trinityboringsolutions.com

South Mountain Texas Directional Boring: Eckrant Soil, US 84 and South Greenbriar Creek

Quick Answer: US 84 is the main route through South Mountain, and Trinity Boring Solutions handles directional boring, also called horizontal directional drilling (HDD), for lines planned beneath it. South Greenbriar Creek is another crossing to account for, while our Yukon, Oklahoma main office is 336 road miles away from South Mountain. US 84 access and that creek crossing shape the setup before drilling starts. Eckrant soil is very cobbly silty clay, and mapped bedrock near the surface can slow the bore and call for rock capable tooling.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

South Mountain bores at a glance

  • Incorporated city in Coryell County, Texas. Population 410 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 336 miles, about 6.5 hours of driving.
  • Ground: Eckrant soil is mapped on 50 percent of the area, with bedrock about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 99 percent of the area.
  • Highways inside the boundary: US 84. State permit office: TxDOT Waco District.
  • Railroad track inside the boundary: none mapped.
  • Named streams inside the boundary: South Greenbriar Creek.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who does directional boring near South Greenbriar Creek in South Mountain?

South Mountain is an incorporated town in Coryell County with 410 people, according to the Census Bureau Vintage 2024 estimate. We install water, sewer, gas, electric conduit and fiber, with routes that can run beneath US 84, Barton Lane or South Greenbriar Creek. The line type, route and crossings help determine the bore plan before equipment is set up.

Our main office is in Yukon, Oklahoma, and South Mountain work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our longest bore ran roughly 4,100 feet with 48 inch pipe under the Arkansas River in Tulsa. A South Mountain bore near US 84 is usually a much shorter local crossing. We have been a family business since 1965 and have done directional boring since 1982.

Horizontal directional drill rig set up on an open grass field with support trucks and a vacuum excavation truck
Our horizontal directional drill set up in an open field with the support trucks and the vacuum excavation truck. Photos on this page are from our jobs in Oklahoma and Texas.

What kind of ground does Eckrant soil mean for South Mountain bores?

The USDA soil survey maps Eckrant across 50 percent of South Mountain, including very cobbly silty clay and an Eckrant and rock outcrop complex. Bolar, Oglesby, Real and Denton soils also appear in the town. At about 40 inches below the surface, the survey maps bedrock across 96 percent of the area, while silty clay is the leading listed surface texture at 32 percent. We use Eckrant and Bolar soil mapping around South Mountain to guide planning, not as a substitute for test borings. Cobbles and shallow rock can slow a route and make steering checks important.

USDA soil survey, inside the South Mountain city limitsWhat is mapped
Soil series mappedEckrant 50 percent, Bolar 19 percent, Oglesby 16 percent, Real 11 percent and Denton 3 percent
Texture at the surfacevery cobbly silty clay 32 percent, gravelly clay loam 30 percent and silty clay 19 percent
Texture about 40 inches downbedrock 96 percent and silt loam 3 percent
Engineering class about 40 inches downlean clay (CL) 4 percent
Average clay content about 40 inches down28 percent
Bedrock mapped within 60 inches99 percent of the area (88 percent hard rock, 11 percent weathered rock)
Seasonal water table within 60 inches0 percent of the area
Flood prone soils0 percent of the area
High corrosion risk for uncoated steel66 percent of the area

The USDA soil survey puts typical bedrock depth at 20 inches and maps hard bedrock within 60 inches across 88 percent of South Mountain. The lower part of the Washita Group, a Cretaceous unit, includes limestone and marl, so a bore may need rock capable tooling. Seasonal water tables and flood prone soils are not mapped in the surveyed area. High steel corrosion risk is mapped across 66 percent, so the line owner should address coating choices for steel casing or tracer wire. Along Barton Lane, we use HDPE to avoid soil corrosion concerns in the mapped very cobbly silty clay.

How do crews bore through South Mountain bedrock?

Eckrant soil, cobbles and shallow mapped bedrock can change the drilling pace around South Mountain. We check the route and planned depth, then match the tooling and fluid approach to the ground found along the bore.

  1. Eckrant very cobbly silty clay and mapped rock outcrops can deflect the drill head, so we check depth and pitch as each rod advances.
  2. With bedrock mapped near the surface in South Mountain, we match the bit to the rock and allow for slower progress than in soil.
  3. For a route near South Greenbriar Creek, we plan the bore depth below the channel and check jurisdiction during crossing planning.
  4. Before drilling near marked lines along Barton Lane, we expose them with hydrovac potholing because surface marks do not show burial depth.
Trinity Boring Solutions crew in hard hats at the exit pit with rock tooling on a sandstone bore in Guthrie, OK
Our crew at the exit pit with rock tooling on a sandstone bore in Guthrie, Oklahoma.

Where might a line go under US 84 in South Mountain?

US 84 runs through South Mountain, with 1.6 mapped roadway miles inside town limits. Texas State Highway 36 lies 1.4 miles outside the limits. A route may also cross Barton Lane, which has 1.54 miles in town, or use Old Osage Road with 0.83 miles and Ranier Road with 0.73 miles. Boring can keep those pavement surfaces intact, but the route and access points still need to fit the road corridor and the line depth.

CrossingTypeMapped extentWho has a say
US 84US highway1.6 roadway miles insideState highway office
Texas State Highway 36Highway nearby1.4 miles outsideState highway office
South Greenbriar CreekStream0.2 channel miles insideChecked for Corps of Engineers jurisdiction
Rock CreekStream nearby0.4 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

No railroad is mapped inside South Mountain or within one mile outside its limits, and no street and rail crossings are mapped in town. South Greenbriar Creek runs for 0.2 channel miles inside the limits, with one mapped street crossing of a named stream. Rock Creek lies 0.4 miles outside town. We account for South Greenbriar Creek crossings; no lakes or ponds are mapped within one mile of South Mountain. A creek route needs a channel depth plan, and its jurisdiction is checked during planning.

Who approves a South Mountain bore in Coryell County?

Because South Mountain is incorporated, we treat boring on Old Osage Road as work within the town’s city streets. A bore on US 84 or another state highway right of way needs a TxDOT utility permit. The line owner submits the application through TxDOT’s RULIS system, and the Waco District reviews it; we prepare the bore plan and profile and work under the utility owner’s permit. TxDOT cover rules set a baseline of 60 inches at highway crossings for electric, communication and water lines, and for pressurized sewer. The district can specify a different depth.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Whose buried lines should we check in Coryell County in South Mountain?

The water provider for a specific South Mountain address needs to be confirmed with the city, Coryell County or the local water district before planning a bore. Electric service reporting in Coryell County includes Oncor Electric Delivery Company, Texas New Mexico Power, Hamilton County Electric Cooperative Association, Heart of Texas Electric Cooperative and United Electric Cooperative Service. Those reports do not identify the provider at every address. The owner of the existing line needs to be confirmed before an electric conduit bore is planned along Barton Lane or another route.

Line ownerWhat it isSourceSize
Oncor Electric Delivery Company, Texas-New Mexico Power, Hamilton County Electric Cooperative Association, Heart of Texas Electric Cooperative and United Electric Cooperative ServiceElectric utilities reporting service in Coryell CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

South Mountain’s 1983 median housing year gives us context, but we still plan each underground route around verified site conditions. With 25 percent of homes built before 1960, 60 percent from 1960 to 1999, and 15 percent in 2000 or later, we verify bore routes onsite. That mix can mean a replacement route beside older services or a new connection near newer housing. Before drilling near a marked line on Old Osage Road, we use hydrovac potholing to expose it; paint shows position, not depth.

Yellow polyethylene gas pipe pulled through a directional bore beside a commercial building
Yellow polyethylene gas pipe pulled through a directional bore beside a commercial building.

Do you cover South Mountain and nearby Gatesville?

South Mountain is in Coryell County, at an elevation of 1,036 feet, and covers 1.61 square miles. Its ZIP code is 76528. Gatesville, the county seat and nearest larger city, is 3.9 miles west. Mound is 6.5 miles south, Flat is 9.6 miles south, Oglesby is 10.0 miles east and Mosheim is 14.1 miles north. Our Yukon yard is 336 road miles away, about a 6.5 hour drive. That distance is part of the mobilization plan for work near US 84.

Places near South Mountain

What would we bore near Old Osage Road in South Mountain?

  • Highway crossing: A line beneath US 84 needs a planned bore profile, adequate cover and a route that reaches beyond the travel lanes.
  • Water service: A service near Barton Lane can run beneath pavement instead of opening a trench across the street.
  • Fiber route: A conduit along Old Osage Road can connect properties while the bore avoids cutting its road surface.
  • Creek crossing: A route under South Greenbriar Creek needs a planned channel depth and a jurisdiction check before the crossing.
  • Electric conduit: A bore near Ranier Road starts with identifying the line owner and exposing marked utilities along the path.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

How do I get a South Mountain quote near Barton Lane?

For a South Mountain quote, send the address or map pin, what will go in the ground, the pipe or conduit size and the footage; a sketch or plans help us understand how the route meets Barton Lane or US 84. Mark creek crossings and pavement on the plan. That lets us review access and the likely bore path before discussing the job.

The price follows the South Mountain route and its conditions. A short service bore in workable ground with no difficult crossings is simpler to plan than a route through Eckrant cobbles or shallow bedrock. Length, pipe size, exposed utilities, pavement, creek crossings, pits, excavator time and sand backfill all affect the scope. A crossing beneath US 84 needs its permit plan, and the 336 road miles from Yukon affect mobilization. High profile or emergency work also changes the planning needs.

Questions people ask about boring in South Mountain

Does Trinity take directional boring work in South Mountain, Coryell County, and how is it staffed?

Yes. We take directional boring work in South Mountain, Coryell County, with our own crews and vetted partner contractors working from satellite yards. In Coryell County, we stay involved from the first call through the bore log, regardless of which crew handles the work. A route beneath US 84 or near South Greenbriar Creek is planned for its specific crossings.

Who approves a bore under US 84 in South Mountain, and which state office reviews it?

TxDOT reviews a utility owner’s permit application for work in the US 84 right of way. The utility owner files through RULIS, and the TxDOT Waco District reviews the application. We prepare the bore plan and profile for that filing. The cover depth and bore plan depend on the line type and the crossing conditions in South Mountain.

Can a utility line be bored under South Greenbriar Creek in South Mountain?

A bore can be planned beneath South Greenbriar Creek, which has 0.2 channel miles inside South Mountain. The route needs a depth plan below the channel, and the crossing is checked for federal waterway jurisdiction during planning. The soil survey maps no flood prone soils in town, but the creek itself still shapes the bore route and setup.

Which electric utility serves South Mountain in Coryell County, and who confirms conduit specs?

Several utilities report electric service in Coryell County: Oncor Electric Delivery Company, Texas New Mexico Power, Hamilton County Electric Cooperative Association, Heart of Texas Electric Cooperative and United Electric Cooperative Service. That list does not establish which provider serves a particular South Mountain address. Confirm the line owner and conduit requirements with the utility responsible for the route before planning a bore.

Who controls Ranier Road in South Mountain, and does a bore mean cutting the street?

South Mountain is incorporated, so its city streets, including Ranier Road, belong to the city. A directional bore can pass beneath the roadway without opening a trench through its pavement. The entry and exit pits still need suitable locations, and marked utilities along the planned path must be exposed before drilling near them.

What do South Mountain homes along Old Osage Road tell us about replacement bores?

The American Community Survey 2019 to 2023 five year estimates put the median housing year at 1983, with 25 percent of homes built before 1960. A replacement bore near Old Osage Road may need to work around older buried services, while newer housing can call for new connections. We pothole marked lines to verify their depth before drilling nearby.

How much notice does Texas811 need for a South Mountain bore near Barton Lane, and what about the marks?

For a bore near Barton Lane, Texas law requires a locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before work. For a TxDOT Waco District start, if work slips more than 14 days past the original notice, we submit a new request. Before we continue boring near US 84, we have worn or moved marks refreshed through Texas811.

How far is South Mountain from the Yukon office near Gatesville, and does that affect the work?

South Mountain is 336 road miles from our Yukon, Oklahoma main office, about a 6.5 hour drive. Gatesville is 3.9 miles west of town. The distance from Yukon can affect mobilization planning, while the local route, such as a crossing near US 84, determines the bore setup and scope.

What affects the cost of directional boring in South Mountain under US 84?

The job’s length and pipe size matter, along with the Eckrant soil, shallow mapped bedrock, utilities to expose, pavement, pits and any creek crossing. Work beneath US 84 also needs its permit plan, and mobilization from Yukon matters at 336 road miles. Those site details determine the work involved; there is no single price that fits every route.

Where the South Mountain facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in South Mountain

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in South Mountain, Texas

Type the address of your job in South Mountain. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for South Mountain

Same county: Copperas Cove · Fort Hood · Evant. All counties: Texas county list.