New Waverly Texas Directional Boring: Annona Soil, Interstate 45 And Chicken Creek
Quick Answer: The City of New Waverly owns its groundwater based water system, while several utilities report electric service in Walker County, so we confirm the line owner before planning a conduit bore. Trinity Boring Solutions handles directional boring, also called horizontal directional drilling (HDD), in Texas for routes such as Interstate 45 crossings. New Waverly is 403 road miles from our Yukon office, a distance to consider alongside Union Pacific track crossings. Annona soil and heavy clay mapped below the surface can stick to the reamer and grip pipe, so the bore plan and drilling pace matter.
New Waverly bores at a glance
- Incorporated city in Walker County, Texas. Population 1,014 (Census Bureau 2024 estimate).
- Road distance from our Yukon, Oklahoma main office: 403 miles, about 7.7 hours of driving.
- Ground: Annona soil is mapped on 46 percent of the area, with clay about 40 inches down.
- Rock: bedrock is mapped within 60 inches on 2 percent of the area.
- Highways inside the boundary: Interstate 45, FM 1375, Texas State Highway 150 and Texas State Highway 75. State permit office: TxDOT Bryan District.
- Railroad track inside the boundary: Union Pacific, with 2 mapped street and rail crossings.
- Named streams inside the boundary: Chicken Creek and Little Caney Creek.
- Public water: City of New Waverly, groundwater wells.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Who does directional boring in New Waverly, Walker County?
Trinity Boring Solutions takes directional boring work in New Waverly, Walker County, where the Census Bureau Vintage 2024 estimate puts the population at 1,014. Along Front Street or Old Houston Road, our crews install water, sewer, gas, electric conduit and fiber lines by boring beneath the route instead of opening the full street. The line owner and the route determine the plan before drilling begins.
Our main office is in Yukon, Oklahoma, and New Waverly work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our longest bore was roughly 4,100 feet of 48 inch pipe beneath the Arkansas River in Tulsa. A typical New Waverly bore near Interstate 45 is smaller, but still needs a route planned around local clay and crossings. We are a family business started 1965, and we have done directional boring since 1982.

What does the soil survey show about New Waverly and Annona soil?
The USDA soil survey maps Annona fine sandy loam across 46 percent of New Waverly, with Redco clay mapped across 25 percent and Leson clay across 19 percent. Gowker and Kanebreak soils, frequently flooded, account for 6 percent. At about 40 inches below the surface, clay is the mapped texture across 93 percent of the area, and the average clay content at that depth is 55 percent. These are mapped soil patterns, not test borings, so the exact route still needs to be checked. The survey maps no sandy ground at that depth, which means a bore plan should account for clay that can cling to tooling and pipe.
| USDA soil survey, inside the New Waverly city limits | What is mapped |
|---|---|
| Soil series mapped | Annona 46 percent, Redco 25 percent, Leson 19 percent and Gowker 6 percent |
| Texture at the surface | fine sandy loam 47 percent, clay 46 percent and clay loam 6 percent |
| Texture about 40 inches down | clay 93 percent and clay loam 6 percent |
| Engineering class about 40 inches down | fat clay (CH) 93 percent and lean clay (CL) 7 percent |
| Average clay content about 40 inches down | 55 percent |
| Bedrock mapped within 60 inches | 2 percent of the area (0 percent hard rock, 2 percent weathered rock) |
| Seasonal water table within 60 inches | 53 percent of the area |
| Flood prone soils | 6 percent of the area |
| High corrosion risk for uncoated steel | 100 percent of the area |
The USDA soil survey maps a seasonal water table within 60 inches across 53 percent of New Waverly, so pits near Chicken Creek may need pumping and careful placement. Flood prone soils account for 6 percent of the mapped area; a creek route needs depth planning and a check for U.S. Army Corps of Engineers jurisdiction. High steel corrosion risk is mapped across the area, a concern for steel casing and tracer wire that the line owner should address. The geologic map identifies the Miocene Fleming Formation of clay and sandstone. Bedrock is mapped within 60 inches in only 2 percent of the area, so the survey does not show shallow bedrock as widespread.
What does it take to bore through New Waverly clay?
New Waverly’s mapped clay calls for controlled drilling and staged reaming, not a fast pull through the ground. Near Chicken Creek, we also plan pits for the mapped seasonal water table and keep the bore below the channel.
- We expect clay cuttings to cling around Annona and Redco mapped soils, so we use a thinner drilling fluid with polymer and open the hole in stages.
- Because heavy clay can hold pressure beneath Interstate 45 pavement, we watch fluid returns and adjust drilling to avoid lifting the surface.
- We hydrovac expose marked utilities along Front Street before drilling close to them; locate paint shows a line’s position, not its depth.
- With a seasonal water table mapped near Chicken Creek, we keep pits small and pump them as needed while planning the bore below the channel.

What does a bore have to cross in New Waverly near Interstate 45?
Interstate 45, FM 1375, Texas State Highway 150 and Texas State Highway 75 all run within New Waverly, so a route crossing them needs highway coordination. TxDOT rules call for boring or tunneling beneath existing highway pavement, and rural highway bores extend beneath all travel lanes. Front Street, Gibbs Street and Old Houston Road are among the city’s longest named streets. A bore there can keep pavement intact, but the utility route, marked lines and available pit locations still shape the plan.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| Interstate 45 | Interstate | 1.2 roadway miles inside | State highway office |
| FM 1375 | State highway | 3.2 roadway miles inside | State highway office |
| Texas State Highway 150 | State highway | 1.7 roadway miles inside | State highway office |
| Texas State Highway 75 | State highway | 1.5 roadway miles inside | State highway office |
| Union Pacific | Railroad | 1.5 track miles inside | The railroad |
| Chicken Creek | Stream | 1.69 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Little Caney Creek | Stream | 1.01 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Rocky Creek | Stream nearby | 0.6 miles outside | Checked for Corps of Engineers jurisdiction |
| Boswell Creek | Stream nearby | 0.8 miles outside | Checked for Corps of Engineers jurisdiction |
Union Pacific has 1.5 track miles inside New Waverly, and public mapping shows 2 street and rail crossings. A route under those tracks needs the railroad’s crossing agreement. Chicken Creek runs 1.69 channel miles through the city, and Little Caney Creek runs 1.01; mapped street crossings of named streams total 5. Those creek crossings need depth planning and a check for U.S. Army Corps of Engineers jurisdiction. No lakes or ponds are mapped within one mile of the city.
Who approves a New Waverly bore near Union Pacific tracks?
For a New Waverly route on Interstate 45, FM 1375, Texas State Highway 150 or Texas State Highway 75, the utility that owns the line files the TxDOT utility permit through RULIS, not the drilling contractor. We give that owner the bore plan and profile, and the TxDOT Bryan District reviews the application. Union Pacific track crossings need an agreement from the railroad; if the line also occupies highway right of way, TxDOT asks for a copy. TxDOT cover rules set minimum depths by line type, including 60 inches for electric and communication lines at highway crossings and 60 inches for water lines there. A Chicken Creek crossing is checked for Corps jurisdiction during planning.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Which utilities are in the ground in New Waverly near the City of New Waverly water system?
The City of New Waverly public water system uses groundwater wells and reports 517 service connections serving 1,125 people. That is a useful starting point for a water bore, but the line owner and route still need confirmation. Utilities reporting electric service in Walker County are Entergy Texas, Houston County Electric Cooperative, Mid-South Electric Cooperative Association and Sam Houston Electric Cooperative. We confirm the owner for the specific address before planning an electric conduit bore near Gibbs Street or another local route.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| City of New Waverly | Public water system | Groundwater wells | 517 connections, 1,125 people served |
| Entergy Texas, Houston County Electric Cooperative, Mid-South Electric Cooperative Association and Sam Houston Electric Cooperative | Electric utilities reporting service in Walker County | EIA Form 861 | Confirm the line owner by address |
The American Community Survey 2019 to 2023 five year estimates put New Waverly’s median housing year at 1982; 17 percent of homes were built before 1960, 57 percent from 1960 to 1999, and 26 percent in 2000 or later. Those figures describe housing, not the age of buried lines. A replacement bore along Front Street may follow an older service route, while newer development can call for a new service. Before drilling near marked lines, we use hydrovac potholing to expose them; on streets with homes from several eras, paint alone cannot show a line’s depth.

Where is New Waverly near Willis, Texas?
New Waverly is an incorporated city in Walker County, at an elevation of 359 feet and covering 2.21 square miles. We plan underground work in New Waverly, where ZIP code 77358 serves the city. Willis lies 7.3 miles south, Panorama Village is 10.9 miles south, and Huntsville is 11.9 miles north; Huntsville is the county seat. Conroe is 14.6 miles south, and Cut and Shoot is 16.3 miles southeast. New Waverly is 403 road miles and a 7.7 hour drive from our Yukon, Oklahoma yard. That distance is part of planning mobilization for a bore near Interstate 45.
Places near New Waverly
- Directional boring in Willis: 7.3 miles south
- Directional boring in Panorama Village: 10.9 miles south
- Directional boring in Huntsville: 11.9 miles north
- Directional boring in Conroe: 14.6 miles south
- Directional boring in Cut and Shoot: 16.3 miles southeast
Which jobs call for a bore in New Waverly near Front Street?
- Highway crossing: A bore beneath Interstate 45 keeps the route below existing pavement, with the utility owner handling the TxDOT permit.
- Street service: A water or sewer bore along Front Street can pass beneath the road surface instead of opening a trench through it.
- Fiber conduit: A conduit route near Old Houston Road needs marked utilities exposed before drilling through the mapped clay.
- Creek crossing: A bore under Chicken Creek needs a planned depth and a jurisdiction check during project planning.
- Rail crossing: A route beneath Union Pacific track needs a railroad agreement that sets the crossing conditions.
- Electric conduit: Near Gibbs Street, we confirm the line owner before planning a conduit bore for the address.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
How do I get a quote for a New Waverly bore near Campbell Road?
For a Campbell Road quote, send the address or map pin, what is going in the ground, the pipe or conduit size, and the footage; a sketch or plans help. The route near Campbell Road matters because New Waverly has mapped clay, streets and crossings that can change the drilling plan. Include any known pavement, creek or utility crossing so we can scope the work from the start.
In New Waverly, the mapped heavy clay is the first cost factor because sticky cuttings can build on the reamer and slow the pull. The number of utilities to expose, pipe or conduit size, and bore length also shape the work. Interstate 45 pavement, Union Pacific tracks, and Chicken Creek can add crossing and planning needs. Pit excavation, concrete, sand backfill and equipment time matter too. Mobilization for the 403 road miles from Yukon is part of the job scope, as are high profile or emergency conditions.
Questions people ask about boring in New Waverly
Does Trinity Boring Solutions take directional boring jobs in New Waverly, Walker County, and how are crews assigned?
Yes, we take directional boring work in New Waverly, Walker County. Our main office is in Yukon, and work is handled by our own crews or from satellite yards run by partner drilling contractors we have vetted. You work with Trinity from the first call through the bore log, including on a route near Interstate 45.
Who controls Old Houston Road in New Waverly, and can a utility bore avoid cutting it?
We treat New Waverly street crossings as city streets because New Waverly is incorporated. A bore along Old Houston Road can pass under the road instead of cutting its pavement, subject to the route and utility locations. We expose marked utilities near the bore path before drilling close to them.
How old are homes and buried lines near Front Street in New Waverly, and what does that mean for a replacement bore?
The American Community Survey 2019 to 2023 estimates put New Waverly’s median housing year at 1982, but that does not establish the age of buried lines near Front Street. A replacement bore needs the actual line route checked. We pothole marked utilities before drilling near them so their position and depth can be verified.
Are groundwater or flood prone soils a problem for bore pits near Chicken Creek in New Waverly?
They can affect pit planning near Chicken Creek. The USDA soil survey maps a seasonal water table within 60 inches across 53 percent of New Waverly, and flood prone soils across 6 percent. We plan pit placement and pumping for wet ground, and a creek crossing needs depth planning and a jurisdiction check.
Does Annona soil in New Waverly corrode steel, and what pipe should a bore use?
The USDA soil survey maps high steel corrosion risk across New Waverly, including areas with Annona soil. That can matter for steel casing and tracer wire, so the line owner should select any needed coating. For New Waverly boring work, we account for soil corrosion by noting it does not affect HDPE. The right pipe depends on the line and the owner’s specifications.
What ground does a bore pass through in New Waverly, including Annona soil at 40 inches?
New Waverly has mapped Annona fine sandy loam across 46 percent of its area, while clay is the mapped texture at about 40 inches across 93 percent. At that depth in New Waverly, we account for average clay content of 55 percent when planning underground work. These USDA soil survey patterns are not test borings, so route conditions should be checked before selecting the drilling approach.
How much Texas811 notice is needed for a New Waverly bore near Gibbs Street, and what if marks move?
For a bore near Gibbs Street, submit the Texas811 locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before work. For New Waverly work, if our start slips more than 14 days past the original notice, we make a new request. Have worn or moved marks refreshed through Texas811 before continuing.
How far is New Waverly from Trinity’s Yukon office, and does Willis affect the job plan?
New Waverly is 403 road miles and a 7.7 hour drive from our Yukon, Oklahoma yard; Willis is 7.3 miles south of the city. The job’s location and scope help determine mobilization planning. Send the route near Willis or New Waverly so we can consider access and local crossings such as Interstate 45.
What affects the cost of a directional bore in New Waverly near Interstate 45?
The price depends on the job details, starting with New Waverly’s heavy clay because it can cling to tooling and affect reaming. Bore length, pipe size, utilities to expose, pavement, creek crossings and pit work also matter. A route beneath Interstate 45 or Union Pacific track needs crossing planning, and the 403 road miles from Yukon affect mobilization.
Where the New Waverly facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside New Waverly
- U.S. Census Bureau, TIGER/Line 2024: New Waverly boundary, roads, rail lines and streams
- U.S. Census Bureau, Vintage 2024 population estimates: New Waverly
- U.S. Census Bureau, American Community Survey 2019 to 2023: New Waverly housing units and year built
- Macrostrat geologic map compilation: map units under New Waverly
- U.S. EPA Safe Drinking Water Information System: public water systems serving New Waverly
- U.S. Department of Transportation, North American Rail Network: track owners in Walker County
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Walker County
- U.S. Geological Survey, Elevation Point Query Service: New Waverly elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to New Waverly
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in New Waverly
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in New Waverly, Texas
Type the address of your job in New Waverly. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for New Waverly
Same county: Riverside. All counties: Texas county list.
