Seven Oaks Texas Directional Boring: Leggett Fine Sandy Loam, US 59, Mud Creek
Quick Answer: Entergy Texas and Sam Houston Electric Cooperative report electric service in Polk County, while the water provider for a Seven Oaks address needs confirmation before a bore along US 59. Trinity Boring Solutions takes directional boring, also called horizontal directional drilling (HDD), for routes near US 59, Mud Creek and local streets. Seven Oaks is 423 road miles from our Yukon, Oklahoma main office, so a Carrington Cemetery Road job affects mobilization. Leggett soil covers 62 percent of mapped ground, and sandy clay loam below can cling to a reamer.
Seven Oaks bores at a glance
- Incorporated city in Polk County, Texas. Population 75 (Census Bureau 2024 estimate).
- Road distance from our Yukon, Oklahoma main office: 423 miles, about 8.5 hours of driving.
- Ground: Leggett soil is mapped on 62 percent of the area, with sandy clay loam about 40 inches down.
- Rock: bedrock is mapped within 60 inches on 1 percent of the area.
- Highways inside the boundary: US 59. State permit office: TxDOT Lufkin District.
- Railroad track inside the boundary: Union Pacific.
- Named streams inside the boundary: Mud Creek, Long King Creek and Willis Creek.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Who can I call for directional boring near US 59 in Seven Oaks?
Trinity Boring Solutions takes directional boring work in Seven Oaks, where the water provider needs address level confirmation and Entergy Texas and Sam Houston Electric Cooperative report electric service in Polk County. The Census Bureau Vintage 2024 estimate puts the city population at 75. We install water, sewer, gas, electric conduit and fiber on routes along Carrington Cemetery Road, Albany or US 59.
Our main office is in Yukon, Oklahoma, and Seven Oaks work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our family business began in 1965, and we have provided directional boring since 1982. Our range, from 3/4 inch service lines to 48 inch casing, fits scopes from a small Albany service to a larger US 59 crossing.

What is Leggett soil like to bore in Seven Oaks?
Leggett soil is the dominant mapped series in Seven Oaks, covering 62 percent of the city in the USDA soil survey. The survey maps sandy clay loam at about 40 inches below the surface across 64 percent of the area, with fine sandy loam across 27 percent and clay across 10 percent. Average clay content at that depth is 29 percent. Those mapped patterns point to a bore that can hold shape but may leave sticky material on the reamer.
| USDA soil survey, inside the Seven Oaks city limits | What is mapped |
|---|---|
| Soil series mapped | Leggett 62 percent, Hatliff 27 percent and Woodville 5 percent |
| Texture at the surface | fine sandy loam 68 percent, loam 27 percent and clay 3 percent |
| Texture about 40 inches down | sandy clay loam 64 percent, fine sandy loam 27 percent and clay 10 percent |
| Engineering class about 40 inches down | lean clay (CL) 63 percent, silty clayey sand (SC SM) 27 percent and fat clay (CH) 10 percent |
| Average clay content about 40 inches down | 29 percent |
| Bedrock mapped within 60 inches | 1 percent of the area (0 percent hard rock, 1 percent weathered rock) |
| Seasonal water table within 60 inches | 70 percent of the area |
| Flood prone soils | 29 percent of the area |
| High corrosion risk for uncoated steel | 72 percent of the area |
The USDA soil survey maps typical bedrock depth at 54 inches, while bedrock within 60 inches occurs in only 1 percent of the mapped area. Seasonal water tables are mapped within 60 inches across 70 percent, and flood prone soils cover 29 percent, so plan pits for wet ground near Mud Creek. For Seven Oaks underground work, we account for mapped high steel corrosion risk across 72 percent. The Fleming Formation, of Miocene age, includes clay and sandstone, which can change drilling conditions below the mapped soil.
How is a bore run through Seven Oaks sandy clay loam?
In Seven Oaks, the mapped sandy clay loam and Leggett soil call for controlled fluid and staged reaming. We plan the path around the street, nearby utilities and any wet ground by Mud Creek.
- On a Leggett route, we use a fluid plan and staged reaming to manage clay that can build up on the reamer and grip the pipe.
- Where seasonal water tables are mapped near Mud Creek, we keep pits manageable and plan for pumping if groundwater collects.
- Before drilling near marked lines on Albany, we hydrovac pothole each utility on the path because paint does not show its depth.
- We track the drill head from the surface and log depth and pitch as a Seven Oaks bore advances near streets or creek banks.

What does a bore have to cross in Seven Oaks near Union Pacific?
US 59 runs for 5.2 mapped roadway miles inside Seven Oaks, so a crossing there calls for a route and depth plan that fits the highway. Carrington Cemetery Road is the longest named street at 1.2 miles in the city, followed by Albany at 1.13 miles and Jones Road at 0.72 miles. These streets can be considered for water, sewer, electric conduit or fiber routes, with the specific path determining which pavement or access points must be avoided.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| US 59 | US highway | 5.2 roadway miles inside | State highway office |
| Union Pacific | Railroad | 0.66 track miles inside | The railroad |
| Mud Creek | Stream | 1.58 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Long King Creek | Stream | 0.22 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Willis Creek | Stream | 0.13 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Burnett Creek | Stream nearby | 0.6 miles outside | Checked for Corps of Engineers jurisdiction |
The Union Pacific Lufkin Subdivision has 0.66 track miles in Seven Oaks, and none of the mapped street and rail crossings are inside the city. A proposed track route still needs coordination with Union Pacific. Mud Creek runs 1.58 channel miles in the city; Long King Creek and Willis Creek are also mapped here. The city map records four street crossings of named streams, so creek routes need careful placement. We check mapped water features when planning a Seven Oaks boring route; no lakes or ponds appear within one mile.
Who has to sign off on a Seven Oaks bore in Polk County?
Seven Oaks is an incorporated city, so its city streets belong to the city itself; a route on US 59 needs review by TxDOT, not a city street approval alone. Electric and communication lines crossing US 59 need 60 inches of cover below the lowest point of the crossed grade, and lines running along the right of way need 48 inches. The utility owner files the TxDOT utility application in RULIS, with the TxDOT Lufkin District reviewing it. Trinity supplies the bore plan and profile and works under the utility owner’s permit. A crossing of Union Pacific track needs an agreement with the railroad. Mud Creek planning includes checking for U.S. Army Corps of Engineers jurisdiction.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Whose lines are already buried in Polk County near Seven Oaks?
The water provider for a specific Seven Oaks address has to be confirmed with the city, the county or the local water district before a bore is planned. EPA drinking water records do not match a named system to the city. Entergy Texas and Sam Houston Electric Cooperative report electric service in Polk County, but that does not establish which company owns the line at a particular address. Confirm the line owner and conduit specifications before laying out a route along US 59 or Albany.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| Entergy Texas and Sam Houston Electric Cooperative | Electric utilities reporting service in Polk County | EIA Form 861 | Confirm the line owner by address |
The American Community Survey 2019 to 2023 five year estimates put Seven Oaks’ median housing year at 1968; 48 percent of homes were built before 1960, and 23 percent in 2000 or later. An Albany replacement route may need to account for older buried services as well as newer connections. Before the drill approaches any marked utility, we use hydrovac potholing to expose it; paint shows position, not depth.

How far is Seven Oaks from Corrigan and the Yukon yard?
Seven Oaks is in Polk County, at an elevation of 244 feet, and covers 1.4 square miles. Seven Oaks addresses are associated with ZIP codes 77351 and 75960, which we use to identify the job location before planning boring. Corrigan is 10.3 miles north, while Livingston is 10.9 miles southwest and serves as the county seat and nearest larger city. Pleasant Hill is 11.1 miles north. The route from the Yukon, Oklahoma yard is 423 road miles and takes about 8.5 hours to drive, a distance that matters when planning crew and equipment mobilization for a Seven Oaks job.
Places near Seven Oaks
- Directional boring in Corrigan: 10.3 miles north
- Directional boring in Livingston: 10.9 miles southwest
- Directional boring in Pleasant Hill: 11.1 miles north
- Directional boring in Indian Springs: 13.1 miles southeast
- Directional boring in Cedar Point: 13.6 miles west
What kinds of bores come up near Jones Road in Seven Oaks?
- Highway crossing: A US 59 route needs a bore plan that accounts for the highway right of way and required cover.
- Water service: A service near Carrington Cemetery Road starts with confirming the address provider and tracing existing connections.
- Fiber drop: A fiber route along Albany can avoid cutting pavement when entry and exit pits fit the site.
- Creek crossing: A Mud Creek route needs depth planning and a jurisdiction check during project planning.
- Rail crossing: A route involving the Union Pacific Lufkin Subdivision needs an agreement with the railroad that owns the track.
- Street utility: A Jones Road sewer or electric conduit route can be bored between pits instead of opening the street.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
How do I get a quote for a Seven Oaks bore near Carrington Cemetery Road?
A map pin matters near Carrington Cemetery Road because the exact entry and exit points affect the route around pavement, utilities and access. For a Seven Oaks quote, send the address or pin, what will go underground, pipe or conduit size, and footage. A sketch or plans help us assess a route near Albany, Jones Road or Mud Creek.
We set the price from each Seven Oaks job’s details, keeping the scope of the boring work in view. Ground conditions such as Leggett soil, clay or rock affect drilling time and reaming. Crossings and exposures matter too, including US 59, Union Pacific track, pavement and Mud Creek. Length, pipe size, pits, excavator time and sand backfill all shape the scope. Logistics also count: Seven Oaks is 423 road miles from Yukon, and high profile or emergency work can require a different plan.
Questions people ask about boring in Seven Oaks
Does Trinity Boring Solutions take jobs in Seven Oaks, Polk County, and how are crews assigned?
Yes. We take directional boring work in Seven Oaks and staff it with our own crews or crews from satellite yards run by partner drilling contractors we have vetted. The main office is in Yukon, Oklahoma, and Trinity stays responsible from the first call through the bore log, including work near US 59.
Can a line be bored beneath Mud Creek in Seven Oaks?
A bore can be planned beneath Mud Creek when the route, depth and ground conditions support it. The creek is mapped for 1.58 channel miles inside Seven Oaks, and its crossing is checked for U.S. Army Corps of Engineers jurisdiction during planning. Flood prone soils may affect pit placement and the bore profile.
Who owns electric lines in Seven Oaks, Polk County, and who confirms conduit specs?
Entergy Texas and Sam Houston Electric Cooperative report electric service in Polk County, but the owner at a Seven Oaks address must be confirmed before the conduit route is designed. Ask the line owner to confirm conduit specifications for the location, such as along Albany or near US 59.
Who controls Jones Road in Seven Oaks, and does a bore require cutting it?
Jones Road is a city street because Seven Oaks is incorporated. A directional bore can pass beneath the street between pits, leaving pavement uncut when site conditions and the approved route allow. The entry and exit locations still need to be checked for marked utilities and access.
What do the older homes near Albany in Seven Oaks mean for replacement bores?
The American Community Survey 2019 to 2023 five year estimates give Seven Oaks a median housing year of 1968, with 48 percent of homes built before 1960. A replacement line near Albany may need to work around older buried services. Before drilling near marked utilities in Seven Oaks, we expose them to confirm their locations and protect the planned boring work.
Can groundwater or flood prone ground affect bore pits near Mud Creek in Seven Oaks?
Yes. The USDA soil survey maps seasonal water tables within 60 inches across 70 percent of Seven Oaks and flood prone soils across 29 percent. Near Mud Creek, that can mean wet pits or unstable ground, so we account for water management and pit placement in the plan.
Does Trinity cover Corrigan and rural sites outside Seven Oaks?
Yes. Trinity takes work across Texas, including requests around Corrigan and rural sites beyond Seven Oaks. The job location helps determine crew and equipment logistics; Corrigan is 10.3 miles north of the city, while the Yukon yard is 423 road miles away.
How much notice does Texas811 need for work near Carrington Cemetery Road in Seven Oaks?
The locate request for a bore near Carrington Cemetery Road must be made at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before work. If a Seven Oaks start moves more than 14 days past the original notice, we submit a new Texas811 request before work begins. When marks are worn or moved on a Seven Oaks job, we refresh them through Texas811 before continuing work.
What affects the cost of directional boring under US 59 in Seven Oaks?
The price depends on the job scope, not one fixed factor. Length and pipe size matter, along with Leggett soil, rock, utility crossings, pavement and any Mud Creek work. Pits, excavator time and backfill affect the plan too, as does mobilization for a site 423 road miles from Yukon.
Where the Seven Oaks facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Seven Oaks
- U.S. Census Bureau, TIGER/Line 2024: Seven Oaks boundary, roads, rail lines and streams
- U.S. Census Bureau, Vintage 2024 population estimates: Seven Oaks
- U.S. Census Bureau, American Community Survey 2019 to 2023: Seven Oaks housing units and year built
- Macrostrat geologic map compilation: map units under Seven Oaks
- U.S. Department of Transportation, North American Rail Network: track owners in Polk County
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Polk County
- U.S. Geological Survey, Elevation Point Query Service: Seven Oaks elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Seven Oaks
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Seven Oaks
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Seven Oaks, Texas
Type the address of your job in Seven Oaks. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Seven Oaks
Same county: West Livingston · Onalaska · Big Thicket Lake Estates · Goodrich. All counties: Texas county list.
