Bulverde Texas Directional Boring: Brackett Soil, US 281 and Cibolo Creek
Quick Answer: Need a line beneath US 281, a road, or Cibolo Creek without opening the surface? Trinity Boring Solutions does directional boring, also called horizontal directional drilling (HDD), for Bulverde crossings like these. Bulverde is 471 road miles from our Yukon, Oklahoma main office, so a bore along Bulverde Road needs mobilization planned with the route. Brackett soil and rock outcrops are common here. With bedrock mapped within 40 inches across 93 percent of the city, the bore may need slower drilling through rock.
Bulverde bores at a glance
- Incorporated city in Comal County, Texas. Population 7,198 (Census Bureau 2024 estimate).
- Road distance from our Yukon, Oklahoma main office: 471 miles, about 9.2 hours of driving.
- Ground: Brackett soil is mapped on 53 percent of the area, with bedrock about 40 inches down.
- Rock: bedrock is mapped within 60 inches on 93 percent of the area.
- Highways inside the boundary: US 281, Texas State Highway 46, FM 1863 and FM 3009. State permit office: TxDOT San Antonio District.
- Railroad track inside the boundary: none mapped.
- Named streams inside the boundary: Cibolo Creek, Indian Creek, Lewis Creek and Hanz Creek.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Which contractor handles directional boring under Cibolo Creek in Bulverde?
Need a line beneath Cibolo Creek or a road without cutting the surface? We take directional boring work in Bulverde, Comal County, where the Census Bureau Vintage 2024 estimate puts the population at 7,198. A water or sewer line can run beneath a local street, while electric conduit or fiber can follow a route near US 281. The path and line owner shape the bore plan.
Our main office is in Yukon, Oklahoma, and Bulverde work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our family business started in 1965, and since 1982 we have done directional boring; Bulverde is 471 road miles from our Yukon main office. Along Bulverde Road, our record of no utility strikes in over 25 years matters because electric service in Comal County is reported by several utilities, and the line owner must be identified for the actual route.

What is Brackett soil like to bore in Bulverde?
The USDA soil survey maps Brackett soil across 53 percent of Bulverde. Brackett and rock outcrop complexes cover much of the city, and paragravelly clay loam and gravelly clay loam are common surface textures. At about 40 inches below the surface, bedrock is mapped across 93 percent of the area. The mapped average clay content at that depth is 39 percent, while no sandy area is mapped there. These are broad soil patterns, not a description of every lot on Circle Oak or every drill path.
| USDA soil survey, inside the Bulverde city limits | What is mapped |
|---|---|
| Soil series mapped | Brackett 53 percent, Real 12 percent, Comfort 9 percent, Bolar 6 percent and Denton 6 percent |
| Texture at the surface | paragravelly clay loam 27 percent, gravelly clay loam 26 percent and gravelly loam 12 percent |
| Texture about 40 inches down | bedrock 93 percent |
| Engineering class about 40 inches down | fat clay (CH) 4 percent and lean clay (CL) 3 percent |
| Average clay content about 40 inches down | 39 percent |
| Bedrock mapped within 60 inches | 93 percent of the area (27 percent hard rock, 66 percent weathered rock) |
| Seasonal water table within 60 inches | 0 percent of the area |
| Flood prone soils | 0 percent of the area |
| High corrosion risk for uncoated steel | 25 percent of the area |
The USDA soil survey maps hard or weathered bedrock within 60 inches across Bulverde, with bedrock typically about 17 inches below the surface. The Glen Rose limestone fossiliferous hydrostratigraphic unit is Albian in age and includes alternating limestone and marl. That mix can mean rock drilling and a slower pace where the bore meets rock. When we plan boring in Bulverde’s Brackett, Real, Comfort, or Bolar soils, seasonal water tables and flood prone soils are not mapped. High steel corrosion risk is mapped in 25 percent of the city, so the line owner should consider casing or tracer wire materials along with the Brackett ground.
How do crews handle bedrock on a Bulverde bore?
On Bulverde routes where Brackett soil gives way to rock, we match the cutting method to the ground and keep the drill path under observation. A Cibolo Creek crossing or a bore near US 281 also needs a route planned around the surface features.
- Where Brackett clay loam is sticky, we use drilling fluid suited to the ground, ream in stages and have the line ready to pull before the hole can grip it.
- When a Bulverde bore reaches Glen Rose limestone, we slow down and choose rock capable tooling; the change from soil to rock can also push the head off line.
- At marked utilities near Circle Oak, hydrovac potholing exposes each line before the drill approaches, since surface marks do not give its depth.
- For a path near Cibolo Creek, we track the drill head from the surface and log its depth and pitch while keeping the creek bank uncut.

What does a bore have to cross in Bulverde near US 281?
US 281 runs 13.7 mapped roadway miles inside Bulverde, with Texas State Highway 46 and FM 1863 also crossing the city. A line beneath one of these highways has to be planned for its right of way and required cover. Bulverde Road is the longest named street at 8.91 miles, followed by Ammann Road at 4.66 miles and Circle Oak at 2.94 miles. Boring can keep pavement and driveways uncut, with entry and exit pits placed in dirt.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| US 281 | US highway | 13.7 roadway miles inside | State highway office |
| Texas State Highway 46 | State highway | 9.5 roadway miles inside | State highway office |
| FM 1863 | State highway | 9.3 roadway miles inside | State highway office |
| FM 3009 | State highway | 0.1 roadway miles inside | State highway office |
| Cibolo Creek | Stream | 3.16 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Indian Creek | Stream | 2.05 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Lewis Creek | Stream | 1.74 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Hanz Creek | Stream | 0.52 channel miles inside | Checked for Corps of Engineers jurisdiction |
| West Fork Dry Comal Creek | Stream | 0.2 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Spotted Deer | Stream | 0.06 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Dripping Springs Creek | Stream nearby | Along the boundary | Checked for Corps of Engineers jurisdiction |
| Kelly Creek | Stream nearby | 0.1 miles outside | Checked for Corps of Engineers jurisdiction |
| Ahern Creek | Stream nearby | 0.1 miles outside | Checked for Corps of Engineers jurisdiction |
| Honey Creek | Stream nearby | 0.2 miles outside | Checked for Corps of Engineers jurisdiction |
No railroad or mapped street and rail crossing is recorded inside Bulverde, so a rail crossing is not part of the mapped local route. Cibolo Creek runs 3.16 channel miles in the city, and 15 mapped street crossings intersect named streams. Indian Creek and Lewis Creek also run through Bulverde. A creek bore needs a planned path beneath the channel, and its crossing is checked for U.S. Army Corps of Engineers jurisdiction during planning. We account for Cibolo Creek separately because no lakes or ponds are mapped within one mile of Bulverde.
Do I need a permit to bore under a Bulverde road in Comal County?
For a bore in Bulverde street limits, the city is responsible for its city streets; Comal County is not the street owner. Work in the right of way of US 281, Texas State Highway 46, FM 1863 or another listed state highway needs a TxDOT utility permit. The utility that owns the line files through TxDOT’s RULIS system, and the TxDOT San Antonio District reviews the application. For a Bulverde state permit filing with the TxDOT San Antonio District, we prepare the bore plan and profile for the utility owner. Highway cover depends on the line type and crossing, including 60 inches for electric and communication lines and water lines beneath a highway.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Who owns the lines serving Bulverde in Comal County?
The public water provider for a specific Bulverde address has to be confirmed with the city, Comal County or the local water district before a bore is planned. Electric service reported in Comal County includes the City of New Braunfels, City of San Antonio, Guadalupe Valley Electric Cooperative and Pedernales Electric Cooperative; that does not establish which one owns a line at a particular address. Before a conduit bore near Bulverde Road, we expose marked water and electric utilities with hydrovac potholing so the planned path accounts for their actual depth.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| City of New Braunfels, City of San Antonio, Guadalupe Valley Electric Cooperative and Pedernales Electric Cooperative | Electric utilities reporting service in Comal County | EIA Form 861 | Confirm the line owner by address |
The American Community Survey 2019 to 2023 five year estimates place Bulverde’s median housing year at 1995, so we assess each underground route separately. The same survey estimates 69 percent of housing was built from 1960 to 1999 and 31 percent in 2000 or later. That mix can mean a replacement bore near Ammann Road as well as a new service. We pothole marked lines on the route before drilling close to them, since locate marks show position, not depth.

Where is Bulverde in relation to Spring Branch?
Bulverde is an incorporated city in Comal County, with an elevation of 1,276 feet and land area of 15.81 square miles. Bulverde’s ZIP codes are 78163 and 78070; we use Bulverde Road and Blanco Road to clarify job locations before planning underground work. Spring Branch is 7.2 miles north, and Timberwood Park is 5.9 miles southwest. New Braunfels, the county seat, is 19.9 miles east. From our Yukon, Oklahoma main office, the road trip to Bulverde is 471 miles and takes 9.2 hours, which is part of planning mobilization for work near US 281 or Cibolo Creek.
Places near Bulverde
- Directional boring in Timberwood Park: 5.9 miles southwest
- Directional boring in Spring Branch: 7.2 miles north
- Directional boring in Fair Oaks Ranch: 12.3 miles west
- Directional boring in Hollywood Park: 12.5 miles south
- Directional boring in Canyon Lake: 12.5 miles northeast
What boring work comes up near Circle Oak in Bulverde?
- Highway crossing: A route beneath US 281 needs a bore plan that accounts for the highway right of way, line type and required cover.
- Water service: A service near Bulverde Road needs the address specific water provider confirmed before the bore route is set.
- Electric conduit: Near Ammann Road, we identify the line owner among the utilities reporting service in Comal County before planning conduit.
- Creek crossing: A bore beneath Cibolo Creek keeps the channel and banks uncut, with the crossing checked for federal jurisdiction during planning.
- Street replacement: A replacement line along Circle Oak can pass beneath pavement by boring, with pits set beyond the part of the route that must stay intact.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What do you need to quote a bore near Bulverde Road in Bulverde?
Start with an address or map pin near Bulverde Road or Cibolo Creek. The exact spot shows whether the route approaches pavement, a creek or a highway right of way. Along Ammann Road, tell us what is going in the ground, the pipe or conduit size, and the footage so we can scope the bore. A sketch or plans help us lay out the proposed bore.
The job details set the price, with ground conditions first: Brackett soil and shallow bedrock can change the tooling and drilling time. Next, we consider crossings and exposures, such as US 281, utilities or Cibolo Creek, plus pavement, pits, backfill and excavator time. Pipe size and bore length also matter. Bulverde is 471 road miles from Yukon, so mobilization is part of the scope, along with any high profile or emergency needs.
Questions people ask about boring in Bulverde
Does Trinity take directional boring jobs in Bulverde and Comal County?
Yes. We take directional boring work in Bulverde, and the job is handled by our own crews or crews working from partner contractor satellite yards we have vetted. From the first call through the bore log, we work with you on a Bulverde project in Comal County. For a route near Cibolo Creek, the site details shape the plan.
Who approves a bore under US 281 in Bulverde, and should we check with the TxDOT San Antonio District for state permit requirements?
TxDOT handles a bore in the US 281 right of way, with review by the TxDOT San Antonio District. The utility that owns the line submits the application in the RULIS system. We prepare the bore plan and profile for that filing, and the permit sets the approved work conditions for the crossing.
Can you bore a line under Cibolo Creek in Bulverde?
A bore can be planned beneath Cibolo Creek without cutting the channel or its banks. The route and ground conditions determine the drilling plan, and the crossing is checked for U.S. Army Corps of Engineers jurisdiction during planning. Cibolo Creek runs 3.16 channel miles inside Bulverde.
Who owns electric lines in Bulverde, Comal County, and who confirms conduit specs?
The owner depends on the address. Utilities reporting electric service in Comal County include the City of New Braunfels, City of San Antonio, Guadalupe Valley Electric Cooperative and Pedernales Electric Cooperative. The line owner should be confirmed before a conduit bore near Bulverde Road, and that owner provides the applicable conduit requirements.
Who is in charge of Circle Oak in Bulverde, and does it have to be cut?
Circle Oak is a city street because Bulverde is incorporated. A bore can pass beneath pavement without open cutting the street, using pits in dirt on either side of the crossing. The route still needs to account for marked utilities and the proposed line depth along Circle Oak.
What do Bulverde homes near Ammann Road mean for replacement bores?
Bulverde’s median housing year is 1995, according to the American Community Survey 2019 to 2023 five year estimates. The age mix can call for replacement bores as well as new services near Ammann Road. We expose marked utilities before drilling nearby so the replacement path can be planned around existing lines.
Does Trinity cover Timberwood Park and rural sites outside Bulverde?
Yes. We take work in Texas beyond Bulverde, including routes near Timberwood Park and rural sites outside city limits. Each address needs its own route and access details. A site 5.9 miles southwest of Bulverde has different ground and crossings to plan for than a bore beside US 281.
How much 811 notice is needed for a Bulverde bore along Bulverde Road?
Texas811 needs a locate request at least 48 hours before excavation starts, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before it. Describe the planned bore path along Bulverde Road. If the start slips more than 14 days past the original notice, request a new ticket; worn or moved marks must be refreshed before work resumes.
What affects the cost of directional boring in Bulverde near US 281, where paragravelly clay loam surface soil can shape bore planning?
For a proposed bore on FM 1863 in Bulverde, we set the price from the job scope. Brackett soil and shallow bedrock can affect tooling and time, while a US 281 crossing adds right of way planning. Bore length, pipe size, exposed utilities, pavement, creek crossings, pits and backfill also matter. Bulverde’s 471 road miles from Yukon make mobilization part of the job scope.
Where the Bulverde facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Bulverde
- U.S. Census Bureau, TIGER/Line 2024: Bulverde boundary, roads, rail lines and streams
- U.S. Census Bureau, Vintage 2024 population estimates: Bulverde
- U.S. Census Bureau, American Community Survey 2019 to 2023: Bulverde housing units and year built
- Macrostrat geologic map compilation: map units under Bulverde
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Comal County
- U.S. Geological Survey, Elevation Point Query Service: Bulverde elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Bulverde
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Bulverde
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Bulverde, Texas
Type the address of your job in Bulverde. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Bulverde
Same county: New Braunfels · Garden Ridge · Schertz. All counties: Texas county list.
