Port O’Connor Texas Directional Boring: Galveston Sand, Live Oak Bayou, Highway 185
Quick Answer: We take directional boring, also called horizontal directional drilling (HDD), work in Port O’Connor, including routes near Live Oak Bayou, with our own crews and vetted drilling partners. The Yukon office is 549 road miles away, so a Texas State Highway 185 crossing affects how we plan mobilization. Fine sand is common in the mapped soils, and it can cave behind the drill head. Staged reaming and a prepared pipe help keep the bore moving.
Port O’Connor bores at a glance
- Unincorporated community in Calhoun County, Texas. Population 954 (2020 Census count).
- Road distance from our Yukon, Oklahoma main office: 549 miles, about 11.3 hours of driving.
- Ground: Galveston soil is mapped on 24 percent of the area, with fine sand about 40 inches down.
- Rock: no bedrock is mapped in the top 60 inches.
- Highways inside the boundary: Texas State Highway 185. State permit office: TxDOT Yoakum District.
- Railroad track inside the boundary: none mapped.
- Named streams inside the boundary: Live Oak Bayou.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Who handles directional boring near Live Oak Bayou in Port O’Connor?
From our Yukon yard, Port O’Connor is 549 road miles away, and we staff work with our own crews or vetted partner drilling contractors. The Census Bureau counted 954 residents in 2020; it does not publish yearly estimates for this unincorporated community in Calhoun County. Along Adams Street or near Live Oak Bayou, we install water, sewer, gas, electric conduit and fiber lines by bore when the route and site conditions fit.
Our main office is in Yukon, Oklahoma, and Port O’Connor work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our longest bore was roughly 4,100 feet under the Arkansas River in Tulsa, Oklahoma. A typical Port O’Connor job beside Live Oak Bayou is much shorter, with the route, access and ground setting the plan.

What does the soil survey show beneath Port O’Connor and Galveston soil?
The USDA soil survey maps Galveston soil across 24% of Port O’Connor, with Portalto across 23% and Dianola across 11%. At about 40 inches below the surface, fine sand is mapped under 48% of the area, while loamy fine sand covers 11% and fine sandy loam 4%. The survey also maps 59% of the area as sandy at that depth, with average clay content of 6%. Those mapped patterns point to ground that can cut easily but may not hold an open bore. They are useful for planning, but a specific Adams Street route still needs field checks.
| USDA soil survey, inside the Port O’Connor mapped community boundary | What is mapped |
|---|---|
| Soil series mapped | Galveston 24 percent, Portalto 23 percent, Dianola 11 percent and Arrada 4 percent |
| Texture at the surface | fine sand 48 percent, fine sandy loam 11 percent and loamy fine sand 4 percent |
| Texture about 40 inches down | fine sand 48 percent, loamy fine sand 11 percent and fine sandy loam 4 percent |
| Engineering class about 40 inches down | silty sand (SM) 59 percent and clayey sand (SC) 4 percent |
| Average clay content about 40 inches down | 6 percent |
| Bedrock mapped within 60 inches | None mapped |
| Seasonal water table within 60 inches | 42 percent of the area |
| Flood prone soils | 38 percent of the area |
| High corrosion risk for uncoated steel | 16 percent of the area |
Bedrock is not mapped in the top five feet of Port O’Connor, though that does not rule out rock deeper down. The USDA soil survey maps a seasonal water table within 60 inches across 42% of the area, so pits may need pumping. Flood prone soils cover 38%, which matters near Live Oak Bayou. High steel corrosion risk is mapped across 16%, a consideration for steel casing or tracer wire that the line owner can address with coating choices. The geologic map describes Pleistocene barrier island deposits, including sand, so the drill plan should allow for loose ground and changing conditions.
How do crews bore Port O’Connor’s fine sand?
Fine sand mapped around Port O’Connor can fall back into the bore after the bit passes. We plan the reaming sequence and have the pipe ready so the hole is not left open longer than needed.
- Fine sand is mapped under 48% of Port O’Connor at about 40 inches, so we use drilling fluid to help hold the bore open and ream in stages.
- Where the Portalto and Galveston soil patterns are sandy, we have the pipe laid out before the final ream to limit the time an open hole can cave.
- Seasonal water tables are mapped within 60 inches across 42% of the area, so we keep pits manageable and plan to pump water if a Harrison Avenue site fills.
- Near Live Oak Bayou, we plan the bore to pass beneath the channel and track the drill head from the surface while recording depth and pitch.

What might a bore cross near Live Oak Bayou in Port O’Connor?
Texas State Highway 185 runs 3.9 mapped roadway miles inside the Port O’Connor community boundary, with no other highway mapped within 1.5 miles outside it. The roadway is a state route, so a crossing needs a different review path from a local street bore. Adams Street is the longest named street at 3.31 miles, followed by Monroe Avenue at 2.84 miles and Harrison Avenue at 2.59 miles. A bore can pass under pavement without cutting it, but the route needs to account for traffic lanes, utilities and suitable entry and exit areas.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| Texas State Highway 185 | State highway | 3.9 roadway miles inside | State highway office |
| Live Oak Bayou | Stream | 2.93 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Big Dam Bayou | Stream nearby | 1 miles outside | Checked for Corps of Engineers jurisdiction |
No railroad is mapped inside Port O’Connor or within one mile outside the community boundary, and no street and rail crossings are mapped. Live Oak Bayou runs 2.93 channel miles through the community, with two mapped street crossings of named streams. A planned bore near the bayou needs a channel profile and careful depth planning. There are no lakes or ponds mapped within one mile, so the main mapped water crossing feature is the bayou.
Who approves a Port O’Connor bore in Calhoun County?
Port O’Connor is an unincorporated community, so it has no city government to approve street work. For a bore on a county street such as Adams Street, the county is the local authority to check about access and work in its right of way. Texas State Highway 185 is reviewed by the TxDOT Yoakum District. Electric and communication lines crossing the highway need at least 60 inches of cover below the lowest point of the crossed grade; water lines need 60 inches, and pressurized sewer lines need 60 inches. The utility owner files through TxDOT’s RULIS system, while we prepare the bore plan and profile for the utility’s permit. A Live Oak Bayou crossing is checked for Corps jurisdiction during planning.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Which utilities should you check in Port O’Connor and Calhoun County?
The provider for a particular Port O’Connor water address could not be matched from EPA drinking water records, which do not tie systems to towns in Texas. Confirm the address with the county or local water district before planning a bore near Live Oak Bayou. AEP Texas Central, Jackson Electric Cooperative and Victoria Electric Cooperative report electric service in Calhoun County. Those reports do not identify the owner at every address, so the line owner must be confirmed before we plan an electric conduit bore.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| AEP Texas Central, Jackson Electric Cooperative and Victoria Electric Cooperative | Electric utilities reporting service in Calhoun County | EIA Form 861 | Confirm the line owner by address |
The American Community Survey 2019 to 2023 five year estimates put the median Port O’Connor housing year at 1989. The survey says 14% of housing was built before 1960, 50% from 1960 to 1999 and 36% in 2000 or later. That mix can mean work around older lines as well as newer services along Harrison Avenue. Before drilling near marked utilities, we hydrovac pothole to expose them; paint shows a line’s position, not its depth.

What is near Port O’Connor, including Alamo Beach?
Port O’Connor is an unincorporated community in Calhoun County, with a mapped land area of 3.99 square miles and an elevation of 7 feet. Its ZIP code is 77982. Magnolia Beach is 11.1 miles northwest, and Alamo Beach is 12.4 miles northwest. Port Lavaca, the county seat and nearest larger city, is 17.3 miles northwest. Seadrift is 18.2 miles west. From the Yukon, Oklahoma main office, the drive is 549 road miles and 11.3 hours. That distance is part of mobilization planning for work on Texas State Highway 185 or a local street.
Places near Port O’Connor
- Directional boring in Magnolia Beach: 11.1 miles northwest
- Directional boring in Alamo Beach: 12.4 miles northwest
- Directional boring in Port Lavaca: 17.3 miles northwest
- Directional boring in Point Comfort: 17.5 miles northwest
- Directional boring in Seadrift: 18.2 miles west
Which Port O’Connor jobs call for a bore along Adams Street?
- Highway crossing: A bore under Texas State Highway 185 needs a route and cover plan that fits TxDOT review and the utility owner’s permit.
- Water service: A service run near Harrison Avenue needs the address specific water provider confirmed before the bore route is set.
- Electric conduit: Along Adams Street, we identify the electric line owner before planning a conduit path and expose marked utilities before drilling nearby.
- Fiber route: A fiber bore along Monroe Avenue can avoid an open cut through pavement when access and the marked utility locations allow.
- Creek crossing: A Live Oak Bayou bore needs channel depth planning and a check for Corps jurisdiction during the planning stage.
- Drainage work: Near mapped flood prone soils in Port O’Connor, a bore route needs depth and pit planning around wet ground.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What do you need to quote a Port O’Connor bore near Texas State Highway 185?
Start with an address or map pin. The exact spot matters near Texas State Highway 185 or Live Oak Bayou because the route can change the crossing and access plan. Tell us what is going in the ground, the pipe or conduit size and the footage. A sketch or plans help us review the proposed path and identify questions before pricing the work.
The 549 road miles from Yukon affect mobilization for a Port O’Connor job. Fine sand mapped in the area may call for staged reaming, while the route under Texas State Highway 185 can add depth and permit planning. Live Oak Bayou, pavement, exposed utilities, entry and exit pits, excavator time and sand backfill also affect the scope. Pipe size, footage and emergency or high profile conditions matter too. We price the work from the actual route and requirements, not one item alone.
Questions people ask about boring in Port O’Connor
Does Trinity Boring Solutions take directional boring work in Port O’Connor, Calhoun County?
Yes. We take directional boring work in Port O’Connor and staff it with our crews or partner contractors we have vetted. You work with Trinity from the first call through the bore log, regardless of who is on site. For a route near Adams Street, we review the address, line type, size and footage before planning.
Will a Port O’Connor bore hit rock beneath the sandy ground?
The USDA soil survey does not map bedrock in the top five feet of Port O’Connor, but that does not rule out rock deeper down. The geologic map identifies Pleistocene barrier island deposits, including sand. A route near Live Oak Bayou still needs field assessment because mapped ground patterns cannot confirm the exact material at a bore location.
Who approves a bore under Texas State Highway 185 in Port O’Connor?
TxDOT reviews work on Texas State Highway 185 through the Yoakum District. The utility owner, not the drilling contractor, submits the utility permit application through RULIS. We provide the bore plan and profile and work under the permit issued to the owner. The approved cover depth depends on the type of line and the permit.
Can a line be bored under Live Oak Bayou in Port O’Connor?
A bore can be planned beneath Live Oak Bayou, which runs 2.93 channel miles through the community. The route needs a suitable depth under the channel, and the crossing is checked for U.S. Army Corps of Engineers jurisdiction during planning. Local soil and water conditions also guide the entry and exit pit plan.
Which electric company owns the line at my Port O’Connor address in Calhoun County?
AEP Texas Central, Jackson Electric Cooperative and Victoria Electric Cooperative report electric service in Calhoun County, but those records do not establish the owner at every Port O’Connor address. Confirm the specific line owner before setting conduit specifications. On an Adams Street route, marked utilities should be exposed before the drill approaches them.
Who controls Harrison Avenue in Port O’Connor, and does it need to be cut?
Port O’Connor has no city government because it is an unincorporated community, so the county is the local authority to check about Harrison Avenue work. A directional bore can pass below pavement without an open cut, subject to the route and approvals. We locate and expose marked lines before drilling near them.
How much notice does Texas811 need for a Port O’Connor bore on Adams Street?
For an Adams Street excavation, Texas law requires a Texas811 locate request at least 48 hours before work starts, excluding Saturdays, Sundays and legal holidays. The request cannot be made more than 14 days before excavation. If the start moves more than 14 days past the original notice, make a new request; refresh worn or moved marks through Texas811 before continuing.
How far is Port O’Connor from Trinity’s Yukon office, and does Port Lavaca help?
Port O’Connor is 549 road miles and 11.3 hours by drive from our Yukon, Oklahoma main office. Port Lavaca is 17.3 miles northwest and is the county seat, but it is not a Trinity office. The Yukon distance affects mobilization planning, while a local site such as Texas State Highway 185 shapes the bore scope.
What affects the cost of a directional bore near Texas State Highway 185 in Port O’Connor?
Cost depends on the job details, not a single rate. For a Port O’Connor route, the drive from Yukon, fine sand, pipe size and footage all matter. So do Texas State Highway 185 permit and cover requirements, Live Oak Bayou or drainage crossings, marked utilities, pavement, pits, backfill and any emergency or high profile conditions.
Where the Port O’Connor facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Port O’Connor
- U.S. Census Bureau, TIGER/Line 2024: Port O’Connor boundary, roads, rail lines and streams
- U.S. Census Bureau, 2020 Census: Port O’Connor population count
- U.S. Census Bureau, American Community Survey 2019 to 2023: Port O’Connor housing units and year built
- Macrostrat geologic map compilation: map units under Port O’Connor
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Calhoun County
- U.S. Geological Survey, Elevation Point Query Service: Port O’Connor elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Port O’Connor
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Port O’Connor
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Port O'Connor, Texas
Type the address of your job in Port O'Connor. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Port O'Connor
All counties: Texas county list.
