trinityboringsolutions.com

Goliad Texas Directional Boring: Weesatche Soil, US 183 and San Antonio River

Quick Answer: For work along US 183, Goliad is 525 road miles from our Yukon yard, and we staff it with our own crews and vetted partner drilling contractors. Trinity Boring Solutions handles directional boring, also called horizontal directional drilling (HDD), for routes near the San Antonio River in Goliad. Weesatche sandy clay loam is common here, and sticky clay can build up on a reamer. A bore along San Patricio Street can pass beneath pavement without opening a trench across it.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Goliad bores at a glance

  • County seat of Goliad County, Texas. Population 1,716 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 525 miles, about 10.1 hours of driving.
  • Ground: Weesatche soil is mapped on 26 percent of the area, with sandy clay loam about 40 inches down.
  • Rock: no bedrock is mapped in the top 60 inches.
  • Highways inside the boundary: US 183, US 77 Alternate, US 59 and Texas State Highway 239. State permit office: TxDOT Corpus Christi District.
  • Railroad track inside the boundary: none mapped.
  • Named streams inside the boundary: San Antonio River.
  • Public water: City of Goliad, groundwater wells.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who can I call for directional boring near the San Antonio River in Goliad?

Goliad is 525 road miles from our Yukon yard; our own crews and vetted partner drilling contractors staff work near US 183. The Census Bureau Vintage 2024 estimate puts the city population at 1,716. Along San Patricio Street or Jefferson Street, our crews install water, sewer, gas, electric conduit and fiber lines by directional boring when the route and site conditions fit.

Our main office is in Yukon, Oklahoma, and Goliad work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. We started directional boring in 1982. Four decades of drilling matter around Goliad’s mapped Weesatche soil, where sticky clay and pebbly material can affect how we open and hold a bore.

Horizontal directional drill rig set up on an open grass field with support trucks and a vacuum excavation truck
Our horizontal directional drill set up in an open field with the support trucks and the vacuum excavation truck. Photos on this page are from our jobs in Oklahoma and Texas.

What is Weesatche soil like to bore in Goliad?

The USDA soil survey maps Weesatche across 26 percent of Goliad, including Weesatche sandy clay loam on 1 to 3 percent slopes and 3 to 5 percent slopes. Sandy clay loam makes up 43 percent of mapped surface texture and 30 percent at about 40 inches below the surface. The survey also maps sandy clay at that depth across 22 percent of the area and fine sandy loam across 13 percent. We treat the mapped Weesatche soil pattern as planning context, not as a substitute for test borings. Clay can cling to the reamer, so the field plan may call for staged reaming and a same day pullback.

USDA soil survey, inside the Goliad city limitsWhat is mapped
Soil series mappedWeesatche 26 percent, Papalote 18 percent, Sarnosa 13 percent, Pettus 11 percent and Parrita 8 percent
Texture at the surfacesandy clay loam 43 percent, fine sandy loam 34 percent and loam 11 percent
Texture about 40 inches downsandy clay loam 30 percent, sandy clay 22 percent and fine sandy loam 13 percent
Engineering class about 40 inches downlean clay (CL) 50 percent, clayey sand (SC) 26 percent and fat clay (CH) 16 percent
Average clay content about 40 inches down29 percent
Bedrock mapped within 60 inchesNone mapped
Seasonal water table within 60 inches4 percent of the area
Flood prone soils6 percent of the area
High corrosion risk for uncoated steel12 percent of the area

Bedrock is not mapped in the top five feet of Goliad, which does not rule out rock deeper down. Seasonal water table soils occur in 4 percent of the mapped area, while flood prone soils account for 6 percent; those spots call for attention to pits and channel depth. High steel corrosion risk is mapped on 12 percent of the area, so the line owner should consider casing and tracer wire materials. The USDA geology map names the Quaternary Cemented Pebbly Loam Decomposition Residuum and the Miocene Goliad Formation. Pebbles in the residuum can affect steering.

How do we drill Goliad sandy clay loam?

Goliad’s sandy clay loam and clay at about 40 inches call for a bore plan that manages sticky cuttings. We adjust the drilling sequence to the mapped ground and the route beside local streets or the San Antonio River.

  1. We plan around Goliad’s mapped sandy clay loam, using a staged reaming sequence when the clay begins to cling to the cutting tools.
  2. Where Weesatche clay is sticky, we manage drilling fluid and cuttings, then prepare the pipe so pullback can follow the final ream.
  3. At a route near the San Antonio River, we check the channel crossing plan and pit locations before setting the bore path.
  4. On a path along San Patricio Street, we locate and expose marked utilities, then track depth and pitch as the bore advances.
Drilling fluid returns at the entry as the Vermeer D24x40 S3 drills a 385 foot sandstone rock bore in Guthrie, Oklahoma
Drilling fluid coming back to the entry pit as our Vermeer D24x40 drills a 385 foot bore in Guthrie, Oklahoma.

Which roads, tracks or creeks can a Goliad bore cross near San Patricio Street?

US 183, US 77 Alternate, US 59 and Texas State Highway 239 run inside Goliad’s limits. A bore near US 183 or US 59 needs its route checked against the highway right of way and pavement. San Patricio Street is the longest named street in the city at 1.72 miles, followed by Jefferson Street at 1.68 miles and Pearl Street at 1.41 miles. Those street lengths help identify a route, but the exact address and crossing point determine the bore plan.

CrossingTypeMapped extentWho has a say
US 183US highway2 roadway miles insideState highway office
US 77 AlternateUS highway1.7 roadway miles insideState highway office
US 59US highway1.4 roadway miles insideState highway office
Texas State Highway 239State highway1.6 roadway miles insideState highway office
US 77Highway nearbyRuns along or touches the city limitsState highway office
Texas State Highway 183Highway nearby0.6 miles outsideState highway office
San Antonio RiverStream0.39 channel miles insideChecked for Corps of Engineers jurisdiction
Rattle Snake CreekStream nearbyAlong the boundaryChecked for Corps of Engineers jurisdiction
Manahuilla CreekStream nearby0.5 miles outsideChecked for Corps of Engineers jurisdiction
Hensley LakeLake or pond14 acres, nearbyChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

No railroad is mapped inside Goliad or within one mile outside its limits, and no street and rail crossing is mapped in the city. The San Antonio River runs 0.39 channel miles through Goliad, but no street crossing of a named stream is mapped there. Hensley Lake is outside the city limits and has 14 acres. A proposed river route still needs its own depth and jurisdiction review.

Who approves a Goliad bore under US 183?

For a bore in the US 183 right of way, the utility owner files the TxDOT utility permit through RULIS, not the drilling contractor. We prepare the bore plan and profile for that filing, and the TxDOT Corpus Christi District reviews it. Electric and communication lines need 60 inches of cover below the lowest crossed grade, or 48 inches when running along the right of way. Water lines need 60 inches at crossings and 36 inches along it; pressurized sewer crossings need 60 inches. TxDOT requires boring or tunneling beneath existing highway pavement, and rural crossings extend beneath all travel lanes. A San Antonio River route is checked for Army Corps jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Whose lines are already buried near the City of Goliad water system?

The City of Goliad public water system uses groundwater wells and reports 1,024 service connections serving 1,700 people. For a route near San Patricio Street, we hydrovac expose marked utilities before drilling close to them because paint gives position, not depth. Electric service reporting in Goliad County includes AEP Texas Central, Guadalupe Valley Electric Cooperative, Karnes Electric Cooperative, San Patricio Electric Cooperative and Victoria Electric Cooperative. The line owner for the address must be confirmed before planning an electric conduit bore.

Line ownerWhat it isSourceSize
City of GoliadPublic water systemGroundwater wells1,024 connections, 1,700 people served
AEP Texas Central, Guadalupe Valley Electric Cooperative, Karnes Electric Cooperative, San Patricio Electric Cooperative and Victoria Electric CooperativeElectric utilities reporting service in Goliad CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

We treat the survey’s 1972 median housing year for Goliad as context while assessing underground conditions separately in Goliad County. We plan underground work separately from Goliad County’s housing estimates: 32 percent of homes built before 1960, 65 percent from 1960 to 1999 and 3 percent in 2000 or later. A replacement route along Jefferson Street may meet older buried lines, while a newer service can have a different path. We hydrovac pothole marked utilities on the bore path before the drill approaches them.

Yellow polyethylene gas pipe pulled through a directional bore beside a commercial building
Yellow polyethylene gas pipe pulled through a directional bore beside a commercial building.

How far is Goliad from Quail Creek and our Yukon yard?

Goliad is the county seat of Goliad County and covers 1.57 square miles at an elevation of 200 feet. For requests on Pearl Street, we use ZIP code 77963, which serves Goliad, to keep job location details clear. Quail Creek is 20.0 miles east, Nordheim is 22.0 miles northwest and Yorktown is 22.6 miles north. Victoria, the nearest larger city, is 26.9 miles northeast. From our Yukon, Oklahoma yard, Goliad is 525 road miles and a 10.1 hour drive, which is part of planning crew and equipment mobilization for a job near US 183.

Places near Goliad

What kinds of bores come up in Goliad near Jefferson Street?

  • Water service: A connection near the City of Goliad system may need a route planned around existing groundwater well lines and nearby utilities.
  • Highway crossing: A bore under US 183 needs a TxDOT permit path and a plan that stays beneath the roadway pavement.
  • Street crossing: A route beneath Pearl Street can keep the pavement uncut while pits remain off the traveled surface.
  • Creek crossing: A proposed San Antonio River bore needs a channel depth plan and a jurisdiction check during project planning.
  • Fiber conduit: A run along Jefferson Street can use a bore route to pass beneath pavement and avoid an open trench across the street.
  • Utility replacement: Work near Fannin Street may call for hydrovac potholes to verify marked lines before the drill approaches them.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What do you need to quote a Goliad bore near Fannin Street?

Send an address or map pin first; a point near Fannin Street is different from one beside the San Antonio River or US 183. For a Goliad crossing near US 59, send us what will go in the ground, the pipe or conduit size, and footage. A sketch or plans help us see the route, pits and crossings before we build the bore plan.

Ground, crossings and logistics each shape a Goliad bore. We consider the sticky Weesatche clay, pipe size, bore length, and any utilities that need exposing. A route under US 183 brings highway pavement and permit details into the plan, while a San Antonio River crossing adds channel depth and jurisdiction checks. Concrete, pit work, excavator time and sand backfill can also affect the scope. Mobilization is part of the estimate because Goliad is 525 road miles from Yukon.

Questions people ask about boring in Goliad

Does Trinity Boring Solutions take directional boring jobs in Goliad County, and how are crews assigned?

Yes. We take directional boring work in Goliad County and staff it with our own crews or crews from partner drilling contractors we have vetted. Goliad is 525 road miles from our Yukon yard, so crew and equipment mobilization is part of planning a job near US 183. You deal with Trinity through the bore log.

Can a line be bored beneath the San Antonio River in Goliad?

A bore can be planned for a route beneath the San Antonio River, subject to site conditions and the required crossing review. The river runs 0.39 channel miles in Goliad, so the bore plan needs to account for channel depth. We check for U.S. Army Corps of Engineers jurisdiction during planning.

As we plan boring in Goliad County, who runs Goliad’s public water system, and where does its water come from?

The City of Goliad runs the public water system, which uses groundwater wells. Public records list 1,024 service connections serving 1,700 people. For a bore near San Patricio Street, the water line route still needs to be located and exposed before drilling near it.

Which electric companies report service in Goliad County, and who confirms conduit details?

AEP Texas Central, Guadalupe Valley Electric Cooperative, Karnes Electric Cooperative, San Patricio Electric Cooperative and Victoria Electric Cooperative report electric service in Goliad County. The line owner for a specific US 183 address needs to be confirmed before a conduit bore, including the conduit specifications and route.

Does the city control Pearl Street in Goliad, and can a bore avoid cutting it?

Goliad is an incorporated city, so the city itself controls Pearl Street. Directional boring can pass below street pavement without cutting across the road, with entry and exit pits placed in suitable ground. The exact Pearl Street route and existing utilities determine whether that approach fits.

What does Goliad housing age mean for replacing lines near Jefferson Street?

Goliad’s median housing year is 1972, and the American Community Survey estimates 32 percent of homes were built before 1960. A replacement bore near Jefferson Street may encounter older buried services, but housing age does not identify their location. Along Jefferson Street, we expose marked utilities before drilling near them to protect the planned bore path.

What bore sizes and lengths can Trinity handle for a Goliad job near Fannin Street?

For a route near Fannin Street, we handle lines from 3/4 inch service lines up to 48 inch casing, with bore lengths from 10 feet to 5,000 feet. The route, material, soil and crossings determine the appropriate setup, so the address and plans help define the scope.

How much notice does Texas811 need for a Goliad bore near San Patricio Street?

For a bore near San Patricio Street, request locates at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before work. For a planned San Antonio River crossing, we make a new request if the start slips more than 14 days past the original notice. Worn or moved marks need refreshing through Texas811 before work continues.

What affects the cost of a directional bore in Goliad near US 183?

The scope near US 183 depends on bore length and size, Weesatche soil conditions, utilities to expose, and pavement or concrete crossings. A San Antonio River route can add channel planning, while pit work and excavator time affect the work plan. Mobilization also matters because Goliad is 525 road miles from Yukon.

Where the Goliad facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Goliad

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Goliad, Texas

Type the address of your job in Goliad. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Goliad

All counties: Texas county list.