Buna Texas Directional Boring: Kirbyville Loam, Nance Branch and BNSF Railway
Quick Answer: We do directional boring, also called horizontal directional drilling (HDD), for routes crossing Buna roads such as Old Bessmay Road without opening the pavement. Buna is 478 road miles from our Yukon, Oklahoma office, so we plan crew mobilization around the route and its crossings. Kirbyville soil is common here, and loam is mapped at about 40 inches, where wet ground can affect the bore. Nance Branch and local utilities also shape the route plan.
Buna bores at a glance
- Unincorporated community in Jasper County, Texas. Population 2,137 (2020 Census count).
- Road distance from our Yukon, Oklahoma main office: 478 miles, about 9.9 hours of driving.
- Ground: Kirbyville soil is mapped on 52 percent of the area, with loam about 40 inches down.
- Rock: no bedrock is mapped in the top 60 inches.
- Highways inside the boundary: US 96, Texas State Highway 62, FM 1004 and FM 253. State permit office: TxDOT Beaumont District.
- Railroad track inside the boundary: BNSF Railway, Sabine River and Northern Railroad and Timber Rock Railroad, with 11 mapped street and rail crossings.
- Named streams inside the boundary: Nance Branch, Long Branch, Cypress Creek and Gum Slough.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Who handles directional boring near Nance Branch in Buna?
Buna is 478 road miles from our Yukon yard, and we staff work with our own crews or vetted partner crews. The Census Bureau counted 2,137 people here in the 2020 Census; it does not publish yearly estimates for this unincorporated place. Along Old Bessmay Road or US 96, we install water, sewer, gas, electric conduit and fiber by directional boring when the route suits the site.
Our main office is in Yukon, Oklahoma, and Buna work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our family business began in 1965, and since 1982 we have done directional boring, experience we bring to planning work in Buna. Four decades of drilling helps us plan for Buna’s mapped loam and clay, where wet ground and sticky cuttings can affect the bore.

What does the soil survey show for Buna and Kirbyville soil?
The USDA soil survey maps Kirbyville soil across 52% of Buna and Waller soil across 31%. Kirbyville fine sandy loam is mapped on 27% of the area, while Kirbyville Niwana complex covers 25%. About 40 inches below the surface, the survey maps loam across 84% of the area and sandy clay loam across 8%. The mapped soil classification at that depth is mostly CL, at 92%; sandy classifications account for 5%. These are mapped patterns for planning a crossing in Buna, not test borings. The clay can hold a hole open but may stick to the reamer and grip pipe.
| USDA soil survey, inside the Buna mapped community boundary | What is mapped |
|---|---|
| Soil series mapped | Kirbyville 52 percent, Waller 31 percent, Otanya 8 percent and Hatliff 5 percent |
| Texture at the surface | very fine sandy loam 33 percent, silt loam 31 percent and fine sandy loam 27 percent |
| Texture about 40 inches down | loam 84 percent, sandy clay loam 8 percent and fine sandy loam 5 percent |
| Engineering class about 40 inches down | lean clay (CL) 92 percent and silty clayey sand (SC SM) 5 percent |
| Average clay content about 40 inches down | 23 percent |
| Bedrock mapped within 60 inches | None mapped |
| Seasonal water table within 60 inches | 92 percent of the area |
| Flood prone soils | 6 percent of the area |
| High corrosion risk for uncoated steel | 84 percent of the area |
Bedrock is not mapped within the top five feet, which does not rule out deeper rock. Seasonal water tables are mapped within 60 inches across 92% of the area and within 40 inches across 84%, so pits near Buna roads may need pumping. Flood prone soils cover 6%. High steel corrosion risk is mapped across 84%, a reason for the line owner to consider casing and tracer wire materials; HDPE avoids that steel concern. The geologic map unit is Delta silt and clay of Pleistocene age, so soft, compressible ground is part of the planning picture.
How do we drill Buna’s loam and Kirbyville soil?
The USDA maps loam at about 40 inches in much of Buna, with clay rich ground also common. We match the drilling fluid and reaming sequence to the route, then keep the pipe ready for the pull.
- Where Kirbyville soil is clay rich, we use a thinner drilling fluid and ream in stages to limit sticky buildup, then pull the pipe while the hole is ready.
- Because seasonal water is mapped within 40 inches across 84% of Buna, we keep pits small and pump water as needed, especially near Nance Branch.
- On loam and silt loam routes, we control fluid pressure beneath pavement so soft ground does not wash out or weaken steering near Old Bessmay Road.
- Before the drill approaches marked utilities on Main Street, we expose them with hydrovac potholing, then track the head from the surface and log depth and pitch.

What does a bore have to cross near Old Bessmay Road in Buna?
US 96 has 6.3 mapped roadway miles inside Buna’s community boundary. Texas State Highway 62 has 2.0 miles, FM 1004 has 1.2 miles and FM 253 has 0.4 miles. TxDOT routes need a planned bore beneath existing pavement rather than an open trench unless the district engineer gives written approval. Old Bessmay Road is the longest named street at 2.33 miles inside the community. Main Street runs 2.02 miles, and Lewis Road runs 1.07 miles, so the route and access points matter when laying out pits.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| US 96 | US highway | 6.3 roadway miles inside | State highway office |
| Texas State Highway 62 | State highway | 2 roadway miles inside | State highway office |
| FM 1004 | State highway | 1.2 roadway miles inside | State highway office |
| FM 253 | State highway | 0.4 roadway miles inside | State highway office |
| BNSF Railway | Railroad | 5.66 track miles inside | The railroad |
| Sabine River and Northern Railroad | Railroad | 1.68 track miles inside | The railroad |
| Timber Rock Railroad | Railroad | 0.24 track miles inside | The railroad |
| Nance Branch | Stream | 0.9 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Long Branch | Stream | 0.8 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Cypress Creek | Stream | 0.67 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Gum Slough | Stream | 0.05 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Strawther Branch | Stream nearby | 0.2 miles outside | Checked for Corps of Engineers jurisdiction |
| Red Bank Creek | Stream nearby | 0.9 miles outside | Checked for Corps of Engineers jurisdiction |
BNSF Railway has 5.66 track miles inside Buna, while Sabine River and Northern Railroad has 1.68 and Timber Rock Railroad has 0.24. Public mapping shows 11 street and rail crossings in the community. Nance Branch runs 0.9 channel miles, Long Branch 0.8 and Cypress Creek 0.67; four mapped street crossings cross named streams. A creek route needs depth planning beneath the channel, and its jurisdiction is checked during planning.
Who approves a bore in Buna and Jasper County?
Buna is an unincorporated community, so Jasper County handles its local streets rather than a city government. For work in the right of way of US 96, Texas State Highway 62, FM 1004 or FM 253, the utility owner applies for a TxDOT utility permit through RULIS; the TxDOT Beaumont District reviews it. TxDOT cover requirements set the depth under those highways, including 60 inches for electric and communication lines at crossings, with the permit able to set another depth. A BNSF Railway route needs that railroad’s crossing agreement. Nance Branch crossings are checked for U.S. Army Corps of Engineers jurisdiction during planning.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Whose lines are already buried in Jasper County near Buna?
The provider serving a specific Buna address has to be confirmed with Jasper County or the local water district before a bore is planned; the available records do not identify a provider for this community. Electric utilities reporting service in Jasper County are Entergy Texas, Deep East Texas Electric Cooperative, Jasper-Newton Electric Cooperative and Sam Houston Electric Cooperative. Before planning conduit along Lewis Road or another route, we confirm the line owner for that address. Hydrovac potholing lets us expose marked lines before drilling near them.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| Entergy Texas, Deep East Texas Electric Cooperative, Jasper-Newton Electric Cooperative and Sam Houston Electric Cooperative | Electric utilities reporting service in Jasper County | EIA Form 861 | Confirm the line owner by address |
Buna’s median housing year is 1995 in the American Community Survey 2019 to 2023 five year estimates, a context for planning underground work. It estimates 11% of homes were built before 1960, 46% from 1960 to 1999 and 43% in 2000 or later. That mix can mean a Main Street project involves either replacement of an older line or a newer service connection; the address and plans tell us which. We pothole marked utilities on the bore path before drilling near them because surface marks do not show depth.

How far is Buna from Silsbee and our Yukon office?
Buna is an unincorporated community in Jasper County, with 5.99 square miles of mapped land and an elevation of 81 feet. Its ZIP code is 77612. Evadale is 9.7 miles southwest, Silsbee is 14.5 miles southwest, Deweyville is 14.9 miles southeast and Kirbyville is 15.3 miles north. Jasper, the county seat, is 33.2 miles north; Silsbee is the nearest larger city listed. The Yukon yard is 478 road miles away, a 9.9 hour drive, so distance is part of planning mobilization for a Buna bore.
Places near Buna
- Directional boring in Evadale: 9.7 miles southwest
- Directional boring in Silsbee: 14.5 miles southwest
- Directional boring in Deweyville: 14.9 miles southeast
- Directional boring in Kirbyville: 15.3 miles north
- Directional boring in Mauriceville: 15.6 miles south
Which jobs call for a bore near Main Street in Buna?
- Highway crossing: A bore beneath US 96 keeps the roadway surface intact while the utility route passes under the highway right of way.
- Street service: A water or sewer line along Lewis Road can be bored between pits instead of cutting across the pavement.
- Creek crossing: A route beneath Nance Branch is planned to pass below the channel, with the crossing checked for federal jurisdiction.
- Rail crossing: A bore beneath BNSF Railway needs the railroad’s agreement and a route plan that fits its crossing conditions.
- Fiber conduit: A conduit run along Main Street can avoid open cuts across the street and nearby driveways.
- Electric conduit: Before a conduit bore near Old Bessmay Road, we confirm the electric line owner and expose marked utilities along the route.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What do you need to quote a Buna bore near BNSF Railway?
For a quote near BNSF Railway or Main Street, send the address or map pin, what will go underground, the pipe or conduit size and the footage. A sketch or plans help us see the route, access and crossings. If the route follows US 96, include the highway location so we can account for the TxDOT right of way.
We set the price from the ground, crossings and logistics. Kirbyville loam and clay affect drilling and reaming; the seasonal water table can add pit pumping. A route near BNSF Railway or US 96 brings crossing and permit details into the plan. Length, pipe size, marked utilities, pavement, creek crossings, pits and excavator time also matter. At 478 road miles from Yukon, mobilization is part of the Buna job scope.
Questions people ask about boring in Buna
Does Trinity take directional boring work in Jasper County near Buna?
Yes. We take directional boring work in Buna and across Texas, with our own crews and partner drilling contractors we have vetted. The customer works with Trinity from the first call through the bore log, whichever crew is on site. For a route near Nance Branch, the scope and access help determine the crew plan.
Who looks after Lewis Road in Buna, and can a bore avoid cutting it?
Buna has no city government because it is an unincorporated community, so Jasper County is responsible for local streets such as Lewis Road. Directional boring can pass a line below the road without cutting the pavement. The route still needs utility locating and suitable pit locations on each side.
Do Buna’s home ages near Main Street affect replacement bores?
They can affect what the project needs, but home age alone does not establish the age or location of a buried line. The American Community Survey estimates a 1995 median housing year for Buna. A Main Street project may replace an older line or add a service, so we check the route and expose marked utilities before drilling.
Will water or flood prone ground affect bore pits near Nance Branch in Buna?
It can. The USDA soil survey maps seasonal water tables within 40 inches across 84% of Buna, and flood prone soils across 6%. Near Nance Branch, we plan pit placement and pumping for wet ground and plan the crossing depth beneath the channel.
Can Kirbyville soil in Buna corrode steel, and what pipe should I use?
The survey maps high steel corrosion risk across 84% of Buna, so the line owner should consider casing and tracer wire materials. In Buna, HDPE is not affected by soil corrosion, a material property we consider when planning underground boring. The owner selects any coating for steel, and the route and service requirements determine what pipe or casing is appropriate near Kirbyville soil.
What ground does a bore pass through in Buna’s Kirbyville soil?
The USDA soil survey maps Kirbyville soil across 52% of Buna. At about 40 inches below the surface, loam is mapped across 84% of the area, with a mostly CL classification. These are survey patterns, not test borings. Clay can hold the hole open but may stick to the reamer and grip pipe.
How much notice does Texas811 need for a Buna bore near Old Bessmay Road?
The locate request must reach Texas811 at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before work. If a Buna start slips more than 14 days past the original notice, we require a new request. For an Old Bessmay Road route, worn or moved marks must be refreshed through Texas811 before work continues.
Does Buna’s distance from Yukon change a job near Silsbee?
Buna is 478 road miles and a 9.9 hour drive from our Yukon, Oklahoma office. That distance can affect mobilization planning for a job near Silsbee, which is 14.5 miles southwest of Buna. The route, crew schedule, equipment and crossing scope all help shape the plan.
What affects the price of directional boring in Buna near US 96?
The job’s length and pipe size matter, along with Kirbyville clay and loam, utility crossings, pavement, creek crossings, pits and excavator time. Work in the US 96 right of way also needs the utility owner’s TxDOT permit. Mobilization from Yukon is another job factor because Buna is 478 road miles away.
Where the Buna facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Buna
- U.S. Census Bureau, TIGER/Line 2024: Buna boundary, roads, rail lines and streams
- U.S. Census Bureau, 2020 Census: Buna population count
- U.S. Census Bureau, American Community Survey 2019 to 2023: Buna housing units and year built
- Macrostrat geologic map compilation: map units under Buna
- U.S. Department of Transportation, North American Rail Network: track owners in Jasper County
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Jasper County
- U.S. Geological Survey, Elevation Point Query Service: Buna elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Buna
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Buna
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Buna, Texas
Type the address of your job in Buna. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Buna
Same county: Jasper · Sam Rayburn · Browndell. All counties: Texas county list.
