trinityboringsolutions.com

Livingston Texas Directional Boring: Woodville Soil, US 59 And Long King Creek

Quick Answer: We do directional boring, also called horizontal directional drilling (HDD), for Livingston projects, including routes that need to pass beneath Union Pacific track. Washington Avenue is the longest named street at 4.03 miles, and 122.6 public road miles lie inside the town limits. Our Yukon, Oklahoma yard is 432 road miles away, a factor for work near US 59. Woodville soil and clay at about 40 inches call for staged reaming and attention to drilling fluid.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Livingston bores at a glance

  • County seat of Polk County, Texas. Population 5,562 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 432 miles, about 8.4 hours of driving.
  • Ground: Woodville soil is mapped on 31 percent of the area, with clay about 40 inches down.
  • Rock: no bedrock is mapped in the top 60 inches.
  • Highways inside the boundary: US 59, US 59 Business, US 190, Texas State Highway 146 and FM 1316. State permit office: TxDOT Lufkin District.
  • Railroad track inside the boundary: Union Pacific, with 17 mapped street and rail crossings.
  • Named streams inside the boundary: Long King Creek and Choates Creek.
  • Public water: City of Livingston, surface water bought from another system.
  • Electric: City of Livingston municipal electric system.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who handles directional boring in Livingston along US 59?

We take directional boring work in Livingston, Polk County, where the Census Bureau Vintage 2024 estimate puts the population at 5,562. Along US 59, US 190 or Washington Avenue, a project may call for water, sewer, gas, electric conduit or fiber installed below the surface. The route and proposed line determine the bore plan, especially where streets or existing utilities cross the path.

Our main office is in Yukon, Oklahoma, and Livingston work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our family business began in 1965, and we have done directional boring since 1982, knowledge we apply when planning Livingston crossings. For Livingston routes near US 59, our equipment range covers 3/4 inch service lines through 48 inch casing, with bore lengths from 10 feet to 5,000 feet.

Ditch Witch directional drill rig with a loaded drill rod rack staged at a commercial jobsite
Our Ditch Witch directional drill with a full rack of drill rod staged at a commercial site. Photos on this page are from our jobs in Oklahoma and Texas.

What is Livingston ground like around Woodville soil?

Livingston ground includes Woodville soil, which the USDA soil survey maps across 31% of the town. At about 40 inches below the surface, clay is mapped across 63% of the area, while sandy clay loam covers 21% and fine sandy loam 15%. Clay makes up 29% of mapped surface texture. These are mapped soil patterns, not test borings, so a route near Long King Creek still needs site specific planning. Sticky clay can gather on a reamer and grip pipe as it swells when wet.

USDA soil survey, inside the Livingston city limitsWhat is mapped
Soil series mappedWoodville 31 percent, Wiergate 28 percent, Hatliff 15 percent, Doucette 7 percent and Choates 6 percent
Texture at the surfacefine sandy loam 31 percent, clay 29 percent and loamy fine sand 21 percent
Texture about 40 inches downclay 63 percent, sandy clay loam 21 percent and fine sandy loam 15 percent
Engineering class about 40 inches downfat clay (CH) 63 percent, clayey sand (SC) 19 percent and silty clayey sand (SC SM) 15 percent
Average clay content about 40 inches down45 percent
Bedrock mapped within 60 inchesNone mapped
Seasonal water table within 60 inches39 percent of the area
Flood prone soils16 percent of the area
High corrosion risk for uncoated steel70 percent of the area

The USDA soil survey maps seasonal water tables within 60 inches across 39% of Livingston and flood prone soils across 16%, so pits near Long King Creek may need water management and a depth plan. High steel corrosion risk is mapped across 70%, a concern for steel casing and tracer wire that the line owner should address. For Livingston boring plans, we treat the top five feet as unmapped for bedrock rather than assuming a shallow rock profile. The map also identifies Massive Clay Decomposition Residuum of Cenozoic age, including clay and sand, which can add sticky ground conditions.

How do crews bore Livingston clay?

For a Livingston route in mapped clay, we plan fluid and reaming around the ground instead of forcing a single large pass. Woodville soil and the clay mapped at about 40 inches guide that approach.

  1. In Livingston clay, we use a thinner drilling fluid with polymer and open the hole in stages, helping limit sticky buildup on the reamer.
  2. Where clay is mapped at about 40 inches, we watch fluid returns closely so pressure does not lift pavement along Washington Avenue.
  3. Near Long King Creek, we plan depth around the channel and manage pits for the seasonal water table mapped across 39% of Livingston.
  4. Before drilling near Houston Avenue, we hydrovac expose each marked utility on the route; a walkover locator tracks the head and logs depth and pitch.
Open bore pit in red Oklahoma dirt with white PVC conduit stub ups and an orange safety barrier
An open bore pit in red Oklahoma dirt with PVC conduit stubbed up and a safety barrier around it.

What might a Livingston bore cross near Union Pacific?

A Livingston bore may need to pass beneath US 59, US 59 Business, US 190 or Texas State Highway 146, with FM 1316, FM 350 and FM 1988 also inside the town limits. Washington Avenue runs 4.03 miles within the limits, Houston Street 3.1 miles and Houston Avenue 2.84 miles. Pan American Drive adds another 2.0 miles. Since the town has 122.6 public road miles, a route plan needs to account for the exact street, driveways and pavement along the proposed path.

CrossingTypeMapped extentWho has a say
US 59US highway16.8 roadway miles insideState highway office
US 59 BusinessUS highway5.8 roadway miles insideState highway office
US 190US highway5.5 roadway miles insideState highway office
Texas State Highway 146State highway3.9 roadway miles insideState highway office
FM 1316State highway1.5 roadway miles insideState highway office
FM 350State highway0.5 roadway miles insideState highway office
FM 1988State highway0.3 roadway miles insideState highway office
Union PacificRailroad4.05 track miles insideThe railroad
Long King CreekStream4.93 channel miles insideChecked for Corps of Engineers jurisdiction
Choates CreekStream3.8 channel miles insideChecked for Corps of Engineers jurisdiction
Crooked CreekStream nearbyAlong the boundaryChecked for Corps of Engineers jurisdiction
Lake ThunderbirdLake or pond7 acres, insideChecked for Corps of Engineers jurisdiction
Folmar LakeLake or pond5 acres, nearbyChecked for Corps of Engineers jurisdiction
Eight Acre LakeLake or pond3 acres, nearbyChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

Union Pacific has 4.05 track miles inside Livingston, on the Union Pacific Lufkin Subdivision, and public records map 17 street and rail crossings in town. Long King Creek runs 4.93 channel miles and Choates Creek 3.8 miles; eight mapped street crossings cross named streams. Lake Thunderbird is within the limits. A proposed creek or lake crossing needs review for U.S. Army Corps of Engineers jurisdiction, and a rail bore needs the railroad owner’s agreement.

Who approves a Livingston bore in Polk County?

For work in Polk County, the approval path depends on whether a bore follows a city street, a state highway, Union Pacific track or a creek. Livingston is incorporated, so its city streets, including Houston Avenue, belong to the city. Work in the right of way of US 59, US 190, Texas State Highway 146 or a farm to market road needs a TxDOT utility permit. The line owner, not the driller, files through RULIS for review by the TxDOT Lufkin District; we provide the bore plan and profile for that filing. TxDOT cover requirements depend on line type and whether it crosses or runs alongside the highway.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Which utilities are in the ground near the City of Livingston?

The City of Livingston owns the public water system, which uses purchased surface water and reports 5,641 service connections serving 15,199 people. Livingston also owns its municipal electric system, with 3,474 customers reported to EIA. Near a proposed route on Washington Avenue, we identify the line owner and planned service before selecting a conduit path, rather than assuming one utility’s facilities serve every address.

Line ownerWhat it isSourceSize
City of LivingstonPublic water systemSurface water bought from another system5,641 connections, 15,199 people served
City of Livingston municipal electric systemCity owned electric systemReports to the U.S. Energy Information Administration3,474 customers reported
Entergy Texas and Sam Houston Electric CooperativeElectric utilities reporting service in Polk CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Livingston’s median housing year at 1976; 18% of homes were built before 1960, 71% from 1960 to 1999 and 11% in 2000 or later. A bore near Houston Avenue could serve a replacement line in an older area or a newer connection. We hydrovac pothole marked utilities on the route before drilling nearby, since paint shows position, not depth.

Exposed underground utility line in a hand dug potholing pit before a directional bore in Oklahoma
An existing utility line exposed in a pothole before a directional bore in Oklahoma.

Do you cover Livingston and Huntsville?

Livingston is the Polk County seat, at an elevation of 183 feet, and its incorporated area covers 8.73 square miles. ZIP code 77351 serves the town. West Livingston is 4.9 miles west, Goodrich 7.0 miles south, Cedar Point 10.5 miles northwest, Seven Oaks 10.9 miles northeast and Indian Springs 11.5 miles east. Huntsville, the nearest larger city, is 36.7 miles west. The Yukon, Oklahoma main office is 432 road miles away, an 8.4 hour drive, which can affect mobilization for work near US 59.

Places near Livingston

Which jobs call for a bore near Livingston’s Washington Avenue?

  • Highway crossing: A route beneath US 59 can keep a proposed water or fiber line below existing pavement instead of cutting across the roadway.
  • Water service: Near the City of Livingston water system, a bore can carry a proposed service beneath a driveway or street along Washington Avenue.
  • Fiber drop: A fiber route along Houston Avenue can pass beneath pavement and marked utilities without opening a continuous trench.
  • Creek crossing: A proposed line below Long King Creek needs a planned depth and a check for U.S. Army Corps of Engineers jurisdiction.
  • Rail crossing: A proposed utility beneath the Union Pacific Lufkin Subdivision needs an agreement from the railroad that owns the track.
  • Street connection: A bore near Pan American Drive can connect a planned service while leaving the street surface uncut.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What should I send for a Livingston quote near Pan American Drive?

For a Livingston quote, send an address or map pin so we can see whether the route is near Pan American Drive, US 59 or Long King Creek. Include what will go underground, the pipe or conduit size and the footage. A sketch or plans help us understand the alignment and the places where the bore may meet pavement, utilities or a creek.

A simple route near Pan American Drive with a clear path and few crossings is easier to plan than a bore through the clay mapped at about 40 inches or beneath Union Pacific track. Length, line size, soil, utilities that must be exposed, pavement, creek crossings and pit or excavator work all affect the scope. Livingston is 432 road miles from Yukon, so mobilization also matters; high profile or emergency work can require a different plan.

Questions people ask about boring in Livingston

Does Trinity take directional boring jobs in Polk County’s Livingston, and who staffs them?

Yes, we take directional boring jobs in Livingston, Polk County, and work with our own crews or vetted drilling contractor partners at satellite yards. Customers work with Trinity from the first call through the bore log, whichever crew is at the site. For a route near US 59, we plan the work around the proposed line and crossings.

What does a Livingston bore beneath Union Pacific track need?

A bore beneath the Union Pacific track in Livingston needs an agreement from the railroad that owns the track. For Livingston crossings, our agreement sets the crossing conditions, including casing, depth and flagging. Public records map 4.05 track miles inside town, so the exact track location and proposed route matter to planning.

Can a Livingston utility line go beneath Long King Creek?

A line may be planned beneath Long King Creek, subject to route conditions and review during planning. The creek runs 4.93 channel miles inside Livingston, and a creek crossing is checked for U.S. Army Corps of Engineers jurisdiction. Flood prone soils mapped in town also make crossing depth and pit placement important.

Who runs Livingston’s public water system, and where does its water come from?

The City of Livingston owns the public water system, and its source is purchased surface water. The system reports 5,641 service connections and 15,199 people served. For a bore near Washington Avenue, the proposed route still needs to account for existing water lines and other marked utilities.

Who owns electric lines in Polk County’s Livingston, and who confirms conduit specs?

The City of Livingston owns the municipal electric system, which reports 3,474 customers to EIA. The line owner should confirm conduit requirements for a proposed bore near Houston Avenue before the route is set. Identifying the specific facilities on the path helps avoid assuming the same equipment serves every address.

Who is responsible for Livingston streets like Houston Avenue, and must we cut one?

Livingston is incorporated, so Houston Avenue and other city streets belong to the city itself. Directional boring can place a line below pavement without cutting the street surface, using work pits on either side of the crossing. The precise route and any right of way requirements need to be checked for the project.

Can I reach Trinity after hours about an urgent Livingston bore near Houston Avenue?

Yes, a person answers Trinity’s phone 24 hours a day, and we provide 24 hour emergency response. If an urgent job involves Houston Avenue, share the location and line details so we can understand the route and the immediate scope before dispatch planning.

How much Texas811 notice does a Livingston bore near Washington Avenue need?

For a bore near Washington Avenue, Texas law requires a locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before it. For Livingston work, if our start moves more than 14 days past the original notice, we make a new request. Have marks refreshed through Texas811 if they wear off or move.

What affects the cost of a Livingston directional bore near US 59?

The scope near US 59 affects the cost, including length, pipe or conduit size, Livingston’s clay, utility crossings, pavement, pits and any creek crossing. A Union Pacific track crossing can add planning needs, and mobilization matters because the Yukon office is 432 road miles away. High profile or emergency work can also change the plan.

Where the Livingston facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Livingston

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Livingston, Texas

Type the address of your job in Livingston. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Livingston

Same county: Onalaska · Corrigan · Big Thicket Lake Estates · Pleasant Hill. All counties: Texas county list.