe size, the utilities to expose, and any crossing beneath Texas State Highway 302. Pavement, pits, excavator time, sand backfill, drainage crossings and high profile or emergency work can add to the scope near El Paso Street.
Questions people ask about boring in Mentone
Does Trinity take directional boring work in Mentone and Loving County, and who staffs it?
We take directional boring work in Mentone, with our own crews and partner contractor crews from satellite yards. Our Yukon office coordinates the job from the first call through the bore log, including a route along Dallas Street. The crew assignment depends on the work, but your contact with Trinity stays consistent.
What does Tencee soil mean for a bore in Mentone?
The USDA soil survey maps Tencee across 62 percent of Mentone, with very gravelly sandy clay loam at about 40 inches. Gravel can make the hole cave behind the bit and can knock the head off line. A bore near Pecos Street needs staged reaming and frequent checks of depth and pitch.
Will a bore in Mentone’s gravelly loam hit rock?
Bedrock is not mapped in Mentone’s top five feet, but that does not rule out rock deeper down. The geologic map shows Holocene Alluvium and Paleocene Cenozoic sedimentary rocks. A route near Texas State Highway 302 still needs to be planned for changing ground as drilling advances.
Who approves a bore beneath Texas State Highway 302 in Mentone?
TxDOT reviews a Texas State Highway 302 utility permit through the Odessa District. The utility owner submits the application in RULIS, with the bore plan and profile prepared for it. Cover requirements set the depth, including 60 inches for electric or communication crossings, water crossings and pressurized sewer crossings.
Who owns electric lines in Mentone, Loving County, before I plan conduit?
Oncor Electric Delivery Company reports electric service in Loving County, but that does not identify the owner at every Mentone address. Confirm the line owner for the specific route, such as Dallas Street, before planning a conduit bore. That confirmation helps set the conduit path and identify which marked utilities must be exposed.
Who is in charge of Mentone streets such as Barstow Street, and must we cut one?
Mentone is unincorporated and has no city government, so public street approvals belong to the county rather than a city department. A bore beneath Barstow Street can avoid cutting the pavement. The route still needs to be checked with the county authority and coordinated with marked utilities.
Can I reach Trinity after hours about an urgent Mentone bore near Barstow Street?
Yes. For planning a bore in Loving County, we answer Trinity’s phone 24 hours a day at (405) 409-7423. If the urgent work is near Barstow Street, have the address or map pin and the line or conduit involved ready so we can discuss the route and immediate scope.
How early should I call Texas811 for a Mentone bore along Dallas Street, and what if marks move?
For a bore along Dallas Street, the locate request goes to Texas811 at least 48 hours before excavation starts, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days ahead. For permits through TxDOT Odessa District, we make a new request if the start slips more than 14 days past the original notice. Along Pecos Street, we refresh any worn or moved marks through Texas811 before continuing work.
What affects the cost of a Mentone bore beneath Texas State Highway 302?
The route, footage, pipe or conduit size and ground all affect a Texas State Highway 302 bore. Tencee gravel, highway cover requirements, pavement and utilities to expose can change the work. The 548 road miles from Yukon also affect mobilization, along with pits, excavator time, drainage crossings and any high profile or emergency conditions.
Where the Mentone facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Mentone
- U.S. Census Bureau, TIGER/Line 2024: Mentone boundary, roads, rail lines and streams
- U.S. Census Bureau, 2020 Census: Mentone population count
- U.S. Census Bureau, American Community Survey 2019 to 2023: Mentone housing units and year built
- Macrostrat geologic map compilation: map units under Mentone
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Loving County
- U.S. Geological Survey, Elevation Point Query Service: Mentone elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Mentone
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Mentone
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Mentone, Texas
Type the address of your job in Mentone. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Mentone
All counties: Texas county list.
