Huntsville Texas Directional Boring: Depcor Soil, Prairie Branch and Union Pacific
Quick Answer: Huntsville is an incorporated county seat in Walker County, so its city streets belong to the city. We handle directional boring, also called horizontal directional drilling (HDD), for routes near Prairie Branch and Interstate 45 in Huntsville, Texas. Huntsville is 391 road miles from our Yukon, Oklahoma main office, and Sam Houston Avenue is one local route to plan around. Depcor soil and sandy clay loam can make the bore sticky, so drilling fluid and reaming need to suit the ground.
Huntsville bores at a glance
- County seat of Walker County, Texas. Population 49,500 (Census Bureau 2024 estimate).
- Road distance from our Yukon, Oklahoma main office: 391 miles, about 7.5 hours of driving.
- Ground: Depcor soil is mapped on 43 percent of the area, with sandy clay loam about 40 inches down.
- Rock: bedrock is mapped within 60 inches on 17 percent of the area.
- Highways inside the boundary: Interstate 45, US 190, Texas State Highway 19, Texas State Highway 75 and Texas State Highway 30. State permit office: TxDOT Bryan District.
- Railroad track inside the boundary: Union Pacific, with 3 mapped street and rail crossings.
- Named streams inside the boundary: Prairie Branch, Town Branch, Parker Creek and Alligator Branch.
- Public water: City of Huntsville, surface water bought from another system.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Who does directional boring along Interstate 45 in Huntsville?
Huntsville is an incorporated city, so its city streets belong to the city itself. It is the Walker County seat, with a population of 49,500 in the Census Bureau Vintage 2024 estimate. We install water, sewer, gas, electric conduit and fiber lines; in Huntsville, a route might run beneath Sam Houston Avenue or toward a service near Interstate 45.
Our main office is in Yukon, Oklahoma, and Huntsville work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our longest bore is roughly 4,100 feet of 48 inch pipe beneath the Arkansas River in Tulsa, showing the reach behind work such as a shorter service crossing near Huntsville’s Prairie Branch. For Huntsville, we are a family business started in 1965 and have done directional boring since 1982.

What kind of ground does Depcor soil mean for a Huntsville bore?
Depcor is the leading USDA soil series mapped in Huntsville, covering 43 percent of the city. The USDA soil survey also maps Depcor Huntsburg association, gently undulating, under 25 percent of the area and Depcor Huntsburg Gunter association, gently rolling, under 16 percent. At about 40 inches below the surface, sandy clay loam is mapped under 43 percent, while clay is mapped under 31 percent. When considering Huntsville work, we treat these as mapped patterns, not test borings, and do not use them as site tests. The clay can cling to a reamer and grip pipe, so the bore plan needs to account for the ground along the route.
| USDA soil survey, inside the Huntsville city limits | What is mapped |
|---|---|
| Soil series mapped | Depcor 43 percent, Annona 18 percent, Gunter 7 percent, Ferris 7 percent and Falba 6 percent |
| Texture at the surface | loamy fine sand 47 percent, fine sandy loam 28 percent and clay 13 percent |
| Texture about 40 inches down | sandy clay loam 43 percent, clay 31 percent and bedrock 8 percent |
| Engineering class about 40 inches down | lean clay (CL) 48 percent, fat clay (CH) 31 percent and silty sand (SM) 9 percent |
| Average clay content about 40 inches down | 34 percent |
| Bedrock mapped within 60 inches | 17 percent of the area (0 percent hard rock, 17 percent weathered rock) |
| Seasonal water table within 60 inches | 73 percent of the area |
| Flood prone soils | 6 percent of the area |
| High corrosion risk for uncoated steel | 89 percent of the area |
The USDA soil survey maps bedrock within 60 inches under 17 percent of Huntsville and within 40 inches under 8 percent; the mapped bedrock is weathered, not hard. The Willis Formation, a Cenozoic unit of alluvium and gravel, is also mapped here, so local conditions can vary along a bore. A seasonal water table is mapped within 60 inches under 73 percent of the area, while flood prone soils cover 6 percent. High steel corrosion risk is mapped under 89 percent, so the line owner should consider casing and tracer wire materials; HDPE is not subject to that soil corrosion concern.
How is a bore run through Huntsville sandy clay loam?
Huntsville’s mapped sandy clay loam and clay call for fluid and reaming choices that control sticky cuttings and keep the hole stable. We adapt the drilling sequence to the route and soil.
- In Huntsville’s clay rich Depcor ground, we select fluid and polymer for the cuttings, then ream in stages to limit sticky buildup around the tool.
- Where sandy clay loam is mapped at about 40 inches, we monitor the hole as it opens and have the pipe ready before the final reaming pass.
- With a seasonal water table mapped within 60 inches under 73 percent of Huntsville, we keep pits manageable and pump out water when needed.
- Near marked utilities on Sam Houston Avenue, we hydrovac pothole each line on the bore path, then track the drill head and log depth and pitch.

What does a bore have to cross near Prairie Branch in Huntsville?
Huntsville’s route choices include Interstate 45, US 190 and Texas State Highway 19, as well as Texas State Highway 75 and Texas State Highway 30. A bore under an existing highway uses boring or tunneling beneath the pavement, rather than cutting across it. Sam Houston Avenue is the longest named street in the city at 7.42 miles, followed by Veterans Memorial Parkway at 5.96 miles and State Park Road 40 at 5.44 miles. Avenue Q also runs through Huntsville, so the precise crossing point matters when laying out pits and the bore path.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| Interstate 45 | Interstate | 28.3 roadway miles inside | State highway office |
| US 190 | US highway | 15.3 roadway miles inside | State highway office |
| Texas State Highway 19 | State highway | 11.9 roadway miles inside | State highway office |
| Texas State Highway 75 | State highway | 16.5 roadway miles inside | State highway office |
| Texas State Highway 30 | State highway | 9.4 roadway miles inside | State highway office |
| FM 2821 | State highway | 6 roadway miles inside | State highway office |
| FM 247 | State highway | 4.2 roadway miles inside | State highway office |
| FM 1791 | State highway | 3.5 roadway miles inside | State highway office |
| FM 1374 | State highway | 1.8 roadway miles inside | State highway office |
| FM 980 | State highway | 1.1 roadway miles inside | State highway office |
| FM 3411 | State highway | 0.4 roadway miles inside | State highway office |
| Union Pacific | Railroad | 1.81 track miles inside | The railroad |
| Prairie Branch | Stream | 6.03 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Town Branch | Stream | 3.82 channel miles inside | Checked for Corps of Engineers jurisdiction |
Union Pacific has 1.81 track miles in Huntsville, and public mapping shows 3 street and rail crossings in the city. Prairie Branch runs for 6.03 channel miles here, among 62 mapped street crossings of named streams. Town Branch and Parker Creek also cross the city, while Lake Raven and Elkins Lake are mapped within city limits. Those features can affect the route, pit placement and the checks needed during crossing planning.
Who approves a Huntsville bore near Union Pacific track?
Interstate 45 is a state highway, so work in its right of way needs a TxDOT utility permit reviewed by the TxDOT Bryan District. The utility that owns the line files in TxDOT’s online RULIS system; we prepare the bore plan and profile for that application and work under the utility owner’s permit. TxDOT rules call for boring or tunneling below existing highway pavement, and highway crossings need the required cover and casing. A Union Pacific crossing needs an agreement from the railroad, which sets crossing conditions such as casing, depth and flagging. A Prairie Branch crossing is checked during planning for U.S. Army Corps of Engineers jurisdiction. Huntsville’s incorporated city streets belong to the city.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Which utilities are near Huntsville lines in Walker County?
The City of Huntsville public water system uses purchased surface water and reports 23,550 service connections serving 48,522 people. For a bore near that system, we hydrovac pothole marked lines on the route before drilling close to them. Entergy Texas, Houston County Electric Cooperative, Mid-South Electric Cooperative Association and Sam Houston Electric Cooperative report electric service in Walker County. We confirm the electric line owner for the specific route before planning a conduit bore, including along streets such as Sam Houston Avenue.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| City of Huntsville | Public water system | Surface water bought from another system | 23,550 connections, 48,522 people served |
| Entergy Texas, Houston County Electric Cooperative, Mid-South Electric Cooperative Association and Sam Houston Electric Cooperative | Electric utilities reporting service in Walker County | EIA Form 861 | Confirm the line owner by address |
Huntsville’s American Community Survey 2019 to 2023 five year estimates put its median housing year at 1986, which we keep separate from boring conditions. The survey estimates 6 percent of housing was built before 1960, 67 percent from 1960 to 1999 and 27 percent in 2000 or later. A route near Avenue Q may serve a replacement line or a newer service, and the plans and exposed utilities help distinguish the two. Paint shows a marked line’s position, not its depth, so we pothole each marked utility on the bore path before the drill approaches it.

How far is Huntsville from Conroe and the Yukon yard?
Huntsville is in Walker County, covers 41.78 square miles and sits at an elevation of 439 feet. For Huntsville ZIP codes 77340 and 77320, we plan boring around the actual crossing, not the postal boundary. New Waverly is 11.9 miles south, Riverside is 13.8 miles northeast and Oakhurst is 14.7 miles east. Huntsville is the county seat, and Conroe, the nearest larger city, is 26.0 miles south. The drive from our Yukon, Oklahoma yard is 391 road miles and 7.5 hours, which affects mobilization for a bore near Sam Houston State University or another Huntsville route.
Places near Huntsville
- Directional boring in New Waverly: 11.9 miles south
- Directional boring in Riverside: 13.8 miles northeast
- Directional boring in Oakhurst: 14.7 miles east
- Directional boring in Willis: 18.9 miles south
- Directional boring in Trinity: 20 miles northeast
- Directional boring in Conroe: 26 miles south
What kinds of bores come up near Sam Houston Avenue in Huntsville?
- Highway crossing: A route beneath Interstate 45 uses a bore or tunnel under pavement, with the utility owner arranging the TxDOT permit.
- Water service: A service near the City of Huntsville water system can be routed beneath Sam Houston Avenue without cutting the street surface.
- Fiber conduit: A fiber route along Veterans Memorial Parkway needs marked utilities exposed before the drill approaches the planned alignment.
- Creek crossing: A bore near Prairie Branch can leave the channel bank uncut, with jurisdiction checked during planning.
- Rail crossing: A utility route beneath Union Pacific track needs the railroad’s crossing agreement and its specified conditions.
- Park service: A route near Huntsville State Park can be assessed for a water, sewer or conduit line with pits placed off the crossing.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What drives the price of a Huntsville bore near Avenue Q?
A map pin near Avenue Q or Prairie Branch shows the exact place a bore must start and finish, which matters when streets, drainage or other crossings shape the route. Send the address or pin, what is going underground, the pipe or conduit size and footage. A sketch or plans help us review the proposed alignment before preparing a quote.
Ground conditions, crossings and logistics all shape the scope. Depcor clay can affect reaming and fluid use, while a route beneath Interstate 45 or across Prairie Branch adds crossing work to plan. The number of utilities to expose, pavement or concrete, pit work and backfill also matter. Huntsville is 391 road miles from Yukon, so mobilization is part of the logistics review; an emergency or high profile job can call for additional planning.
Questions people ask about boring in Huntsville
Who provides electric service for a bore in Huntsville and Walker County?
Several utilities report electric service in Walker County: Entergy Texas, Houston County Electric Cooperative, Mid-South Electric Cooperative Association and Sam Houston Electric Cooperative. That list does not identify the provider at every Huntsville address. We confirm the line owner before planning an electric conduit route near a street such as Avenue Q.
How do I get utilities marked before a Huntsville bore by Veterans Memorial Parkway?
Submit a locate request through Texas811 at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays. The request cannot be made earlier than 14 days before the planned start. For a bore by Veterans Memorial Parkway, make a new request if the start slips more than 14 days past the original notice, and have worn or moved marks refreshed through Texas811 before work continues.
Can a Huntsville bore cross Prairie Branch without cutting the channel?
A directional bore can pass beneath Prairie Branch without opening a trench through the channel. The stream has 6.03 channel miles mapped in Huntsville, and crossing planning checks whether the U.S. Army Corps of Engineers has jurisdiction. The exact route and conditions determine the bore plan and pit locations.
Does Depcor soil in Huntsville corrode steel casing?
The USDA soil survey maps high steel corrosion risk under 89 percent of Huntsville, so the line owner should consider casing and tracer wire materials. In Huntsville, we consider HDPE because it is not affected by soil corrosion during underground work. Near Depcor soil, the line owner selects any coating for steel casing or tracer wire based on the line design.
What ground does a Huntsville bore encounter in Depcor soil?
Depcor is mapped under 43 percent of Huntsville, and sandy clay loam is the leading texture at about 40 inches below the surface, mapped under 43 percent. Clay is mapped under 31 percent at that depth. The clay can stick to the reamer, so staged reaming and fluid suited to the ground help manage the open hole.
Is there rock close to the surface along a Huntsville bore?
The USDA soil survey maps bedrock within five feet under 17 percent of Huntsville, with weathered bedrock mapped and hard bedrock not mapped within that depth. Within 40 inches, bedrock is mapped under 8 percent. A bore near Prairie Branch still needs route specific review because mapped soil patterns do not show conditions at every point.
Does Trinity take bore work near New Waverly or outside Huntsville?
We take work across Texas, including requests near New Waverly, 11.9 miles south of Huntsville, and rural sites outside the city limits. Trinity coordinates the work from the first call through the bore log, regardless of which crew is on site. The proposed route and scope determine what equipment and planning it needs.
How much notice does a Huntsville bore near Sam Houston Avenue need?
Texas811 needs the locate request at least 48 hours before excavation, not counting Saturdays, Sundays and legal holidays, and no earlier than 14 days before the planned start. If a Sam Houston Avenue bore starts more than 14 days after the original notice, submit a new request. Marks that wear off or move must be refreshed through Texas811 before work resumes.
What affects the cost of a directional bore in Huntsville near Interstate 45?
The route and job details determine the price, including bore length, pipe size, soil, crossings, pavement, pits and mobilization. Depcor clay can affect drilling choices, and an Interstate 45 crossing can add permit and installation planning. Prairie Branch, marked utilities and Huntsville’s 391 road miles from Yukon also affect the work scope.
Where the Huntsville facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Huntsville
- U.S. Census Bureau, TIGER/Line 2024: Huntsville boundary, roads, rail lines and streams
- U.S. Census Bureau, Vintage 2024 population estimates: Huntsville
- U.S. Census Bureau, American Community Survey 2019 to 2023: Huntsville housing units and year built
- Macrostrat geologic map compilation: map units under Huntsville
- U.S. EPA Safe Drinking Water Information System: public water systems serving Huntsville
- U.S. Department of Transportation, North American Rail Network: track owners in Walker County
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Walker County
- U.S. Geological Survey, Elevation Point Query Service: Huntsville elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Huntsville
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Huntsville
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Huntsville, Texas
Type the address of your job in Huntsville. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Huntsville
All counties: Texas county list.
