Abernathy Texas Directional Boring: Olton Clay Loam, Interstate 27, BNSF Railway
Quick Answer: Avenue D and Avenue North are Abernathy’s longest named streets, and 64.25 public road miles sit within the city limits around BNSF Railway’s 2.47 track miles. We take directional boring, also called horizontal directional drilling (HDD), under streets and routes such as Interstate 27. The Yukon yard is 360 road miles away, so distance joins access and staging in the plan for US 87. Olton clay loam and deeper clay loam can grip a reamer, so we manage fluid and ream in stages.
Abernathy bores at a glance
- Incorporated city in Hale County and Lubbock County, Texas. Population 2,838 (Census Bureau 2024 estimate).
- Road distance from our Yukon, Oklahoma main office: 360 miles, about 6.7 hours of driving.
- Ground: Olton soil is mapped on 36 percent of the area, with clay loam about 40 inches down.
- Rock: no bedrock is mapped in the top 60 inches.
- Highways inside the boundary: Interstate 27, US 87, FM 2060, FM 597 and FM 54. State permit office: TxDOT Lubbock District.
- Railroad track inside the boundary: BNSF Railway, with 10 mapped street and rail crossings.
- Public water: City of Abernathy, groundwater wells.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Which contractor handles directional boring near BNSF Railway in Abernathy?
Abernathy is in Hale and Lubbock Counties, and the Census Bureau Vintage 2024 estimate puts its population at 2,838. Along Avenue D, Avenue H or a route toward US 87, we install water, sewer, gas, electric conduit and fiber by directional boring when the alignment and access fit. The City of Abernathy groundwater system makes existing utility locations important before a new service crosses a street.
Our main office is in Yukon, Oklahoma, and Abernathy work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our family business began in 1965, and we have done directional boring since 1982; we use that experience when planning in Abernathy. Our record of no utility strike in over 25 years matters when planning near Abernathy’s City water lines or BNSF Railway tracks.

What does the Olton soil survey show about ground in Abernathy?
The USDA soil survey maps Olton soil across 36 percent of Abernathy and Pullman across 30 percent. Its map units include Olton loam on 24 percent and Olton clay loam on 9 percent of the mapped area. About 40 inches down, clay loam is mapped across 71 percent, with sandy clay loam across 20 percent and clay across 8 percent. The survey gives an average clay content of 38 percent at that depth, so sticky cuttings and reamer buildup are considerations, not a substitute for site investigation.
| USDA soil survey, inside the Abernathy city limits | What is mapped |
|---|---|
| Soil series mapped | Olton 36 percent, Pullman 30 percent, Acuff 12 percent, Amarillo 8 percent and Randall 4 percent |
| Texture at the surface | loam 43 percent, clay loam 43 percent and fine sandy loam 8 percent |
| Texture about 40 inches down | clay loam 71 percent, sandy clay loam 20 percent and clay 8 percent |
| Engineering class about 40 inches down | lean clay (CL) 91 percent and fat clay (CH) 8 percent |
| Average clay content about 40 inches down | 38 percent |
| Bedrock mapped within 60 inches | None mapped |
| Seasonal water table within 60 inches | 8 percent of the area |
| Flood prone soils | 0 percent of the area |
| High corrosion risk for uncoated steel | 79 percent of the area |
Bedrock is not mapped in the top five feet of Abernathy, though that does not rule out rock at greater depth. A seasonal water table within 60 inches is mapped across 8 percent, so pits in those areas may need pumping. Around Abernathy, we plan boring carefully because flood prone soils are not mapped. High steel corrosion risk covers 79 percent, a reason for the line owner to review casing and tracer wire materials. The geologic map names Eolian sheet sand of Cenozoic age; the sandy surface over clayier soil below can change how the bore holds.
How do we drill Abernathy’s clay loam?
Olton clay loam and the survey’s deeper clay loam call for controlled fluid and staged reaming. Along routes such as Avenue D, we check actual ground and marked utilities before choosing the bore setup.
- Where Olton clay loam is present, we use a fluid mix suited to sticky cuttings and ream in stages to limit buildup around the tool.
- Because clay loam covers much of the mapped ground near Abernathy, we watch returns closely and keep pressure controlled beneath Interstate 27 pavement.
- For a proposed bore under Avenue D, we hydrovac pothole each marked utility first; surface paint shows its position but not its depth.
- We track the drill head from the surface and log depth and pitch, adjusting the route if the clayier layer below the surface changes steering.

Where might a line go under BNSF Railway in Abernathy?
Interstate 27, US 87, FM 2060, FM 597 and FM 54 run inside Abernathy’s limits. A highway crossing needs a bore plan that accounts for pavement and the road right of way. Avenue D is the longest named street at 1.53 miles, followed by Avenue North at 1.41 miles and Avenue H at 1.35 miles. The 64.25 public road miles include many potential street alignments, so a proposed route and its access points matter before we set pits.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| Interstate 27 | Interstate | 5.5 roadway miles inside | State highway office |
| US 87 | US highway | 5.4 roadway miles inside | State highway office |
| FM 2060 | State highway | 5.1 roadway miles inside | State highway office |
| FM 597 | State highway | 4.5 roadway miles inside | State highway office |
| FM 54 | State highway | 0.2 roadway miles inside | State highway office |
| BNSF Railway | Railroad | 2.47 track miles inside | The railroad |
| North Fork Dbl Mountain Fork Brazos River | Stream nearby | 0.4 miles outside | Checked for Corps of Engineers jurisdiction |
| North Fork Double Mountain Fork Brazos River | Stream nearby | 0.8 miles outside | Checked for Corps of Engineers jurisdiction |
BNSF Railway has 2.47 track miles inside Abernathy, on the BNSF Railway Plainview Subdivision, and public records map 10 street and rail crossings in the city. Any proposed track crossing needs an agreement from BNSF Railway that sets its crossing conditions. North Fork Dbl Mountain Fork Brazos River is 0.4 miles from the limits, and North Fork Double Mountain Fork Brazos River is 0.8 miles away. No named stream crossings are mapped inside the city.
Who approves work near Interstate 27 in Abernathy?
Interstate 27, US 87 and the FM roads are under TxDOT for work in highway right of way, with review through the TxDOT Lubbock District. The utility that owns the line submits the application in TxDOT’s online RULIS system; we prepare the bore plan and profile and work under that owner’s permit. TxDOT rules call for boring or tunneling beneath existing highway pavement, and a rural crossing must extend under all travel lanes. For BNSF Railway track, the railroad’s agreement sets crossing conditions. A planned crossing near North Fork Dbl Mountain Fork Brazos River is checked for U.S. Army Corps of Engineers jurisdiction.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Who owns the lines serving Abernathy in Hale County?
The City of Abernathy public water system uses groundwater wells and reports 1,350 service connections serving 2,865 people. That makes water lines a key locate concern when a new service follows Avenue H or crosses an existing route. Utilities reporting electric service in Hale County include Southwestern Public Service, Lamb County Electric Cooperative, Lighthouse Electric Cooperative and South Plains Electric Cooperative. The electric line owner for the specific address is confirmed before we plan a conduit bore.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| City of Abernathy | Public water system | Groundwater wells | 1,350 connections, 2,865 people served |
| Southwestern Public Service, Lamb County Electric Cooperative, Lighthouse Electric Cooperative and South Plains Electric Cooperative | Electric utilities reporting service in Hale County and Lubbock County | EIA Form 861 | Confirm the line owner by address |
The American Community Survey 2019 to 2023 five year estimates put Abernathy’s median housing year at 1967; 36 percent of units were built before 1960, 54 percent from 1960 to 1999 and 10 percent in 2000 or later. That mix can mean work for replacement lines as well as new services. For a proposed bore beneath Avenue D, we hydrovac pothole every marked utility on the path before drilling near it; paint shows position, not depth.

How far is Abernathy from Lubbock and our Yukon yard?
Abernathy spans Hale and Lubbock Counties at an elevation of 3,346 feet, across 3.2 square miles, and uses ZIP code 79311. New Deal is 6.5 miles south, Shallowater is 12.3 miles southwest, Idalou is 14.9 miles southeast, Petersburg is 14.9 miles east, and Hale Center is 16.5 miles north. Lubbock, the nearest larger city, is 18.4 miles south; Plainview, the Hale County seat, is 26.2 miles north. From the Yukon yard, the drive is 360 road miles and 6.7 hours, which affects mobilization planning.
Places near Abernathy
- Directional boring in New Deal: 6.5 miles south
- Directional boring in Shallowater: 12.3 miles southwest
- Directional boring in Idalou: 14.9 miles southeast
- Directional boring in Petersburg: 14.9 miles east
- Directional boring in Hale Center: 16.5 miles north
- Directional boring in Lubbock: 18.4 miles south
What kinds of bores come up near Avenue D in Abernathy?
- Highway crossing: A bore beneath Interstate 27 or US 87 keeps the proposed utility route below the highway pavement.
- Water service: A new connection near the City of Abernathy groundwater system needs a route checked against existing water lines.
- Fiber conduit: A conduit run along Avenue D can use a bore to pass beneath pavement rather than cut across the street.
- Rail crossing: A route beneath BNSF Railway track needs the railroad’s crossing agreement and its specified conditions.
- Drainage crossing: A proposed route near North Fork Dbl Mountain Fork Brazos River needs channel and jurisdiction review during planning.
- Street service: A line crossing Avenue H can be drilled beneath the paved route, with pits placed outside the travel path.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What do you need to quote a bore near North Fork Dbl Mountain Fork Brazos River in Abernathy?
Start with an address or map pin, such as a point on Avenue D or beside Interstate 27. Tell us what goes in the ground, such as water line or fiber conduit, then give its size and footage. A sketch or plans showing the route toward BNSF Railway or a nearby drainage crossing help us understand access and the proposed path.
For work in Abernathy, we set the price according to the job scope and the crossing work required. Olton clay loam and deeper clay affect drilling time and fluid handling; crossings of Interstate 27, BNSF Railway tracks or marked utilities add planning and exposure work. Concrete or pavement, creek access, pits, excavator time and sand backfill also matter. The 360 road miles from Yukon affect mobilization, while high profile or emergency work can change equipment and timing needs.
Questions people ask about boring in Abernathy
Does Trinity Boring Solutions take jobs in Abernathy, Hale County, and how are crews assigned?
Yes. Across Texas, we take directional boring work in Abernathy, including crossings on its incorporated city streets. Our main office is in Yukon, and work is done with our own crews or from satellite yards run by partner contractors we have vetted. The route, including any crossing of Interstate 27 or BNSF Railway, informs the crew and equipment plan.
What does a bore beneath BNSF Railway in Abernathy require?
A crossing beneath BNSF Railway needs an agreement from the railroad that owns the track. For Abernathy city street crossings, that agreement sets the conditions for casing, depth and flagging. Abernathy has 2.47 BNSF track miles, so a proposed route must be checked against the railroad alignment before a bore plan is prepared.
Can a line be bored beneath North Fork Dbl Mountain Fork Brazos River near Abernathy?
It may be possible, depending on the route, ground and access. North Fork Dbl Mountain Fork Brazos River is 0.4 miles from Abernathy’s limits, and a proposed river crossing is checked for U.S. Army Corps of Engineers jurisdiction during planning. The crossing plan must account for the channel rather than assume a street bore design will fit.
Who runs Abernathy’s public water system, and does its water come from groundwater wells?
In Abernathy, the City of Abernathy owns the public water system, and groundwater wells supply it; we account for it when planning underground work. Public records report 1,350 service connections and 2,865 people served. For work near Avenue H or another service route, existing water lines need to be located before the drill approaches.
Which electric line owner serves my Abernathy address in Hale County?
Public records list Southwestern Public Service, Lamb County Electric Cooperative, Lighthouse Electric Cooperative and South Plains Electric Cooperative as reporting service in Hale County. That county list does not identify the provider at every address. Confirm the specific line owner before planning an electric conduit bore near US 87 or another route.
Who controls Avenue H in Abernathy, and does a bore require cutting the street?
Because Abernathy is incorporated, we treat its city streets as city owned when planning directional boring crossings. A directional bore can pass beneath Avenue H without cutting the street surface, with work pits set outside the pavement. The exact route and access still need to be planned around marked utilities and the street layout.
How far is Abernathy from Lubbock and Trinity’s Yukon office, and does distance affect the job?
Lubbock is 18.4 miles south of Abernathy, while the Yukon yard is 360 road miles away and a 6.7 hour drive. That distance can affect crew mobilization and equipment logistics. A route along FM 2060 or near BNSF Railway also affects what equipment and planning the job needs.
How much Texas811 notice does an Abernathy bore along Avenue D need?
For a bore along Avenue D, request locates at least 48 hours before excavation starts, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before. Texas811 describes the lead time as at least two working days. If the start slips more than 14 days past the original notice, make a new request; refresh worn or moved marks through Texas811 before work continues.
What affects the cost of a directional bore near Interstate 27 in Abernathy?
The scope drives the price, including bore length and pipe or conduit size, Olton clay loam, utility crossings, pavement, pits and excavator time. A route beneath Interstate 27 or BNSF Railway needs added crossing planning. Creek access, sand backfill, emergency timing and mobilization from the Yukon yard also affect the work involved.
Where the Abernathy facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Abernathy
- U.S. Census Bureau, TIGER/Line 2024: Abernathy boundary, roads, rail lines and streams
- U.S. Census Bureau, Vintage 2024 population estimates: Abernathy
- U.S. Census Bureau, American Community Survey 2019 to 2023: Abernathy housing units and year built
- Macrostrat geologic map compilation: map units under Abernathy
- U.S. EPA Safe Drinking Water Information System: public water systems serving Abernathy
- U.S. Department of Transportation, North American Rail Network: track owners in Hale County and Lubbock County
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Hale County and Lubbock County
- U.S. Geological Survey, Elevation Point Query Service: Abernathy elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Abernathy
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Abernathy
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Abernathy, Texas
Type the address of your job in Abernathy. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Abernathy
County: Lubbock County directional boring. Same county: Plainview · Seth Ward · Edmonson · Wolfforth · Slaton · Ransom Canyon · Buffalo Springs Lake. All counties: Texas county list.
