Sam Rayburn Texas Directional Boring: Kisatchie Soil, FM 1007 and Tiger Creek
Quick Answer: Along FM 1007 and roads near Sam Rayburn Reservoir, Trinity Boring Solutions handles directional boring, also called horizontal directional drilling (HDD), for utility crossings in Sam Rayburn, Texas. Sam Rayburn is 458 road miles from our Yukon, Oklahoma main office, so we plan mobilization around roads such as Wingate Boulevard and the crew assigned. Kisatchie soil and bedrock mapped near the surface can slow a bore and call for staged reaming. Tiger Creek also shapes route planning for a crossing.
Sam Rayburn bores at a glance
- Unincorporated community in Jasper County, Texas. Population 1,273 (2020 Census count).
- Road distance from our Yukon, Oklahoma main office: 458 miles, about 9.1 hours of driving.
- Ground: Kisatchie soil is mapped on 30 percent of the area, with bedrock about 40 inches down.
- Rock: bedrock is mapped within 60 inches on 58 percent of the area.
- Highways inside the boundary: FM 1007, FM 225 and FM 254. State permit office: TxDOT Beaumont District.
- Railroad track inside the boundary: none mapped.
- Named streams inside the boundary: Tiger Creek, Squirrel Creek, Little Tiger Creek and Alligator Creek.
- Electric: City of Sam Rayburn municipal electric system.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Which contractor handles directional boring near FM 1007 in Sam Rayburn?
From our Yukon, Oklahoma main office, Sam Rayburn is 458 road miles away; our own crews and vetted partner drilling crews staff work along FM 1007 and nearby roads. The Census Bureau counted 1,273 people in 2020; it does not publish yearly estimates for this unincorporated place. We install water, sewer, gas, electric conduit and fiber, routed beneath streets such as Wingate Boulevard where the plan calls for a crossing.
Our main office is in Yukon, Oklahoma, and Sam Rayburn work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our longest bore is roughly 4,100 feet of 48 inch pipe beneath the Arkansas River in Tulsa. Against that reach, a typical Sam Rayburn job may be a shorter utility crossing under FM 1007 or near a creek.

How does Kisatchie soil affect drilling in Sam Rayburn?
The USDA soil survey maps Kisatchie soil across 30 percent of Sam Rayburn, with the Kisatchie Rayburn association, hilly, also mapped across 30 percent. Fine sandy loam is the leading surface texture at 51 percent. At about 40 inches below the surface, bedrock is mapped under 46 percent of the area, clay under 17 percent, and sandy clay loam under 10 percent. The mapped clay share makes some ground sticky around a reamer, while loamy sand at that depth can loosen behind the bit. These are mapped patterns, not test borings.
| USDA soil survey, inside the Sam Rayburn mapped community boundary | What is mapped |
|---|---|
| Soil series mapped | Kisatchie 30 percent, Letney 10 percent, Rayburn 10 percent, Browndell 8 percent and Corrigan 8 percent |
| Texture at the surface | fine sandy loam 51 percent, loamy sand 15 percent and loam 8 percent |
| Texture about 40 inches down | bedrock 46 percent, clay 17 percent and sandy clay loam 10 percent |
| Engineering class about 40 inches down | fat clay (CH) 17 percent, clayey sand (SC) 10 percent and silty sand (SM) 5 percent |
| Average clay content about 40 inches down | 38 percent |
| Bedrock mapped within 60 inches | 58 percent of the area (0 percent hard rock, 58 percent weathered rock) |
| Seasonal water table within 60 inches | 21 percent of the area |
| Flood prone soils | 2 percent of the area |
| High corrosion risk for uncoated steel | 66 percent of the area |
Weathered bedrock is mapped within 60 inches across 58 percent of Sam Rayburn, with a typical depth of 34 inches; no hard bedrock is mapped within that depth. That can slow drilling, and the soil to rock contact can affect steering. Seasonal water tables occur within 60 inches across 21 percent, while flood prone soils cover 2 percent, so Tiger Creek routes need attention to pit water and channel depth. High steel corrosion risk covers 66 percent. The Catahoula Formation, a Cenozoic unit of mudstone, sand and conglomerate, adds ground variation along a bore.
What does it take to bore Sam Rayburn bedrock?
In Sam Rayburn, the USDA survey maps both shallow weathered bedrock and clay at about 40 inches. We set the bore path and drilling pace for the ground on the route, including the streets and creek crossings.
- Where Kisatchie soil holds around a reamer, we use a thinner drilling fluid and staged reaming, then plan the pipe pull for the same day the hole opens.
- Loamy sand is mapped at about 40 inches in Sam Rayburn, so we control fluid and ream in stages to help keep the bore from closing behind the bit.
- Weathered bedrock is mapped within 60 inches across 58 percent of the area; we slow down for that harder ground and check the drill head as soil changes to rock.
- Seasonal water tables are mapped within 60 inches in parts of Sam Rayburn, so we keep pits small and pump as needed near routes that approach Tiger Creek.

What is in the way of a new line near Wingate Boulevard in Sam Rayburn?
FM 1007 has 3.4 mapped roadway miles inside the Sam Rayburn community boundary; FM 225 has 1.1 and FM 254 has 0.4. US 96 runs 0.5 miles outside the boundary. A bore near these roads needs a route that accounts for highway pavement and right of way. Wingate Boulevard is the longest named street at 4.35 miles, followed by Recreational Road 255 at 3.63 miles and Sam Rayburn Parkway at 2.95 miles. For example, on a planned route beneath Wingate Boulevard, we hydrovac pothole every marked utility on the bore path before drilling near it.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| FM 1007 | State highway | 3.4 roadway miles inside | State highway office |
| FM 225 | State highway | 1.1 roadway miles inside | State highway office |
| FM 254 | State highway | 0.4 roadway miles inside | State highway office |
| US 96 | Highway nearby | 0.5 miles outside | State highway office |
| Tiger Creek | Stream | 3.01 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Squirrel Creek | Stream | 2.63 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Little Tiger Creek | Stream | 1.96 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Alligator Creek | Stream | 1.41 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Bushy Creek | Stream | 1.15 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Beef Creek | Stream | 0.98 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Little Creek | Stream nearby | 0.9 miles outside | Checked for Corps of Engineers jurisdiction |
| Sam Rayburn Reservoir | Lake or pond | 11,443 acres, inside | Checked for Corps of Engineers jurisdiction |
No railroad tracks are mapped inside Sam Rayburn or within one mile outside the community boundary, and no street to rail crossing is mapped. Tiger Creek runs 3.01 channel miles inside the community; Squirrel Creek runs 2.63 and Little Tiger Creek 1.96. Public records map 15 street crossings of named streams, so creek locations can shape a bore route. Sam Rayburn Reservoir is also mapped inside the boundary, and water crossings are checked for federal jurisdiction during planning.
Whose permission does a Sam Rayburn bore in Jasper County need?
Sam Rayburn is an unincorporated community with no city government, so public streets and permits belong to Jasper County or the state, depending on the road. FM 1007, FM 225 and FM 254 are state highways; work in their right of way needs a TxDOT utility permit reviewed by the Beaumont District. The utility that owns the line files through TxDOT’s RULIS system, while we prepare the bore plan and profile for that application. A Tiger Creek crossing is checked for U.S. Army Corps of Engineers jurisdiction during planning. No railroad tracks are mapped here.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Which utilities have lines in Sam Rayburn and Jasper County?
The water provider for the specific address has to be confirmed with the city, the county or the local water district before a bore is planned in Sam Rayburn. The public record identifies a City of Sam Rayburn municipal electric system, so the city owns the electric system. Entergy Texas, Deep East Texas Electric Cooperative, Jasper Newton Electric Cooperative and Sam Houston Electric Cooperative report electric service in Jasper County; we confirm the line owner before planning an electric conduit bore.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| City of Sam Rayburn municipal electric system | City owned electric system | Reports to the U.S. Energy Information Administration | None customers reported |
| Entergy Texas, Deep East Texas Electric Cooperative, Jasper-Newton Electric Cooperative and Sam Houston Electric Cooperative | Electric utilities reporting service in Jasper County | EIA Form 861 | Confirm the line owner by address |
The American Community Survey 2019 to 2023 five year estimates put Sam Rayburn’s median housing year at 1988; 4 percent of homes were built before 1960, 63 percent from 1960 to 1999 and 33 percent in 2000 or later. That mix can mean replacement work as well as new service connections. Before drilling near a marked line along FM 1007 or a neighborhood street, we expose it by hydrovac so its depth is known.

Where is Sam Rayburn in relation to Jasper and nearby places?
Sam Rayburn is an 8.37 square mile census designated place in Jasper County, Texas, at an elevation of 238 feet. Its ZIP code is 75931. Browndell is 4.3 miles northeast, Jasper is 10.9 miles south, Pineland is 12.1 miles north, Hemphill is 21.1 miles northeast and Broaddus is 21.4 miles northwest. Jasper is both the county seat and the nearest larger city. From our Yukon yard, the drive to Sam Rayburn is 458 road miles and 9.1 hours, which affects how we plan mobilization for a job near FM 1007.
Places near Sam Rayburn
- Directional boring in Browndell: 4.3 miles northeast
- Directional boring in Jasper: 10.9 miles south
- Directional boring in Pineland: 12.1 miles north
- Directional boring in Hemphill: 21.1 miles northeast
- Directional boring in Broaddus: 21.4 miles northwest
What would we bore near Recreational Road 255 in Sam Rayburn?
- Highway crossing: A bore beneath FM 1007 keeps the utility route under the highway instead of cutting its pavement.
- Street service: A water or sewer line beneath Wingate Boulevard can cross the street without an open cut through the roadway.
- Fiber route: A conduit bore along Recreational Road 255 can carry fiber while avoiding surface cuts along the planned path.
- Creek crossing: A line near Tiger Creek needs a route planned below the channel and a check for federal jurisdiction.
- Reservoir approach: A utility route near Sam Rayburn Reservoir needs its alignment planned around the mapped water feature.
- Electric conduit: Before a conduit bore near Sam Rayburn Parkway, we confirm the line owner and expose marked utilities along the path.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What should I send for a Sam Rayburn quote near Tiger Creek?
A map pin matters near Tiger Creek because the exact approach can change the creek crossing plan. Send the address or pin, what is going in the ground, the pipe or conduit size and the footage. A sketch or plans help us place the route against nearby streets such as Wingate Boulevard and identify the crossing details.
The mapped ground is a first pricing factor: Kisatchie soil, clay and shallow weathered bedrock can change drilling time and reaming. Length and pipe or conduit size also matter. We look at how many lines need exposure, pavement near FM 1007, and any creek crossing such as Tiger Creek. Pit size, excavator time and sand backfill affect the scope too. Mobilization reflects the 458 road miles from Yukon, and high profile or emergency work can add planning needs.
Questions people ask about boring in Sam Rayburn
Does Trinity Boring Solutions take jobs in Sam Rayburn and Jasper County?
Yes. We take directional boring work in Sam Rayburn, and our own crews and vetted partner drilling contractors staff the work. The job stays with Trinity from the first call through the bore log, including work planned along FM 1007 or another Jasper County route.
Could groundwater or flooding near Tiger Creek affect a Sam Rayburn bore pit?
It can affect pit planning. The USDA survey maps seasonal water tables within 60 inches across 21 percent of Sam Rayburn, and flood prone soils across 2 percent. Near Tiger Creek, we plan pit placement for possible water and keep the crossing route below the channel where the design requires it.
Does Kisatchie soil in Sam Rayburn pose a corrosion concern for steel pipe?
The soil survey maps high steel corrosion risk across 66 percent of Sam Rayburn. The line owner chooses any coating for steel casing or tracer wire. HDPE is not affected by soil corrosion, so the material decision depends on the line design and the conditions near the Kisatchie mapped ground.
What ground should I expect around Kisatchie soil in Sam Rayburn?
The USDA soil survey maps Kisatchie soil across 30 percent of Sam Rayburn. Fine sandy loam is the main surface texture, while about 40 inches down the survey maps bedrock under 46 percent and clay under 17 percent. Those area patterns help plan the bore, but they are not test borings.
Is there rock near the surface for a Sam Rayburn bore?
The soil survey maps bedrock within five feet across 58 percent of Sam Rayburn, typically at 34 inches. The mapped bedrock is weathered, and hard bedrock is not mapped within 60 inches. A specific route can still differ, so the bore plan accounts for ground changes as drilling advances.
Who approves work under FM 1007 in Sam Rayburn?
TxDOT reviews utility work in the FM 1007 right of way through its Beaumont District. The utility owner submits the permit application in TxDOT’s RULIS system, and we prepare the bore plan and profile for that filing. A bore beneath existing highway pavement uses boring or tunneling.
How far is Sam Rayburn from Yukon, and does Jasper change the job plan?
Sam Rayburn is 458 road miles and a 9.1 hour drive from our Yukon main office. Jasper is 10.9 miles south and is the county seat. The distance affects mobilization planning for a bore near Jasper or along FM 225, but the route and ground still determine the work plan.
How much notice does Texas811 need for a Sam Rayburn bore near Wingate Boulevard?
Request a Texas811 locate at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before work. If the start slips more than 14 days after the original notice, make a new request. Have worn or moved marks refreshed through Texas811 before work continues near Wingate Boulevard.
What affects the price of a Sam Rayburn bore near FM 1007?
The route, length and pipe or conduit size matter, along with the mapped clay and weathered bedrock that can change drilling time. We also consider utility exposures, pavement near FM 1007, creek crossings such as Tiger Creek, pit and excavator needs, and mobilization from Yukon. The details of the specific job set the scope.
Where the Sam Rayburn facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Sam Rayburn
- U.S. Census Bureau, TIGER/Line 2024: Sam Rayburn boundary, roads, rail lines and streams
- U.S. Census Bureau, 2020 Census: Sam Rayburn population count
- U.S. Census Bureau, American Community Survey 2019 to 2023: Sam Rayburn housing units and year built
- Macrostrat geologic map compilation: map units under Sam Rayburn
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Jasper County
- U.S. Geological Survey, Elevation Point Query Service: Sam Rayburn elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Sam Rayburn
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Sam Rayburn
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Sam Rayburn, Texas
Type the address of your job in Sam Rayburn. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Sam Rayburn
Same county: Buna · Kirbyville · Evadale. All counties: Texas county list.
