trinityboringsolutions.com

Marfa Texas Directional Boring: Clay Loam, Alamito Creek, Union Pacific

Quick Answer: Marfa clay loam can hold a bore hole open, and we take directional boring and horizontal directional drilling (HDD) work near Alamito Creek. Marfa is 619 road miles from our Yukon, Oklahoma main office, with Union Pacific track crossings to plan around. The USDA soil survey maps clay loam at 40 inches across 33% of the area. Sticky clay can grip pipe, so we manage drilling fluid and ream in stages.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Marfa bores at a glance

  • County seat of Presidio County, Texas. Population 1,641 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 619 miles, about 12.2 hours of driving.
  • Ground: Marfa soil is mapped on 33 percent of the area, with clay loam about 40 inches down.
  • Rock: no bedrock is mapped in the top 60 inches.
  • Highways inside the boundary: US 90, US 67, Texas State Highway 17, RM 2810 and FM 1112. State permit office: TxDOT El Paso District.
  • Railroad track inside the boundary: Union Pacific, with 5 mapped street and rail crossings.
  • Named streams inside the boundary: Alamito Creek.
  • Public water: City of Marfa, groundwater wells.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Which contractor handles directional boring in Marfa and Presidio County?

Marfa clay loam can hold a bore hole open, and Trinity Boring Solutions takes directional boring jobs in Marfa, Presidio County. The Census Bureau Vintage 2024 estimate puts the city population at 1,641. We install water, sewer, gas, electric conduit and fiber lines beneath routes such as San Antonio Street, US 90 and US 67, where an open cut would disturb the road.

Our main office is in Yukon, Oklahoma, and Marfa work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our longest bore was roughly 4,100 feet of 48 inch pipe under the Arkansas River in Tulsa, a different scale from a typical Marfa service crossing near Columbia Street. We have drilled directionally since 1982, and our family business began in 1965.

Horizontal directional drill rig set up on an open grass field with support trucks and a vacuum excavation truck
Our horizontal directional drill set up in an open field with the support trucks and the vacuum excavation truck. Photos on this page are from our jobs in Oklahoma and Texas.

What does Marfa clay loam mean for a bore in Marfa?

Marfa soil is a major mapped soil series, and its clay loam texture can make a bore hole hold its shape while also making cuttings sticky. The USDA soil survey maps Marfa clay loam, 0 to 2 percent slopes, occasionally flooded across 33% of the city area. Clay loam is also the leading listed texture at about 40 inches, covering 33%; heavy clay, classified CH there, covers 35%. Sandy ground is mapped at that depth across 19%. We use Marfa mapped soil patterns as planning context, not as a substitute for test borings along a proposed route.

USDA soil survey, inside the Marfa city limitsWhat is mapped
Soil series mappedMarfa 33 percent, Chilimol 21 percent, Espy 19 percent, Murray 16 percent and AREA NOT SURVEYED 7 percent
Texture at the surfacefine sandy loam 35 percent, clay loam 35 percent and very gravelly loam 21 percent
Texture about 40 inches downclay loam 33 percent, very gravelly loam 21 percent and loamy sand 19 percent
Engineering class about 40 inches downfat clay (CH) 35 percent, clayey gravel (GC) 21 percent and silty sand (SM) 19 percent
Average clay content about 40 inches down25 percent
Bedrock mapped within 60 inchesNone mapped
Seasonal water table within 60 inches0 percent of the area
Flood prone soils33 percent of the area
High corrosion risk for uncoated steel3 percent of the area

Across Marfa, bedrock does not appear in the mapped top five feet, but that does not rule out deeper rock. The geologic map lists Holocene alluvium along streams and Miocene volcanic rocks, so a route near Alamito Creek may meet changing ground. Seasonal water tables are not mapped, while flood prone soils cover 33% of the area. High steel corrosion risk is mapped across 3%, a reason for the line owner to consider casing and tracer wire materials; HDPE avoids that soil corrosion concern.

How do we drill Marfa clay loam in Marfa?

For Marfa routes through clay loam, we control fluid and open the hole in stages so sticky cuttings do not load the reamer or grip the pipe. The plan also changes near Alamito Creek.

  1. In Marfa clay loam, we use a thinner drilling fluid with polymer and ream in stages to manage sticky cuttings that can build on the reamer.
  2. Where clay near Alamito Creek is heavy, we watch fluid returns closely so pressure does not lift pavement or creek bank surfaces.
  3. With sandy or gravelly Marfa soils, we build a bentonite wall and stage the ream; the pipe is ready before the final pass.
  4. Near the mapped gravelly ground and street crossings in Marfa, we check drill depth and pitch at every rod to hold the planned line.
6 inch Schedule 40 PVC sleeve in a bore pit in sandy soil on a water main crossing at NE 24th Street, Oklahoma City
A 6 inch Schedule 40 PVC sleeve in a bore pit in sandy soil on a water main crossing in Oklahoma City.

What does a bore have to cross in Marfa near Alamito Creek?

A Marfa bore may cross US 90, US 67, Texas State Highway 17, RM 2810 or FM 1112, each of which has mapped roadway mileage inside the city limits. San Antonio Street is the longest named street at 1.5 miles, followed by Hill Street at 1.3 miles and Washington Street at 1.2 miles. Columbia Street adds another route to check. Those road and street crossings affect the bore path, work space and permit review.

CrossingTypeMapped extentWho has a say
US 90US highway1.5 roadway miles insideState highway office
US 67US highway0.8 roadway miles insideState highway office
Texas State Highway 17State highway1 roadway miles insideState highway office
RM 2810State highway0.7 roadway miles insideState highway office
FM 1112State highway0.4 roadway miles insideState highway office
Union PacificRailroad1.32 track miles insideThe railroad
Alamito CreekStream0.75 channel miles insideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

Union Pacific has 1.32 track miles in Marfa on its Valentine Subdivision, and public maps show 5 street and rail crossings in the city. Alamito Creek runs 0.75 channel miles within city limits, with 6 mapped street crossings of named streams across Marfa. A creek route needs depth planning under the channel and a check for federal waterway jurisdiction. For Marfa routing, we account for the mapped absence of lakes or ponds within one mile.

Do I need a permit to bore near Union Pacific in Marfa?

A Marfa bore in the right of way of US 90 or another named state route needs a TxDOT utility permit, reviewed by the TxDOT El Paso District. The utility that owns the line submits through RULIS; we prepare the bore plan and profile for that owner’s application. Under existing highway pavement, the route must be bored or tunneled, with the crossing encased. A Union Pacific track crossing needs an agreement from the railroad, and TxDOT asks for a copy if the line also occupies highway right of way. Alamito Creek is checked for U.S. Army Corps of Engineers jurisdiction during planning. Marfa city streets belong to the city.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

What is already in the ground in Marfa near the City of Marfa system?

The City of Marfa public water system uses groundwater wells and reports 1,329 service connections serving 1,788 people. For a bore near that water network, we hydrovac pothole marked lines before drilling close, since surface paint does not show depth. AEP Texas North and Rio Grande Electric Cooperative report electric service in Presidio County. We confirm the electric line owner for the particular Marfa route before planning a conduit bore.

Line ownerWhat it isSourceSize
City of MarfaPublic water systemGroundwater wells1,329 connections, 1,788 people served
AEP Texas North and Rio Grande Electric CooperativeElectric utilities reporting service in Presidio CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Marfa’s median housing year at 1953; 65% of units were built before 1960, 30% from 1960 to 1999 and 5% in 2000 or later. That older housing stock can mean a project replaces existing lines, while newer work may add a service along San Antonio Street. We expose each marked utility on the bore path with hydrovac before the drill approaches.

Hydrovac truck and boring equipment staged beside an airport taxiway for utility daylighting in Oklahoma City
Our hydrovac truck and boring equipment beside an airport taxiway in Oklahoma City, set up to expose a utility crossing.

Where is Marfa in relation to Alpine and Trinity’s Yukon yard?

Marfa is the county seat of Presidio County in far West Texas, at an elevation of 4,698 feet. The incorporated city covers 1.62 square miles and uses ZIP code 79843. Fort Davis is 20.1 miles northeast, while Alpine is 21.8 miles east and is the nearest larger city. Valentine is 33.9 miles northwest. Marfa is 619 road miles and a 12.2 hour drive from our Yukon, Oklahoma main office, so distance affects crew mobilization for a job near US 90.

Places near Marfa

What kinds of bores come up on San Antonio Street in Marfa?

  • Highway crossing: A bore beneath US 90 keeps the crossing out of the pavement, with the utility owner arranging the TxDOT permit.
  • Water service: A new connection near the City of Marfa system needs marked water lines exposed before the drill approaches.
  • Fiber route: A conduit bore along San Antonio Street can avoid opening pavement while marked utilities are pothole checked.
  • Creek crossing: A line beneath Alamito Creek needs a route planned below the channel and a jurisdiction check during planning.
  • Rail crossing: A bore beneath Union Pacific track needs the railroad’s agreement to set crossing details and flagging.
  • Street replacement: A sewer or water line beneath Columbia Street can pass below the traveled surface instead of through an open cut.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What do you need to quote a bore near Columbia Street in Marfa?

To quote a Marfa job near Columbia Street, send the address or map pin, what will go in the ground, pipe or conduit size and footage; a sketch or plans help. The route matters because Columbia Street, Alamito Creek and the Union Pacific track each bring different crossing details for us to review.

Marfa clay loam is the first cost factor because sticky cuttings can call for staged reaming and careful fluid control. We also account for pipe size and bore length, the utilities that need exposure, and pavement or concrete along streets such as Columbia Street. An Alamito Creek crossing or Union Pacific track crossing adds planning needs. Pits, excavator time and sand backfill matter too, as does mobilization from Yukon for the 619 road mile trip.

Questions people ask about boring in Marfa

Does Trinity Boring Solutions take directional boring jobs in Marfa and Presidio County?

Yes, we take directional boring work in Marfa, and the staffing plan uses our crews and satellite yards run by drilling contractor partners we have vetted. We keep one point of contact from the first call through the bore log, including for work near San Antonio Street or Alamito Creek.

Could a bore in Marfa encounter rock?

Bedrock is not shown in the mapped top five feet of Marfa, but that does not rule out rock at greater depth. The geologic map lists Holocene alluvium along streams and Miocene volcanic rocks, so a route near Alamito Creek still needs planning for changing ground.

Who approves a bore under US 90 in Marfa, and which state office reviews it?

For a Marfa bore in the US 90 right of way, TxDOT reviews the utility permit through its El Paso District. The utility owner submits the application in RULIS, and we prepare the bore plan and profile for that filing. TxDOT’s crossing requirements can set depth and installation details.

What should we plan for when a Marfa bore crosses Union Pacific track?

Union Pacific owns the 1.32 track miles mapped in Marfa. A crossing beneath that track needs an agreement from the railroad, which sets requirements such as casing, depth and flagging. If the line also lies in highway right of way, TxDOT asks for a copy of the agreement.

Can a line be bored beneath Alamito Creek in Marfa?

A line can be planned beneath Alamito Creek, which runs 0.75 channel miles within Marfa, but the route needs depth planning below the channel. We check US Army Corps of Engineers jurisdiction during planning for a Marfa crossing. Nearby street crossings of named streams also need careful route coordination.

Who runs Marfa’s public water system, and where does its water come from?

The City of Marfa owns the public water system, which gets water from groundwater wells. The system reports 1,329 service connections serving 1,788 people. Near its lines, marked utilities need to be exposed before a bore approaches, including routes along San Antonio Street.

How much notice does Texas811 need for a Marfa bore on San Antonio Street?

For a bore on San Antonio Street, the locate request goes to Texas811 at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before. If work starts more than 14 days after the original notice, request another ticket; have worn or moved marks refreshed before work continues.

How far is Marfa from Yukon, and does Alpine affect the job schedule?

From our Yukon, Oklahoma main office, we plan around the 619 road miles and 12.2 hour drive to Marfa. Alpine is 21.8 miles east of Marfa, but the Yukon distance is what affects crew mobilization for work near US 90 or Alamito Creek.

What affects the cost of directional boring under US 90 in Marfa?

For a Marfa route under US 90, soil and rock conditions are a key factor: mapped clay loam can need staged reaming and controlled fluid. Cost also reflects bore length and pipe size, exposed utilities, pavement, crossings such as Union Pacific track or Alamito Creek, pits and excavator time, and mobilization from Yukon.

Where the Marfa facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Marfa

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Marfa, Texas

Type the address of your job in Marfa. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Marfa

Same county: Presidio · Redford. All counties: Texas county list.