Directional Boring Contractors in Hale County, TX
Trinity Boring Solutions is a directional boring contractor serving Hale County, Texas, installing water, sewer, gas, electric and fiber lines without an open trench in Plainview, Abernathy, Hale Center, Petersburg and Edmonson. Plainview, the county seat, is about 324 road miles southwest of the Trinity main office in Yukon, Oklahoma. The usual crossings in Hale County are Interstate 27 and US 87, Blackwater Draw and BNSF Railway track. Call (405) 409-7423 any time.
Free Bore Planner
Plan Your Bore in Hale County, Texas
Type the address of your job in Hale County. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
What Should You Know Before Boring in Hale County?
Hale County covers 1,005 square miles, has about 31,953 residents and sits in the TxDOT Lubbock District.
| County seat | Plainview |
|---|---|
| Population | 31,953 (2024 Census estimate), down 1.8% since 2020 |
| Land area | 1,005 square miles |
| Largest cities and towns | Plainview (19,429), Abernathy (2,147), Hale Center (2,000), Petersburg (971) and Edmonson (87) |
| TxDOT district | TxDOT Lubbock District |
| 811 center | Texas811 (call 811), two working days of notice |
| Electric utilities | Southwestern Public Service, Lamb County Electric Cooperative, Lighthouse Electric Cooperative and South Plains Electric Cooperative |
| Interstate and US highways | Interstate 27, US 87 and US 70 |
| State Highways | 194 |
| State loops and spurs | Spur 369 |
| Creeks and other streams | Blackwater Draw |
| Railroads | BNSF Railway and short line railroads, about 62 main line miles |
| Average precipitation | 19.1 inches a year (1991 to 2020) |
| New housing units permitted | 6 in 2025 |
| Road distance from Trinity main office | About 324 miles from Yukon, Oklahoma to Plainview |
| Trinity insurance | General liability of $1,000,000 per occurrence and $4,000,000 aggregate, plus $5,000,000 excess liability |
Sources: Census Bureau (2024 population, 2025 building permits, TIGER/Line roads and water), EIA Form 861 (2025), NOAA 1991 to 2020 precipitation, federal rail network map, TxDOT districts, OpenStreetMap routing. Checked November 2026.
What Does a Bore Have to Cross in Hale County?
A bore in Hale County most often has to cross a highway such as Interstate 27, US 87 or US 70, Blackwater Draw and BNSF Railway track. State Highways 194 also run through the county, along with Spur 369. The named streams on the Census map are Blackwater Draw. The federal rail map shows about 62 miles of main line track in Hale County: BNSF Railway about 48 miles and short line and other operators about 14.

What Is the Ground Like for Directional Boring in Hale County?
Clay is the main thing to plan for in Hale County: the federal soil survey records a clay rich layer in the top five feet on about 87 percent of the county. For Hale County clay the drilling fluid is mixed to stop the cuttings from balling up behind the reamer. June is the wettest month in Hale County at 2.9 inches on average and January the driest at 0.6. Hale County averages 19.1 inches of precipitation a year, so the ground is usually dry at bore depth.
- Most common soils: Pullman (51%), Olton (19%) and Estacado (6%).
- Surface texture: most often clay loam (58%) or loam (30%).
- Bedrock within 5 feet: rare, on less than 1% of the county.
- Clay rich layer (35% clay or more) in the top 5 feet: about 87% of the county.
- Seasonal water table within 5 feet: about 7% of the county.
Source: USDA Natural Resources Conservation Service, Soil Survey Geographic Database, Hale County, Texas (survey area TX189, version 25, September 3, 2026), through Web Soil Survey. Percentages are shares of mapped county area.
Who Permits a Bore in Hale County?
The TxDOT Lubbock District permits bores under state highways in Hale County, the Hale County Commissioners Court handles county roads, and Plainview, Abernathy and Hale Center each handle their own streets.
- State highways. Interstate 27, US 87, US 70, the other numbered state routes and the farm to market roads in Hale County are on the state system. The utility owner files a TxDOT utility permit in RULIS.
- Texas811 locates. Texas811 needs at least two working days of notice before digging (Texas811 FAQ; Texas Utilities Code, Section 251.151).
- Railroads. A bore under BNSF Railway or short line track in Hale County needs a crossing agreement from the railroad that owns it, which sets the casing, depth and flagging.
- Water crossings. A bore under Blackwater Draw is checked for U.S. Army Corps of Engineers jurisdiction while the path is planned.
Statewide rules are on the Directional Boring Texas page, and Trinity supplies the bore plan and profile for the permit package.
Which Electric Utilities Serve Hale County?
Southwestern Public Service, Lamb County Electric Cooperative, Lighthouse Electric Cooperative and South Plains Electric Cooperative serve Hale County, according to 2025 filings with the U.S. Energy Information Administration. Southwestern Public Service is an investor owned utility; Lamb County Electric Cooperative, Lighthouse Electric Cooperative and South Plains Electric Cooperative are member owned cooperatives. The owner of the line sets the conduit size, depth and inspection steps, so it is confirmed before a conduit bore in Hale County is planned. More on electric line boring for electric cooperatives.
How Much New Construction Is There in Hale County?
Hale County permitted 6 new housing units in 2025, all single family homes, according to the Census Bureau Building Permits Survey. The population of Hale County went from 32,526 in 2020 to 31,953 in 2024, a loss of 1.8 percent. Most bore work in Hale County is replacement and upgrade of lines already in the ground.
Which Cities and Towns in Hale County Does Trinity Serve?
Trinity takes directional boring work in all 5 incorporated places in Hale County and at sites outside city limits, and Plainview is the largest with about 19,429 residents.
| City or town | 2024 population |
|---|---|
| Plainview | 19,429 |
| Abernathy | 2,147 |
| Hale Center | 2,000 |
| Petersburg | 971 |
| Edmonson | 87 |
Source: U.S. Census Bureau 2024 estimates, counting only the part of each city inside Hale County.
Hale County borders Castro County, Crosby County, Floyd County, Hockley County, Lamb County, Lubbock County and Swisher County; every county is on the Directional Boring in All 254 Texas Counties page. The neighboring county seats are Dimmitt (Castro), Crosbyton (Crosby), Floydada (Floyd), Levelland (Hockley), Littlefield (Lamb), Lubbock (Lubbock) and Tulia (Swisher).
Which Directional Boring Services Are Available in Hale County?
Every Trinity service is available in Hale County: horizontal directional drilling from 3/4 inch service lines to 48 inch casing, auger boring, hydrovac potholing, trenching and 24 hour emergency response, all listed under Underground Utility and Boring Services.
- Road, highway, railroad, creek and river bore crossings, including Interstate 27, US 87 and Blackwater Draw
- Bores under BNSF Railway track, built to the railroad boring requirements of the owner
- Drinkable water line boring and sewer force mains in Plainview or Abernathy and on rural water systems
- Underground conduit in Southwestern Public Service and Lamb County Electric Cooperative territory, see electric line boring
- Fiber optic boring for ISPs and broadband builders along Interstate 27
- Municipal boring services for cities such as Plainview, Abernathy and Hale Center
The free Bore Planner sizes a Hale County job before you call.
Hale County Directional Boring FAQs: What Do Customers Ask?
Does Trinity Boring Solutions work in Plainview, Texas?
Yes. Trinity Boring Solutions takes work in Plainview, Abernathy, Hale Center, Petersburg and Edmonson and the rural parts of Hale County. Trinity works in Texas with its own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted.
Who approves a bore under Interstate 27 in Hale County?
The TxDOT Lubbock District. The utility owner files the permit in the TxDOT RULIS system. County roads go through the Hale County Commissioners Court and city streets through the city.
Is there rock in Hale County?
Rarely. The federal soil survey records bedrock within five feet of the surface on less than 1 percent of Hale County. Potholing confirms it on the actual bore path.
Can a line be bored under Blackwater Draw in Hale County?
Yes. A drill is steered below the bed of Blackwater Draw from a pit on each bank and the pipe is pulled back through, so the channel is not opened. Federal jurisdiction over the crossing is checked first.
Which railroads have track in Hale County?
BNSF Railway and short line operators, with about 62 miles of main line track on the federal rail map. Each requires its own crossing agreement before a bore goes under the rails.
Is Trinity insured for work in Hale County?
Yes. Trinity Boring Solutions carries general liability of $1,000,000 per occurrence and $4,000,000 aggregate, plus $5,000,000 excess liability. Ask for a certificate with the quote.
How much does directional boring cost in Hale County?
A general range comes from the footage and the pipe size. Depth, the crossings and the ground set the number, and heavy clay is a factor on many Hale County jobs.
How Do You Get a Bore Quote in Hale County?
Call (405) 409-7423 any time or send the address in Hale County, the utility, the length and what it crosses. Trinity has bored since 1965 and is family owned.