Redfield Texas Directional Boring: Nacogdoches Soil, Toliver Branch and US 59
Quick Answer: The top five feet around Redfield are mapped mainly as fine sandy loam above clay and sandy clay loam at about 40 inches. We take directional boring, also called horizontal directional drilling (HDD), beneath routes such as US 59 and near Toliver Branch without open cutting those surfaces. The Yukon yard is 388 road miles from Redfield, where North Street is one of the mapped local streets. Clay mapped at 40 inches can stick to a reamer, so we plan fluid and reaming around it.
Redfield bores at a glance
- Unincorporated community in Nacogdoches County, Texas. Population 392 (2020 Census count).
- Road distance from our Yukon, Oklahoma main office: 388 miles, about 7.6 hours of driving.
- Ground: Nacogdoches soil is mapped on 39 percent of the area, with clay about 40 inches down.
- Rock: bedrock is mapped within 60 inches on 11 percent of the area.
- Highways inside the boundary: US 59, US 59 Business and US 259. State permit office: TxDOT Lufkin District.
- Railroad track inside the boundary: none mapped.
- Named streams inside the boundary: Toliver Branch.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Who does directional boring in Redfield near Toliver Branch?
Trinity Boring Solutions takes directional boring work in Redfield, Nacogdoches County, where the Census Bureau counted 392 people in 2020. The top five feet are mapped mainly as fine sandy loam, with clay and sandy clay loam farther down. We install water, sewer, gas, electric conduit and fiber on routes near Toliver Branch and streets such as North Street, with the bore path set for the specific job.
Our main office is in Yukon, Oklahoma, and Redfield work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our longest bore was roughly 4,100 feet of 48 inch pipe under the Arkansas River in Tulsa. Next to that, a typical Redfield job may be a shorter service or conduit bore near North Street, planned around the mapped clay and sandy soils.

What does the soil survey show beneath Redfield near Nacogdoches soil?
The USDA soil survey maps Nacogdoches soil across 39 percent of Redfield, with Ruston at 19 percent and Lilbert at 14 percent. Fine sandy loam is the leading surface texture, mapped over 51 percent of the area; loamy fine sand accounts for 18 percent and clay loam for 16 percent. At about 40 inches, clay is mapped under 48 percent and sandy clay loam under 43 percent. These are mapped patterns, not test borings, so the route still needs to be planned for the actual ground.
| USDA soil survey, inside the Redfield mapped community boundary | What is mapped |
|---|---|
| Soil series mapped | Nacogdoches 39 percent, Ruston 19 percent, Lilbert 14 percent, Trawick 11 percent and Hannahatchee 7 percent |
| Texture at the surface | fine sandy loam 51 percent, loamy fine sand 18 percent and clay loam 16 percent |
| Texture about 40 inches down | clay 48 percent, sandy clay loam 43 percent and loamy fine sand 4 percent |
| Engineering class about 40 inches down | fat clay (CH) 48 percent, lean clay (CL) 31 percent and clayey sand (SC) 14 percent |
| Average clay content about 40 inches down | 37 percent |
| Bedrock mapped within 60 inches | 11 percent of the area (0 percent hard rock, 11 percent weathered rock) |
| Seasonal water table within 60 inches | 0 percent of the area |
| Flood prone soils | 7 percent of the area |
| High corrosion risk for uncoated steel | 51 percent of the area |
The survey maps bedrock within 60 inches across 11 percent of Redfield and within 40 inches across 3 percent; the mapped bedrock is weathered, and hard bedrock is not mapped in the top five feet. No seasonal water table is mapped within 60 inches, while flood prone soils cover 7 percent. For Redfield boring, we treat the mapped high steel corrosion risk across 51 percent as a reason to discuss casing and tracer wire materials with the line owner. The geologic map names Sparta Sand of Bartonian age, including sandstone, siltstone and claystone; a soft rock contact can slow a bore or affect steering.
How do we drill through Redfield clay?
Redfield’s mapped clay at about 40 inches can hold a hole open but may cling to the reamer. We adjust fluid and reaming to the soil shown along each route, including streets such as Koonce Road.
- Clay care: With clay mapped under 48 percent of Redfield at about 40 inches, we use fluid suited to sticky ground and ream in stages.
- Keep the hole stable: Redfield also has fine sandy loam at the surface, so we prepare the pipe before the last ream to limit the time an open hole sits.
- Track the route: Near North Street, we follow the drill head from the surface and log depth and pitch as the bore advances.
- Protect marked lines: Before a bore near Cumberland Drive approaches a marked utility, we expose it with hydrovac because paint shows position, not depth.

What is in the way of a new line in Redfield near Union Pacific?
US 59, US 59 Business and US 259 run inside Redfield’s mapped community boundary, and Loop 224 is 1.2 miles outside it. A bore near those highways needs a route and depth that fit the road crossing. North Street is the longest named street at 1.72 miles; Koonce Road and Cumberland Drive each run 0.84 miles. A bore can pass beneath pavement instead of cutting across it, with the layout matched to the street and the proposed line.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| US 59 | US highway | 5.9 roadway miles inside | State highway office |
| US 59 Business | US highway | 1.7 roadway miles inside | State highway office |
| US 259 | US highway | 1.1 roadway miles inside | State highway office |
| Loop 224 | Highway nearby | 1.2 miles outside | State highway office |
| Union Pacific | Railroad nearby | 0.1 miles outside | The railroad |
| Toliver Branch | Stream | 1.14 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Bonita Creek | Stream nearby | 0.2 miles outside | Checked for Corps of Engineers jurisdiction |
| West Fork Lanana Creek | Stream nearby | 0.8 miles outside | Checked for Corps of Engineers jurisdiction |
| Banita Creek | Stream nearby | 0.8 miles outside | Checked for Corps of Engineers jurisdiction |
| Byu la Nana | Stream nearby | 0.9 miles outside | Checked for Corps of Engineers jurisdiction |
No railroad is mapped inside Redfield, but Union Pacific track is 0.1 miles outside the mapped community boundary; no street and rail crossing is mapped inside. A planned track crossing still needs an agreement from Union Pacific, with crossing conditions set by the railroad. Toliver Branch runs 1.14 channel miles in Redfield, and two mapped street crossings intersect named streams. Bonita Creek is 0.2 miles outside the boundary. In Redfield, we plan crossings knowing no lakes or ponds are mapped within one mile.
Whose permission does a Redfield bore need in Nacogdoches County?
Redfield is unincorporated, so there is no city government to approve street work; county or state authority applies according to the road. A bore in the right of way of US 59, US 59 Business or US 259 needs a TxDOT utility permit reviewed by the TxDOT Lufkin District. For electric and communication lines, TxDOT calls for at least 60 inches of cover below the lowest point of a highway crossing and 48 inches along the right of way; water and pressurized sewer have their own cover depths. The utility owner files through RULIS, and we prepare the bore plan and profile for its application. A Union Pacific track crossing needs the railroad’s agreement. Toliver Branch is checked for U.S. Army Corps of Engineers jurisdiction during planning.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
What is already in the ground in Redfield, Nacogdoches County?
EPA drinking water records do not tie water systems to towns, so they do not identify the provider for a Redfield address. The water provider for the specific address has to be confirmed with Nacogdoches County or the local water district before a bore is planned. Utilities reporting electric service in the county include Oncor Electric Delivery Company, Cherokee County Electric Cooperative Association, Deep East Texas Electric Cooperative and Rusk County Electric Cooperative. We confirm the line owner for the address before planning an electric conduit bore, then use hydrovac potholing to expose marked lines along the path.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| Oncor Electric Delivery Company, Cherokee County Electric Cooperative Association, Deep East Texas Electric Cooperative and Rusk County Electric Cooperative | Electric utilities reporting service in Nacogdoches County | EIA Form 861 | Confirm the line owner by address |
The American Community Survey 2019 to 2023 five year estimates put Redfield’s median housing year at 1991; 25 percent of housing was built before 1960, 56 percent from 1960 to 1999 and 19 percent in 2000 or later. That mix can mean either replacement work or a new service, including along Cumberland Drive. Before a drill approaches a marked line, we pothole it; locate paint shows position, not depth.

What is near Redfield and Appleby?
Redfield is in Nacogdoches County, at elevation 487 feet, and covers 1.58 square miles. For Redfield work, we use ZIP codes 75965 and 75964 to confirm the service location before planning underground routes. Appleby is 4.2 miles northeast, while Nacogdoches is 4.7 miles south and is both the county seat and nearest larger city. Cushing is 13.9 miles northwest, and Garrison is 14.2 miles northeast. From the Yukon yard, the drive to Redfield is 388 road miles and 7.6 hours. That distance is part of planning a bore near Toliver Branch or US 59.
Places near Redfield
- Directional boring in Appleby: 4.2 miles northeast
- Directional boring in Nacogdoches: 4.7 miles south
- Directional boring in Cushing: 13.9 miles northwest
- Directional boring in Garrison: 14.2 miles northeast
- Directional boring in Mount Enterprise: 16.1 miles north
What would we bore near North Street in Redfield?
- Highway crossing: A bore beneath US 59 needs a route and cover that meet the TxDOT permit for that highway right of way.
- Street service: A water or sewer line near North Street can pass under the pavement, with the bore length matched to the service route.
- Fiber conduit: A conduit run near Cumberland Drive needs marked utilities exposed before drilling close to them.
- Creek crossing: A route near Toliver Branch needs channel conditions considered and jurisdiction checked during planning.
- Rail crossing: If a Redfield job reaches Union Pacific track outside the mapped boundary, the crossing plan needs the railroad’s agreement.
- Replacement line: A bore near Koonce Road can replace an older buried line without open cutting the street.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
How do I get a quote for Redfield work near Koonee Road?
For a Redfield quote, send the address or map pin, what is going in the ground, the pipe or conduit size and the footage; a sketch or plans help us place the route near Koonee Road. Those details show where the bore starts and ends, what it carries and what crossings may shape the plan.
The trip from Yukon is 388 road miles, so mobilization is one part of a Redfield job near Koonee Road. The Nacogdoches soil survey also matters: clay at about 40 inches may call for staged reaming, while mapped weathered bedrock can slow progress. Price also reflects bore length, pipe or conduit size, utilities to expose, pavement, Toliver Branch or other drainage crossings, pits and excavator time. When Redfield work is high profile or an emergency, we allow for scope changes as conditions and requirements develop.
Questions people ask about boring in Redfield
Does Trinity take directional boring jobs in Redfield and Nacogdoches County?
Yes, we take directional boring work in Redfield and across Texas. Our crews and vetted partner contractors handle the field work, while customers deal with Trinity from the first call through the bore log. For a route near Toliver Branch, we plan around the mapped stream and the specific line path.
Who controls Cumberland Drive in Redfield, and does it have to be cut?
Redfield has no city government, so county or state authority handles street matters depending on the road. A bore along Cumberland Drive can pass beneath pavement rather than cutting the street, subject to the applicable road authority’s approval. The route and crossing method depend on the proposed line.
Could older buried lines near Koonce Road need replacement bores in Redfield?
They could. The American Community Survey 2019 to 2023 estimates put Redfield’s median housing year at 1991, with 25 percent of housing built before 1960. That age mix can bring replacement work as well as new services near Koonce Road. Before drilling near marked lines in Redfield, we expose them to help protect existing underground utilities.
Does Nacogdoches soil in Redfield create a steel corrosion concern?
The USDA soil survey maps high steel corrosion risk across 51 percent of Redfield, so the line owner should consider casing and tracer wire materials. HDPE is not subject to soil corrosion. Near North Street, the selected pipe and any coating should fit the specific line and ground conditions.
What ground would a bore pass through in Redfield near Nacogdoches soil?
The USDA soil survey maps fine sandy loam across 51 percent of Redfield at the surface. At about 40 inches, clay is mapped under 48 percent and sandy clay loam under 43 percent. These are survey patterns, not test borings; a route near Toliver Branch still needs to account for the ground found along its path.
Is rock mapped within five feet of the surface in Redfield?
Weathered bedrock is mapped within 60 inches across 11 percent of Redfield, and within 40 inches across 3 percent. Hard bedrock is not mapped in the top five feet, which does not rule out deeper rock. The Sparta Sand geologic unit includes sandstone, so local conditions near US 59 may affect drilling time.
What bore sizes and lengths can Trinity handle near Koonee Road in Redfield?
Across Redfield, we handle lines from 3/4 inch service lines up to 48 inch casing, with bore lengths from 10 feet to 5,000 feet. A run near Koonee Road is sized to its route, ground and crossings. The proposed line, dimensions and footage help us choose the drilling plan.
How far ahead should I request a locate for a Redfield bore near North Street?
For excavation near North Street, Texas law requires a Texas811 locate request at least 48 hours before work starts, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before the start. If the start slips more than 14 days past the notice, make a new request. If marks are worn or moved on Redfield work, we have them refreshed through Texas811 before work continues.
What affects the cost of a directional bore near US 59 in Redfield?
The job details determine the price for a Redfield bore near US 59. Length, pipe or conduit size, the clay and weathered bedrock, utility exposures, pavement, drainage crossings, pits and excavator time all affect the work. Mobilization also reflects the 388 road miles from Yukon, and high profile or emergency work can add planning demands.
Where the Redfield facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Redfield
- U.S. Census Bureau, TIGER/Line 2024: Redfield boundary, roads, rail lines and streams
- U.S. Census Bureau, 2020 Census: Redfield population count
- U.S. Census Bureau, American Community Survey 2019 to 2023: Redfield housing units and year built
- Macrostrat geologic map compilation: map units under Redfield
- U.S. Department of Transportation, North American Rail Network: track owners in Nacogdoches County
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Nacogdoches County
- U.S. Geological Survey, Elevation Point Query Service: Redfield elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Redfield
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Redfield
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Redfield, Texas
Type the address of your job in Redfield. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Redfield
Same county: Chireno. All counties: Texas county list.
