West Livingston Texas Directional Boring: Vamont Clay, Tempe Creek and US 190
Quick Answer: We take directional boring, also called horizontal directional drilling (HDD), work in West Livingston, where a route may pass beneath US 190 without cutting the pavement. Our Yukon, Oklahoma main office is 431 road miles away, and FM 3126 is one local route a bore may follow. Vamont clay is a key ground condition: sticky cuttings can build on the reamer. Tempe Creek and the mapped community’s other streams also shape crossing plans.
West Livingston bores at a glance
- Unincorporated community in Polk County, Texas. Population 8,156 (2020 Census count).
- Road distance from our Yukon, Oklahoma main office: 431 miles, about 8.5 hours of driving.
- Ground: Vamont soil is mapped on 19 percent of the area, with clay about 40 inches down.
- Rock: no bedrock is mapped in the top 60 inches.
- Highways inside the boundary: US 190, FM 3126, FM 350, FM 1988 and FM 2457. State permit office: TxDOT Lufkin District.
- Railroad track inside the boundary: none mapped.
- Named streams inside the boundary: Tempe Creek, West Tempe Creek, Long King Creek and East Tempe Creek.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Who can I call for directional boring near Union Pacific at West Livingston?
West Livingston is an unincorporated community in Polk County, so county or state authorities handle public streets, and Trinity Boring Solutions takes directional boring work here. The Census Bureau counted 8,156 people in 2020. We install water, sewer, gas, electric conduit and fiber along routes such as FM 3126 or Mangum Road, with the line and crossing plan set for the address.
Our main office is in Yukon, Oklahoma, and West Livingston work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Since 1982, directional boring has been our work; our family business began in 1965. Four decades of boring inform how we handle sticky Vamont clay, including staged reaming and fluid control.

What is Vamont soil like to bore in West Livingston?
West Livingston’s mapped ground includes Vamont clay and other fine textured soils that can make a bore sticky. The USDA soil survey maps Vamont as 19 percent of the area, with Garner clay mapped across 18 percent. At about 40 inches below the surface, clay texture is mapped across 56 percent of the area, while the average clay content at that depth is 45 percent. These are mapped patterns, not test borings, so the route still needs to be assessed at the work site.
| USDA soil survey, inside the West Livingston mapped community boundary | What is mapped |
|---|---|
| Soil series mapped | Vamont 19 percent, Garner 18 percent, Woodville 12 percent, Hatliff 12 percent and Choates 4 percent |
| Texture at the surface | clay 43 percent, fine sandy loam 15 percent and loam 12 percent |
| Texture about 40 inches down | clay 56 percent, fine sandy loam 12 percent and sandy clay loam 9 percent |
| Engineering class about 40 inches down | fat clay (CH) 56 percent, silty clayey sand (SC SM) 12 percent and clayey sand (SC) 7 percent |
| Average clay content about 40 inches down | 45 percent |
| Bedrock mapped within 60 inches | None mapped |
| Seasonal water table within 60 inches | 41 percent of the area |
| Flood prone soils | 15 percent of the area |
| High corrosion risk for uncoated steel | 62 percent of the area |
The USDA soil survey shows no bedrock within 60 inches, which does not rule out rock deeper down. Seasonal water tables are mapped within 60 inches across 41 percent of the area, and flood prone soils across 15 percent. High steel corrosion risk is mapped across 62 percent, so the line owner should consider casing and tracer wire materials; HDPE avoids that soil concern. The geologic map shows Alluvial clay, silt, sand, and gravel, undifferentiated, of Pleistocene age. Wet ground can fill pits, and creek routes need depth planning.
How is a bore run through clay in West Livingston?
For West Livingston’s clay mapped around Vamont and Garner soils, we manage fluid and ream in stages so sticky cuttings do not load the tool or grip the pipe.
- With Vamont clay mapped across 19 percent of West Livingston, we use thinner drilling fluid and staged reaming to manage sticky cuttings.
- Heavy clay can hold pressure, so beneath US 190 we watch fluid returns and control pressure to reduce the chance of lifting pavement.
- Seasonal water tables are mapped within 60 inches across 41 percent of the area; near Tempe Creek, we plan smaller pits and pump if they fill.
- We track the drill head from the surface and log depth and pitch, including on routes that cross Mangum Road or pass marked utilities.

What is in the way of a new line near Tempe Creek in West Livingston?
A West Livingston bore may need to pass beneath US 190, FM 3126, FM 350, FM 1988 or FM 2457, depending on the route. Mangum Road is the longest named street in the mapped community at 4.05 miles; Kate Lowe Road runs 2.89 miles and Live Oak Street runs 1.55 miles. Boring can keep a crossing beneath pavement or a driveway uncut, with entry and exit pits placed in dirt. The exact alignment determines which roads and access points affect the plan.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| US 190 | US highway | 5.4 roadway miles inside | State highway office |
| FM 3126 | State highway | 13.2 roadway miles inside | State highway office |
| FM 350 | State highway | 4.7 roadway miles inside | State highway office |
| FM 1988 | State highway | 4.5 roadway miles inside | State highway office |
| FM 2457 | State highway | 2.8 roadway miles inside | State highway office |
| FM 3277 | State highway | 0.2 roadway miles inside | State highway office |
| US 59 | Highway nearby | Runs along or touches the city limits | State highway office |
| US 59 Business | Highway nearby | 0.3 miles outside | State highway office |
| Texas State Highway 146 | Highway nearby | 1.4 miles outside | State highway office |
| Union Pacific | Railroad nearby | 0.2 miles outside | The railroad |
| Tempe Creek | Stream | 4.52 channel miles inside | Checked for Corps of Engineers jurisdiction |
| West Tempe Creek | Stream | 4.41 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Long King Creek | Stream | 2.71 channel miles inside | Checked for Corps of Engineers jurisdiction |
| East Tempe Creek | Stream | 2.52 channel miles inside | Checked for Corps of Engineers jurisdiction |
No railroad runs inside the mapped community, and no street and rail crossing is mapped there. Union Pacific track lies 0.2 miles outside the boundary, so a route reaching it needs railroad coordination. Tempe Creek runs 4.52 channel miles inside the community, while West Tempe Creek runs 4.41 miles and Long King Creek 2.71 miles. Five street crossings of named streams are mapped. Livingston Reservoir is also inside the community, so a water crossing needs review during planning.
Who approves a bore on Polk County roads near West Livingston?
West Livingston has no city government, so public street authority rests with Polk County or the state, depending on the road. For work in the right of way of US 190, FM 3126 or another state highway, the line owner, not the driller, files through TxDOT’s online RULIS system. We provide the bore plan and profile for that filing, and TxDOT’s Lufkin District reviews it. TxDOT cover rules depend on the line type and crossing: electric and communication lines need 60 inches at a highway crossing, while water lines need 60 inches and pressurized sewer lines need 60 inches.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Which utilities serve addresses in Polk County near West Livingston?
For an address along FM 350 or another West Livingston road, the water provider must be confirmed with the county or local water district before a bore is planned. Available public water records do not identify which provider serves a specific address here. Entergy Texas and Sam Houston Electric Cooperative report electric service in Polk County, but that does not establish which company owns the line at a particular Longhorn Valley Drive property. Confirm the line owner before planning an electric conduit bore.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| Entergy Texas and Sam Houston Electric Cooperative | Electric utilities reporting service in Polk County | EIA Form 861 | Confirm the line owner by address |
The American Community Survey 2019 to 2023 five year estimates put the median year built for West Livingston homes at 1995; 7 percent were built before 1960, and 42 percent in 2000 or later. That mix can mean either replacing older service near Mangum Road or planning new service on a newer property. On a bore path crossing US 190 in West Livingston, we hydrovac pothole every marked utility before drilling near it. On a Mangum Road route, potholing checks a line’s depth because locate paint shows position, not depth.

How far is Cape Royale from West Livingston?
West Livingston is in Polk County, at an elevation of 149 feet, and covers 23.77 square miles within its mapped community boundary. ZIP code 77351 serves the area. Livingston is 4.9 miles east and is the county seat; Cape Royale is 7.3 miles southwest. Goodrich is 7.7 miles southeast, Cedar Point is 7.7 miles northwest, and Onalaska is 10.0 miles northwest. Huntsville is the nearest larger city, 31.8 miles west. The Yukon yard is 431 road miles away, an 8.5 hour drive.
Places near West Livingston
- Directional boring in Livingston: 4.9 miles east
- Directional boring in Cape Royale: 7.3 miles southwest
- Directional boring in Goodrich: 7.7 miles southeast
- Directional boring in Cedar Point: 7.7 miles northwest
- Directional boring in Onalaska: 10 miles northwest
- Directional boring in Huntsville: 31.8 miles west
What boring work comes up near Mangum Road in West Livingston?
- Highway crossing: A bore beneath US 190 keeps the pavement uncut, with the route and cover set for the line type.
- Water service: A new service along Mangum Road needs its address specific water provider confirmed before the route is planned.
- Fiber route: Conduit along FM 3126 can be bored beneath driveways, with marked utilities exposed before drilling near them.
- Creek crossing: A Tempe Creek route needs planned depth below the channel and review for federal waterway jurisdiction.
- Rail crossing: A route toward the Union Pacific track outside the mapped community needs coordination with the railroad.
- Acreage service: A line near Livingston Reservoir needs an alignment that accounts for the property access and any water crossing.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What should I send for a US 190 bore quote in West Livingston?
For a West Livingston quote, start with the address or map pin, such as a property along FM 1988. Tell us what goes underground, such as water or fiber, the pipe or conduit size, and the footage. A sketch or plans help show how the route approaches US 190, Mangum Road or a creek crossing.
Price follows the actual West Livingston route. Ground conditions such as Vamont clay affect drilling and reaming; crossings such as US 190 or Tempe Creek affect the plan and access. Pipe size and bore length matter, as do marked utilities that need exposure, pavement, pits and excavator time. The 431 road miles from Yukon affect mobilization. Creek or drainage work, sand backfill, and high profile or emergency conditions can also change the work involved.
Questions people ask about boring in West Livingston
Does Trinity take directional boring jobs in Polk County at West Livingston, and who staffs them?
Yes. We take directional boring work in West Livingston, including routes along FM 3126, and serve Texas from our Yukon main office. Our own crews and partner drilling contractors we have vetted staff the work. For West Livingston work, we keep you with Trinity from the first call through the bore log, regardless of which crew handles the work.
Does Vamont soil in West Livingston create a corrosion concern, and what pipe can be used?
The USDA soil survey maps high steel corrosion risk across 62 percent of West Livingston, including areas with Vamont soil. The line owner should consider materials for steel casing and tracer wire. On West Livingston bore routes, we use HDPE knowing soil corrosion does not affect it. Material selection belongs with the line owner for the route and its requirements.
What ground should I expect for a bore through Vamont soil in West Livingston?
The USDA soil survey maps Vamont clay across 19 percent of West Livingston. At about 40 inches down, clay is the mapped texture across 56 percent of the area, with an average clay content of 45 percent. These are soil survey patterns rather than test borings, so conditions along a route near FM 350 may vary.
Will a bore in West Livingston hit rock near Tempe Creek?
The soil survey does not map bedrock within 60 inches in West Livingston, but that does not rule out deeper rock. The geologic map shows Pleistocene Alluvial clay, silt, sand, and gravel, undifferentiated. Near Tempe Creek, a site assessment still matters because the mapped unit does not establish conditions at every bore depth.
Who approves a bore under US 190 in West Livingston, and which TxDOT office reviews it?
For work in US 190 right of way, the utility line owner files the permit through TxDOT’s RULIS system. We supply the bore plan and profile for the filing, and the TxDOT Lufkin District reviews it. TxDOT rules set cover by line type, with the permit able to set a different depth.
What does a bore under the Union Pacific track near West Livingston require?
A crossing of the Union Pacific track outside West Livingston’s mapped boundary needs an agreement from the railroad. For West Livingston crossings, we follow the agreement’s casing, depth and flagging conditions. If the line also occupies highway right of way, TxDOT asks for a copy of the railroad agreement.
What bore sizes and lengths can Trinity handle for a job near Longhorn Valley Drive in West Livingston?
For work near Longhorn Valley Drive, we handle lines from 3/4 inch service lines up to 48 inch casing, with bore lengths from 10 feet to 5,000 feet. The route, ground and crossings determine the suitable setup. Send the size and footage so we can assess the scope.
How much notice does Texas811 need for a bore on Mangum Road in West Livingston, and what if marks move?
For a Mangum Road start, count back at least two working days for the Texas811 locate request, excluding Saturdays, Sundays and legal holidays. The request cannot be made earlier than 14 days before excavation. If the start slips more than 14 days past the original notice, make a new request; worn or moved marks need refreshing through Texas811 before work resumes.
What drives directional bore costs beneath US 190 in West Livingston?
The job scope sets the price, including length, pipe or conduit size, ground, crossings and access. Vamont clay can affect drilling and reaming; US 190 may add highway crossing requirements, and nearby Tempe Creek can add water crossing planning. Exposing utilities, pavement, pits, excavator time and the distance from Yukon also affect the work.
Where the West Livingston facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside West Livingston
- U.S. Census Bureau, TIGER/Line 2024: West Livingston boundary, roads, rail lines and streams
- U.S. Census Bureau, 2020 Census: West Livingston population count
- U.S. Census Bureau, American Community Survey 2019 to 2023: West Livingston housing units and year built
- Macrostrat geologic map compilation: map units under West Livingston
- U.S. Department of Transportation, North American Rail Network: track owners in Polk County
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Polk County
- U.S. Geological Survey, Elevation Point Query Service: West Livingston elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to West Livingston
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in West Livingston
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in West Livingston, Texas
Type the address of your job in West Livingston. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for West Livingston
Same county: Corrigan · Indian Springs · Big Thicket Lake Estates · Pleasant Hill · Seven Oaks. All counties: Texas county list.
