trinityboringsolutions.com

Montgomery Texas Directional Boring: Latium Clay, Town Creek and BNSF Railway

Quick Answer: The USDA soil survey maps heavy clay in Montgomery, while the geologic map identifies Miocene Fleming Formation; bedrock is not mapped in the top five feet. Trinity Boring Solutions does directional boring, also called horizontal directional drilling (HDD), in Texas, including crossings of Texas State Highway 105. Montgomery is 429 road miles from our Yukon, Oklahoma main office, with Lone Star Parkway among the streets a route may follow. The mapped heavy clay can grip a pipe, so the bore needs controlled fluid and staged reaming.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Montgomery bores at a glance

  • Incorporated city in Montgomery County, Texas. Population 2,860 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 429 miles, about 8.3 hours of driving.
  • Ground: Latium soil is mapped on 33 percent of the area, with clay about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 1 percent of the area.
  • Highways inside the boundary: Texas State Highway 105, FM 1097, FM 149 and FM 2854. State permit office: TxDOT Houston District.
  • Railroad track inside the boundary: BNSF Railway, with 1 mapped street and rail crossings.
  • Named streams inside the boundary: Town Creek, Stewart Creek, Atkins Creek and Carwile Creek.
  • Public water: City of Montgomery, groundwater wells.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Which contractor handles directional boring in Montgomery near Texas State Highway 105?

Trinity Boring Solutions handles directional boring in Montgomery, where the top five feet are mapped mostly as heavy clay above the Miocene Fleming Formation. Montgomery County’s population is 2,860, according to the Census Bureau Vintage 2024 estimate. We install water, sewer, gas, electric conduit and fiber along routes such as Texas State Highway 105 and FM 1097, with the bore plan shaped around the specific line and crossing.

Our main office is in Yukon, Oklahoma, and Montgomery work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our range runs from 3/4 inch service lines to 48 inch casing, a span that can fit work from an FM 1097 service connection to a larger crossing. We are a family business started in 1965, with directional boring since 1982; that experience informs jobs along Montgomery’s roads, whatever their scale.

Directional drill rig and crew working on a street beside a brick commercial building
Our drill and crew set up on a street beside a brick commercial building. Photos on this page are from our jobs in Oklahoma and Texas.

What is Montgomery Latium soil like to bore?

Montgomery’s USDA soil survey maps Latium as the most common soil series, covering 33 percent of the city, and identifies Latium clay on 23 percent of the mapped area. At about 40 inches below the surface, 94 percent of the mapped area has clay texture; at the surface, clay covers 44 percent. These are survey patterns, not test borings. For a bore near Town Creek or Eva Street, the mapped clay signals sticky cuttings and a hole that can grip the pipe as it is pulled through.

USDA soil survey, inside the Montgomery city limitsWhat is mapped
Soil series mappedLatium 33 percent, Woodville 29 percent, Gowker 10 percent, Crockett 7 percent and Garner 6 percent
Texture at the surfaceclay 44 percent, fine sandy loam 23 percent and loam 14 percent
Texture about 40 inches downclay 94 percent and clay loam 5 percent
Engineering class about 40 inches downfat clay (CH) 78 percent and lean clay (CL) 20 percent
Average clay content about 40 inches down48 percent
Bedrock mapped within 60 inches1 percent of the area (0 percent hard rock, 1 percent weathered rock)
Seasonal water table within 60 inches31 percent of the area
Flood prone soils12 percent of the area
High corrosion risk for uncoated steel97 percent of the area

The USDA soil survey maps bedrock within 60 inches across 1 percent of Montgomery, so bedrock is not mapped in the top five feet; deeper rock is still possible. A seasonal water table is mapped within 60 inches across 31 percent, and flood prone soils cover 12 percent, which calls for attention to wet pits and creek depth near Town Creek. High steel corrosion risk covers 97 percent, so the line owner should weigh casing and tracer wire materials. The geologic map identifies Miocene age Fleming Formation, described as clay and sandstone, which can mean changing ground conditions along a bore.

How do crews bore Montgomery clay?

Montgomery’s mapped clay calls for a controlled bore rather than a rushed pull. Along Texas State Highway 105, we adapt drilling fluid and reaming to the ground, keep an eye on returns, and expose marked utilities before the drill approaches them.

  1. Clay management: Montgomery has heavy clay mapped across much of the area, so we use thinner fluid with polymer, ream in stages and pull pipe the day the hole opens.
  2. Pressure watch: With heavy clay mapped near Texas State Highway 105, we monitor fluid returns and keep pressure controlled so fluid does not lift pavement.
  3. Utility exposure: Along Lone Star Parkway, every marked utility on the bore path is hydrovac pothole exposed before the drill approaches; paint gives position, not depth.
  4. Wet crossing setup: Near Town Creek, mapped flood prone soils and seasonal water tables call for planned crossing depth and manageable pits; we track depth and pitch as the bore advances.
Open bore pit in red Oklahoma dirt with white PVC conduit stub ups and an orange safety barrier
An open bore pit in red Oklahoma dirt with PVC conduit stubbed up and a safety barrier around it.

What is in the way of a new line in Montgomery near Town Creek?

Montgomery has Texas State Highway 105, FM 1097, FM 149 and a short stretch of FM 2854 within its limits, so a route may need a TxDOT right of way crossing. Among named streets, Lone Star Parkway runs 2.82 miles in the city, Liberty Street 1.77 miles and Old Plantersville Road 1.73 miles. Eva Street adds another 1.39 miles. A bore alignment on any of these roads must account for pavement, driveways and marked utilities without assuming the route is clear.

CrossingTypeMapped extentWho has a say
Texas State Highway 105State highway3.4 roadway miles insideState highway office
FM 1097State highway2.5 roadway miles insideState highway office
FM 149State highway2.1 roadway miles insideState highway office
FM 2854State highway0.2 roadway miles insideState highway office
BNSF RailwayRailroad1 track miles insideThe railroad
Town CreekStream3.26 channel miles insideChecked for Corps of Engineers jurisdiction
Stewart CreekStream1.93 channel miles insideChecked for Corps of Engineers jurisdiction
Atkins CreekStream0.91 channel miles insideChecked for Corps of Engineers jurisdiction
Carwile CreekStream0.22 channel miles insideChecked for Corps of Engineers jurisdiction
Landrum CreekStream nearby0.4 miles outsideChecked for Corps of Engineers jurisdiction
West Fork San Jacinto RiverStream nearby1 miles outsideChecked for Corps of Engineers jurisdiction
Mound CreekStream nearby1 miles outsideChecked for Corps of Engineers jurisdiction
Lake ConroeLake or pond17,528 acres, nearbyChecked for Corps of Engineers jurisdiction
Randall LakeLake or pond22 acres, insideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

BNSF Railway has 1.0 track mile inside Montgomery, and public mapping shows one street and rail crossing in the city. A crossing beneath the BNSF line needs an agreement from the railroad, which sets the crossing conditions. Town Creek runs 3.26 channel miles in the city; Stewart Creek runs 1.93 miles, and mapped street crossings of named streams total seven. A creek route is checked for U.S. Army Corps of Engineers jurisdiction during planning. Randall Lake and Rampy Lake are also within city limits.

Do I need a permit to bore Montgomery roads or cross BNSF Railway?

A bore under Texas State Highway 105 sets its depth by the line type: electric and communication lines need 60 inches of cover below the lowest crossed grade, and water lines need 60 inches. TxDOT’s Houston District reviews the utility permit for state highway right of way work. The utility owner files in TxDOT’s RULIS system; we prepare the bore plan and profile for that filing and work under the owner’s permit. Montgomery city streets belong to the city itself. A BNSF Railway crossing needs the railroad’s agreement, and a Town Creek crossing is checked for Corps jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

What is already in the ground in Montgomery County?

The City of Montgomery public water system uses groundwater wells and reports 1,257 service connections serving 3,771 people. Electric utilities reporting service in Montgomery County are CenterPoint Energy, Entergy Texas, Mid-South Electric Cooperative Association, Sam Houston Electric Cooperative and San Bernard Electric Cooperative. The utility owning a particular line is confirmed before planning a conduit bore. Near the City of Montgomery water system or an electric route along FM 149, we hydrovac pothole marked utilities before drilling close to them.

Line ownerWhat it isSourceSize
City of MontgomeryPublic water systemGroundwater wells1,257 connections, 3,771 people served
CenterPoint Energy, Entergy Texas, Mid-South Electric Cooperative Association, Sam Houston Electric Cooperative and San Bernard Electric CooperativeElectric utilities reporting service in Montgomery CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Montgomery’s median housing year at 2012; 8 percent of housing was built before 1960, 14 percent from 1960 to 1999 and 78 percent in 2000 or later. That mix can mean both replacement work on older lines and new services in newer homes near Lone Star Parkway. Before a bore crosses a marked line, hydrovac potholing confirms its depth; locate paint shows position, not depth.

Exposed underground utility line in a hand dug potholing pit before a directional bore in Oklahoma
An existing utility line exposed in a pothole before a directional bore in Oklahoma.

Where is Montgomery in relation to Magnolia and Yukon?

Montgomery is in Montgomery County, 13.4 miles west of county seat Conroe, at an elevation of 309 feet. The incorporated city covers 5.76 square miles and uses ZIP codes 77356 and 77316. Plantersville is 10.6 miles west, Todd Mission is 11.9 miles southwest, and Magnolia is 12.5 miles south; Magnolia is the nearest larger city. Our Yukon, Oklahoma yard is 429 road miles away, an 8.3 hour drive, so distance is part of planning mobilization for a Montgomery bore.

Places near Montgomery

What kinds of bores come up in Montgomery near Lone Star Parkway?

  • Highway crossing: A Texas State Highway 105 bore needs a route beneath the roadway and its pavement, with cover and the TxDOT right of way permit set for the line.
  • Water service: A connection near the City of Montgomery groundwater system can use a bore to reach a property without opening the full route along Eva Street.
  • Fiber conduit: A conduit route on Lone Star Parkway can avoid a continuous open cut, with hydrovac exposure where marked utilities meet the planned alignment.
  • Creek crossing: A Town Creek bore is planned below the channel, with the crossing checked for U.S. Army Corps of Engineers jurisdiction.
  • Rail crossing: A route under the BNSF Railway track needs the railroad’s agreement, with crossing conditions set before the bore proceeds.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

How do I get a quote for directional boring near Eva Street in Montgomery?

For a Montgomery bore near Eva Street, send the address or map pin first, then what is going underground, such as water or fiber. Include the pipe or conduit size and the footage, whether the route follows Lone Star Parkway or crosses Texas State Highway 105. A sketch or plans help us see pits, pavement and nearby features before we set the scope.

For Montgomery work, mapped heavy clay comes first in the price review because it can cling to the reamer and pipe. Next we consider crossed utilities and the exposure work they require, then pavement or concrete and crossings such as BNSF Railway or Town Creek. Pipe size, bore length, pits, excavator time and sand backfill also shape the job. The 429 road miles from Yukon affect mobilization, while high profile or emergency work can add planning demands.

Questions people ask about boring in Montgomery

Does Trinity Boring Solutions take Montgomery County jobs, and how are crews assigned?

Yes, Trinity Boring Solutions takes directional boring work in Montgomery County. Our own crews and crews from satellite yards run by partner drilling contractors Trinity has personally vetted handle the work, while customers deal with Trinity from the first call through the bore log. That arrangement applies to a route near Texas State Highway 105 as well as other Montgomery work.

For a Montgomery crossing under Texas State Highway 105, who approves the bore?

TxDOT’s Houston District reviews a utility permit for work in the Texas State Highway 105 right of way. The utility that owns the line submits the application through TxDOT’s RULIS system, and we prepare the bore plan and profile for it. The permit applies to the highway route, not ordinary Montgomery city streets.

For a Montgomery crossing under BNSF Railway, what does the bore require?

A bore beneath BNSF Railway track in Montgomery needs an agreement from BNSF Railway. The railroad sets the crossing conditions, including casing, depth and flagging. Public mapping shows 1.0 track mile inside the city and one street and rail crossing, so the proposed route needs to be checked against the actual track location.

Can a new line be bored under Town Creek in Montgomery?

A line can be planned beneath Town Creek, which runs 3.26 channel miles in Montgomery. During planning, the creek crossing is checked for U.S. Army Corps of Engineers jurisdiction, and the design accounts for the channel and wet ground. The survey maps seasonal water tables within 60 inches across 31 percent of the city.

In Montgomery, who runs the public water system, and where does its water come from?

The City of Montgomery runs the public water system, and its source is groundwater wells. Public records list 1,257 service connections serving 3,771 people. A planned water bore near the city system still needs the route and marked utilities checked before drilling, including any alignment along FM 149.

Which electric providers should I check for a Montgomery County conduit bore?

CenterPoint Energy, Entergy Texas, Mid-South Electric Cooperative Association, Sam Houston Electric Cooperative and San Bernard Electric Cooperative report electric service in Montgomery County. The line owner for the specific Montgomery address is confirmed before conduit specifications are set. Near Lone Star Parkway, marked lines on the bore path are exposed before drilling close to them.

How much notice does Texas811 need for a bore along Lone Star Parkway in Montgomery?

For a bore along Lone Star Parkway, make the Texas811 locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before. For Montgomery work, if our start slips more than 14 days past the original notice, we submit a new request. Before continuing Montgomery work, we refresh marks that wear off or move through Texas811.

How far is Montgomery from Trinity’s Yukon office, and does Magnolia change the job?

Montgomery is 429 road miles and an 8.3 hour drive from Trinity’s Yukon, Oklahoma main office. Magnolia, 12.5 miles south, is the nearest larger city, but it does not change the route details for a bore in Montgomery. The distance from Yukon is considered in mobilization, alongside the work near streets such as Eva Street.

What affects the cost of directional boring under Texas State Highway 105 in Montgomery?

The price depends on the Montgomery job’s scope, not on the highway name alone. Heavy clay, pipe or conduit size, bore length, marked utilities to expose, pavement, and the Texas State Highway 105 crossing all affect planning and equipment. Pits, excavator time, creek crossings and the 429 road miles from Yukon can also affect mobilization and the work required.

Where the Montgomery facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Montgomery

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Montgomery, Texas

Type the address of your job in Montgomery. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Montgomery

Same county: Conroe · The Woodlands · Willis · Houston · Pinehurst · Shenandoah · Oak Ridge North · Roman Forest · Splendora · Patton Village · Porter Heights · Woodbranch. All counties: Texas county list.