Mount Enterprise Texas Directional Boring: Redsprings Soil, Gatlin Branch and US 259
Quick Answer: Mount Enterprise is a small incorporated city in Rusk County, so streets such as Railroad Street belong to the city. We install utilities with directional boring, also called horizontal directional drilling (HDD), including routes beneath Gatlin Branch. Mount Enterprise is 372 road miles from our Yukon, Oklahoma main office, and US 259 is one local route to consider for mobilization. Redsprings soil is common here, with clay loam below the surface that can cling to tooling and pipe.
Mount Enterprise bores at a glance
- Incorporated city in Rusk County, Texas. Population 512 (Census Bureau 2024 estimate).
- Road distance from our Yukon, Oklahoma main office: 372 miles, about 7.3 hours of driving.
- Ground: Redsprings soil is mapped on 50 percent of the area, with clay loam about 40 inches down.
- Rock: bedrock is mapped within 60 inches on 65 percent of the area.
- Highways inside the boundary: US 259, US 84, FM 3055 and Texas State Highway 315. State permit office: TxDOT Tyler District.
- Railroad track inside the boundary: none mapped.
- Named streams inside the boundary: Gatlin Branch, Wooten Creek, Dry Creek and Green Neal Branch.
- Public water: Mt Enterprise Water Supply Corporation, groundwater wells.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Who does directional boring near Railroad Street in Mount Enterprise?
Trinity Boring Solutions takes directional boring work in Mount Enterprise, an incorporated city in Rusk County where Railroad Street and other city streets can carry utility routes. As a small city, Mount Enterprise owns its public streets. For utility planning along Railroad Street, we use the Census Bureau Vintage 2024 estimate of 512 as Mount Enterprise’s population. Water, sewer, gas, electric conduit and fiber lines can run beneath local streets or connect properties along US 259.
Our main office is in Yukon, Oklahoma, and Mount Enterprise work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. We are a family business started in 1965, with directional boring work dating to 1982; the range from 3/4 inch service lines to 48 inch casing suits utility routes along Railroad Street, with bore lengths from 10 feet to 5,000 feet.

What kind of ground does Redsprings soil mean for Mount Enterprise?
The USDA soil survey maps Redsprings across 50 percent of Mount Enterprise, including Redsprings gravelly fine sandy loam on 45 percent of the mapped area. At about 40 inches below the surface, clay loam is mapped under 68 percent of the area, and heavy clay under 64 percent. Sandy clay loam accounts for 16 percent and clay for 12 percent at that depth. Redsprings and Ulto are mapped soil patterns, not test borings, so we verify ground conditions before boring. Sticky clay can build on a reamer and grip pipe, so a bore near Gatlin Branch needs a fluid and reaming plan suited to the actual route.
| USDA soil survey, inside the Mount Enterprise city limits | What is mapped |
|---|---|
| Soil series mapped | Redsprings 50 percent, Ulto 15 percent, Attoyac 11 percent, Sawlit 7 percent and Laneville 7 percent |
| Texture at the surface | gravelly fine sandy loam 50 percent, fine sandy loam 30 percent and loam 15 percent |
| Texture about 40 inches down | clay loam 68 percent, sandy clay loam 16 percent and clay 12 percent |
| Engineering class about 40 inches down | fat clay (CH) 53 percent, lean clay (CL) 35 percent and clayey sand (SC) 12 percent |
| Average clay content about 40 inches down | 34 percent |
| Bedrock mapped within 60 inches | 65 percent of the area (0 percent hard rock, 65 percent weathered rock) |
| Seasonal water table within 60 inches | 19 percent of the area |
| Flood prone soils | 11 percent of the area |
| High corrosion risk for uncoated steel | 19 percent of the area |
The USDA soil survey maps weathered bedrock within 60 inches across 65 percent of Mount Enterprise, with a typical depth of 47 inches; that material can slow the bit compared with soil. A seasonal water table is mapped within 60 inches on 19 percent of the area, and flood prone soils cover 11 percent, so pits and creek approaches need attention to wet ground. High steel corrosion risk is mapped on 19 percent. The Reklaw Formation, an Eocene unit of sandstone and clay, is mapped here; the line owner should consider casing and tracer wire materials for the route.
How do crews handle clay loam in Mount Enterprise?
For a Mount Enterprise bore through clay loam, we adjust the fluid and reaming plan to the ground rather than treating the USDA map as a site test. Redsprings soil and weathered bedrock both matter to the route.
- Where Redsprings clay loam is present, we use a fluid mix suited to sticky ground and ream in stages so the tooling does not carry excess clay.
- For a route through the mapped gravelly fine sandy loam, we keep the hole supported as it opens and have the pipe ready before the final ream.
- Near Gatlin Branch, we plan for the mapped seasonal water table and flood prone soils, using manageable pits and pumping if water enters them.
- If a bore meets the mapped weathered bedrock of the Reklaw Formation, we slow the advance as needed and check the drill head’s depth and pitch.

Which roads, tracks or creeks affect a Mount Enterprise bore near Gatlin Branch?
A Mount Enterprise bore may cross US 259, US 84, FM 3055 or Texas State Highway 315, all mapped within the city. Railroad Street is the longest named street at 4.95 miles, followed by 3rd Street at 2.05 miles and Rusk Street at 1.29 miles. A route beneath one of these roads can avoid cutting pavement, but the road owner and right of way determine the permit path. US 259 also affects planning for utility routes that approach or follow its corridor.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| US 259 | US highway | 4.9 roadway miles inside | State highway office |
| US 84 | US highway | 1.4 roadway miles inside | State highway office |
| FM 3055 | State highway | 0.4 roadway miles inside | State highway office |
| Texas State Highway 315 | State highway | 0.3 roadway miles inside | State highway office |
| Gatlin Branch | Stream | 1.64 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Wooten Creek | Stream | 0.78 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Dry Creek | Stream | 0.37 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Green Neal Branch | Stream | 0.17 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Byu Loco | Stream | 0.05 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Cemetery Branch | Stream nearby | 0.3 miles outside | Checked for Corps of Engineers jurisdiction |
| Wallace Branch | Stream nearby | 0.3 miles outside | Checked for Corps of Engineers jurisdiction |
| Talley Branch | Stream nearby | 0.6 miles outside | Checked for Corps of Engineers jurisdiction |
No railroad is mapped inside Mount Enterprise or within one mile outside its limits, and none of the mapped street and rail crossings is identified here. The streams are a more direct crossing issue: Gatlin Branch runs 1.64 channel miles in the city, Wooten Creek 0.78 and Dry Creek 0.37. Nine mapped street crossings of named streams make the channel and bank locations relevant to bore depth and setup. Along Gatlin Branch, we plan the boring route knowing no lakes or ponds are mapped within one mile.
Does TxDOT Tyler District approve a US 259 bore in Mount Enterprise?
US 259 is a state highway, so work in its right of way goes through the Texas Department of Transportation and the TxDOT Tyler District. The utility that owns the line submits the application in TxDOT’s online RULIS system; we prepare the bore plan and profile and work under the utility owner’s permit. Existing highway pavement is bored or tunneled beneath, and a crossing needs the applicable cover depth in the permit. Railroad Street and other city streets are city owned. A Gatlin Branch crossing is checked during planning for U.S. Army Corps of Engineers jurisdiction.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Who owns the utility lines in Mount Enterprise and Rusk County?
Mt Enterprise Water Supply Corporation is the public water system listed for Mount Enterprise; its groundwater wells serve 2,205 people through 735 service connections. For electric work, Oncor Electric Delivery Company, Southwestern Electric Power, Cherokee County Electric Cooperative Association, Deep East Texas Electric Cooperative, Rusk County Electric Cooperative and Upshur Rural Electric Cooperative report service in Rusk County. We confirm the line owner for the address before laying out a conduit bore near US 84, since countywide reporting does not identify the provider at every property.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| Mt Enterprise Water Supply Corporation | Public water system | Groundwater wells | 735 connections, 2,205 people served |
| Oncor Electric Delivery Company, Southwestern Electric Power, Cherokee County Electric Cooperative Association, Deep East Texas Electric Cooperative, Rusk County Electric Cooperative and Upshur Rural Electric Cooperative | Electric utilities reporting service in Rusk County | EIA Form 861 | Confirm the line owner by address |
The American Community Survey 2019 to 2023 five year estimates put Mount Enterprise’s median housing year at 1961; 48 percent of homes were built before 1960, 46 percent from 1960 to 1999 and 6 percent in 2000 or later. That mix can mean replacing older buried lines as well as adding newer services along 3rd Street. Before drilling near any marked utility, we use hydrovac potholing to expose it; paint shows position, not depth. A marked line beneath Rusk Street is a local example of where that check matters.

What is near Mount Enterprise, including Garrison?
Mount Enterprise is in Rusk County, at an elevation of 451 feet, and covers 1.48 square miles. For service planning along 3rd Street, we use ZIP code 75681, which serves Mount Enterprise. Cushing is 11.6 miles southwest, Garrison is 12.6 miles southeast and Appleby is 14.1 miles south. Henderson, the county seat and nearest larger city, is 18.2 miles north. The Yukon yard is 372 road miles away, a 7.3 hour drive, so mobilization is part of planning for work near US 259 or the Gatlin Branch crossings.
Places near Mount Enterprise
- Directional boring in Cushing: 11.6 miles southwest
- Directional boring in Garrison: 12.6 miles southeast
- Directional boring in Appleby: 14.1 miles south
- Directional boring in Redfield: 16.1 miles south
- Directional boring in Timpson: 16.8 miles east
- Directional boring in Henderson: 18.2 miles north
What kinds of bores come up near Railroad Street in Mount Enterprise?
- Highway crossing: A utility route beneath US 259 uses a bore or tunnel under existing pavement, with the utility owner handling the right of way permit.
- Water service: A connection near Mt Enterprise Water Supply Corporation lines needs a route that accounts for the groundwater system and existing services.
- Fiber route: Conduit along Railroad Street can pass beneath the road surface, with marked utilities exposed before the drill approaches them.
- Creek crossing: A bore at Gatlin Branch can pass beneath the channel and banks, with the crossing checked for federal jurisdiction during planning.
- Street replacement: A sewer or water line near Rusk Street can be installed without cutting the street, subject to the route and city coordination.
- Electric conduit: A route near US 84 starts with confirming the line owner, since several utilities report service across Rusk County.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What drives the price of a Mount Enterprise bore near 1st Street?
Start with an address or map pin, because the exact position on 1st Street or near Gatlin Branch changes the route and crossing count. For a US 84 crossing, we need to know what goes underground, the pipe or conduit size, and the footage. A sketch or plans help us see pavement, access and marked utilities before we shape the bore plan.
The route and scope set the price. Mount Enterprise is 372 road miles from Yukon, so mobilization matters; Redsprings soil, clay loam or weathered bedrock can change drilling time. Crossings of US 259, Gatlin Branch or marked utilities affect planning and exposure work. Concrete or pavement, entry and exit pits, excavator time and sand backfill also affect the job. High profile or emergency work can add demands to the schedule.
Questions people ask about boring in Mount Enterprise
Does Trinity take directional boring work in Mount Enterprise and Rusk County?
Yes. We take directional boring work in Mount Enterprise and across Texas, with the Yukon main office coordinating the job. Our own crews and satellite yards run by vetted partner drilling contractors can staff the work. You deal with Trinity from the first call through the bore log, whether the crew is working near Railroad Street or elsewhere in Rusk County.
Can a line be bored beneath Gatlin Branch in Mount Enterprise?
A bore beneath Gatlin Branch can be planned, with the route and channel conditions checked first. The stream runs 1.64 channel miles inside Mount Enterprise, so the entry, exit and depth need to suit the crossing. When planning a crossing at Wooten Creek, we check whether the route falls under US Army Corps of Engineers jurisdiction.
Who runs Mount Enterprise’s water system near 1st Street, and where is its source?
Mt Enterprise Water Supply Corporation is the listed public water system, and its source is groundwater wells. With 2,205 people served through 735 service connections, we plan Mount Enterprise bores to avoid disrupting public water service. For a bore near a water line on 3rd Street, the existing route and the exact line location need to be confirmed before drilling.
Which electric company serves Mount Enterprise in Rusk County, and who confirms conduit specs?
Several utilities report electric service in Rusk County: Oncor Electric Delivery Company, Southwestern Electric Power, Cherokee County Electric Cooperative Association, Deep East Texas Electric Cooperative, Rusk County Electric Cooperative and Upshur Rural Electric Cooperative. We confirm the line owner for the specific Mount Enterprise address before planning conduit near US 259, then coordinate conduit specifications with that owner.
Does Mount Enterprise or Rusk County control Rusk Street, and must it be cut?
Rusk Street is a city street in incorporated Mount Enterprise, so it belongs to the city, not Rusk County. A directional bore can pass beneath its pavement without an open cut. The route still needs to account for other marked utilities and any city street requirements that apply to the work.
How old are buried lines near 3rd Street in Mount Enterprise, and what does that mean for replacement bores?
The American Community Survey 2019 to 2023 estimates give Mount Enterprise a median housing year of 1961, with 48 percent of homes built before 1960. Older streets such as 3rd Street may have existing utilities to locate before a replacement route is set. We expose marked lines before drilling near them, because surface paint does not show depth.
Does Trinity cover Cushing and rural sites outside Mount Enterprise?
Yes. We take work around Mount Enterprise, including nearby Cushing, which is 11.6 miles southwest, and rural sites outside the city limits. Routes near Garrison, 12.6 miles southeast, can also be discussed. The address or map pin helps us assess access, distance from Yukon and the planned line.
How much 811 notice does a Mount Enterprise bore near Railroad Street need?
Paint near Railroad Street marks a line’s position, not its depth. Texas law requires a Texas811 locate request at least 48 hours before excavation starts, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before it. If the start slips more than 14 days past the original notice, make a new request; marks that wear off or move must be refreshed through Texas811 before work continues.
What affects the cost of a directional bore near US 259 in Mount Enterprise?
The job details determine the price, not one single measure. For a Mount Enterprise route, the 372 road miles from Yukon affect mobilization, while Redsprings clay or weathered bedrock can affect drilling time. US 259 or Gatlin Branch crossings, marked utilities, pavement, pits, excavator time, sand backfill and emergency scheduling can also change the scope.
Where the Mount Enterprise facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Mount Enterprise
- U.S. Census Bureau, TIGER/Line 2024: Mount Enterprise boundary, roads, rail lines and streams
- U.S. Census Bureau, Vintage 2024 population estimates: Mount Enterprise
- U.S. Census Bureau, American Community Survey 2019 to 2023: Mount Enterprise housing units and year built
- Macrostrat geologic map compilation: map units under Mount Enterprise
- U.S. EPA Safe Drinking Water Information System: public water systems serving Mount Enterprise
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Rusk County
- U.S. Geological Survey, Elevation Point Query Service: Mount Enterprise elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Mount Enterprise
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Mount Enterprise
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Mount Enterprise, Texas
Type the address of your job in Mount Enterprise. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Mount Enterprise
Same county: Kilgore · Lake Cherokee · Overton · Tatum · New London · Reklaw · Easton. All counties: Texas county list.
