trinityboringsolutions.com

Presidio Texas Directional Boring: Corazones Soil, US 67 Business and Río Grande

Quick Answer: The Río Grande is a major obstacle for a utility route, and Trinity Boring Solutions takes directional boring, also called horizontal directional drilling (HDD), work in Presidio, Texas. Presidio is 679 road miles from our Yukon, Oklahoma main office, so distance matters for a job near US 67 Business. Corazones soil covers 81 percent of the mapped area, with extremely gravelly loamy coarse sand below, so the hole needs support against caving. We plan around the route, expose marked lines and track the drill head as the bore advances.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Presidio bores at a glance

  • Incorporated city in Presidio County, Texas. Population 3,047 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 679 miles, about 13.4 hours of driving.
  • Ground: Corazones soil is mapped on 81 percent of the area, with extremely gravelly loamy coarse sand about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 7 percent of the area.
  • Highways inside the boundary: US 67 Business, US 67, FM 170 and Spur 203. State permit office: TxDOT El Paso District.
  • Railroad track inside the boundary: Texas Pacifico, with 7 mapped street and rail crossings.
  • Named streams inside the boundary: Río Grande and Small Creek.
  • Public water: City of Presidio, groundwater wells.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Does anyone do directional boring near the Río Grande in Presidio?

Yes, Trinity Boring Solutions takes directional boring work in Presidio, Presidio County, including routes near the Río Grande. We plan underground work in Presidio around a population of 3,047, the Census Bureau Vintage 2024 estimate. We install water, sewer, gas, electric conduit and fiber lines, routing them beneath streets such as Market Street or around crossings where a surface cut would disrupt the route.

Our main office is in Yukon, Oklahoma, and Presidio work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Since 1982, four decades of directional boring have taught us to plan for loose gravelly ground like the soil mapped around Presidio and to keep the bore path controlled. We stay involved from the first call through the bore log, whichever crew is on site.

Ditch Witch JT922 compact directional drill beside the Trinity Boring Solutions truck at NE 24th Street in Oklahoma City
Our Ditch Witch JT922 compact directional drill beside the Trinity truck on a sleeve bore at NE 24th Street in Oklahoma City. Photos on this page are from our jobs in Oklahoma and Texas.

What is Corazones soil like to bore in Presidio?

Corazones soil is the main mapped soil in Presidio, covering 81 percent of the city area in the USDA soil survey. Its surface texture is gravelly sandy loam, and at about 40 inches the mapped texture is extremely gravelly loamy coarse sand. The survey maps sandy ground across 81 percent of the area at that depth, while average clay content is 10 percent. For boring work in Presidio, we use mapped soil patterns as guidance, not as a substitute for test borings. Loose sand and gravel can cave behind a drill head, so the bore needs fluid support and staged reaming.

USDA soil survey, inside the Presidio city limitsWhat is mapped
Soil series mappedCorazones 81 percent, Vicente 9 percent and Geefour 7 percent
Texture at the surfacegravelly sandy loam 81 percent, loam 9 percent and clay 7 percent
Texture about 40 inches downextremely gravelly loamy coarse sand 81 percent, stratified loam to silt loam to clay loam 9 percent and clay 7 percent
Engineering class about 40 inches downgraded gravel with silt (GW GM) 81 percent, lean clay (CL) 11 percent and fat clay (CH) 7 percent
Average clay content about 40 inches down10 percent
Bedrock mapped within 60 inches7 percent of the area (0 percent hard rock, 7 percent weathered rock)
Seasonal water table within 60 inches0 percent of the area
Flood prone soils12 percent of the area
High corrosion risk for uncoated steel16 percent of the area

The USDA soil survey maps weathered bedrock within 60 inches across 7 percent of Presidio; in mapped areas, typical bedrock depth is 18 inches. Hard bedrock is not mapped in the top five feet. Seasonal water table conditions are not mapped within 60 inches, while flood prone soils cover 12 percent of the area. High steel corrosion risk is mapped in 16 percent, so the line owner should consider casing and tracer wire materials. The geologic map identifies Holocene Alluvium along streams, with sand, silt, clay and gravel that can vary along a route.

What does it take to bore Presidio’s extremely gravelly loamy coarse sand?

In Presidio, the mapped extremely gravelly loamy coarse sand calls for a bore plan that keeps the hole stable as the drill advances. We match fluid, reaming and tracking to the Corazones soil pattern and the actual route.

  1. Corazones soil is gravelly and sandy at depth, so we support the bore wall with drilling fluid and ream in stages to limit collapse behind the bit.
  2. Gravel can steer the drill head off line near a Presidio street, so we check depth and pitch at each rod as the bore proceeds.
  3. Before a route near the Río Grande gets close to a marked utility, we hydrovac pothole that line because surface marks do not show its depth.
  4. We track the drill head from the surface and log depth and pitch, keeping a record for routes near US 67 Business and the Texas Pacifico tracks.
6 inch Schedule 40 PVC sleeve in a bore pit in sandy soil on a water main crossing at NE 24th Street, Oklahoma City
A 6 inch Schedule 40 PVC sleeve in a bore pit in sandy soil on a water main crossing in Oklahoma City.

Where does a line have to go under US 67 Business in Presidio?

A route under US 67 Business in Presidio may need to cross a city street, highway or other mapped corridor without cutting the surface. US 67 and FM 170 also run inside the city limits, along with Spur 203. The mapped street network includes Louvain Boulevard at 1.68 miles, Bledsoe Boulevard at 1.5 miles, and Cassell Street and Market Street at 1.29 miles each. The exact address determines the crossings and access for entry and exit pits.

CrossingTypeMapped extentWho has a say
US 67 BusinessUS highway1.8 roadway miles insideState highway office
US 67US highway1.8 roadway miles insideState highway office
FM 170State highway3.1 roadway miles insideState highway office
Spur 203State highway0.1 roadway miles insideState highway office
Texas PacificoRailroad3.21 track miles insideThe railroad
Río GrandeStream0.54 channel miles insideChecked for Corps of Engineers jurisdiction
Small CreekStream0.14 channel miles insideChecked for Corps of Engineers jurisdiction
Cibolo CreekStream nearby0.1 miles outsideChecked for Corps of Engineers jurisdiction
Arroyo MimbrosoStream nearby0.6 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

Texas Pacifico owns 3.21 track miles inside Presidio, and public mapping shows 7 street and rail crossings in the city. The Río Grande runs 0.54 channel miles inside the limits, and Small Creek runs 0.14 channel miles; mapped streets cross named streams at 4 locations. A stream route needs a depth plan that stays below the channel. The Río Grande and the mapped stream crossings should be reviewed during planning for federal water jurisdiction.

Do I need a permit to bore under Texas Pacifico tracks in Presidio?

For work in Presidio, the line owner, not the driller, applies for a TxDOT utility permit when a bore uses the right of way of US 67 Business, US 67, FM 170 or Spur 203. The TxDOT El Paso District reviews the filing in RULIS, and we prepare the bore plan and profile for the owner’s application. For electric or communication lines, the cover is at least 60 inches at a highway crossing and 48 inches along the right of way; water requires 60 inches at crossings and 36 inches along it, while pressurized sewer requires 60 inches at crossings. Texas Pacifico track crossings need an agreement with the railroad owner. A Río Grande crossing is checked for Army Corps jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Whose lines are already buried in Presidio County?

The City of Presidio public water system serves 5,514 people through 2,143 service connections, using groundwater wells. For electric service in Presidio County, AEP Texas North and Rio Grande Electric Cooperative report to the Energy Information Administration. That county information does not identify the electric provider at every address, so we confirm the line owner before planning an electric conduit bore near Market Street or elsewhere in Presidio.

Line ownerWhat it isSourceSize
City of PresidioPublic water systemGroundwater wells2,143 connections, 5,514 people served
AEP Texas North and Rio Grande Electric CooperativeElectric utilities reporting service in Presidio CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Presidio’s median housing year at 1991; 12 percent of homes were built before 1960, 71 percent from 1960 to 1999 and 17 percent in 2000 or later. A bore on Bledsoe Boulevard may serve a replacement line or a newer service, and the route needs checking either way. We hydrovac pothole each marked utility on the path before drilling near it, since locate paint shows position, not depth.

Yellow polyethylene gas pipe pulled through a directional bore beside a commercial building
Yellow polyethylene gas pipe pulled through a directional bore beside a commercial building.

How far is Redford from Presidio?

Presidio is in Presidio County, at 2,578 feet elevation, and covers 2.57 square miles. We use ZIP code 79845 to identify Presidio in boring schedules, while recognizing it does not describe subsurface conditions. Redford is 14.3 miles southeast, and Marfa, the county seat, is 55.7 miles north. Presidio is 679 road miles and a 13.4 hour drive from our Yukon, Oklahoma yard. That distance affects mobilization for a bore near US 67 Business, so the location and work scope help us plan equipment and crew travel.

Places near Presidio

What would we bore near Louvain Boulevard in Presidio?

  • Highway crossing: A bore beneath US 67 Business keeps a utility route below the road surface, with pits placed outside the travel lanes.
  • Water service: A line serving the City of Presidio system can be routed beneath Market Street without cutting the pavement.
  • Fiber route: A conduit near Louvain Boulevard can use a bore path that avoids an open cut through the street.
  • Creek crossing: A proposed route near Small Creek needs a depth plan that accounts for the channel and its mapped street crossings.
  • Rail crossing: A bore beneath Texas Pacifico tracks needs coordination with the railroad owner and its crossing agreement.
  • Street utility: A replacement line along Bledsoe Boulevard can be bored after marked utilities on the path are exposed by hydrovac.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What should I send for a Presidio bore near Market Street?

Send the map pin or address first; a point near Market Street may have a different route and set of crossings than one near the Río Grande. Include what will go underground, the pipe or conduit size and the footage. A sketch or plans help us identify the bore path, access for pits and any highway, track or drainage crossings.

The 679 road miles from Yukon put mobilization on the scope for a Presidio job. Corazones gravelly ground can affect drilling and fluid needs, while a crossing of US 67 Business or Texas Pacifico adds route and coordination details. We also account for bore length and size, utilities to expose, pavement or concrete, creek or drainage crossings, pits, excavator time and sand backfill. High profile or emergency work can require a different plan.

Questions people ask about boring in Presidio

Does Trinity Boring Solutions take jobs in Presidio County, and who staffs a Presidio bore?

Yes, we take directional boring jobs in Presidio County and staff the work with our own crews or partner contractor crews from satellite yards. Our main office is in Yukon, Oklahoma, and you work with Trinity through the job rather than being handed off based on which crew is on site. We plan the route around Presidio features such as US 67 Business.

Can a utility line be bored under the Río Grande in Presidio?

A bore under the Río Grande can be planned, but the route and ground conditions have to be reviewed before drilling. The river runs 0.54 channel miles inside Presidio, and its crossing needs a depth plan below the channel. We check US Army Corps of Engineers jurisdiction during planning for a Presidio crossing, since jurisdiction can affect permitting.

Who runs Presidio’s public water system, and where does its water come from?

The City of Presidio owns the public water system, which draws from groundwater wells. We consider Presidio’s system serving 5,514 people through 2,143 service connections when planning underground work. That information helps frame a water line project near Market Street, but the route and existing lines still need to be checked at the job address.

Which electric providers report service in Presidio County, and who confirms a Presidio conduit line?

AEP Texas North and Rio Grande Electric Cooperative report electric service in Presidio County. Those county reports do not establish which provider serves a particular Presidio address. Before we plan conduit near US 67 Business or a residential street, the line owner must be confirmed so the bore matches the owner’s requirements.

Does Presidio control Cassell Street, and would a bore there need the pavement cut?

Presidio is incorporated, so its city streets, including Cassell Street, belong to the city. A directional bore can pass beneath pavement without cutting across the street, with entry and exit pits set in the ground beside the route. The exact alignment and marked utilities determine the bore plan.

What do Presidio’s housing ages near Bledsoe Boulevard mean for replacement bores?

Presidio’s median housing year is 1991, according to the American Community Survey 2019 to 2023 five year estimates. A route near Bledsoe Boulevard could involve an older line replacement or a newer service, so we check the marked utilities before drilling near them. Potholing verifies where a line sits below the surface.

What bore sizes and lengths can Trinity handle for a Presidio job near Market Street?

We handle Presidio work from 3/4 inch service lines up to 48 inch casing, with bore lengths from 10 feet to 5,000 feet. The route near Market Street, the line being installed and the mapped Corazones gravelly soil all help determine equipment and the drilling plan.

How much notice does Texas811 need for a Presidio bore near Louvain Boulevard?

For a bore near Louvain Boulevard, Texas law requires a locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before work. For a Presidio bore, we allow Texas811’s notice period of at least two working days before digging. If the start slips more than 14 days past the original notice, make a new request; worn or moved marks must be refreshed through Texas811 before work continues.

What affects the price of directional boring in Presidio under US 67 Business?

The job route and scope set the price for a Presidio bore under US 67 Business. We consider the 679 road miles from Yukon, the length and size of the line, and whether Corazones gravelly soil changes drilling needs. Highway or Texas Pacifico crossings, marked utilities, pavement, pits, drainage crossings, excavator time and backfill also affect the work.

Where the Presidio facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Presidio

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Presidio, Texas

Type the address of your job in Presidio. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Presidio

Same county: Marfa. All counties: Texas county list.