trinityboringsolutions.com

St. Jo Texas Directional Boring: Windthorst Soil, US 82, Elm Fork Trinity River

Quick Answer: Windthorst fine sandy loam can hold a bore line, while Trinity Boring Solutions provides directional boring, also called horizontal directional drilling (HDD), beneath St. Jo streets and US 82. St. Jo is 170 road miles from our Yukon, Oklahoma yard, and planning accounts for FM 677 and the Elm Fork Trinity River. At about 40 inches, sandy clay loam is mapped across 38 percent of the city, and clay can cling to a reamer.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

St. Jo bores at a glance

  • Incorporated city in Montague County, Texas. Population 950 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 170 miles, about 3.4 hours of driving.
  • Ground: Windthorst soil is mapped on 39 percent of the area, with sandy clay loam about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 9 percent of the area.
  • Highways inside the boundary: US 82, FM 677, FM 2382 and FM 67. State permit office: TxDOT Wichita Falls District.
  • Railroad track inside the boundary: none mapped.
  • Named streams inside the boundary: Elm Fork Trinity River.
  • Public water: City of St. Jo, groundwater wells.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Does anyone handle directional boring in St. Jo along Boggess Street?

Windthorst fine sandy loam is common in St. Jo and can hold a bore line; Trinity Boring Solutions takes directional boring jobs across Montague County, where the Census Bureau Vintage 2024 estimate puts St. Jo at 950 residents. Water, sewer, gas, electric conduit and fiber routes can run below Boggess Street or other public roads, subject to the route and existing lines.

Our main office is in Yukon, Oklahoma, and St. Jo work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our longest bore was roughly 4,100 feet of 48 inch pipe under the Arkansas River in Tulsa. That reach comes from a family business started in 1965, with directional boring work dating to 1982; a Boggess Street route is a smaller local scope to plan around.

Aerial view of a bore pit with drill rig and conduit alongside a directional drill rig and conduit on a concrete lot
Our crew at a bore pit beside the directional drill on a conduit job, seen from above. Photos on this page are from our jobs in Oklahoma and Texas.

What is Windthorst soil like to bore in St. Jo?

St. Jo’s mapped Windthorst soil can hold an open bore, though clay in the profile may cling to tooling. The USDA soil survey maps Windthorst across 39 percent of the city and Windthorst fine sandy loam across 35 percent. At about 40 inches below the surface, sandy clay loam covers 38 percent of mapped area, while silty clay covers 31 percent. The survey also maps heavy clay at that depth across 44 percent of St. Jo. These are mapped patterns, not results from a site specific test.

USDA soil survey, inside the St. Jo city limitsWhat is mapped
Soil series mappedWindthorst 39 percent, Branyon 31 percent, Bosque 10 percent, Bolar 5 percent and Waurika 4 percent
Texture at the surfacefine sandy loam 40 percent, silty clay 31 percent and loam 14 percent
Texture about 40 inches downsandy clay loam 38 percent, silty clay 31 percent and loam 10 percent
Engineering class about 40 inches downlean clay (CL) 56 percent and fat clay (CH) 35 percent
Average clay content about 40 inches down40 percent
Bedrock mapped within 60 inches9 percent of the area (8 percent hard rock, 1 percent weathered rock)
Seasonal water table within 60 inches4 percent of the area
Flood prone soils10 percent of the area
High corrosion risk for uncoated steel40 percent of the area

The USDA soil survey maps bedrock within 60 inches across 9 percent of St. Jo, with typical depth listed as 28 inches; rock can slow a bore where encountered. Seasonal water tables are mapped within 60 inches across 4 percent, while flood prone soils cover 10 percent, so pits and routes near the Elm Fork Trinity River need attention to wet ground. With Windthorst among St. Jo’s soil series, we account for high steel corrosion risk mapped across 40 percent when selecting boring materials. The Antlers Sand geologic unit, of Aptian age, includes sand, clay and conglomerate, so the exact route matters. A line owner can consider steel casing and tracer wire materials; HDPE does not have the same steel corrosion exposure.

What does it take to bore sandy clay loam in St. Jo?

For St. Jo’s mapped sandy clay loam and clay, we plan the bore around how the soil holds or grips the hole. Boggess Street and the route’s marked utilities also shape the setup.

  1. In St. Jo’s mapped sandy clay loam, we use drilling fluid and staged reaming to manage a hole that can cling to the tooling as clay builds on the reamer.
  2. Where the St. Jo soil survey maps heavy clay, we watch fluid returns and pressure so drilling near pavement does not lift the surface.
  3. Before a proposed route under Howell Street, we hydrovac pothole each marked utility on the bore path; paint does not show how deep a line sits.
  4. Near the Elm Fork Trinity River, we plan the bore depth and pit setup around mapped flood prone soils and check the crossing for Corps jurisdiction.
Bore pit with a 6 inch PVC sleeve, traffic cones and blue water line flags at NE 24th Street in Oklahoma City
A bore pit with a 6 inch PVC sleeve, traffic cones and blue water line flags at NE 24th Street in Oklahoma City.

What does a bore have to cross in St. Jo near US 82?

A St. Jo bore near US 82 may need to pass beneath a US highway, a state road or a city street without opening the surface. FM 677, FM 2382 and FM 67 are also inside the city limits, while Texas State Highway 59 runs along or touches them. Among named streets, Boggess Street runs 1.27 miles within the city, Williams Street 1.2 miles and Howell Street 1.08 miles. Those routes call for a path planned around pavement, access and marked utilities.

CrossingTypeMapped extentWho has a say
US 82US highway1.1 roadway miles insideState highway office
FM 677State highway1.6 roadway miles insideState highway office
FM 2382State highway0.6 roadway miles insideState highway office
FM 67State highway0.1 roadway miles insideState highway office
Texas State Highway 59Highway nearbyRuns along or touches the city limitsState highway office
Elm Fork Trinity RiverStream1.52 channel miles insideChecked for Corps of Engineers jurisdiction
Buck BranchStream nearby0.1 miles outsideChecked for Corps of Engineers jurisdiction
Mountain CreekStream nearby0.3 miles outsideChecked for Corps of Engineers jurisdiction
Katy LakeLake or pond30 acres, nearbyChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

No railroad is mapped inside St. Jo or within 1 mile outside its limits, and no street and rail crossing is mapped in the city. The Elm Fork Trinity River runs 1.52 channel miles through St. Jo, with four mapped street crossings of named streams in the city. Katy Lake, a 30 acre lake, lies outside the city limits but within 1 mile. A river or creek crossing is checked for federal waterway jurisdiction during planning.

Who has to sign off on a bore in St. Jo and Montague County?

For St. Jo streets, the city is responsible because St. Jo is incorporated; work on US 82, FM 677, FM 2382, FM 67 or Texas State Highway 59 right of way needs a TxDOT utility permit. For electric or communication lines crossing a highway, the required cover is at least 60 inches below the lowest crossed grade, or 48 inches along the right of way. Water lines need 60 inches at a crossing and 36 inches along the right of way; pressurized sewer needs 60 inches at a crossing. The utility owner files in TxDOT’s RULIS system for the Wichita Falls District. We prepare the bore plan and profile for that filing. The Elm Fork Trinity River route is checked for Corps jurisdiction.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

What is already in the ground near the City of St. Jo system?

The City of St. Jo public water system uses groundwater wells and reports 488 service connections serving 881 people, so a nearby bore route needs to account for water lines. Montague County electric service is reported by Oncor Electric Delivery Company, Texas-New Mexico Power, Cooke County Electric Cooperative Association and Wise Electric Cooperative. We confirm the line owner for the specific route before planning an electric conduit bore near Boggess Street.

Line ownerWhat it isSourceSize
City of St. JoPublic water systemGroundwater wells488 connections, 881 people served
Oncor Electric Delivery Company, Texas-New Mexico Power, Cooke County Electric Cooperative Association and Wise Electric CooperativeElectric utilities reporting service in Montague CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put St. Jo’s median housing year at 1971; 38 percent of housing was built before 1960, 51 percent from 1960 to 1999 and 11 percent in 2000 or later. A replacement bore near Williams Street may have to account for older buried lines, while a new service follows its own route. We hydrovac marked utilities before drilling near them, since paint shows location but not depth.

Large HDPE conduit reels staged on a Rotate A Reel trailer for a fiber and utility installation in Oklahoma
HDPE conduit reels on a reel trailer for a fiber and utility installation in Oklahoma.

How far is St. Jo from Montague and our Yukon yard?

St. Jo is in Montague County, at an elevation of 1,142 feet, and covers 1.08 square miles. In Montague County, we use ZIP code 76265 to verify the service location before coordinating underground boring in St. Jo. Muenster is 9.0 miles east, Montague is 11.6 miles west, Nocona Hills is 12.4 miles northwest, Myra is 13.0 miles east and Nocona is 13.4 miles northwest. Bowie, the nearest larger city, is 20.9 miles southwest. From our Yukon yard, St. Jo is 170 road miles and a 3.4 hour drive, a distance that affects crew mobilization.

Places near St. Jo

What would we bore near Howell Street in St. Jo?

  • Highway crossing: A route beneath US 82 is bored under the pavement, with the utility owner’s TxDOT permit and the required cover guiding the plan.
  • Water service: A connection near the City of St. Jo system follows the proposed service route, with existing groundwater lines exposed before drilling near them.
  • Street bore: A proposed conduit beneath Howell Street can pass under the pavement, with marked lines pothole exposed before the drill approaches.
  • Creek crossing: A route beneath the Elm Fork Trinity River needs a depth plan for the channel and a check for Corps jurisdiction.
  • Fiber route: A fiber conduit along Boggess Street can be planned around marked utilities and the street’s existing pavement.
  • FM road bore: A route beneath FM 677 needs the applicable TxDOT right of way permit and a bore plan matched to the line type.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What do you need to quote a St. Jo bore near the Elm Fork Trinity River?

A map pin matters for a St. Jo quote because a route near the Elm Fork Trinity River has different crossing conditions than one under Howell Street. Send the job address or pin, what is going in the ground, the pipe or conduit size and the footage. A sketch or plans help us see the intended route and crossings.

The job’s ground, crossings and logistics shape the quote for a St. Jo route. Windthorst soil and mapped clay affect drilling and reaming; a crossing at US 82 or the Elm Fork Trinity River adds route planning. Pavement, exposed utilities, pits, excavator time and sand backfill can also change the work. Mobilization matters because St. Jo is 170 road miles from Yukon. High profile or emergency work also affects the job plan.

Questions people ask about boring in St. Jo

Does Trinity Boring Solutions take jobs in St. Jo and Montague County, and who staffs them?

Yes. We take directional boring jobs in St. Jo and across Montague County, with our own crews or crews from vetted partner drilling contractors at satellite yards. Regardless of which crew is on site, we remain your contact from the first call through the bore log for crossings near US 82 in St. Jo. A route under Boggess Street can be scoped with the same point of contact.

Who owns electric lines in St. Jo and Montague County, and who confirms conduit specs?

Electric service reported in Montague County includes Oncor Electric Delivery Company, Texas-New Mexico Power, Cooke County Electric Cooperative Association and Wise Electric Cooperative. That list does not identify the provider at every St. Jo address. The line owner confirms conduit requirements for the specific route before we plan a bore near US 82 or a city street.

Does the city or county control Howell Street in St. Jo, and must it be cut?

Howell Street is a city street because St. Jo is incorporated. A directional bore can pass below its pavement, leaving the surface uncut while pits remain in the dirt on each side. Before the drill approaches a marked line along Howell Street, we hydrovac expose it to learn its depth.

Do older homes near Williams Street in St. Jo mean replacement lines need a different bore?

They can mean a replacement route must account for older buried lines. The American Community Survey 2019 to 2023 estimates put St. Jo’s median housing year at 1971, with 38 percent built before 1960. Near Williams Street, the route and marked utilities matter more than the age statistic alone; we expose marked lines before drilling near them.

Can groundwater or flood prone ground affect bore pits near the Elm Fork Trinity River in St. Jo?

Yes. The USDA soil survey maps flood prone soils across 10 percent of St. Jo and seasonal water tables within 60 inches across 4 percent. Near the Elm Fork Trinity River, those conditions can affect pit placement and water management. A river crossing also gets checked for Corps jurisdiction during planning.

Does Windthorst soil in St. Jo corrode steel, and what pipe should we use?

The soil survey maps high steel corrosion risk across 40 percent of St. Jo, so the line owner should consider the material and coating for steel casing or tracer wire. Windthorst soil is one mapped local series, but a specific route needs its own review. HDPE does not share steel’s corrosion exposure; the owner selects the pipe material.

How much 811 notice does a bore on Boggess Street in St. Jo need, and what if marks move?

For a Boggess Street bore, Texas811 needs notice at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before work. We plan boring near FM 677 in St. Jo with Texas811’s at least two working days in mind. If work slips more than 14 days past the original notice, make a new request; worn or moved marks must be refreshed before work continues.

How far is St. Jo from Yukon by way of Bowie, and does that affect the job?

St. Jo is 170 road miles and a 3.4 hour drive from our Yukon yard; Bowie is 20.9 miles southwest of St. Jo. That distance affects mobilization for a bore near FM 677, especially when the scope needs added equipment or time on site. The route details help us plan the crew and setup.

What affects the cost of a directional bore under US 82 in St. Jo?

The price depends on the job scope, not just the length. For US 82, the line size, required cover, permit plan and pavement crossing shape the work. Windthorst soil and clay affect drilling, while exposed utilities, pits, creek crossings and backfill add tasks. St. Jo’s 170 road miles from Yukon also affects mobilization; high profile or emergency work can change the plan.

Where the St. Jo facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in St. Jo

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in St. Jo, Texas

Type the address of your job in St. Jo. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for St. Jo

Same county: Sunset · Ringgold. All counties: Texas county list.